Macros to access the register of processors using the new MIPS
Multithreading ASE, also know as MT ASE.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/include/asm-mips/mipsmtregs.h b/include/asm-mips/mipsmtregs.h
new file mode 100644
diff --git a/include/asm-mips/mipsmtregs.h b/include/asm-mips/mipsmtregs.h
new file mode 100644
index 0000000..9aaefc1
--- /dev/null
+++ b/include/asm-mips/mipsmtregs.h
@@ -0,0 +1,367 @@
+/*
+ * MT regs definitions, follows on from mipsregs.h
+ * Copyright (C) 2004 - 2005 MIPS Technologies, Inc. All rights reserved.
+ * Elizabeth Clarke et. al.
+ *
+ */
+#ifndef _ASM_MIPSMTREGS_H
+#define _ASM_MIPSMTREGS_H
+
+#include <asm/war.h>
+
+#ifndef __ASSEMBLY__
+
+/*
+ * C macros
+ */
+
+#define read_c0_mvpcontrol() __read_32bit_c0_register($0, 1)
+#define write_c0_mvpcontrol(val) __write_32bit_c0_register($0, 1, val)
+
+#define read_c0_mvpconf0() __read_32bit_c0_register($0, 2)
+#define read_c0_mvpconf1() __read_32bit_c0_register($0, 3)
+
+#define read_c0_vpecontrol() __read_32bit_c0_register($1, 1)
+#define write_c0_vpecontrol(val) __write_32bit_c0_register($1, 1, val)
+
+#define read_c0_vpeconf0() __read_32bit_c0_register($1, 2)
+#define write_c0_vpeconf0(val) __write_32bit_c0_register($1, 2, val)
+
+#define read_c0_tcstatus() __read_32bit_c0_register($2, 1)
+#define write_c0_tcstatus(val) __write_32bit_c0_register($2, 1, val)
+
+#define read_c0_tcbind() __read_32bit_c0_register($2, 2)
+
+#define read_c0_tccontext() __read_32bit_c0_register($2, 5)
+#define write_c0_tccontext(val) __write_32bit_c0_register($2, 5, val)
+
+#else /* Assembly */
+/*
+ * Macros for use in assembly language code
+ */
+
+#define CP0_MVPCONTROL $0,1
+#define CP0_MVPCONF0 $0,2
+#define CP0_MVPCONF1 $0,3
+#define CP0_VPECONTROL $1,1
+#define CP0_VPECONF0 $1,2
+#define CP0_VPECONF1 $1,3
+#define CP0_YQMASK $1,4
+#define CP0_VPESCHEDULE $1,5
+#define CP0_VPESCHEFBK $1,6
+#define CP0_TCSTATUS $2,1
+#define CP0_TCBIND $2,2
+#define CP0_TCRESTART $2,3
+#define CP0_TCHALT $2,4
+#define CP0_TCCONTEXT $2,5
+#define CP0_TCSCHEDULE $2,6
+#define CP0_TCSCHEFBK $2,7
+#define CP0_SRSCONF0 $6,1
+#define CP0_SRSCONF1 $6,2
+#define CP0_SRSCONF2 $6,3
+#define CP0_SRSCONF3 $6,4
+#define CP0_SRSCONF4 $6,5
+
+#endif
+
+/* MVPControl fields */
+#define MVPCONTROL_EVP (_ULCAST_(1))
+
+#define MVPCONTROL_VPC_SHIFT 1
+#define MVPCONTROL_VPC (_ULCAST_(1) << MVPCONTROL_VPC_SHIFT)
+
+#define MVPCONTROL_STLB_SHIFT 2
+#define MVPCONTROL_STLB (_ULCAST_(1) << MVPCONTROL_STLB_SHIFT)
+
+
+/* MVPConf0 fields */
+#define MVPCONF0_PTC_SHIFT 0
+#define MVPCONF0_PTC ( _ULCAST_(0xff))
+#define MVPCONF0_PVPE_SHIFT 10
+#define MVPCONF0_PVPE ( _ULCAST_(0xf) << MVPCONF0_PVPE_SHIFT)
+#define MVPCONF0_TCA_SHIFT 15
+#define MVPCONF0_TCA ( _ULCAST_(1) << MVPCONF0_TCA_SHIFT)
+#define MVPCONF0_PTLBE_SHIFT 16
+#define MVPCONF0_PTLBE (_ULCAST_(0x3ff) << MVPCONF0_PTLBE_SHIFT)
+#define MVPCONF0_TLBS_SHIFT 29
+#define MVPCONF0_TLBS (_ULCAST_(1) << MVPCONF0_TLBS_SHIFT)
+#define MVPCONF0_M_SHIFT 31
+#define MVPCONF0_M (_ULCAST_(0x1) << MVPCONF0_M_SHIFT)
+
+
+/* config3 fields */
+#define CONFIG3_MT_SHIFT 2
+#define CONFIG3_MT (_ULCAST_(1) << CONFIG3_MT_SHIFT)
+
+
+/* VPEControl fields (per VPE) */
+#define VPECONTROL_TARGTC (_ULCAST_(0xff))
+
+#define VPECONTROL_TE_SHIFT 15
+#define VPECONTROL_TE (_ULCAST_(1) << VPECONTROL_TE_SHIFT)
+#define VPECONTROL_EXCPT_SHIFT 16
+#define VPECONTROL_EXCPT (_ULCAST_(0x7) << VPECONTROL_EXCPT_SHIFT)
+
+/* Thread Exception Codes for EXCPT field */
+#define THREX_TU 0
+#define THREX_TO 1
+#define THREX_IYQ 2
+#define THREX_GSX 3
+#define THREX_YSCH 4
+#define THREX_GSSCH 5
+
+#define VPECONTROL_GSI_SHIFT 20
+#define VPECONTROL_GSI (_ULCAST_(1) << VPECONTROL_GSI_SHIFT)
+#define VPECONTROL_YSI_SHIFT 21
+#define VPECONTROL_YSI (_ULCAST_(1) << VPECONTROL_YSI_SHIFT)
+
+/* VPEConf0 fields (per VPE) */
+#define VPECONF0_VPA_SHIFT 0
+#define VPECONF0_VPA (_ULCAST_(1) << VPECONF0_VPA_SHIFT)
+#define VPECONF0_MVP_SHIFT 1
+#define VPECONF0_MVP (_ULCAST_(1) << VPECONF0_MVP_SHIFT)
+#define VPECONF0_XTC_SHIFT 21
+#define VPECONF0_XTC (_ULCAST_(0xff) << VPECONF0_XTC_SHIFT)
+
+/* TCStatus fields (per TC) */
+#define TCSTATUS_TASID (_ULCAST_(0xff))
+#define TCSTATUS_IXMT_SHIFT 10
+#define TCSTATUS_IXMT (_ULCAST_(1) << TCSTATUS_IXMT_SHIFT)
+#define TCSTATUS_TKSU_SHIFT 11
+#define TCSTATUS_TKSU (_ULCAST_(3) << TCSTATUS_TKSU_SHIFT)
+#define TCSTATUS_A_SHIFT 13
+#define TCSTATUS_A (_ULCAST_(1) << TCSTATUS_A_SHIFT)
+#define TCSTATUS_DA_SHIFT 15
+#define TCSTATUS_DA (_ULCAST_(1) << TCSTATUS_DA_SHIFT)
+#define TCSTATUS_DT_SHIFT 20
+#define TCSTATUS_DT (_ULCAST_(1) << TCSTATUS_DT_SHIFT)
+#define TCSTATUS_TDS_SHIFT 21
+#define TCSTATUS_TDS (_ULCAST_(1) << TCSTATUS_TDS_SHIFT)
+#define TCSTATUS_TSST_SHIFT 22
+#define TCSTATUS_TSST (_ULCAST_(1) << TCSTATUS_TSST_SHIFT)
+#define TCSTATUS_RNST_SHIFT 23
+#define TCSTATUS_RNST (_ULCAST_(3) << TCSTATUS_RNST_SHIFT)
+/* Codes for RNST */
+#define TC_RUNNING 0
+#define TC_WAITING 1
+#define TC_YIELDING 2
+#define TC_GATED 3
+
+#define TCSTATUS_TMX_SHIFT 27
+#define TCSTATUS_TMX (_ULCAST_(1) << TCSTATUS_TMX_SHIFT)
+/* TCStatus TCU bits can use same definitions/offsets as CU bits in Status */
+
+/* TCBind */
+#define TCBIND_CURVPE_SHIFT 0
+#define TCBIND_CURVPE (_ULCAST_(0xf))
+
+#define TCBIND_CURTC_SHIFT 21
+
+#define TCBIND_CURTC (_ULCAST_(0xff) << TCBIND_CURTC_SHIFT)
+
+/* TCHalt */
+#define TCHALT_H (_ULCAST_(1))
+
+#ifndef __ASSEMBLY__
+
+extern void mips_mt_regdump(void);
+
+static inline unsigned int dvpe(void)
+{
+ int res = 0;
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " .set noat \n"
+ " .set mips32r2 \n"
+ " move $1, %0 \n"
+ " .word 0x41610001 # dvpe $1 \n"
+ " ehb \n"
+ " .set pop \n"
+ : "=r" (res));
+
+ instruction_hazard();
+
+ return res;
+}
+
+static inline void __raw_evpe(void)
+{
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " .set noat \n"
+ " .set mips32r2 \n"
+ " .word 0x41600021 # evpe \n"
+ " ehb \n"
+ " .set pop \n");
+}
+
+/* Enable multiMT if previous suggested it should be.
+ EMT_ENABLE to force */
+
+#define EVPE_ENABLE MVPCONTROL_EVP
+
+static inline void evpe(int previous)
+{
+ if ((previous & MVPCONTROL_EVP))
+ __raw_evpe();
+}
+
+static inline unsigned int dmt(void)
+{
+ int res;
+
+ __asm__ __volatile__(
+ " .set noreorder \n"
+ " .set mips32r2 \n"
+ " dmt %0 \n"
+ " ehb \n"
+ " .set mips0 \n"
+ " .set reorder \n"
+ : "=r" (res));
+
+ instruction_hazard();
+
+ return res;
+}
+
+static inline void __raw_emt(void)
+{
+ __asm__ __volatile__(
+ " .set noreorder \n"
+ " .set mips32r2 \n"
+ " emt \n"
+ " ehb \n"
+ " .set mips0 \n"
+ " .set reorder");
+}
+
+/* enable multiVPE if previous suggested it should be.
+ EVPE_ENABLE to force */
+
+#define EMT_ENABLE VPECONTROL_TE
+
+static inline void emt(int previous)
+{
+ if ((previous & EMT_ENABLE))
+ __raw_emt();
+}
+
+static inline void ehb(void)
+{
+ __asm__ __volatile__("ehb");
+}
+
+#define mftc0(rt,sel) \
+({ \
+ unsigned long __res; \
+ \
+ __asm__ __volatile__( \
+ " .set noat\n\t" \
+ " mftc0\t%0," #rt ", " #sel "\n\t" \
+ " .set at\n\t" \
+ : "=r" (__res)); \
+ \
+ __res; \
+})
+
+#define mftgpr(rt) \
+({ \
+ unsigned long __res; \
+ \
+ __asm__ __volatile__( \
+ " .set noat \n" \
+ " mftgpr %0," #rt " \n" \
+ " .set at \n" \
+ : "=r" (__res)); \
+ \
+ __res; \
+})
+
+#define mftr(rt,u,sel) \
+({ \
+ unsigned long __res; \
+ \
+ __asm__ __volatile__( \
+ ".set noat\n\t" \
+ "mftr\t%0, " #rt ", " #u ", " #sel "\n\t" \
+ ".set at\n\t" \
+ : "=r" (__res)); \
+ \
+ __res; \
+})
+
+#define mttgpr(rd,v) \
+({ \
+ __asm__ __volatile__( \
+ "mttgpr %0," #rd \
+ : : "r" (v)); \
+})
+
+#define mttc0(rd,sel,v) \
+({ \
+ __asm__ __volatile__( \
+ "mttc0\t %0," #rd ", " #sel \
+ : : "r" (v)); \
+})
+
+
+#define mttr(rd,u,sel,v) \
+({ \
+ __asm__ __volatile__( \
+ "mttr %0," #rd ", " #u ", " #sel \
+ : : "r" (v)); \
+})
+
+
+#define settc(tc) \
+do { \
+ write_c0_vpecontrol((read_c0_vpecontrol()&~VPECONTROL_TARGTC) | (tc)); \
+ ehb(); \
+} while (0)
+
+
+/* you *must* set the target tc (settc) before trying to use these */
+#define read_vpe_c0_vpecontrol() mftc0($1, 1)
+#define write_vpe_c0_vpecontrol(val) mttc0($1, 1, val)
+#define read_vpe_c0_vpeconf0() mftc0($1, 2)
+#define write_vpe_c0_vpeconf0(val) mttc0($1, 2, val)
+#define read_vpe_c0_status() mftc0($12, 0)
+#define write_vpe_c0_status(val) mttc0($12, 0, val)
+#define read_vpe_c0_cause() mftc0($13, 0)
+#define write_vpe_c0_cause(val) mttc0($13, 0, val)
+#define read_vpe_c0_config() mftc0($16, 0)
+#define write_vpe_c0_config(val) mttc0($16, 0, val)
+#define read_vpe_c0_config1() mftc0($16, 1)
+#define write_vpe_c0_config1(val) mttc0($16, 1, val)
+#define read_vpe_c0_config7() mftc0($16, 7)
+#define write_vpe_c0_config7(val) mttc0($16, 7, val)
+#define read_vpe_c0_ebase() mftc0($15,1)
+#define write_vpe_c0_ebase(val) mttc0($15, 1, val)
+#define write_vpe_c0_compare(val) mttc0($11, 0, val)
+
+
+/* TC */
+#define read_tc_c0_tcstatus() mftc0($2, 1)
+#define write_tc_c0_tcstatus(val) mttc0($2,1,val)
+#define read_tc_c0_tcbind() mftc0($2, 2)
+#define write_tc_c0_tcbind(val) mttc0($2,2,val)
+#define read_tc_c0_tcrestart() mftc0($2, 3)
+#define write_tc_c0_tcrestart(val) mttc0($2,3,val)
+#define read_tc_c0_tchalt() mftc0($2, 4)
+#define write_tc_c0_tchalt(val) mttc0($2,4,val)
+#define read_tc_c0_tccontext() mftc0($2, 5)
+#define write_tc_c0_tccontext(val) mttc0($2,5,val)
+
+/* GPR */
+#define read_tc_gpr_sp() mftgpr($29)
+#define write_tc_gpr_sp(val) mttgpr($29, val)
+#define read_tc_gpr_gp() mftgpr($28)
+#define write_tc_gpr_gp(val) mttgpr($28, val)
+
+
+#endif /* Not __ASSEMBLY__ */
+
+#endif