i40e: cleanup strings
This patch cleans up the strings that the driver prints during normal
operation and moves many strings into dev_dbg. It also cleans up
strings printed during reset.
Change-ID: I1835cc4e3c3b22596182b683284e6bb87eac61b2
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index acf0b20..f7b1753ac 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -3755,8 +3755,8 @@
NULL);
if (aq_ret) {
dev_info(&vsi->back->pdev->dev,
- "%s: AQ command Config VSI BW allocation per TC failed = %d\n",
- __func__, vsi->back->hw.aq.asq_last_status);
+ "AQ command Config VSI BW allocation per TC failed = %d\n",
+ vsi->back->hw.aq.asq_last_status);
return -EINVAL;
}
@@ -4364,7 +4364,7 @@
* for the warning interrupt will deal with the shutdown
* and recovery of the switch setup.
*/
- dev_info(&pf->pdev->dev, "GlobalR requested\n");
+ dev_dbg(&pf->pdev->dev, "GlobalR requested\n");
val = rd32(&pf->hw, I40E_GLGEN_RTRIG);
val |= I40E_GLGEN_RTRIG_GLOBR_MASK;
wr32(&pf->hw, I40E_GLGEN_RTRIG, val);
@@ -4375,7 +4375,7 @@
*
* Same as Global Reset, except does *not* include the MAC/PHY
*/
- dev_info(&pf->pdev->dev, "CoreR requested\n");
+ dev_dbg(&pf->pdev->dev, "CoreR requested\n");
val = rd32(&pf->hw, I40E_GLGEN_RTRIG);
val |= I40E_GLGEN_RTRIG_CORER_MASK;
wr32(&pf->hw, I40E_GLGEN_RTRIG, val);
@@ -4409,7 +4409,7 @@
* the switch, since we need to do all the recovery as
* for the Core Reset.
*/
- dev_info(&pf->pdev->dev, "PFR requested\n");
+ dev_dbg(&pf->pdev->dev, "PFR requested\n");
i40e_handle_reset_warning(pf);
} else if (reset_flags & (1 << __I40E_REINIT_REQUESTED)) {
@@ -4458,18 +4458,18 @@
&old_cfg->etscfg.prioritytable,
sizeof(new_cfg->etscfg.prioritytable))) {
need_reconfig = true;
- dev_info(&pf->pdev->dev, "ETS UP2TC changed.\n");
+ dev_dbg(&pf->pdev->dev, "ETS UP2TC changed.\n");
}
if (memcmp(&new_cfg->etscfg.tcbwtable,
&old_cfg->etscfg.tcbwtable,
sizeof(new_cfg->etscfg.tcbwtable)))
- dev_info(&pf->pdev->dev, "ETS TC BW Table changed.\n");
+ dev_dbg(&pf->pdev->dev, "ETS TC BW Table changed.\n");
if (memcmp(&new_cfg->etscfg.tsatable,
&old_cfg->etscfg.tsatable,
sizeof(new_cfg->etscfg.tsatable)))
- dev_info(&pf->pdev->dev, "ETS TSA Table changed.\n");
+ dev_dbg(&pf->pdev->dev, "ETS TSA Table changed.\n");
}
/* Check if PFC configuration has changed */
@@ -4477,7 +4477,7 @@
&old_cfg->pfc,
sizeof(new_cfg->pfc))) {
need_reconfig = true;
- dev_info(&pf->pdev->dev, "PFC config change detected.\n");
+ dev_dbg(&pf->pdev->dev, "PFC config change detected.\n");
}
/* Check if APP Table has changed */
@@ -4485,7 +4485,7 @@
&old_cfg->app,
sizeof(new_cfg->app))) {
need_reconfig = true;
- dev_info(&pf->pdev->dev, "APP Table change detected.\n");
+ dev_dbg(&pf->pdev->dev, "APP Table change detected.\n");
}
return need_reconfig;
@@ -4535,7 +4535,7 @@
/* No change detected in DCBX configs */
if (!memcmp(&tmp_dcbx_cfg, dcbx_cfg, sizeof(tmp_dcbx_cfg))) {
- dev_info(&pf->pdev->dev, "No change detected in DCBX configuration.\n");
+ dev_dbg(&pf->pdev->dev, "No change detected in DCBX configuration.\n");
goto exit;
}
@@ -4593,8 +4593,8 @@
struct i40e_vf *vf;
u16 vf_id;
- dev_info(&pf->pdev->dev, "%s: Rx Queue Number = %d QTX_CTL=0x%08x\n",
- __func__, queue, qtx_ctl);
+ dev_dbg(&pf->pdev->dev, "overflow Rx Queue Number = %d QTX_CTL=0x%08x\n",
+ queue, qtx_ctl);
/* Queue belongs to VF, find the VF and issue VF reset */
if (((qtx_ctl & I40E_QTX_CTL_PFVF_Q_MASK)
@@ -4946,7 +4946,7 @@
event.msg_size);
break;
case i40e_aqc_opc_lldp_update_mib:
- dev_info(&pf->pdev->dev, "ARQ: Update LLDP MIB event received\n");
+ dev_dbg(&pf->pdev->dev, "ARQ: Update LLDP MIB event received\n");
#ifdef CONFIG_I40E_DCB
rtnl_lock();
ret = i40e_handle_lldp_event(pf, &event);
@@ -4954,7 +4954,7 @@
#endif /* CONFIG_I40E_DCB */
break;
case i40e_aqc_opc_event_lan_overflow:
- dev_info(&pf->pdev->dev, "ARQ LAN queue overflow event received\n");
+ dev_dbg(&pf->pdev->dev, "ARQ LAN queue overflow event received\n");
i40e_handle_lan_overflow_event(pf, &event);
break;
case i40e_aqc_opc_send_msg_to_peer:
@@ -5231,7 +5231,7 @@
if (test_and_set_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state))
return 0;
- dev_info(&pf->pdev->dev, "Tearing down internal switch for reset\n");
+ dev_dbg(&pf->pdev->dev, "Tearing down internal switch for reset\n");
if (i40e_check_asq_alive(hw))
i40e_vc_notify_reset(pf);
@@ -5278,7 +5278,7 @@
if (test_bit(__I40E_DOWN, &pf->state))
goto end_core_reset;
- dev_info(&pf->pdev->dev, "Rebuilding internal switch\n");
+ dev_dbg(&pf->pdev->dev, "Rebuilding internal switch\n");
/* rebuild the basics for the AdminQ, HMC, and initial HW switch */
ret = i40e_init_adminq(&pf->hw);
@@ -5328,7 +5328,7 @@
* try to recover minimal use by getting the basic PF VSI working.
*/
if (pf->vsi[pf->lan_vsi]->uplink_seid != pf->mac_seid) {
- dev_info(&pf->pdev->dev, "attempting to rebuild switch\n");
+ dev_dbg(&pf->pdev->dev, "attempting to rebuild switch\n");
/* find the one VEB connected to the MAC, and find orphans */
for (v = 0; v < I40E_MAX_VEB; v++) {
if (!pf->veb[v])
@@ -5393,7 +5393,7 @@
dv.subbuild_version = 0;
i40e_aq_send_driver_version(&pf->hw, &dv, NULL);
- dev_info(&pf->pdev->dev, "PF reset done\n");
+ dev_info(&pf->pdev->dev, "reset complete\n");
end_core_reset:
clear_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state);
@@ -6293,12 +6293,8 @@
(pf->hw.func_caps.fd_filters_best_effort > 0)) {
pf->flags |= I40E_FLAG_FD_ATR_ENABLED;
pf->atr_sample_rate = I40E_DEFAULT_ATR_SAMPLE_RATE;
- dev_info(&pf->pdev->dev,
- "Flow Director ATR mode Enabled\n");
if (!(pf->flags & I40E_FLAG_MFP_ENABLED)) {
pf->flags |= I40E_FLAG_FD_SB_ENABLED;
- dev_info(&pf->pdev->dev,
- "Flow Director Side Band mode Enabled\n");
} else {
dev_info(&pf->pdev->dev,
"Flow Director Side Band mode Disabled in MFP mode\n");
@@ -6322,9 +6318,6 @@
pf->num_req_vfs = min_t(int,
pf->hw.func_caps.num_vfs,
I40E_MAX_VF_COUNT);
- dev_info(&pf->pdev->dev,
- "Number of VFs being requested for PF[%d] = %d\n",
- pf->hw.pf_id, pf->num_req_vfs);
}
#endif /* CONFIG_PCI_IOV */
pf->eeprom_version = 0xDEAD;
@@ -8131,7 +8124,7 @@
i40e_set_pci_config_data(hw, link_status);
- dev_info(&pdev->dev, "PCI Express: %s %s\n",
+ dev_info(&pdev->dev, "PCI-Express: %s %s\n",
(hw->bus.speed == i40e_bus_speed_8000 ? "Speed 8.0GT/s" :
hw->bus.speed == i40e_bus_speed_5000 ? "Speed 5.0GT/s" :
hw->bus.speed == i40e_bus_speed_2500 ? "Speed 2.5GT/s" :