gma500: Add support for Cedarview
Again this is similar but has some differences so we have a set of plug in
support. This does make the driver bigger than is needed in some respects
but the tradeoff for maintainability is huge.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
diff --git a/drivers/gpu/drm/gma500/cdv_intel_display.c b/drivers/gpu/drm/gma500/cdv_intel_display.c
new file mode 100644
index 0000000..7b97c60
--- /dev/null
+++ b/drivers/gpu/drm/gma500/cdv_intel_display.c
@@ -0,0 +1,1508 @@
+/*
+ * Copyright © 2006-2011 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors:
+ * Eric Anholt <eric@anholt.net>
+ */
+
+#include <linux/i2c.h>
+#include <linux/pm_runtime.h>
+
+#include <drm/drmP.h>
+#include "framebuffer.h"
+#include "psb_drv.h"
+#include "psb_intel_drv.h"
+#include "psb_intel_reg.h"
+#include "psb_intel_display.h"
+#include "power.h"
+#include "cdv_device.h"
+
+
+struct cdv_intel_range_t {
+ int min, max;
+};
+
+struct cdv_intel_p2_t {
+ int dot_limit;
+ int p2_slow, p2_fast;
+};
+
+struct cdv_intel_clock_t {
+ /* given values */
+ int n;
+ int m1, m2;
+ int p1, p2;
+ /* derived values */
+ int dot;
+ int vco;
+ int m;
+ int p;
+};
+
+#define INTEL_P2_NUM 2
+
+struct cdv_intel_limit_t {
+ struct cdv_intel_range_t dot, vco, n, m, m1, m2, p, p1;
+ struct cdv_intel_p2_t p2;
+};
+
+#define CDV_LIMIT_SINGLE_LVDS_96 0
+#define CDV_LIMIT_SINGLE_LVDS_100 1
+#define CDV_LIMIT_DAC_HDMI_27 2
+#define CDV_LIMIT_DAC_HDMI_96 3
+
+static const struct cdv_intel_limit_t cdv_intel_limits[] = {
+ { /* CDV_SIGNLE_LVDS_96MHz */
+ .dot = {.min = 20000, .max = 115500},
+ .vco = {.min = 1800000, .max = 3600000},
+ .n = {.min = 2, .max = 6},
+ .m = {.min = 60, .max = 160},
+ .m1 = {.min = 0, .max = 0},
+ .m2 = {.min = 58, .max = 158},
+ .p = {.min = 28, .max = 140},
+ .p1 = {.min = 2, .max = 10},
+ .p2 = {.dot_limit = 200000,
+ .p2_slow = 14, .p2_fast = 14},
+ },
+ { /* CDV_SINGLE_LVDS_100MHz */
+ .dot = {.min = 20000, .max = 115500},
+ .vco = {.min = 1800000, .max = 3600000},
+ .n = {.min = 2, .max = 6},
+ .m = {.min = 60, .max = 160},
+ .m1 = {.min = 0, .max = 0},
+ .m2 = {.min = 58, .max = 158},
+ .p = {.min = 28, .max = 140},
+ .p1 = {.min = 2, .max = 10},
+ /* The single-channel range is 25-112Mhz, and dual-channel
+ * is 80-224Mhz. Prefer single channel as much as possible.
+ */
+ .p2 = {.dot_limit = 200000, .p2_slow = 14, .p2_fast = 14},
+ },
+ { /* CDV_DAC_HDMI_27MHz */
+ .dot = {.min = 20000, .max = 400000},
+ .vco = {.min = 1809000, .max = 3564000},
+ .n = {.min = 1, .max = 1},
+ .m = {.min = 67, .max = 132},
+ .m1 = {.min = 0, .max = 0},
+ .m2 = {.min = 65, .max = 130},
+ .p = {.min = 5, .max = 90},
+ .p1 = {.min = 1, .max = 9},
+ .p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 5},
+ },
+ { /* CDV_DAC_HDMI_96MHz */
+ .dot = {.min = 20000, .max = 400000},
+ .vco = {.min = 1800000, .max = 3600000},
+ .n = {.min = 2, .max = 6},
+ .m = {.min = 60, .max = 160},
+ .m1 = {.min = 0, .max = 0},
+ .m2 = {.min = 58, .max = 158},
+ .p = {.min = 5, .max = 100},
+ .p1 = {.min = 1, .max = 10},
+ .p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 5},
+ },
+};
+
+#define _wait_for(COND, MS, W) ({ \
+ unsigned long timeout__ = jiffies + msecs_to_jiffies(MS); \
+ int ret__ = 0; \
+ while (!(COND)) { \
+ if (time_after(jiffies, timeout__)) { \
+ ret__ = -ETIMEDOUT; \
+ break; \
+ } \
+ if (W && !in_dbg_master()) \
+ msleep(W); \
+ } \
+ ret__; \
+})
+
+#define wait_for(COND, MS) _wait_for(COND, MS, 1)
+
+
+static int cdv_sb_read(struct drm_device *dev, u32 reg, u32 *val)
+{
+ int ret;
+
+ ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000);
+ if (ret) {
+ DRM_ERROR("timeout waiting for SB to idle before read\n");
+ return ret;
+ }
+
+ REG_WRITE(SB_ADDR, reg);
+ REG_WRITE(SB_PCKT,
+ SET_FIELD(SB_OPCODE_READ, SB_OPCODE) |
+ SET_FIELD(SB_DEST_DPLL, SB_DEST) |
+ SET_FIELD(0xf, SB_BYTE_ENABLE));
+
+ ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000);
+ if (ret) {
+ DRM_ERROR("timeout waiting for SB to idle after read\n");
+ return ret;
+ }
+
+ *val = REG_READ(SB_DATA);
+
+ return 0;
+}
+
+static int cdv_sb_write(struct drm_device *dev, u32 reg, u32 val)
+{
+ int ret;
+ static bool dpio_debug = true;
+ u32 temp;
+
+ if (dpio_debug) {
+ if (cdv_sb_read(dev, reg, &temp) == 0)
+ DRM_DEBUG_KMS("0x%08x: 0x%08x (before)\n", reg, temp);
+ DRM_DEBUG_KMS("0x%08x: 0x%08x\n", reg, val);
+ }
+
+ ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000);
+ if (ret) {
+ DRM_ERROR("timeout waiting for SB to idle before write\n");
+ return ret;
+ }
+
+ REG_WRITE(SB_ADDR, reg);
+ REG_WRITE(SB_DATA, val);
+ REG_WRITE(SB_PCKT,
+ SET_FIELD(SB_OPCODE_WRITE, SB_OPCODE) |
+ SET_FIELD(SB_DEST_DPLL, SB_DEST) |
+ SET_FIELD(0xf, SB_BYTE_ENABLE));
+
+ ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000);
+ if (ret) {
+ DRM_ERROR("timeout waiting for SB to idle after write\n");
+ return ret;
+ }
+
+ if (dpio_debug) {
+ if (cdv_sb_read(dev, reg, &temp) == 0)
+ DRM_DEBUG_KMS("0x%08x: 0x%08x (after)\n", reg, temp);
+ }
+
+ return 0;
+}
+
+/* Reset the DPIO configuration register. The BIOS does this at every
+ * mode set.
+ */
+static void cdv_sb_reset(struct drm_device *dev)
+{
+
+ REG_WRITE(DPIO_CFG, 0);
+ REG_READ(DPIO_CFG);
+ REG_WRITE(DPIO_CFG, DPIO_MODE_SELECT_0 | DPIO_CMN_RESET_N);
+}
+
+/* Unlike most Intel display engines, on Cedarview the DPLL registers
+ * are behind this sideband bus. They must be programmed while the
+ * DPLL reference clock is on in the DPLL control register, but before
+ * the DPLL is enabled in the DPLL control register.
+ */
+static int
+cdv_dpll_set_clock_cdv(struct drm_device *dev, struct drm_crtc *crtc,
+ struct cdv_intel_clock_t *clock)
+{
+ struct psb_intel_crtc *psb_crtc =
+ to_psb_intel_crtc(crtc);
+ int pipe = psb_crtc->pipe;
+ u32 m, n_vco, p;
+ int ret = 0;
+ int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
+ u32 ref_value;
+
+ cdv_sb_reset(dev);
+
+ if ((REG_READ(dpll_reg) & DPLL_SYNCLOCK_ENABLE) == 0) {
+ DRM_ERROR("Attempting to set DPLL with refclk disabled\n");
+ return -EBUSY;
+ }
+
+ /* Follow the BIOS and write the REF/SFR Register. Hardcoded value */
+ ref_value = 0x68A701;
+
+ cdv_sb_write(dev, SB_REF_SFR(pipe), ref_value);
+
+ /* We don't know what the other fields of these regs are, so
+ * leave them in place.
+ */
+ ret = cdv_sb_read(dev, SB_M(pipe), &m);
+ if (ret)
+ return ret;
+ m &= ~SB_M_DIVIDER_MASK;
+ m |= ((clock->m2) << SB_M_DIVIDER_SHIFT);
+ ret = cdv_sb_write(dev, SB_M(pipe), m);
+ if (ret)
+ return ret;
+
+ ret = cdv_sb_read(dev, SB_N_VCO(pipe), &n_vco);
+ if (ret)
+ return ret;
+
+ /* Follow the BIOS to program the N_DIVIDER REG */
+ n_vco &= 0xFFFF;
+ n_vco |= 0x107;
+ n_vco &= ~(SB_N_VCO_SEL_MASK |
+ SB_N_DIVIDER_MASK |
+ SB_N_CB_TUNE_MASK);
+
+ n_vco |= ((clock->n) << SB_N_DIVIDER_SHIFT);
+
+ if (clock->vco < 2250000) {
+ n_vco |= (2 << SB_N_CB_TUNE_SHIFT);
+ n_vco |= (0 << SB_N_VCO_SEL_SHIFT);
+ } else if (clock->vco < 2750000) {
+ n_vco |= (1 << SB_N_CB_TUNE_SHIFT);
+ n_vco |= (1 << SB_N_VCO_SEL_SHIFT);
+ } else if (clock->vco < 3300000) {
+ n_vco |= (0 << SB_N_CB_TUNE_SHIFT);
+ n_vco |= (2 << SB_N_VCO_SEL_SHIFT);
+ } else {
+ n_vco |= (0 << SB_N_CB_TUNE_SHIFT);
+ n_vco |= (3 << SB_N_VCO_SEL_SHIFT);
+ }
+
+ ret = cdv_sb_write(dev, SB_N_VCO(pipe), n_vco);
+ if (ret)
+ return ret;
+
+ ret = cdv_sb_read(dev, SB_P(pipe), &p);
+ if (ret)
+ return ret;
+ p &= ~(SB_P2_DIVIDER_MASK | SB_P1_DIVIDER_MASK);
+ p |= SET_FIELD(clock->p1, SB_P1_DIVIDER);
+ switch (clock->p2) {
+ case 5:
+ p |= SET_FIELD(SB_P2_5, SB_P2_DIVIDER);
+ break;
+ case 10:
+ p |= SET_FIELD(SB_P2_10, SB_P2_DIVIDER);
+ break;
+ case 14:
+ p |= SET_FIELD(SB_P2_14, SB_P2_DIVIDER);
+ break;
+ case 7:
+ p |= SET_FIELD(SB_P2_7, SB_P2_DIVIDER);
+ break;
+ default:
+ DRM_ERROR("Bad P2 clock: %d\n", clock->p2);
+ return -EINVAL;
+ }
+ ret = cdv_sb_write(dev, SB_P(pipe), p);
+ if (ret)
+ return ret;
+
+ /* always Program the Lane Register for the Pipe A*/
+ if (pipe == 0) {
+ /* Program the Lane0/1 for HDMI B */
+ u32 lane_reg, lane_value;
+
+ lane_reg = PSB_LANE0;
+ cdv_sb_read(dev, lane_reg, &lane_value);
+ lane_value &= ~(LANE_PLL_MASK);
+ lane_value |= LANE_PLL_ENABLE;
+ cdv_sb_write(dev, lane_reg, lane_value);
+
+ lane_reg = PSB_LANE1;
+ cdv_sb_read(dev, lane_reg, &lane_value);
+ lane_value &= ~(LANE_PLL_MASK);
+ lane_value |= LANE_PLL_ENABLE;
+ cdv_sb_write(dev, lane_reg, lane_value);
+
+ /* Program the Lane2/3 for HDMI C */
+ lane_reg = PSB_LANE2;
+ cdv_sb_read(dev, lane_reg, &lane_value);
+ lane_value &= ~(LANE_PLL_MASK);
+ lane_value |= LANE_PLL_ENABLE;
+ cdv_sb_write(dev, lane_reg, lane_value);
+
+ lane_reg = PSB_LANE3;
+ cdv_sb_read(dev, lane_reg, &lane_value);
+ lane_value &= ~(LANE_PLL_MASK);
+ lane_value |= LANE_PLL_ENABLE;
+ cdv_sb_write(dev, lane_reg, lane_value);
+ }
+
+ return 0;
+}
+
+/*
+ * Returns whether any output on the specified pipe is of the specified type
+ */
+bool cdv_intel_pipe_has_type(struct drm_crtc *crtc, int type)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct drm_connector *l_entry;
+
+ list_for_each_entry(l_entry, &mode_config->connector_list, head) {
+ if (l_entry->encoder && l_entry->encoder->crtc == crtc) {
+ struct psb_intel_output *psb_intel_output =
+ to_psb_intel_output(l_entry);
+ if (psb_intel_output->type == type)
+ return true;
+ }
+ }
+ return false;
+}
+
+static const struct cdv_intel_limit_t *cdv_intel_limit(struct drm_crtc *crtc,
+ int refclk)
+{
+ const struct cdv_intel_limit_t *limit;
+ if (cdv_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+ /*
+ * Now only single-channel LVDS is supported on CDV. If it is
+ * incorrect, please add the dual-channel LVDS.
+ */
+ if (refclk == 96000)
+ limit = &cdv_intel_limits[CDV_LIMIT_SINGLE_LVDS_96];
+ else
+ limit = &cdv_intel_limits[CDV_LIMIT_SINGLE_LVDS_100];
+ } else {
+ if (refclk == 27000)
+ limit = &cdv_intel_limits[CDV_LIMIT_DAC_HDMI_27];
+ else
+ limit = &cdv_intel_limits[CDV_LIMIT_DAC_HDMI_96];
+ }
+ return limit;
+}
+
+/* m1 is reserved as 0 in CDV, n is a ring counter */
+static void cdv_intel_clock(struct drm_device *dev,
+ int refclk, struct cdv_intel_clock_t *clock)
+{
+ clock->m = clock->m2 + 2;
+ clock->p = clock->p1 * clock->p2;
+ clock->vco = (refclk * clock->m) / clock->n;
+ clock->dot = clock->vco / clock->p;
+}
+
+
+#define INTELPllInvalid(s) { /* ErrorF (s) */; return false; }
+static bool cdv_intel_PLL_is_valid(struct drm_crtc *crtc,
+ const struct cdv_intel_limit_t *limit,
+ struct cdv_intel_clock_t *clock)
+{
+ if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
+ INTELPllInvalid("p1 out of range\n");
+ if (clock->p < limit->p.min || limit->p.max < clock->p)
+ INTELPllInvalid("p out of range\n");
+ /* unnecessary to check the range of m(m1/M2)/n again */
+ if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
+ INTELPllInvalid("vco out of range\n");
+ /* XXX: We may need to be checking "Dot clock"
+ * depending on the multiplier, connector, etc.,
+ * rather than just a single range.
+ */
+ if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
+ INTELPllInvalid("dot out of range\n");
+
+ return true;
+}
+
+static bool cdv_intel_find_best_PLL(struct drm_crtc *crtc, int target,
+ int refclk,
+ struct cdv_intel_clock_t *best_clock)
+{
+ struct drm_device *dev = crtc->dev;
+ struct cdv_intel_clock_t clock;
+ const struct cdv_intel_limit_t *limit = cdv_intel_limit(crtc, refclk);
+ int err = target;
+
+
+ if (cdv_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+ (REG_READ(LVDS) & LVDS_PORT_EN) != 0) {
+ /*
+ * For LVDS, if the panel is on, just rely on its current
+ * settings for dual-channel. We haven't figured out how to
+ * reliably set up different single/dual channel state, if we
+ * even can.
+ */
+ if ((REG_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
+ LVDS_CLKB_POWER_UP)
+ clock.p2 = limit->p2.p2_fast;
+ else
+ clock.p2 = limit->p2.p2_slow;
+ } else {
+ if (target < limit->p2.dot_limit)
+ clock.p2 = limit->p2.p2_slow;
+ else
+ clock.p2 = limit->p2.p2_fast;
+ }
+
+ memset(best_clock, 0, sizeof(*best_clock));
+ clock.m1 = 0;
+ /* m1 is reserved as 0 in CDV, n is a ring counter.
+ So skip the m1 loop */
+ for (clock.n = limit->n.min; clock.n <= limit->n.max; clock.n++) {
+ for (clock.m2 = limit->m2.min; clock.m2 <= limit->m2.max;
+ clock.m2++) {
+ for (clock.p1 = limit->p1.min;
+ clock.p1 <= limit->p1.max;
+ clock.p1++) {
+ int this_err;
+
+ cdv_intel_clock(dev, refclk, &clock);
+
+ if (!cdv_intel_PLL_is_valid(crtc,
+ limit, &clock))
+ continue;
+
+ this_err = abs(clock.dot - target);
+ if (this_err < err) {
+ *best_clock = clock;
+ err = this_err;
+ }
+ }
+ }
+ }
+
+ return err != target;
+}
+
+int cdv_intel_pipe_set_base(struct drm_crtc *crtc,
+ int x, int y, struct drm_framebuffer *old_fb)
+{
+ struct drm_device *dev = crtc->dev;
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+ struct psb_framebuffer *psbfb = to_psb_fb(crtc->fb);
+ int pipe = psb_intel_crtc->pipe;
+ unsigned long start, offset;
+ int dspbase = (pipe == 0 ? DSPABASE : DSPBBASE);
+ int dspsurf = (pipe == 0 ? DSPASURF : DSPBSURF);
+ int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE;
+ int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
+ u32 dspcntr;
+ int ret = 0;
+
+ if (!gma_power_begin(dev, true))
+ return 0;
+
+ /* no fb bound */
+ if (!crtc->fb) {
+ dev_err(dev->dev, "No FB bound\n");
+ goto psb_intel_pipe_cleaner;
+ }
+
+
+ /* We are displaying this buffer, make sure it is actually loaded
+ into the GTT */
+ ret = psb_gtt_pin(psbfb->gtt);
+ if (ret < 0)
+ goto psb_intel_pipe_set_base_exit;
+ start = psbfb->gtt->offset;
+ offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8);
+
+ REG_WRITE(dspstride, crtc->fb->pitch);
+
+ dspcntr = REG_READ(dspcntr_reg);
+ dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
+
+ switch (crtc->fb->bits_per_pixel) {
+ case 8:
+ dspcntr |= DISPPLANE_8BPP;
+ break;
+ case 16:
+ if (crtc->fb->depth == 15)
+ dspcntr |= DISPPLANE_15_16BPP;
+ else
+ dspcntr |= DISPPLANE_16BPP;
+ break;
+ case 24:
+ case 32:
+ dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
+ break;
+ default:
+ dev_err(dev->dev, "Unknown color depth\n");
+ ret = -EINVAL;
+ goto psb_intel_pipe_set_base_exit;
+ }
+ REG_WRITE(dspcntr_reg, dspcntr);
+
+ dev_dbg(dev->dev,
+ "Writing base %08lX %08lX %d %d\n", start, offset, x, y);
+
+ REG_WRITE(dspbase, offset);
+ REG_READ(dspbase);
+ REG_WRITE(dspsurf, start);
+ REG_READ(dspsurf);
+
+psb_intel_pipe_cleaner:
+ /* If there was a previous display we can now unpin it */
+ if (old_fb)
+ psb_gtt_unpin(to_psb_fb(old_fb)->gtt);
+
+psb_intel_pipe_set_base_exit:
+ gma_power_end(dev);
+ return ret;
+}
+
+/**
+ * Sets the power management mode of the pipe and plane.
+ *
+ * This code should probably grow support for turning the cursor off and back
+ * on appropriately at the same time as we're turning the pipe off/on.
+ */
+static void cdv_intel_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+ struct drm_device *dev = crtc->dev;
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+ int pipe = psb_intel_crtc->pipe;
+ int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
+ int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
+ int dspbase_reg = (pipe == 0) ? DSPABASE : DSPBBASE;
+ int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
+ u32 temp;
+ bool enabled;
+
+ /* XXX: When our outputs are all unaware of DPMS modes other than off
+ * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
+ */
+ switch (mode) {
+ case DRM_MODE_DPMS_ON:
+ case DRM_MODE_DPMS_STANDBY:
+ case DRM_MODE_DPMS_SUSPEND:
+ /* Enable the DPLL */
+ temp = REG_READ(dpll_reg);
+ if ((temp & DPLL_VCO_ENABLE) == 0) {
+ REG_WRITE(dpll_reg, temp);
+ REG_READ(dpll_reg);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
+ REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
+ REG_READ(dpll_reg);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
+ REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
+ REG_READ(dpll_reg);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
+ }
+
+ /* Jim Bish - switch plan and pipe per scott */
+ /* Enable the plane */
+ temp = REG_READ(dspcntr_reg);
+ if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
+ REG_WRITE(dspcntr_reg,
+ temp | DISPLAY_PLANE_ENABLE);
+ /* Flush the plane changes */
+ REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
+ }
+
+ udelay(150);
+
+ /* Enable the pipe */
+ temp = REG_READ(pipeconf_reg);
+ if ((temp & PIPEACONF_ENABLE) == 0)
+ REG_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE);
+
+ psb_intel_crtc_load_lut(crtc);
+
+ /* Give the overlay scaler a chance to enable
+ * if it's on this pipe */
+ /* psb_intel_crtc_dpms_video(crtc, true); TODO */
+ break;
+ case DRM_MODE_DPMS_OFF:
+ /* Give the overlay scaler a chance to disable
+ * if it's on this pipe */
+ /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */
+
+ /* Disable the VGA plane that we never use */
+ REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
+
+ /* Jim Bish - changed pipe/plane here as well. */
+
+ /* Wait for vblank for the disable to take effect */
+ cdv_intel_wait_for_vblank(dev);
+
+ /* Next, disable display pipes */
+ temp = REG_READ(pipeconf_reg);
+ if ((temp & PIPEACONF_ENABLE) != 0) {
+ REG_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
+ REG_READ(pipeconf_reg);
+ }
+
+ /* Wait for vblank for the disable to take effect. */
+ cdv_intel_wait_for_vblank(dev);
+
+ udelay(150);
+
+ /* Disable display plane */
+ temp = REG_READ(dspcntr_reg);
+ if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
+ REG_WRITE(dspcntr_reg,
+ temp & ~DISPLAY_PLANE_ENABLE);
+ /* Flush the plane changes */
+ REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
+ REG_READ(dspbase_reg);
+ }
+
+ temp = REG_READ(dpll_reg);
+ if ((temp & DPLL_VCO_ENABLE) != 0) {
+ REG_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE);
+ REG_READ(dpll_reg);
+ }
+
+ /* Wait for the clocks to turn off. */
+ udelay(150);
+ break;
+ }
+ enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF;
+ /*Set FIFO Watermarks*/
+ REG_WRITE(DSPARB, 0x3F3E);
+}
+
+static void cdv_intel_crtc_prepare(struct drm_crtc *crtc)
+{
+ struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+ crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
+}
+
+static void cdv_intel_crtc_commit(struct drm_crtc *crtc)
+{
+ struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+ crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
+}
+
+void cdv_intel_encoder_prepare(struct drm_encoder *encoder)
+{
+ struct drm_encoder_helper_funcs *encoder_funcs =
+ encoder->helper_private;
+ /* lvds has its own version of prepare see cdv_intel_lvds_prepare */
+ encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
+}
+
+void cdv_intel_encoder_commit(struct drm_encoder *encoder)
+{
+ struct drm_encoder_helper_funcs *encoder_funcs =
+ encoder->helper_private;
+ /* lvds has its own version of commit see cdv_intel_lvds_commit */
+ encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
+}
+
+static bool cdv_intel_crtc_mode_fixup(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ return true;
+}
+
+
+/**
+ * Return the pipe currently connected to the panel fitter,
+ * or -1 if the panel fitter is not present or not in use
+ */
+static int cdv_intel_panel_fitter_pipe(struct drm_device *dev)
+{
+ u32 pfit_control;
+
+ pfit_control = REG_READ(PFIT_CONTROL);
+
+ /* See if the panel fitter is in use */
+ if ((pfit_control & PFIT_ENABLE) == 0)
+ return -1;
+ return (pfit_control >> 29) & 0x3;
+}
+
+static int cdv_intel_crtc_mode_set(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode,
+ int x, int y,
+ struct drm_framebuffer *old_fb)
+{
+ struct drm_device *dev = crtc->dev;
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+ int pipe = psb_intel_crtc->pipe;
+ int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
+ int dpll_md_reg = (psb_intel_crtc->pipe == 0) ? DPLL_A_MD : DPLL_B_MD;
+ int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
+ int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
+ int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
+ int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
+ int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
+ int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
+ int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
+ int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
+ int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE;
+ int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS;
+ int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
+ int refclk;
+ struct cdv_intel_clock_t clock;
+ u32 dpll = 0, dspcntr, pipeconf;
+ bool ok, is_sdvo = false, is_dvo = false;
+ bool is_crt = false, is_lvds = false, is_tv = false;
+ bool is_hdmi = false;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct drm_connector *connector;
+
+ list_for_each_entry(connector, &mode_config->connector_list, head) {
+ struct psb_intel_output *psb_intel_output =
+ to_psb_intel_output(connector);
+
+ if (!connector->encoder
+ || connector->encoder->crtc != crtc)
+ continue;
+
+ switch (psb_intel_output->type) {
+ case INTEL_OUTPUT_LVDS:
+ is_lvds = true;
+ break;
+ case INTEL_OUTPUT_SDVO:
+ is_sdvo = true;
+ break;
+ case INTEL_OUTPUT_DVO:
+ is_dvo = true;
+ break;
+ case INTEL_OUTPUT_TVOUT:
+ is_tv = true;
+ break;
+ case INTEL_OUTPUT_ANALOG:
+ is_crt = true;
+ break;
+ case INTEL_OUTPUT_HDMI:
+ is_hdmi = true;
+ break;
+ }
+ }
+
+ refclk = 96000;
+
+ /* Hack selection about ref clk for CRT */
+ /* Select 27MHz as the reference clk for HDMI */
+ if (is_crt || is_hdmi)
+ refclk = 27000;
+
+ drm_mode_debug_printmodeline(adjusted_mode);
+
+ ok = cdv_intel_find_best_PLL(crtc, adjusted_mode->clock, refclk,
+ &clock);
+ if (!ok) {
+ dev_err(dev->dev, "Couldn't find PLL settings for mode!\n");
+ return 0;
+ }
+
+ dpll = DPLL_VGA_MODE_DIS;
+ if (is_tv) {
+ /* XXX: just matching BIOS for now */
+/* dpll |= PLL_REF_INPUT_TVCLKINBC; */
+ dpll |= 3;
+ }
+ dpll |= PLL_REF_INPUT_DREFCLK;
+
+ dpll |= DPLL_SYNCLOCK_ENABLE;
+ dpll |= DPLL_VGA_MODE_DIS;
+ if (is_lvds)
+ dpll |= DPLLB_MODE_LVDS;
+ else
+ dpll |= DPLLB_MODE_DAC_SERIAL;
+ /* dpll |= (2 << 11); */
+
+ /* setup pipeconf */
+ pipeconf = REG_READ(pipeconf_reg);
+
+ /* Set up the display plane register */
+ dspcntr = DISPPLANE_GAMMA_ENABLE;
+
+ if (pipe == 0)
+ dspcntr |= DISPPLANE_SEL_PIPE_A;
+ else
+ dspcntr |= DISPPLANE_SEL_PIPE_B;
+
+ dspcntr |= DISPLAY_PLANE_ENABLE;
+ pipeconf |= PIPEACONF_ENABLE;
+
+ REG_WRITE(dpll_reg, dpll | DPLL_VGA_MODE_DIS | DPLL_SYNCLOCK_ENABLE);
+ REG_READ(dpll_reg);
+
+ cdv_dpll_set_clock_cdv(dev, crtc, &clock);
+
+ udelay(150);
+
+
+ /* The LVDS pin pair needs to be on before the DPLLs are enabled.
+ * This is an exception to the general rule that mode_set doesn't turn
+ * things on.
+ */
+ if (is_lvds) {
+ u32 lvds = REG_READ(LVDS);
+
+ lvds |=
+ LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP |
+ LVDS_PIPEB_SELECT;
+ /* Set the B0-B3 data pairs corresponding to
+ * whether we're going to
+ * set the DPLLs for dual-channel mode or not.
+ */
+ if (clock.p2 == 7)
+ lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
+ else
+ lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
+
+ /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
+ * appropriately here, but we need to look more
+ * thoroughly into how panels behave in the two modes.
+ */
+
+ REG_WRITE(LVDS, lvds);
+ REG_READ(LVDS);
+ }
+
+ dpll |= DPLL_VCO_ENABLE;
+
+ /* Disable the panel fitter if it was on our pipe */
+ if (cdv_intel_panel_fitter_pipe(dev) == pipe)
+ REG_WRITE(PFIT_CONTROL, 0);
+
+ DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
+ drm_mode_debug_printmodeline(mode);
+
+ REG_WRITE(dpll_reg,
+ (REG_READ(dpll_reg) & ~DPLL_LOCK) | DPLL_VCO_ENABLE);
+ REG_READ(dpll_reg);
+ /* Wait for the clocks to stabilize. */
+ udelay(150); /* 42 usec w/o calibration, 110 with. rounded up. */
+
+ if (!(REG_READ(dpll_reg) & DPLL_LOCK)) {
+ dev_err(dev->dev, "Failed to get DPLL lock\n");
+ return -EBUSY;
+ }
+
+ {
+ int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
+ REG_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) | ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT));
+ }
+
+ REG_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) |
+ ((adjusted_mode->crtc_htotal - 1) << 16));
+ REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) |
+ ((adjusted_mode->crtc_hblank_end - 1) << 16));
+ REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) |
+ ((adjusted_mode->crtc_hsync_end - 1) << 16));
+ REG_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) |
+ ((adjusted_mode->crtc_vtotal - 1) << 16));
+ REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) |
+ ((adjusted_mode->crtc_vblank_end - 1) << 16));
+ REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) |
+ ((adjusted_mode->crtc_vsync_end - 1) << 16));
+ /* pipesrc and dspsize control the size that is scaled from,
+ * which should always be the user's requested size.
+ */
+ REG_WRITE(dspsize_reg,
+ ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1));
+ REG_WRITE(dsppos_reg, 0);
+ REG_WRITE(pipesrc_reg,
+ ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
+ REG_WRITE(pipeconf_reg, pipeconf);
+ REG_READ(pipeconf_reg);
+
+ cdv_intel_wait_for_vblank(dev);
+
+ REG_WRITE(dspcntr_reg, dspcntr);
+
+ /* Flush the plane changes */
+ {
+ struct drm_crtc_helper_funcs *crtc_funcs =
+ crtc->helper_private;
+ crtc_funcs->mode_set_base(crtc, x, y, old_fb);
+ }
+
+ cdv_intel_wait_for_vblank(dev);
+
+ return 0;
+}
+
+/** Loads the palette/gamma unit for the CRTC with the prepared values */
+void cdv_intel_crtc_load_lut(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_psb_private *dev_priv =
+ (struct drm_psb_private *)dev->dev_private;
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+ int palreg = PALETTE_A;
+ int i;
+
+ /* The clocks have to be on to load the palette. */
+ if (!crtc->enabled)
+ return;
+
+ switch (psb_intel_crtc->pipe) {
+ case 0:
+ break;
+ case 1:
+ palreg = PALETTE_B;
+ break;
+ case 2:
+ palreg = PALETTE_C;
+ break;
+ default:
+ dev_err(dev->dev, "Illegal Pipe Number.\n");
+ return;
+ }
+
+ if (gma_power_begin(dev, false)) {
+ for (i = 0; i < 256; i++) {
+ REG_WRITE(palreg + 4 * i,
+ ((psb_intel_crtc->lut_r[i] +
+ psb_intel_crtc->lut_adj[i]) << 16) |
+ ((psb_intel_crtc->lut_g[i] +
+ psb_intel_crtc->lut_adj[i]) << 8) |
+ (psb_intel_crtc->lut_b[i] +
+ psb_intel_crtc->lut_adj[i]));
+ }
+ gma_power_end(dev);
+ } else {
+ for (i = 0; i < 256; i++) {
+ dev_priv->save_palette_a[i] =
+ ((psb_intel_crtc->lut_r[i] +
+ psb_intel_crtc->lut_adj[i]) << 16) |
+ ((psb_intel_crtc->lut_g[i] +
+ psb_intel_crtc->lut_adj[i]) << 8) |
+ (psb_intel_crtc->lut_b[i] +
+ psb_intel_crtc->lut_adj[i]);
+ }
+
+ }
+}
+
+/**
+ * Save HW states of giving crtc
+ */
+static void cdv_intel_crtc_save(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ /* struct drm_psb_private *dev_priv =
+ (struct drm_psb_private *)dev->dev_private; */
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+ struct psb_intel_crtc_state *crtc_state = psb_intel_crtc->crtc_state;
+ int pipeA = (psb_intel_crtc->pipe == 0);
+ uint32_t paletteReg;
+ int i;
+
+ if (!crtc_state) {
+ dev_dbg(dev->dev, "No CRTC state found\n");
+ return;
+ }
+
+ crtc_state->saveDSPCNTR = REG_READ(pipeA ? DSPACNTR : DSPBCNTR);
+ crtc_state->savePIPECONF = REG_READ(pipeA ? PIPEACONF : PIPEBCONF);
+ crtc_state->savePIPESRC = REG_READ(pipeA ? PIPEASRC : PIPEBSRC);
+ crtc_state->saveFP0 = REG_READ(pipeA ? FPA0 : FPB0);
+ crtc_state->saveFP1 = REG_READ(pipeA ? FPA1 : FPB1);
+ crtc_state->saveDPLL = REG_READ(pipeA ? DPLL_A : DPLL_B);
+ crtc_state->saveHTOTAL = REG_READ(pipeA ? HTOTAL_A : HTOTAL_B);
+ crtc_state->saveHBLANK = REG_READ(pipeA ? HBLANK_A : HBLANK_B);
+ crtc_state->saveHSYNC = REG_READ(pipeA ? HSYNC_A : HSYNC_B);
+ crtc_state->saveVTOTAL = REG_READ(pipeA ? VTOTAL_A : VTOTAL_B);
+ crtc_state->saveVBLANK = REG_READ(pipeA ? VBLANK_A : VBLANK_B);
+ crtc_state->saveVSYNC = REG_READ(pipeA ? VSYNC_A : VSYNC_B);
+ crtc_state->saveDSPSTRIDE = REG_READ(pipeA ? DSPASTRIDE : DSPBSTRIDE);
+
+ /*NOTE: DSPSIZE DSPPOS only for psb*/
+ crtc_state->saveDSPSIZE = REG_READ(pipeA ? DSPASIZE : DSPBSIZE);
+ crtc_state->saveDSPPOS = REG_READ(pipeA ? DSPAPOS : DSPBPOS);
+
+ crtc_state->saveDSPBASE = REG_READ(pipeA ? DSPABASE : DSPBBASE);
+
+ DRM_DEBUG("(%x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x)\n",
+ crtc_state->saveDSPCNTR,
+ crtc_state->savePIPECONF,
+ crtc_state->savePIPESRC,
+ crtc_state->saveFP0,
+ crtc_state->saveFP1,
+ crtc_state->saveDPLL,
+ crtc_state->saveHTOTAL,
+ crtc_state->saveHBLANK,
+ crtc_state->saveHSYNC,
+ crtc_state->saveVTOTAL,
+ crtc_state->saveVBLANK,
+ crtc_state->saveVSYNC,
+ crtc_state->saveDSPSTRIDE,
+ crtc_state->saveDSPSIZE,
+ crtc_state->saveDSPPOS,
+ crtc_state->saveDSPBASE
+ );
+
+ paletteReg = pipeA ? PALETTE_A : PALETTE_B;
+ for (i = 0; i < 256; ++i)
+ crtc_state->savePalette[i] = REG_READ(paletteReg + (i << 2));
+}
+
+/**
+ * Restore HW states of giving crtc
+ */
+static void cdv_intel_crtc_restore(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ /* struct drm_psb_private * dev_priv =
+ (struct drm_psb_private *)dev->dev_private; */
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+ struct psb_intel_crtc_state *crtc_state = psb_intel_crtc->crtc_state;
+ /* struct drm_crtc_helper_funcs * crtc_funcs = crtc->helper_private; */
+ int pipeA = (psb_intel_crtc->pipe == 0);
+ uint32_t paletteReg;
+ int i;
+
+ if (!crtc_state) {
+ dev_dbg(dev->dev, "No crtc state\n");
+ return;
+ }
+
+ DRM_DEBUG(
+ "current:(%x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x)\n",
+ REG_READ(pipeA ? DSPACNTR : DSPBCNTR),
+ REG_READ(pipeA ? PIPEACONF : PIPEBCONF),
+ REG_READ(pipeA ? PIPEASRC : PIPEBSRC),
+ REG_READ(pipeA ? FPA0 : FPB0),
+ REG_READ(pipeA ? FPA1 : FPB1),
+ REG_READ(pipeA ? DPLL_A : DPLL_B),
+ REG_READ(pipeA ? HTOTAL_A : HTOTAL_B),
+ REG_READ(pipeA ? HBLANK_A : HBLANK_B),
+ REG_READ(pipeA ? HSYNC_A : HSYNC_B),
+ REG_READ(pipeA ? VTOTAL_A : VTOTAL_B),
+ REG_READ(pipeA ? VBLANK_A : VBLANK_B),
+ REG_READ(pipeA ? VSYNC_A : VSYNC_B),
+ REG_READ(pipeA ? DSPASTRIDE : DSPBSTRIDE),
+ REG_READ(pipeA ? DSPASIZE : DSPBSIZE),
+ REG_READ(pipeA ? DSPAPOS : DSPBPOS),
+ REG_READ(pipeA ? DSPABASE : DSPBBASE)
+ );
+
+ DRM_DEBUG(
+ "saved: (%x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x)\n",
+ crtc_state->saveDSPCNTR,
+ crtc_state->savePIPECONF,
+ crtc_state->savePIPESRC,
+ crtc_state->saveFP0,
+ crtc_state->saveFP1,
+ crtc_state->saveDPLL,
+ crtc_state->saveHTOTAL,
+ crtc_state->saveHBLANK,
+ crtc_state->saveHSYNC,
+ crtc_state->saveVTOTAL,
+ crtc_state->saveVBLANK,
+ crtc_state->saveVSYNC,
+ crtc_state->saveDSPSTRIDE,
+ crtc_state->saveDSPSIZE,
+ crtc_state->saveDSPPOS,
+ crtc_state->saveDSPBASE
+ );
+
+
+ if (crtc_state->saveDPLL & DPLL_VCO_ENABLE) {
+ REG_WRITE(pipeA ? DPLL_A : DPLL_B,
+ crtc_state->saveDPLL & ~DPLL_VCO_ENABLE);
+ REG_READ(pipeA ? DPLL_A : DPLL_B);
+ DRM_DEBUG("write dpll: %x\n",
+ REG_READ(pipeA ? DPLL_A : DPLL_B));
+ udelay(150);
+ }
+
+ REG_WRITE(pipeA ? FPA0 : FPB0, crtc_state->saveFP0);
+ REG_READ(pipeA ? FPA0 : FPB0);
+
+ REG_WRITE(pipeA ? FPA1 : FPB1, crtc_state->saveFP1);
+ REG_READ(pipeA ? FPA1 : FPB1);
+
+ REG_WRITE(pipeA ? DPLL_A : DPLL_B, crtc_state->saveDPLL);
+ REG_READ(pipeA ? DPLL_A : DPLL_B);
+ udelay(150);
+
+ REG_WRITE(pipeA ? HTOTAL_A : HTOTAL_B, crtc_state->saveHTOTAL);
+ REG_WRITE(pipeA ? HBLANK_A : HBLANK_B, crtc_state->saveHBLANK);
+ REG_WRITE(pipeA ? HSYNC_A : HSYNC_B, crtc_state->saveHSYNC);
+ REG_WRITE(pipeA ? VTOTAL_A : VTOTAL_B, crtc_state->saveVTOTAL);
+ REG_WRITE(pipeA ? VBLANK_A : VBLANK_B, crtc_state->saveVBLANK);
+ REG_WRITE(pipeA ? VSYNC_A : VSYNC_B, crtc_state->saveVSYNC);
+ REG_WRITE(pipeA ? DSPASTRIDE : DSPBSTRIDE, crtc_state->saveDSPSTRIDE);
+
+ REG_WRITE(pipeA ? DSPASIZE : DSPBSIZE, crtc_state->saveDSPSIZE);
+ REG_WRITE(pipeA ? DSPAPOS : DSPBPOS, crtc_state->saveDSPPOS);
+
+ REG_WRITE(pipeA ? PIPEASRC : PIPEBSRC, crtc_state->savePIPESRC);
+ REG_WRITE(pipeA ? DSPABASE : DSPBBASE, crtc_state->saveDSPBASE);
+ REG_WRITE(pipeA ? PIPEACONF : PIPEBCONF, crtc_state->savePIPECONF);
+
+ cdv_intel_wait_for_vblank(dev);
+
+ REG_WRITE(pipeA ? DSPACNTR : DSPBCNTR, crtc_state->saveDSPCNTR);
+ REG_WRITE(pipeA ? DSPABASE : DSPBBASE, crtc_state->saveDSPBASE);
+
+ cdv_intel_wait_for_vblank(dev);
+
+ paletteReg = pipeA ? PALETTE_A : PALETTE_B;
+ for (i = 0; i < 256; ++i)
+ REG_WRITE(paletteReg + (i << 2), crtc_state->savePalette[i]);
+}
+
+static int cdv_intel_crtc_cursor_set(struct drm_crtc *crtc,
+ struct drm_file *file_priv,
+ uint32_t handle,
+ uint32_t width, uint32_t height)
+{
+ struct drm_device *dev = crtc->dev;
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+ int pipe = psb_intel_crtc->pipe;
+ uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR;
+ uint32_t base = (pipe == 0) ? CURABASE : CURBBASE;
+ uint32_t temp;
+ size_t addr = 0;
+ struct gtt_range *gt;
+ struct drm_gem_object *obj;
+ int ret;
+
+ /* if we want to turn of the cursor ignore width and height */
+ if (!handle) {
+ /* turn off the cursor */
+ temp = CURSOR_MODE_DISABLE;
+
+ if (gma_power_begin(dev, false)) {
+ REG_WRITE(control, temp);
+ REG_WRITE(base, 0);
+ gma_power_end(dev);
+ }
+
+ /* unpin the old GEM object */
+ if (psb_intel_crtc->cursor_obj) {
+ gt = container_of(psb_intel_crtc->cursor_obj,
+ struct gtt_range, gem);
+ psb_gtt_unpin(gt);
+ drm_gem_object_unreference(psb_intel_crtc->cursor_obj);
+ psb_intel_crtc->cursor_obj = NULL;
+ }
+
+ return 0;
+ }
+
+ /* Currently we only support 64x64 cursors */
+ if (width != 64 || height != 64) {
+ dev_dbg(dev->dev, "we currently only support 64x64 cursors\n");
+ return -EINVAL;
+ }
+
+ obj = drm_gem_object_lookup(dev, file_priv, handle);
+ if (!obj)
+ return -ENOENT;
+
+ if (obj->size < width * height * 4) {
+ dev_dbg(dev->dev, "buffer is to small\n");
+ return -ENOMEM;
+ }
+
+ gt = container_of(obj, struct gtt_range, gem);
+
+ /* Pin the memory into the GTT */
+ ret = psb_gtt_pin(gt);
+ if (ret) {
+ dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle);
+ return ret;
+ }
+
+ addr = gt->offset; /* Or resource.start ??? */
+
+ psb_intel_crtc->cursor_addr = addr;
+
+ temp = 0;
+ /* set the pipe for the cursor */
+ temp |= (pipe << 28);
+ temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
+
+ if (gma_power_begin(dev, false)) {
+ REG_WRITE(control, temp);
+ REG_WRITE(base, addr);
+ gma_power_end(dev);
+ }
+
+ /* unpin the old GEM object */
+ if (psb_intel_crtc->cursor_obj) {
+ gt = container_of(psb_intel_crtc->cursor_obj,
+ struct gtt_range, gem);
+ psb_gtt_unpin(gt);
+ drm_gem_object_unreference(psb_intel_crtc->cursor_obj);
+ psb_intel_crtc->cursor_obj = obj;
+ }
+ return 0;
+}
+
+static int cdv_intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
+{
+ struct drm_device *dev = crtc->dev;
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+ int pipe = psb_intel_crtc->pipe;
+ uint32_t temp = 0;
+ uint32_t adder;
+
+
+ if (x < 0) {
+ temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT);
+ x = -x;
+ }
+ if (y < 0) {
+ temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT);
+ y = -y;
+ }
+
+ temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT);
+ temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT);
+
+ adder = psb_intel_crtc->cursor_addr;
+
+ if (gma_power_begin(dev, false)) {
+ REG_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp);
+ REG_WRITE((pipe == 0) ? CURABASE : CURBBASE, adder);
+ gma_power_end(dev);
+ }
+ return 0;
+}
+
+static void cdv_intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red,
+ u16 *green, u16 *blue, uint32_t start, uint32_t size)
+{
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+ int i;
+ int end = (start + size > 256) ? 256 : start + size;
+
+ for (i = start; i < end; i++) {
+ psb_intel_crtc->lut_r[i] = red[i] >> 8;
+ psb_intel_crtc->lut_g[i] = green[i] >> 8;
+ psb_intel_crtc->lut_b[i] = blue[i] >> 8;
+ }
+
+ cdv_intel_crtc_load_lut(crtc);
+}
+
+static int cdv_crtc_set_config(struct drm_mode_set *set)
+{
+ int ret = 0;
+ struct drm_device *dev = set->crtc->dev;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+
+ if (!dev_priv->rpm_enabled)
+ return drm_crtc_helper_set_config(set);
+
+ pm_runtime_forbid(&dev->pdev->dev);
+
+ ret = drm_crtc_helper_set_config(set);
+
+ pm_runtime_allow(&dev->pdev->dev);
+
+ return ret;
+}
+
+/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */
+
+/* FIXME: why are we using this, should it be cdv_ in this tree ? */
+
+static void i8xx_clock(int refclk, struct cdv_intel_clock_t *clock)
+{
+ clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
+ clock->p = clock->p1 * clock->p2;
+ clock->vco = refclk * clock->m / (clock->n + 2);
+ clock->dot = clock->vco / clock->p;
+}
+
+/* Returns the clock of the currently programmed mode of the given pipe. */
+static int cdv_intel_crtc_clock_get(struct drm_device *dev,
+ struct drm_crtc *crtc)
+{
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+ int pipe = psb_intel_crtc->pipe;
+ u32 dpll;
+ u32 fp;
+ struct cdv_intel_clock_t clock;
+ bool is_lvds;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+
+ if (gma_power_begin(dev, false)) {
+ dpll = REG_READ((pipe == 0) ? DPLL_A : DPLL_B);
+ if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
+ fp = REG_READ((pipe == 0) ? FPA0 : FPB0);
+ else
+ fp = REG_READ((pipe == 0) ? FPA1 : FPB1);
+ is_lvds = (pipe == 1) && (REG_READ(LVDS) & LVDS_PORT_EN);
+ gma_power_end(dev);
+ } else {
+ dpll = (pipe == 0) ?
+ dev_priv->saveDPLL_A : dev_priv->saveDPLL_B;
+
+ if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
+ fp = (pipe == 0) ?
+ dev_priv->saveFPA0 :
+ dev_priv->saveFPB0;
+ else
+ fp = (pipe == 0) ?
+ dev_priv->saveFPA1 :
+ dev_priv->saveFPB1;
+
+ is_lvds = (pipe == 1) && (dev_priv->saveLVDS & LVDS_PORT_EN);
+ }
+
+ clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
+ clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
+ clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
+
+ if (is_lvds) {
+ clock.p1 =
+ ffs((dpll &
+ DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
+ DPLL_FPA01_P1_POST_DIV_SHIFT);
+ if (clock.p1 == 0) {
+ clock.p1 = 4;
+ dev_err(dev->dev, "PLL %d\n", dpll);
+ }
+ clock.p2 = 14;
+
+ if ((dpll & PLL_REF_INPUT_MASK) ==
+ PLLB_REF_INPUT_SPREADSPECTRUMIN) {
+ /* XXX: might not be 66MHz */
+ i8xx_clock(66000, &clock);
+ } else
+ i8xx_clock(48000, &clock);
+ } else {
+ if (dpll & PLL_P1_DIVIDE_BY_TWO)
+ clock.p1 = 2;
+ else {
+ clock.p1 =
+ ((dpll &
+ DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
+ DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
+ }
+ if (dpll & PLL_P2_DIVIDE_BY_4)
+ clock.p2 = 4;
+ else
+ clock.p2 = 2;
+
+ i8xx_clock(48000, &clock);
+ }
+
+ /* XXX: It would be nice to validate the clocks, but we can't reuse
+ * i830PllIsValid() because it relies on the xf86_config connector
+ * configuration being accurate, which it isn't necessarily.
+ */
+
+ return clock.dot;
+}
+
+/** Returns the currently programmed mode of the given pipe. */
+struct drm_display_mode *cdv_intel_crtc_mode_get(struct drm_device *dev,
+ struct drm_crtc *crtc)
+{
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+ int pipe = psb_intel_crtc->pipe;
+ struct drm_display_mode *mode;
+ int htot;
+ int hsync;
+ int vtot;
+ int vsync;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+
+ if (gma_power_begin(dev, false)) {
+ htot = REG_READ((pipe == 0) ? HTOTAL_A : HTOTAL_B);
+ hsync = REG_READ((pipe == 0) ? HSYNC_A : HSYNC_B);
+ vtot = REG_READ((pipe == 0) ? VTOTAL_A : VTOTAL_B);
+ vsync = REG_READ((pipe == 0) ? VSYNC_A : VSYNC_B);
+ gma_power_end(dev);
+ } else {
+ htot = (pipe == 0) ?
+ dev_priv->saveHTOTAL_A : dev_priv->saveHTOTAL_B;
+ hsync = (pipe == 0) ?
+ dev_priv->saveHSYNC_A : dev_priv->saveHSYNC_B;
+ vtot = (pipe == 0) ?
+ dev_priv->saveVTOTAL_A : dev_priv->saveVTOTAL_B;
+ vsync = (pipe == 0) ?
+ dev_priv->saveVSYNC_A : dev_priv->saveVSYNC_B;
+ }
+
+ mode = kzalloc(sizeof(*mode), GFP_KERNEL);
+ if (!mode)
+ return NULL;
+
+ mode->clock = cdv_intel_crtc_clock_get(dev, crtc);
+ mode->hdisplay = (htot & 0xffff) + 1;
+ mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
+ mode->hsync_start = (hsync & 0xffff) + 1;
+ mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
+ mode->vdisplay = (vtot & 0xffff) + 1;
+ mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
+ mode->vsync_start = (vsync & 0xffff) + 1;
+ mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
+
+ drm_mode_set_name(mode);
+ drm_mode_set_crtcinfo(mode, 0);
+
+ return mode;
+}
+
+static void cdv_intel_crtc_destroy(struct drm_crtc *crtc)
+{
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+
+ kfree(psb_intel_crtc->crtc_state);
+ drm_crtc_cleanup(crtc);
+ kfree(psb_intel_crtc);
+}
+
+const struct drm_crtc_helper_funcs cdv_intel_helper_funcs = {
+ .dpms = cdv_intel_crtc_dpms,
+ .mode_fixup = cdv_intel_crtc_mode_fixup,
+ .mode_set = cdv_intel_crtc_mode_set,
+ .mode_set_base = cdv_intel_pipe_set_base,
+ .prepare = cdv_intel_crtc_prepare,
+ .commit = cdv_intel_crtc_commit,
+};
+
+const struct drm_crtc_funcs cdv_intel_crtc_funcs = {
+ .save = cdv_intel_crtc_save,
+ .restore = cdv_intel_crtc_restore,
+ .cursor_set = cdv_intel_crtc_cursor_set,
+ .cursor_move = cdv_intel_crtc_cursor_move,
+ .gamma_set = cdv_intel_crtc_gamma_set,
+ .set_config = cdv_crtc_set_config,
+ .destroy = cdv_intel_crtc_destroy,
+};
+
+/*
+ * Set the default value of cursor control and base register
+ * to zero. This is a workaround for h/w defect on oaktrail
+ */
+void cdv_intel_cursor_init(struct drm_device *dev, int pipe)
+{
+ uint32_t control;
+ uint32_t base;
+
+ switch (pipe) {
+ case 0:
+ control = CURACNTR;
+ base = CURABASE;
+ break;
+ case 1:
+ control = CURBCNTR;
+ base = CURBBASE;
+ break;
+ case 2:
+ control = CURCCNTR;
+ base = CURCBASE;
+ break;
+ default:
+ return;
+ }
+
+ REG_WRITE(control, 0);
+ REG_WRITE(base, 0);
+}
+