blob: 46fffa5b069733998cb59d80bf608e8a6503adfb [file] [log] [blame]
if ARCH_MX3
# ARCH_MX31 and ARCH_MX35 are left for compatibility
# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
# To easily distinguish good and reviewed from unreviewed usages new (and IMHO
# more sensible) names are used: SOC_IMX31 and SOC_IMX35
config ARCH_MX31
bool
config ARCH_MX35
bool
config SOC_IMX31
bool
select ARCH_HAS_RNGA
select ARCH_MXC_AUDMUX_V2
select ARCH_MX31
config SOC_IMX35
bool
select ARCH_MXC_IOMUX_V3
select ARCH_MXC_AUDMUX_V2
select HAVE_EPIT
select ARCH_MX35
comment "MX3 platforms:"
config MACH_MX31ADS
bool "Support MX31ADS platforms"
select SOC_IMX31
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
default y
help
Include support for MX31ADS platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX31ADS_WM1133_EV1
bool "Support Wolfson Microelectronics 1133-EV1 module"
depends on MACH_MX31ADS
depends on MFD_WM8350_I2C
depends on REGULATOR_WM8350
select MFD_WM8350_CONFIG_MODE_0
select MFD_WM8352_CONFIG_MODE_0
help
Include support for the Wolfson Microelectronics 1133-EV1 PMU
and audio module for the MX31ADS platform.
config MACH_PCM037
bool "Support Phytec pcm037 (i.MX31) platforms"
select SOC_IMX31
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_W1
select MXC_ULPI if USB_ULPI
help
Include support for Phytec pcm037 platform. This includes
specific configurations for the board and its peripherals.
config MACH_PCM037_EET
bool "Support pcm037 EET board extensions"
depends on MACH_PCM037
select IMX_HAVE_PLATFORM_SPI_IMX
help
Add support for PCM037 EET baseboard extensions. If you are using the
OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
command-line parameter.
config MACH_MX31LITE
bool "Support MX31 LITEKIT (LogicPD)"
select SOC_IMX31
select MXC_ULPI if USB_ULPI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SPI_IMX
help
Include support for MX31 LITEKIT platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX31_3DS
bool "Support MX31PDK (3DS)"
select SOC_IMX31
select MXC_DEBUG_BOARD
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SPI_IMX
help
Include support for MX31PDK (3DS) platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX31_3DS_MXC_NAND_USE_BBT
bool "Make the MXC NAND driver use the in flash Bad Block Table"
depends on MACH_MX31_3DS
depends on MTD_NAND_MXC
help
Enable this if you want that the MXC NAND driver uses the in flash
Bad Block Table to know what blocks are bad instead of scanning the
entire flash looking for bad block markers.
config MACH_MX31MOBOARD
bool "Support mx31moboard platforms (EPFL Mobots group)"
select SOC_IMX31
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
help
Include support for mx31moboard platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX31LILLY
bool "Support MX31 LILLY-1131 platforms (INCO startec)"
select SOC_IMX31
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
help
Include support for mx31 based LILLY1131 modules. This includes
specific configurations for the board and its peripherals.
config MACH_QONG
bool "Support Dave/DENX QongEVB-LITE platform"
select SOC_IMX31
select IMX_HAVE_PLATFORM_IMX_UART
help
Include support for Dave/DENX QongEVB-LITE platform. This includes
specific configurations for the board and its peripherals.
config MACH_PCM043
bool "Support Phytec pcm043 (i.MX35) platforms"
select SOC_IMX35
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_ESDHC
select MXC_ULPI if USB_ULPI
help
Include support for Phytec pcm043 platform. This includes
specific configurations for the board and its peripherals.
config MACH_ARMADILLO5X0
bool "Support Atmark Armadillo-500 Development Base Board"
select SOC_IMX31
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select MXC_ULPI if USB_ULPI
help
Include support for Atmark Armadillo-500 platform. This includes
specific configurations for the board and its peripherals.
config MACH_MX35_3DS
bool "Support MX35PDK platform"
select SOC_IMX35
select MXC_DEBUG_BOARD
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_ESDHC
default n
help
Include support for MX35PDK platform. This includes specific
configurations for the board and its peripherals.
config MACH_KZM_ARM11_01
bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
select SOC_IMX31
select IMX_HAVE_PLATFORM_IMX_UART
help
Include support for KZM-ARM11-01. This includes specific
configurations for the board and its peripherals.
config MACH_EUKREA_CPUIMX35
bool "Support Eukrea CPUIMX35 Platform"
select SOC_IMX35
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_ESDHC
select MXC_ULPI if USB_ULPI
help
Include support for Eukrea CPUIMX35 platform. This includes
specific configurations for the board and its peripherals.
choice
prompt "Baseboard"
depends on MACH_EUKREA_CPUIMX35
default MACH_EUKREA_MBIMXSD35_BASEBOARD
config MACH_EUKREA_MBIMXSD35_BASEBOARD
bool "Eukrea MBIMXSD development board"
select IMX_HAVE_PLATFORM_IMX_SSI
help
This adds board specific devices that can be found on Eukrea's
MBIMXSD evaluation board.
endchoice
endif