e1000: prevent oops when adapter is being closed and reset simultaneously
This change is based on a similar change made to e1000e support in
commit bb9e44d0d0f4 ("e1000e: prevent oops when adapter is being closed
and reset simultaneously"). The same issue has also been observed
on the older e1000 cards.
Here, we have increased the RESET_COUNT value to 50 because there are too
many accesses to e1000 nic on stress tests to e1000 nic, it is not enough
to set RESET_COUT 25. Experimentation has shown that it is enough to set
RESET_COUNT 50.
Signed-off-by: yzhu1 <yanjun.zhu@windriver.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/e1000/e1000.h b/drivers/net/ethernet/intel/e1000/e1000.h
index 58c1472..e4093d1 100644
--- a/drivers/net/ethernet/intel/e1000/e1000.h
+++ b/drivers/net/ethernet/intel/e1000/e1000.h
@@ -83,6 +83,11 @@
#define E1000_MAX_INTR 10
+/*
+ * Count for polling __E1000_RESET condition every 10-20msec.
+ */
+#define E1000_CHECK_RESET_COUNT 50
+
/* TX/RX descriptor defines */
#define E1000_DEFAULT_TXD 256
#define E1000_MAX_TXD 256
diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c
index e386228..c0f5217 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_main.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c
@@ -1440,6 +1440,10 @@
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
+ int count = E1000_CHECK_RESET_COUNT;
+
+ while (test_bit(__E1000_RESETTING, &adapter->flags) && count--)
+ usleep_range(10000, 20000);
WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
e1000_down(adapter);
@@ -4963,6 +4967,11 @@
netif_device_detach(netdev);
if (netif_running(netdev)) {
+ int count = E1000_CHECK_RESET_COUNT;
+
+ while (test_bit(__E1000_RESETTING, &adapter->flags) && count--)
+ usleep_range(10000, 20000);
+
WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
e1000_down(adapter);
}