drm/i915: Kill intel_prepare_ddi()
Move the ddi buffer translation programming to occur from the encoder
.pre_enable() hook, for just the ddi port we are enabling. Previously
we used to reprogram the translations for all ddi ports during
init and during power well enabling.
v2: s/intel_prepare_ddi_buffers/intel_prepare_ddi_buffer/ (Daniel)
Resolve conflicts due to dev_priv->atomic_cdclk_freq
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 9de993d..f17a2b0 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -1077,7 +1077,6 @@
*/
broxton_init_cdclk(dev);
broxton_ddi_phy_init(dev);
- intel_prepare_ddi(dev);
return 0;
}
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 3edb10a..2ed6472 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -342,12 +342,6 @@
return port;
}
-static bool
-intel_dig_port_supports_hdmi(const struct intel_digital_port *intel_dig_port)
-{
- return i915_mmio_reg_valid(intel_dig_port->hdmi.hdmi_reg);
-}
-
static const struct ddi_buf_trans *
skl_get_buf_trans_dp(struct drm_i915_private *dev_priv, int *n_entries)
{
@@ -401,28 +395,34 @@
* in either FDI or DP modes only, as HDMI connections will work with both
* of those
*/
-static void intel_prepare_ddi_buffers(struct drm_i915_private *dev_priv,
- enum port port, bool supports_hdmi)
+void intel_prepare_ddi_buffer(struct intel_encoder *encoder)
{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
u32 iboost_bit = 0;
int i, n_hdmi_entries, n_dp_entries, n_edp_entries, hdmi_default_entry,
size;
- int hdmi_level = dev_priv->vbt.ddi_port_info[port].hdmi_level_shift;
+ int hdmi_level;
+ enum port port;
const struct ddi_buf_trans *ddi_translations_fdi;
const struct ddi_buf_trans *ddi_translations_dp;
const struct ddi_buf_trans *ddi_translations_edp;
const struct ddi_buf_trans *ddi_translations_hdmi;
const struct ddi_buf_trans *ddi_translations;
+ port = intel_ddi_get_encoder_port(encoder);
+ hdmi_level = dev_priv->vbt.ddi_port_info[port].hdmi_level_shift;
+
if (IS_BROXTON(dev_priv)) {
- if (!supports_hdmi)
+ if (encoder->type != INTEL_OUTPUT_HDMI)
return;
/* Vswing programming for HDMI */
bxt_ddi_vswing_sequence(dev_priv, hdmi_level, port,
INTEL_OUTPUT_HDMI);
return;
- } else if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) {
+ }
+
+ if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) {
ddi_translations_fdi = NULL;
ddi_translations_dp =
skl_get_buf_trans_dp(dev_priv, &n_dp_entries);
@@ -468,30 +468,18 @@
hdmi_default_entry = 7;
}
- switch (port) {
- case PORT_A:
+ switch (encoder->type) {
+ case INTEL_OUTPUT_EDP:
ddi_translations = ddi_translations_edp;
size = n_edp_entries;
break;
- case PORT_B:
- case PORT_C:
+ case INTEL_OUTPUT_DISPLAYPORT:
+ case INTEL_OUTPUT_HDMI:
ddi_translations = ddi_translations_dp;
size = n_dp_entries;
break;
- case PORT_D:
- if (intel_dp_is_edp(dev_priv->dev, PORT_D)) {
- ddi_translations = ddi_translations_edp;
- size = n_edp_entries;
- } else {
- ddi_translations = ddi_translations_dp;
- size = n_dp_entries;
- }
- break;
- case PORT_E:
- if (ddi_translations_fdi)
- ddi_translations = ddi_translations_fdi;
- else
- ddi_translations = ddi_translations_dp;
+ case INTEL_OUTPUT_ANALOG:
+ ddi_translations = ddi_translations_fdi;
size = n_dp_entries;
break;
default:
@@ -505,7 +493,7 @@
ddi_translations[i].trans2);
}
- if (!supports_hdmi)
+ if (encoder->type != INTEL_OUTPUT_HDMI)
return;
/* Choose a good default if VBT is badly populated */
@@ -520,37 +508,6 @@
ddi_translations_hdmi[hdmi_level].trans2);
}
-/* Program DDI buffers translations for DP. By default, program ports A-D in DP
- * mode and port E for FDI.
- */
-void intel_prepare_ddi(struct drm_device *dev)
-{
- struct intel_encoder *intel_encoder;
- bool visited[I915_MAX_PORTS] = { 0, };
-
- if (!HAS_DDI(dev))
- return;
-
- for_each_intel_encoder(dev, intel_encoder) {
- struct intel_digital_port *intel_dig_port;
- enum port port;
- bool supports_hdmi;
-
- if (intel_encoder->type == INTEL_OUTPUT_DSI)
- continue;
-
- ddi_get_encoder_port(intel_encoder, &intel_dig_port, &port);
- if (visited[port])
- continue;
-
- supports_hdmi = intel_dig_port &&
- intel_dig_port_supports_hdmi(intel_dig_port);
-
- intel_prepare_ddi_buffers(to_i915(dev), port, supports_hdmi);
- visited[port] = true;
- }
-}
-
static void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv,
enum port port)
{
@@ -579,8 +536,14 @@
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_encoder *encoder;
u32 temp, i, rx_ctl_val;
+ for_each_encoder_on_crtc(dev, crtc, encoder) {
+ WARN_ON(encoder->type != INTEL_OUTPUT_ANALOG);
+ intel_prepare_ddi_buffer(encoder);
+ }
+
/* Set the FDI_RX_MISC pwrdn lanes and the 2 workarounds listed at the
* mode set "sequence for CRT port" document:
* - TP1 to TP2 time with the default value
@@ -2306,12 +2269,12 @@
static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder)
{
struct drm_encoder *encoder = &intel_encoder->base;
- struct drm_device *dev = encoder->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_i915_private *dev_priv = to_i915(encoder->dev);
struct intel_crtc *crtc = to_intel_crtc(encoder->crtc);
enum port port = intel_ddi_get_encoder_port(intel_encoder);
int type = intel_encoder->type;
- int hdmi_level;
+
+ intel_prepare_ddi_buffer(intel_encoder);
if (type == INTEL_OUTPUT_EDP) {
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
@@ -2329,17 +2292,11 @@
intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
intel_dp_start_link_train(intel_dp);
- if (port != PORT_A || INTEL_INFO(dev)->gen >= 9)
+ if (port != PORT_A || INTEL_INFO(dev_priv)->gen >= 9)
intel_dp_stop_link_train(intel_dp);
} else if (type == INTEL_OUTPUT_HDMI) {
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
- if (IS_BROXTON(dev)) {
- hdmi_level = dev_priv->vbt.
- ddi_port_info[port].hdmi_level_shift;
- bxt_ddi_vswing_sequence(dev_priv, hdmi_level, port,
- INTEL_OUTPUT_HDMI);
- }
intel_hdmi->set_infoframes(encoder,
crtc->config->has_hdmi_sink,
&crtc->config->base.adjusted_mode);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 259f2ca..20e99a0 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -9710,8 +9710,6 @@
val |= PCH_LP_PARTITION_LEVEL_DISABLE;
I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
}
-
- intel_prepare_ddi(dev);
}
static void broxton_modeset_commit_cdclk(struct drm_atomic_state *old_state)
@@ -15312,7 +15310,6 @@
dev_priv->atomic_cdclk_freq = dev_priv->cdclk_freq;
- intel_prepare_ddi(dev);
intel_init_clock_gating(dev);
intel_enable_gt_powersave(dev);
}
diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c b/drivers/gpu/drm/i915/intel_dp_mst.c
index 5cb168d..6f4762d 100644
--- a/drivers/gpu/drm/i915/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/intel_dp_mst.c
@@ -184,6 +184,8 @@
intel_mst->port = found->port;
if (intel_dp->active_mst_links == 0) {
+ intel_prepare_ddi_buffer(&intel_dig_port->base);
+
intel_ddi_clk_select(&intel_dig_port->base, intel_crtc->config);
intel_dp_set_link_params(intel_dp, intel_crtc->config);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 32de7e4..e27954d 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1025,7 +1025,7 @@
/* intel_ddi.c */
void intel_ddi_clk_select(struct intel_encoder *encoder,
const struct intel_crtc_state *pipe_config);
-void intel_prepare_ddi(struct drm_device *dev);
+void intel_prepare_ddi_buffer(struct intel_encoder *encoder);
void hsw_fdi_link_train(struct drm_crtc *crtc);
void intel_ddi_init(struct drm_device *dev, enum port port);
enum port intel_ddi_get_encoder_port(struct intel_encoder *intel_encoder);
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index 89a7dd8..bbca527 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -626,7 +626,6 @@
static void skl_set_power_well(struct drm_i915_private *dev_priv,
struct i915_power_well *power_well, bool enable)
{
- struct drm_device *dev = dev_priv->dev;
uint32_t tmp, fuse_status;
uint32_t req_mask, state_mask;
bool is_enabled, enable_requested, check_fuse_status = false;
@@ -670,17 +669,6 @@
!I915_READ(HSW_PWR_WELL_BIOS),
"Invalid for power well status to be enabled, unless done by the BIOS, \
when request is to disable!\n");
- if (power_well->data == SKL_DISP_PW_2) {
- /*
- * DDI buffer programming unnecessary during
- * driver-load/resume as it's already done
- * during modeset initialization then. It's
- * also invalid here as encoder list is still
- * uninitialized.
- */
- if (!dev_priv->power_domains.initializing)
- intel_prepare_ddi(dev);
- }
I915_WRITE(HSW_PWR_WELL_DRIVER, tmp | req_mask);
}