Merge 3.13-rc4 into tty-next
We want the fixes in here as well.
diff --git a/drivers/input/serio/serport.c b/drivers/input/serio/serport.c
index 8755f5f..0cb7ef5 100644
--- a/drivers/input/serio/serport.c
+++ b/drivers/input/serio/serport.c
@@ -124,7 +124,7 @@
{
struct serport *serport = (struct serport*) tty->disc_data;
unsigned long flags;
- unsigned int ch_flags;
+ unsigned int ch_flags = 0;
int i;
spin_lock_irqsave(&serport->lock, flags);
@@ -133,18 +133,20 @@
goto out;
for (i = 0; i < count; i++) {
- switch (fp[i]) {
- case TTY_FRAME:
- ch_flags = SERIO_FRAME;
- break;
+ if (fp) {
+ switch (fp[i]) {
+ case TTY_FRAME:
+ ch_flags = SERIO_FRAME;
+ break;
- case TTY_PARITY:
- ch_flags = SERIO_PARITY;
- break;
+ case TTY_PARITY:
+ ch_flags = SERIO_PARITY;
+ break;
- default:
- ch_flags = 0;
- break;
+ default:
+ ch_flags = 0;
+ break;
+ }
}
serio_interrupt(serport->serio, cp[i], ch_flags);
diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c
index 1b8bdb7..ff53314 100644
--- a/drivers/parport/parport_serial.c
+++ b/drivers/parport/parport_serial.c
@@ -596,13 +596,11 @@
err = pci_enable_device (dev);
if (err) {
- pci_set_drvdata (dev, NULL);
kfree (priv);
return err;
}
if (parport_register (dev, id)) {
- pci_set_drvdata (dev, NULL);
kfree (priv);
return -ENODEV;
}
@@ -611,7 +609,6 @@
int i;
for (i = 0; i < priv->num_par; i++)
parport_pc_unregister_port (priv->port[i]);
- pci_set_drvdata (dev, NULL);
kfree (priv);
return -ENODEV;
}
@@ -624,8 +621,6 @@
struct parport_serial_private *priv = pci_get_drvdata (dev);
int i;
- pci_set_drvdata(dev, NULL);
-
// Serial ports
if (priv->serial)
pciserial_remove_ports(priv->serial);
diff --git a/drivers/staging/fwserial/Kconfig b/drivers/staging/fwserial/Kconfig
index a0812d9..9c7c926 100644
--- a/drivers/staging/fwserial/Kconfig
+++ b/drivers/staging/fwserial/Kconfig
@@ -9,3 +9,23 @@
To compile this driver as a module, say M here: the module will
be called firewire-serial.
+
+if FIREWIRE_SERIAL
+
+config FWTTY_MAX_TOTAL_PORTS
+ int "Maximum number of serial ports supported"
+ default "64"
+ help
+ Set this to the maximum number of serial ports you want the
+ firewire-serial driver to support.
+
+config FWTTY_MAX_CARD_PORTS
+ int "Maximum number of serial ports supported per adapter"
+ range 0 FWTTY_MAX_TOTAL_PORTS
+ default "32"
+ help
+ Set this to the maximum number of serial ports each firewire
+ adapter supports. The actual number of serial ports registered
+ is set with the module parameter "ttys".
+
+endif
diff --git a/drivers/staging/fwserial/fwserial.c b/drivers/staging/fwserial/fwserial.c
index 62df009..8af136e 100644
--- a/drivers/staging/fwserial/fwserial.c
+++ b/drivers/staging/fwserial/fwserial.c
@@ -136,14 +136,14 @@
#ifdef FWTTY_PROFILING
-static void profile_fifo_avail(struct fwtty_port *port, unsigned *stat)
+static void fwtty_profile_fifo(struct fwtty_port *port, unsigned *stat)
{
spin_lock_bh(&port->lock);
- profile_size_distrib(stat, dma_fifo_avail(&port->tx_fifo));
+ fwtty_profile_data(stat, dma_fifo_avail(&port->tx_fifo));
spin_unlock_bh(&port->lock);
}
-static void dump_profile(struct seq_file *m, struct stats *stats)
+static void fwtty_dump_profile(struct seq_file *m, struct stats *stats)
{
/* for each stat, print sum of 0 to 2^k, then individually */
int k = 4;
@@ -183,8 +183,8 @@
}
#else
-#define profile_fifo_avail(port, stat)
-#define dump_profile(m, stats)
+#define fwtty_profile_fifo(port, stat)
+#define fwtty_dump_profile(m, stats)
#endif
/*
@@ -456,16 +456,27 @@
return err;
}
-static void __fwtty_throttle(struct fwtty_port *port, struct tty_struct *tty)
+static void fwtty_throttle_port(struct fwtty_port *port)
{
+ struct tty_struct *tty;
unsigned old;
+ tty = tty_port_tty_get(&port->port);
+ if (!tty)
+ return;
+
+ spin_lock_bh(&port->lock);
+
old = port->mctrl;
port->mctrl |= OOB_RX_THROTTLE;
if (C_CRTSCTS(tty))
port->mctrl &= ~TIOCM_RTS;
if (~old & OOB_RX_THROTTLE)
__fwtty_write_port_status(port);
+
+ spin_unlock_bh(&port->lock);
+
+ tty_kref_put(tty);
}
/**
@@ -532,80 +543,14 @@
port->icount.brk += brk;
}
-static void fwtty_pushrx(struct work_struct *work)
-{
- struct fwtty_port *port = to_port(work, push);
- struct tty_struct *tty;
- struct buffered_rx *buf, *next;
- int n, c = 0;
-
- spin_lock_bh(&port->lock);
- list_for_each_entry_safe(buf, next, &port->buf_list, list) {
- n = tty_insert_flip_string_fixed_flag(&port->port, buf->data,
- TTY_NORMAL, buf->n);
- c += n;
- port->buffered -= n;
- if (n < buf->n) {
- if (n > 0) {
- memmove(buf->data, buf->data + n, buf->n - n);
- buf->n -= n;
- }
- tty = tty_port_tty_get(&port->port);
- if (tty) {
- __fwtty_throttle(port, tty);
- tty_kref_put(tty);
- }
- break;
- } else {
- list_del(&buf->list);
- kfree(buf);
- }
- }
- if (c > 0)
- tty_flip_buffer_push(&port->port);
-
- if (list_empty(&port->buf_list))
- clear_bit(BUFFERING_RX, &port->flags);
- spin_unlock_bh(&port->lock);
-}
-
-static int fwtty_buffer_rx(struct fwtty_port *port, unsigned char *d, size_t n)
-{
- struct buffered_rx *buf;
- size_t size = (n + sizeof(struct buffered_rx) + 0xFF) & ~0xFF;
-
- if (port->buffered + n > HIGH_WATERMARK) {
- fwtty_err_ratelimited(port, "overflowed rx buffer: buffered: %d new: %zu wtrmk: %d\n",
- port->buffered, n, HIGH_WATERMARK);
- return 0;
- }
- buf = kmalloc(size, GFP_ATOMIC);
- if (!buf)
- return 0;
- INIT_LIST_HEAD(&buf->list);
- buf->n = n;
- memcpy(buf->data, d, n);
-
- spin_lock_bh(&port->lock);
- list_add_tail(&buf->list, &port->buf_list);
- port->buffered += n;
- if (port->buffered > port->stats.watermark)
- port->stats.watermark = port->buffered;
- set_bit(BUFFERING_RX, &port->flags);
- spin_unlock_bh(&port->lock);
-
- return n;
-}
-
static int fwtty_rx(struct fwtty_port *port, unsigned char *data, size_t len)
{
- struct tty_struct *tty;
int c, n = len;
unsigned lsr;
int err = 0;
fwtty_dbg(port, "%d\n", n);
- profile_size_distrib(port->stats.reads, n);
+ fwtty_profile_data(port->stats.reads, n);
if (port->write_only) {
n = 0;
@@ -636,31 +581,24 @@
goto out;
}
- if (!test_bit(BUFFERING_RX, &port->flags)) {
- c = tty_insert_flip_string_fixed_flag(&port->port, data,
- TTY_NORMAL, n);
- if (c > 0)
- tty_flip_buffer_push(&port->port);
- n -= c;
-
- if (n) {
- /* start buffering and throttling */
- n -= fwtty_buffer_rx(port, &data[c], n);
-
- tty = tty_port_tty_get(&port->port);
- if (tty) {
- spin_lock_bh(&port->lock);
- __fwtty_throttle(port, tty);
- spin_unlock_bh(&port->lock);
- tty_kref_put(tty);
- }
- }
- } else
- n -= fwtty_buffer_rx(port, data, n);
+ c = tty_insert_flip_string_fixed_flag(&port->port, data, TTY_NORMAL, n);
+ if (c > 0)
+ tty_flip_buffer_push(&port->port);
+ n -= c;
if (n) {
port->overrun = true;
err = -EIO;
+ fwtty_err_ratelimited(port, "flip buffer overrun\n");
+
+ } else {
+ /* throttle the sender if remaining flip buffer space has
+ * reached high watermark to avoid losing data which may be
+ * in-flight. Since the AR request context is 32k, that much
+ * data may have _already_ been acked.
+ */
+ if (tty_buffer_space_avail(&port->port) < HIGH_WATERMARK)
+ fwtty_throttle_port(port);
}
out:
@@ -821,7 +759,7 @@
if (n == -EAGAIN)
++port->stats.tx_stall;
else if (n == -ENODATA)
- profile_size_distrib(port->stats.txns, 0);
+ fwtty_profile_data(port->stats.txns, 0);
else {
++port->stats.fifo_errs;
fwtty_err_ratelimited(port, "fifo err: %d\n",
@@ -830,7 +768,7 @@
break;
}
- profile_size_distrib(port->stats.txns, txn->dma_pended.len);
+ fwtty_profile_data(port->stats.txns, txn->dma_pended.len);
fwtty_send_txn_async(peer, txn, TCODE_WRITE_BLOCK_REQUEST,
peer->fifo_addr, txn->dma_pended.data,
@@ -1101,20 +1039,13 @@
static void fwtty_port_shutdown(struct tty_port *tty_port)
{
struct fwtty_port *port = to_port(tty_port, port);
- struct buffered_rx *buf, *next;
/* TODO: cancel outstanding transactions */
cancel_delayed_work_sync(&port->emit_breaks);
cancel_delayed_work_sync(&port->drain);
- cancel_work_sync(&port->push);
spin_lock_bh(&port->lock);
- list_for_each_entry_safe(buf, next, &port->buf_list, list) {
- list_del(&buf->list);
- kfree(buf);
- }
- port->buffered = 0;
port->flags = 0;
port->break_ctl = 0;
port->overrun = 0;
@@ -1184,7 +1115,7 @@
int n, len;
fwtty_dbg(port, "%d\n", c);
- profile_size_distrib(port->stats.writes, c);
+ fwtty_profile_data(port->stats.writes, c);
spin_lock_bh(&port->lock);
n = dma_fifo_in(&port->tx_fifo, buf, c);
@@ -1262,9 +1193,7 @@
fwtty_dbg(port, "CRTSCTS: %d\n", (C_CRTSCTS(tty) != 0));
- profile_fifo_avail(port, port->stats.unthrottle);
-
- schedule_work(&port->push);
+ fwtty_profile_fifo(port, port->stats.unthrottle);
spin_lock_bh(&port->lock);
port->mctrl &= ~OOB_RX_THROTTLE;
@@ -1523,15 +1452,14 @@
seq_printf(m, " dr:%d st:%d err:%d lost:%d", stats.dropped,
stats.tx_stall, stats.fifo_errs, stats.lost);
- seq_printf(m, " pkts:%d thr:%d wtrmk:%d", stats.sent, stats.throttled,
- stats.watermark);
+ seq_printf(m, " pkts:%d thr:%d", stats.sent, stats.throttled);
if (port->port.console) {
seq_puts(m, "\n ");
(*port->fwcon_ops->proc_show)(m, port->con_data);
}
- dump_profile(m, &port->stats);
+ fwtty_dump_profile(m, &port->stats);
}
static void fwtty_debugfs_show_peer(struct seq_file *m, struct fwtty_peer *peer)
@@ -2297,13 +2225,12 @@
port->index = FWTTY_INVALID_INDEX;
port->port.ops = &fwtty_port_ops;
port->serial = serial;
+ tty_buffer_set_limit(&port->port, 128 * 1024);
spin_lock_init(&port->lock);
INIT_DELAYED_WORK(&port->drain, fwtty_drain_tx);
INIT_DELAYED_WORK(&port->emit_breaks, fwtty_emit_breaks);
INIT_WORK(&port->hangup, fwtty_do_hangup);
- INIT_WORK(&port->push, fwtty_pushrx);
- INIT_LIST_HEAD(&port->buf_list);
init_waitqueue_head(&port->wait_tx);
port->max_payload = link_speed_to_max_payload(SCODE_100);
dma_fifo_init(&port->tx_fifo);
diff --git a/drivers/staging/fwserial/fwserial.h b/drivers/staging/fwserial/fwserial.h
index 2463501..54f7f9b 100644
--- a/drivers/staging/fwserial/fwserial.h
+++ b/drivers/staging/fwserial/fwserial.h
@@ -22,14 +22,14 @@
#ifdef FWTTY_PROFILING
#define DISTRIBUTION_MAX_SIZE 8192
#define DISTRIBUTION_MAX_INDEX (ilog2(DISTRIBUTION_MAX_SIZE) + 1)
-static inline void profile_size_distrib(unsigned stat[], unsigned val)
+static inline void fwtty_profile_data(unsigned stat[], unsigned val)
{
int n = (val) ? min(ilog2(val) + 1, DISTRIBUTION_MAX_INDEX) : 0;
++stat[n];
}
#else
#define DISTRIBUTION_MAX_INDEX 0
-#define profile_size_distrib(st, n)
+#define fwtty_profile_data(st, n)
#endif
/* Parameters for both VIRT_CABLE_PLUG & VIRT_CABLE_PLUG_RSP mgmt codes */
@@ -166,7 +166,6 @@
unsigned sent;
unsigned lost;
unsigned throttled;
- unsigned watermark;
unsigned reads[DISTRIBUTION_MAX_INDEX + 1];
unsigned writes[DISTRIBUTION_MAX_INDEX + 1];
unsigned txns[DISTRIBUTION_MAX_INDEX + 1];
@@ -183,12 +182,6 @@
#define FWCON_NOTIFY_ATTACH 1
#define FWCON_NOTIFY_DETACH 2
-struct buffered_rx {
- struct list_head list;
- size_t n;
- unsigned char data[0];
-};
-
/**
* fwtty_port: structure used to track/represent underlying tty_port
* @port: underlying tty_port
@@ -223,11 +216,6 @@
* The work can race with the writer but concurrent sending is
* prevented with the IN_TX flag. Scheduled under lock to
* limit scheduling when fifo has just been drained.
- * @push: work responsible for pushing buffered rx to the ldisc.
- * rx can become buffered if the tty buffer is filled before the
- * ldisc throttles the sender.
- * @buf_list: list of buffered rx yet to be sent to ldisc
- * @buffered: byte count of buffered rx
* @tx_fifo: fifo used to store & block-up writes for dma to remote
* @max_payload: max bytes transmissable per dma (based on peer's max_payload)
* @status_mask: UART_LSR_* bitmask significant to rx (based on termios)
@@ -267,9 +255,6 @@
spinlock_t lock;
unsigned mctrl;
struct delayed_work drain;
- struct work_struct push;
- struct list_head buf_list;
- int buffered;
struct dma_fifo tx_fifo;
int max_payload;
unsigned status_mask;
@@ -291,7 +276,6 @@
/* bit #s for flags field */
#define IN_TX 0
#define STOP_TX 1
-#define BUFFERING_RX 2
/* bitmasks for special mctrl/mstatus bits */
#define OOB_RX_THROTTLE 0x00010000
@@ -307,8 +291,8 @@
#define FREQ_BREAKS (HZ / 50)
/* Ports are allocated in blocks of num_ports for each fw_card */
-#define MAX_CARD_PORTS 32 /* max # of ports per card */
-#define MAX_TOTAL_PORTS 64 /* max # of ports total */
+#define MAX_CARD_PORTS CONFIG_FWTTY_MAX_CARD_PORTS
+#define MAX_TOTAL_PORTS CONFIG_FWTTY_MAX_TOTAL_PORTS
/* tuning parameters */
#define FWTTY_PORT_TXFIFO_LEN 4096
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index c0f76da..679294b 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -194,6 +194,7 @@
struct gsm_mux {
struct tty_struct *tty; /* The tty our ldisc is bound to */
spinlock_t lock;
+ struct mutex mutex;
unsigned int num;
struct kref ref;
@@ -2054,9 +2055,11 @@
dlci->state == DLCI_CLOSED);
}
/* Free up any link layer users */
+ mutex_lock(&gsm->mutex);
for (i = 0; i < NUM_DLCI; i++)
if (gsm->dlci[i])
gsm_dlci_release(gsm->dlci[i]);
+ mutex_unlock(&gsm->mutex);
/* Now wipe the queues */
list_for_each_entry_safe(txq, ntxq, &gsm->tx_list, list)
kfree(txq);
@@ -2170,6 +2173,7 @@
return NULL;
}
spin_lock_init(&gsm->lock);
+ mutex_init(&gsm->mutex);
kref_init(&gsm->ref);
INIT_LIST_HEAD(&gsm->tx_list);
@@ -2269,14 +2273,15 @@
char *f;
int i;
char buf[64];
- char flags;
+ char flags = TTY_NORMAL;
if (debug & 4)
print_hex_dump_bytes("gsmld_receive: ", DUMP_PREFIX_OFFSET,
cp, count);
for (i = count, dp = cp, f = fp; i; i--, dp++) {
- flags = *f++;
+ if (f)
+ flags = *f++;
switch (flags) {
case TTY_NORMAL:
gsm->receive(gsm, *dp);
@@ -2909,23 +2914,33 @@
This is ok from a locking
perspective as we don't have to worry about this
if DLCI0 is lost */
- if (gsm->dlci[0] && gsm->dlci[0]->state != DLCI_OPEN)
+ mutex_lock(&gsm->mutex);
+ if (gsm->dlci[0] && gsm->dlci[0]->state != DLCI_OPEN) {
+ mutex_unlock(&gsm->mutex);
return -EL2NSYNC;
+ }
dlci = gsm->dlci[line];
if (dlci == NULL) {
alloc = true;
dlci = gsm_dlci_alloc(gsm, line);
}
- if (dlci == NULL)
+ if (dlci == NULL) {
+ mutex_unlock(&gsm->mutex);
return -ENOMEM;
+ }
ret = tty_port_install(&dlci->port, driver, tty);
if (ret) {
if (alloc)
dlci_put(dlci);
+ mutex_unlock(&gsm->mutex);
return ret;
}
+ dlci_get(dlci);
+ dlci_get(gsm->dlci[0]);
+ mux_get(gsm);
tty->driver_data = dlci;
+ mutex_unlock(&gsm->mutex);
return 0;
}
@@ -2936,9 +2951,6 @@
struct tty_port *port = &dlci->port;
port->count++;
- dlci_get(dlci);
- dlci_get(dlci->gsm->dlci[0]);
- mux_get(dlci->gsm);
tty_port_tty_set(port, tty);
dlci->modem_rx = 0;
@@ -2965,7 +2977,7 @@
mutex_unlock(&dlci->mutex);
gsm = dlci->gsm;
if (tty_port_close_start(&dlci->port, tty, filp) == 0)
- goto out;
+ return;
gsm_dlci_begin_close(dlci);
if (test_bit(ASYNCB_INITIALIZED, &dlci->port.flags)) {
if (C_HUPCL(tty))
@@ -2973,10 +2985,7 @@
}
tty_port_close_end(&dlci->port, tty);
tty_port_tty_set(&dlci->port, NULL);
-out:
- dlci_put(dlci);
- dlci_put(gsm->dlci[0]);
- mux_put(gsm);
+ return;
}
static void gsmtty_hangup(struct tty_struct *tty)
@@ -3153,6 +3162,16 @@
return gsmtty_modem_update(dlci, encode);
}
+static void gsmtty_remove(struct tty_driver *driver, struct tty_struct *tty)
+{
+ struct gsm_dlci *dlci = tty->driver_data;
+ struct gsm_mux *gsm = dlci->gsm;
+
+ dlci_put(dlci);
+ dlci_put(gsm->dlci[0]);
+ mux_put(gsm);
+ driver->ttys[tty->index] = NULL;
+}
/* Virtual ttys for the demux */
static const struct tty_operations gsmtty_ops = {
@@ -3172,6 +3191,7 @@
.tiocmget = gsmtty_tiocmget,
.tiocmset = gsmtty_tiocmset,
.break_ctl = gsmtty_break_ctl,
+ .remove = gsmtty_remove,
};
diff --git a/drivers/tty/n_r3964.c b/drivers/tty/n_r3964.c
index 1e64050..8b157d6 100644
--- a/drivers/tty/n_r3964.c
+++ b/drivers/tty/n_r3964.c
@@ -1244,7 +1244,7 @@
{
struct r3964_info *pInfo = tty->disc_data;
const unsigned char *p;
- char *f, flags = 0;
+ char *f, flags = TTY_NORMAL;
int i;
for (i = count, p = cp, f = fp; i; i--, p++) {
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 268b627..fdc2ecd 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -274,7 +274,8 @@
return;
n_tty_set_room(tty);
n_tty_write_wakeup(tty->link);
- wake_up_interruptible_poll(&tty->link->write_wait, POLLOUT);
+ if (waitqueue_active(&tty->link->write_wait))
+ wake_up_interruptible_poll(&tty->link->write_wait, POLLOUT);
return;
}
@@ -349,7 +350,8 @@
spin_lock_irqsave(&tty->ctrl_lock, flags);
if (tty->link->packet) {
tty->ctrl_status |= TIOCPKT_FLUSHREAD;
- wake_up_interruptible(&tty->link->read_wait);
+ if (waitqueue_active(&tty->link->read_wait))
+ wake_up_interruptible(&tty->link->read_wait);
}
spin_unlock_irqrestore(&tty->ctrl_lock, flags);
}
@@ -1157,7 +1159,8 @@
put_tty_queue('\0', ldata);
}
put_tty_queue('\0', ldata);
- wake_up_interruptible(&tty->read_wait);
+ if (waitqueue_active(&tty->read_wait))
+ wake_up_interruptible(&tty->read_wait);
}
/**
@@ -1215,7 +1218,8 @@
put_tty_queue('\0', ldata);
else
put_tty_queue(c, ldata);
- wake_up_interruptible(&tty->read_wait);
+ if (waitqueue_active(&tty->read_wait))
+ wake_up_interruptible(&tty->read_wait);
}
static void
@@ -1259,7 +1263,6 @@
n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
{
struct n_tty_data *ldata = tty->disc_data;
- int parmrk;
if (I_IXON(tty)) {
if (c == START_CHAR(tty)) {
@@ -1344,8 +1347,6 @@
}
if ((c == EOL_CHAR(tty)) ||
(c == EOL2_CHAR(tty) && L_IEXTEN(tty))) {
- parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty))
- ? 1 : 0;
/*
* XXX are EOL_CHAR and EOL2_CHAR echoed?!?
*/
@@ -1360,7 +1361,7 @@
* XXX does PARMRK doubling happen for
* EOL_CHAR and EOL2_CHAR?
*/
- if (parmrk)
+ if (c == (unsigned char) '\377' && I_PARMRK(tty))
put_tty_queue(c, ldata);
handle_newline:
@@ -1374,7 +1375,6 @@
}
}
- parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
if (L_ECHO(tty)) {
finish_erasing(ldata);
if (c == '\n')
@@ -1388,7 +1388,8 @@
commit_echoes(tty);
}
- if (parmrk)
+ /* PARMRK doubling check */
+ if (c == (unsigned char) '\377' && I_PARMRK(tty))
put_tty_queue(c, ldata);
put_tty_queue(c, ldata);
@@ -1399,7 +1400,6 @@
n_tty_receive_char_inline(struct tty_struct *tty, unsigned char c)
{
struct n_tty_data *ldata = tty->disc_data;
- int parmrk;
if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && I_IXANY(tty)) {
start_tty(tty);
@@ -1413,13 +1413,13 @@
echo_char(c, tty);
commit_echoes(tty);
}
- parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
- if (parmrk)
+ /* PARMRK doubling check */
+ if (c == (unsigned char) '\377' && I_PARMRK(tty))
put_tty_queue(c, ldata);
put_tty_queue(c, ldata);
}
-static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
+static void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
{
n_tty_receive_char_inline(tty, c);
}
@@ -1444,8 +1444,7 @@
put_tty_queue(c, ldata);
}
-static inline void
-n_tty_receive_char_closing(struct tty_struct *tty, unsigned char c)
+static void n_tty_receive_char_closing(struct tty_struct *tty, unsigned char c)
{
if (I_ISTRIP(tty))
c &= 0x7f;
@@ -1676,32 +1675,9 @@
}
}
-static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
- char *fp, int count)
-{
- int room, n;
-
- down_read(&tty->termios_rwsem);
-
- while (1) {
- room = receive_room(tty);
- n = min(count, room);
- if (!n)
- break;
- __receive_buf(tty, cp, fp, n);
- cp += n;
- if (fp)
- fp += n;
- count -= n;
- }
-
- tty->receive_room = room;
- n_tty_check_throttle(tty);
- up_read(&tty->termios_rwsem);
-}
-
-static int n_tty_receive_buf2(struct tty_struct *tty, const unsigned char *cp,
- char *fp, int count)
+static int
+n_tty_receive_buf_common(struct tty_struct *tty, const unsigned char *cp,
+ char *fp, int count, int flow)
{
struct n_tty_data *ldata = tty->disc_data;
int room, n, rcvd = 0;
@@ -1712,7 +1688,7 @@
room = receive_room(tty);
n = min(count, room);
if (!n) {
- if (!room)
+ if (flow && !room)
ldata->no_room = 1;
break;
}
@@ -1731,6 +1707,18 @@
return rcvd;
}
+static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
+ char *fp, int count)
+{
+ n_tty_receive_buf_common(tty, cp, fp, count, 0);
+}
+
+static int n_tty_receive_buf2(struct tty_struct *tty, const unsigned char *cp,
+ char *fp, int count)
+{
+ return n_tty_receive_buf_common(tty, cp, fp, count, 1);
+}
+
int is_ignored(int sig)
{
return (sigismember(¤t->blocked, sig) ||
@@ -1820,8 +1808,10 @@
start_tty(tty);
/* The termios change make the tty ready for I/O */
- wake_up_interruptible(&tty->write_wait);
- wake_up_interruptible(&tty->read_wait);
+ if (waitqueue_active(&tty->write_wait))
+ wake_up_interruptible(&tty->write_wait);
+ if (waitqueue_active(&tty->read_wait))
+ wake_up_interruptible(&tty->read_wait);
}
/**
@@ -1887,14 +1877,15 @@
return -ENOMEM;
}
-static inline int input_available_p(struct tty_struct *tty, int amt)
+static inline int input_available_p(struct tty_struct *tty, int poll)
{
struct n_tty_data *ldata = tty->disc_data;
+ int amt = poll && !TIME_CHAR(tty) ? MIN_CHAR(tty) : 1;
if (ldata->icanon && !L_EXTPROC(tty)) {
if (ldata->canon_head != ldata->read_tail)
return 1;
- } else if (read_cnt(ldata) >= (amt ? amt : 1))
+ } else if (read_cnt(ldata) >= amt)
return 1;
return 0;
@@ -2393,7 +2384,7 @@
poll_wait(file, &tty->read_wait, wait);
poll_wait(file, &tty->write_wait, wait);
- if (input_available_p(tty, TIME_CHAR(tty) ? 0 : MIN_CHAR(tty)))
+ if (input_available_p(tty, 1))
mask |= POLLIN | POLLRDNORM;
if (tty->packet && tty->link->ctrl_status)
mask |= POLLPRI | POLLIN | POLLRDNORM;
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index 354564e..383c4c7 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -1744,7 +1744,7 @@
#ifdef CONFIG_PCI
-static DEFINE_PCI_DEVICE_TABLE(rocket_pci_ids) = {
+static const struct pci_device_id rocket_pci_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP4QUAD) },
{ PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP8OCTA) },
{ PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_URP8OCTA) },
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 4658e3e..816ec88 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -272,7 +272,6 @@
return 0;
}
-#ifdef CONFIG_ACPI
static int dw8250_probe_acpi(struct uart_8250_port *up,
struct dw8250_data *data)
{
@@ -300,13 +299,6 @@
return 0;
}
-#else
-static inline int dw8250_probe_acpi(struct uart_8250_port *up,
- struct dw8250_data *data)
-{
- return -ENODEV;
-}
-#endif /* CONFIG_ACPI */
static int dw8250_probe(struct platform_device *pdev)
{
diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c
index 33bd860..01c9e72 100644
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -756,9 +756,10 @@
return 0;
}
-static int pl010_suspend(struct amba_device *dev, pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int pl010_suspend(struct device *dev)
{
- struct uart_amba_port *uap = amba_get_drvdata(dev);
+ struct uart_amba_port *uap = dev_get_drvdata(dev);
if (uap)
uart_suspend_port(&amba_reg, &uap->port);
@@ -766,15 +767,18 @@
return 0;
}
-static int pl010_resume(struct amba_device *dev)
+static int pl010_resume(struct device *dev)
{
- struct uart_amba_port *uap = amba_get_drvdata(dev);
+ struct uart_amba_port *uap = dev_get_drvdata(dev);
if (uap)
uart_resume_port(&amba_reg, &uap->port);
return 0;
}
+#endif
+
+static SIMPLE_DEV_PM_OPS(pl010_dev_pm_ops, pl010_suspend, pl010_resume);
static struct amba_id pl010_ids[] = {
{
@@ -789,12 +793,11 @@
static struct amba_driver pl010_driver = {
.drv = {
.name = "uart-pl010",
+ .pm = &pl010_dev_pm_ops,
},
.id_table = pl010_ids,
.probe = pl010_probe,
.remove = pl010_remove,
- .suspend = pl010_suspend,
- .resume = pl010_resume,
};
static int __init pl010_init(void)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 7203864..c8cc8f0 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -112,8 +112,6 @@
.get_fifosize = get_fifosize_st,
};
-static struct uart_amba_port *amba_ports[UART_NR];
-
/* Deals with DMA transactions */
struct pl011_sgbuf {
@@ -327,7 +325,7 @@
dmaengine_slave_config(chan, &rx_conf);
uap->dmarx.chan = chan;
- if (plat && plat->dma_rx_poll_enable) {
+ if (plat) {
/* Set poll rate if specified. */
if (plat->dma_rx_poll_rate) {
uap->dmarx.auto_poll_rate = false;
@@ -2169,10 +2167,10 @@
return 0;
}
-#ifdef CONFIG_PM
-static int pl011_suspend(struct amba_device *dev, pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int pl011_suspend(struct device *dev)
{
- struct uart_amba_port *uap = amba_get_drvdata(dev);
+ struct uart_amba_port *uap = dev_get_drvdata(dev);
if (!uap)
return -EINVAL;
@@ -2180,9 +2178,9 @@
return uart_suspend_port(&amba_reg, &uap->port);
}
-static int pl011_resume(struct amba_device *dev)
+static int pl011_resume(struct device *dev)
{
- struct uart_amba_port *uap = amba_get_drvdata(dev);
+ struct uart_amba_port *uap = dev_get_drvdata(dev);
if (!uap)
return -EINVAL;
@@ -2191,6 +2189,8 @@
}
#endif
+static SIMPLE_DEV_PM_OPS(pl011_dev_pm_ops, pl011_suspend, pl011_resume);
+
static struct amba_id pl011_ids[] = {
{
.id = 0x00041011,
@@ -2210,14 +2210,11 @@
static struct amba_driver pl011_driver = {
.drv = {
.name = "uart-pl011",
+ .pm = &pl011_dev_pm_ops,
},
.id_table = pl011_ids,
.probe = pl011_probe,
.remove = pl011_remove,
-#ifdef CONFIG_PM
- .suspend = pl011_suspend,
- .resume = pl011_resume,
-#endif
};
static int __init pl011_init(void)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index b2cfdb6..d799140 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -806,6 +806,9 @@
if (readl(sport->port.membase + UCR2) & UCR2_CTS)
tmp |= TIOCM_RTS;
+ if (readl(sport->port.membase + uts_reg(sport)) & UTS_LOOP)
+ tmp |= TIOCM_LOOP;
+
return tmp;
}
@@ -821,6 +824,11 @@
temp |= UCR2_CTS;
writel(temp, sport->port.membase + UCR2);
+
+ temp = readl(sport->port.membase + uts_reg(sport)) & ~UTS_LOOP;
+ if (mctrl & TIOCM_LOOP)
+ temp |= UTS_LOOP;
+ writel(temp, sport->port.membase + uts_reg(sport));
}
/*
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index d8b6fee..aa97fd8 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -734,9 +734,12 @@
static int mxs_auart_startup(struct uart_port *u)
{
+ int ret;
struct mxs_auart_port *s = to_auart_port(u);
- clk_prepare_enable(s->clk);
+ ret = clk_prepare_enable(s->clk);
+ if (ret)
+ return ret;
writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_CLR);
@@ -957,7 +960,9 @@
if (!s)
return -ENODEV;
- clk_prepare_enable(s->clk);
+ ret = clk_prepare_enable(s->clk);
+ if (ret)
+ return ret;
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 0aa2b52..9cbd3ac 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -1853,7 +1853,6 @@
debugfs_remove(priv->debugfs);
#endif
uart_remove_one_port(&pch_uart_driver, &priv->port);
- pci_set_drvdata(priv->pdev, NULL);
free_page((unsigned long)priv->rxbuf.buf);
}
@@ -1907,7 +1906,7 @@
#define pch_uart_pci_resume NULL
#endif
-static DEFINE_PCI_DEVICE_TABLE(pch_uart_pci_id) = {
+static const struct pci_device_id pch_uart_pci_id[] = {
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8811),
.driver_data = pch_et20t_uart0},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8812),
diff --git a/drivers/tty/serial/rp2.c b/drivers/tty/serial/rp2.c
index 328d6de..056f91b 100644
--- a/drivers/tty/serial/rp2.c
+++ b/drivers/tty/serial/rp2.c
@@ -810,7 +810,7 @@
rp2_remove_ports(card);
}
-static DEFINE_PCI_DEVICE_TABLE(rp2_pci_tbl) = {
+static const struct pci_device_id rp2_pci_tbl[] = {
/* RocketPort INFINITY cards */
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 0f02351..ece2049 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -1830,9 +1830,13 @@
/*
* Ensure that the serial console lock is initialised
* early.
+ * If this port is a console, then the spinlock is already
+ * initialised.
*/
- spin_lock_init(&port->lock);
- lockdep_set_class(&port->lock, &port_lock_key);
+ if (!(uart_console(port) && (port->cons->flags & CON_ENABLED))) {
+ spin_lock_init(&port->lock);
+ lockdep_set_class(&port->lock, &port_lock_key);
+ }
memset(&termios, 0, sizeof(struct ktermios));
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index c043136f..3002e20 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -26,7 +26,7 @@
* Byte threshold to limit memory consumption for flip buffers.
* The actual memory limit is > 2x this amount.
*/
-#define TTYB_MEM_LIMIT 65536
+#define TTYB_DEFAULT_MEM_LIMIT 65536
/*
* We default to dicing tty buffer allocations to this many characters
@@ -89,9 +89,10 @@
int tty_buffer_space_avail(struct tty_port *port)
{
- int space = TTYB_MEM_LIMIT - atomic_read(&port->buf.memory_used);
+ int space = port->buf.mem_limit - atomic_read(&port->buf.mem_used);
return max(space, 0);
}
+EXPORT_SYMBOL_GPL(tty_buffer_space_avail);
static void tty_buffer_reset(struct tty_buffer *p, size_t size)
{
@@ -100,6 +101,7 @@
p->next = NULL;
p->commit = 0;
p->read = 0;
+ p->flags = 0;
}
/**
@@ -129,7 +131,7 @@
buf->head = &buf->sentinel;
buf->tail = &buf->sentinel;
- atomic_set(&buf->memory_used, 0);
+ atomic_set(&buf->mem_used, 0);
}
/**
@@ -162,7 +164,7 @@
/* Should possibly check if this fails for the largest buffer we
have queued and recycle that ? */
- if (atomic_read(&port->buf.memory_used) > TTYB_MEM_LIMIT)
+ if (atomic_read(&port->buf.mem_used) > port->buf.mem_limit)
return NULL;
p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC);
if (p == NULL)
@@ -170,7 +172,7 @@
found:
tty_buffer_reset(p, size);
- atomic_add(size, &port->buf.memory_used);
+ atomic_add(size, &port->buf.mem_used);
return p;
}
@@ -188,7 +190,7 @@
struct tty_bufhead *buf = &port->buf;
/* Dumb strategy for now - should keep some stats */
- WARN_ON(atomic_sub_return(b->size, &buf->memory_used) < 0);
+ WARN_ON(atomic_sub_return(b->size, &buf->mem_used) < 0);
if (b->size > MIN_TTYB_SIZE)
kfree(b);
@@ -200,9 +202,7 @@
* tty_buffer_flush - flush full tty buffers
* @tty: tty to flush
*
- * flush all the buffers containing receive data. If the buffer is
- * being processed by flush_to_ldisc then we defer the processing
- * to that function
+ * flush all the buffers containing receive data.
*
* Locking: takes buffer lock to ensure single-threaded flip buffer
* 'consumer'
@@ -230,31 +230,49 @@
* tty_buffer_request_room - grow tty buffer if needed
* @tty: tty structure
* @size: size desired
+ * @flags: buffer flags if new buffer allocated (default = 0)
*
* Make at least size bytes of linear space available for the tty
* buffer. If we fail return the size we managed to find.
+ *
+ * Will change over to a new buffer if the current buffer is encoded as
+ * TTY_NORMAL (so has no flags buffer) and the new buffer requires
+ * a flags buffer.
*/
-int tty_buffer_request_room(struct tty_port *port, size_t size)
+static int __tty_buffer_request_room(struct tty_port *port, size_t size,
+ int flags)
{
struct tty_bufhead *buf = &port->buf;
struct tty_buffer *b, *n;
- int left;
+ int left, change;
b = buf->tail;
- left = b->size - b->used;
+ if (b->flags & TTYB_NORMAL)
+ left = 2 * b->size - b->used;
+ else
+ left = b->size - b->used;
- if (left < size) {
+ change = (b->flags & TTYB_NORMAL) && (~flags & TTYB_NORMAL);
+ if (change || left < size) {
/* This is the slow path - looking for new buffers to use */
if ((n = tty_buffer_alloc(port, size)) != NULL) {
+ n->flags = flags;
buf->tail = n;
b->commit = b->used;
smp_mb();
b->next = n;
- } else
+ } else if (change)
+ size = 0;
+ else
size = left;
}
return size;
}
+
+int tty_buffer_request_room(struct tty_port *port, size_t size)
+{
+ return __tty_buffer_request_room(port, size, 0);
+}
EXPORT_SYMBOL_GPL(tty_buffer_request_room);
/**
@@ -274,12 +292,14 @@
int copied = 0;
do {
int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
- int space = tty_buffer_request_room(port, goal);
+ int flags = (flag == TTY_NORMAL) ? TTYB_NORMAL : 0;
+ int space = __tty_buffer_request_room(port, goal, flags);
struct tty_buffer *tb = port->buf.tail;
if (unlikely(space == 0))
break;
memcpy(char_buf_ptr(tb, tb->used), chars, space);
- memset(flag_buf_ptr(tb, tb->used), flag, space);
+ if (~tb->flags & TTYB_NORMAL)
+ memset(flag_buf_ptr(tb, tb->used), flag, space);
tb->used += space;
copied += space;
chars += space;
@@ -362,52 +382,28 @@
int tty_prepare_flip_string(struct tty_port *port, unsigned char **chars,
size_t size)
{
- int space = tty_buffer_request_room(port, size);
+ int space = __tty_buffer_request_room(port, size, TTYB_NORMAL);
if (likely(space)) {
struct tty_buffer *tb = port->buf.tail;
*chars = char_buf_ptr(tb, tb->used);
- memset(flag_buf_ptr(tb, tb->used), TTY_NORMAL, space);
+ if (~tb->flags & TTYB_NORMAL)
+ memset(flag_buf_ptr(tb, tb->used), TTY_NORMAL, space);
tb->used += space;
}
return space;
}
EXPORT_SYMBOL_GPL(tty_prepare_flip_string);
-/**
- * tty_prepare_flip_string_flags - make room for characters
- * @port: tty port
- * @chars: return pointer for character write area
- * @flags: return pointer for status flag write area
- * @size: desired size
- *
- * Prepare a block of space in the buffer for data. Returns the length
- * available and buffer pointer to the space which is now allocated and
- * accounted for as ready for characters. This is used for drivers
- * that need their own block copy routines into the buffer. There is no
- * guarantee the buffer is a DMA target!
- */
-
-int tty_prepare_flip_string_flags(struct tty_port *port,
- unsigned char **chars, char **flags, size_t size)
-{
- int space = tty_buffer_request_room(port, size);
- if (likely(space)) {
- struct tty_buffer *tb = port->buf.tail;
- *chars = char_buf_ptr(tb, tb->used);
- *flags = flag_buf_ptr(tb, tb->used);
- tb->used += space;
- }
- return space;
-}
-EXPORT_SYMBOL_GPL(tty_prepare_flip_string_flags);
-
static int
receive_buf(struct tty_struct *tty, struct tty_buffer *head, int count)
{
struct tty_ldisc *disc = tty->ldisc;
unsigned char *p = char_buf_ptr(head, head->read);
- char *f = flag_buf_ptr(head, head->read);
+ char *f = NULL;
+
+ if (~head->flags & TTYB_NORMAL)
+ f = flag_buf_ptr(head, head->read);
if (disc->ops->receive_buf2)
count = disc->ops->receive_buf2(tty, p, f, count);
@@ -533,7 +529,25 @@
buf->head = &buf->sentinel;
buf->tail = &buf->sentinel;
init_llist_head(&buf->free);
- atomic_set(&buf->memory_used, 0);
+ atomic_set(&buf->mem_used, 0);
atomic_set(&buf->priority, 0);
INIT_WORK(&buf->work, flush_to_ldisc);
+ buf->mem_limit = TTYB_DEFAULT_MEM_LIMIT;
}
+
+/**
+ * tty_buffer_set_limit - change the tty buffer memory limit
+ * @port: tty port to change
+ *
+ * Change the tty buffer memory limit.
+ * Must be called before the other tty buffer functions are used.
+ */
+
+int tty_buffer_set_limit(struct tty_port *port, int limit)
+{
+ if (limit < MIN_TTYB_SIZE)
+ return -EINVAL;
+ port->buf.mem_limit = limit;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(tty_buffer_set_limit);
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index 0ddb5c0..0891ea0 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h
@@ -203,7 +203,6 @@
bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
void *dma_rx_param;
void *dma_tx_param;
- bool dma_rx_poll_enable;
unsigned int dma_rx_poll_rate;
unsigned int dma_rx_poll_timeout;
void (*init) (void);
diff --git a/include/linux/init.h b/include/linux/init.h
index 8e68a64..e168880 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -286,9 +286,11 @@
#define arch_initcall(fn) module_init(fn)
#define subsys_initcall(fn) module_init(fn)
#define fs_initcall(fn) module_init(fn)
+#define rootfs_initcall(fn) module_init(fn)
#define device_initcall(fn) module_init(fn)
#define late_initcall(fn) module_init(fn)
+#define console_initcall(fn) module_init(fn)
#define security_initcall(fn) module_init(fn)
/* Each module must use one module_init(). */
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 97d660e..ad98b437 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -39,10 +39,14 @@
int size;
int commit;
int read;
+ int flags;
/* Data points here */
unsigned long data[0];
};
+/* Values for .flags field of tty_buffer */
+#define TTYB_NORMAL 1 /* buffer has no flags buffer */
+
static inline unsigned char *char_buf_ptr(struct tty_buffer *b, int ofs)
{
return ((unsigned char *)b->data) + ofs;
@@ -60,7 +64,8 @@
atomic_t priority;
struct tty_buffer sentinel;
struct llist_head free; /* Free queue head */
- atomic_t memory_used; /* In-use buffers excluding free list */
+ atomic_t mem_used; /* In-use buffers excluding free list */
+ int mem_limit;
struct tty_buffer *tail; /* Active buffer */
};
/*
diff --git a/include/linux/tty_flip.h b/include/linux/tty_flip.h
index 21ddd7d..c28dd52 100644
--- a/include/linux/tty_flip.h
+++ b/include/linux/tty_flip.h
@@ -1,6 +1,7 @@
#ifndef _LINUX_TTY_FLIP_H
#define _LINUX_TTY_FLIP_H
+extern int tty_buffer_set_limit(struct tty_port *port, int limit);
extern int tty_buffer_space_avail(struct tty_port *port);
extern int tty_buffer_request_room(struct tty_port *port, size_t size);
extern int tty_insert_flip_string_flags(struct tty_port *port,
@@ -9,8 +10,6 @@
const unsigned char *chars, char flag, size_t size);
extern int tty_prepare_flip_string(struct tty_port *port,
unsigned char **chars, size_t size);
-extern int tty_prepare_flip_string_flags(struct tty_port *port,
- unsigned char **chars, char **flags, size_t size);
extern void tty_flip_buffer_push(struct tty_port *port);
void tty_schedule_flip(struct tty_port *port);
@@ -18,8 +17,12 @@
unsigned char ch, char flag)
{
struct tty_buffer *tb = port->buf.tail;
- if (tb && tb->used < tb->size) {
- *flag_buf_ptr(tb, tb->used) = flag;
+ int change;
+
+ change = (tb->flags & TTYB_NORMAL) && (flag != TTY_NORMAL);
+ if (!change && tb->used < tb->size) {
+ if (~tb->flags & TTYB_NORMAL)
+ *flag_buf_ptr(tb, tb->used) = flag;
*char_buf_ptr(tb, tb->used++) = ch;
return 1;
}
diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h
index f15c898..b8347c20 100644
--- a/include/linux/tty_ldisc.h
+++ b/include/linux/tty_ldisc.h
@@ -84,7 +84,8 @@
* processing. <cp> is a pointer to the buffer of input
* character received by the device. <fp> is a pointer to a
* pointer of flag bytes which indicate whether a character was
- * received with a parity error, etc.
+ * received with a parity error, etc. <fp> may be NULL to indicate
+ * all data received is TTY_NORMAL.
*
* void (*write_wakeup)(struct tty_struct *);
*
@@ -118,7 +119,8 @@
* processing. <cp> is a pointer to the buffer of input
* character received by the device. <fp> is a pointer to a
* pointer of flag bytes which indicate whether a character was
- * received with a parity error, etc.
+ * received with a parity error, etc. <fp> may be NULL to indicate
+ * all data received is TTY_NORMAL.
* If assigned, prefer this function for automatic flow control.
*/