| /* Copyright (c) 2010-2017, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| #ifndef __KGSL_PWRCTRL_H |
| #define __KGSL_PWRCTRL_H |
| |
| #include <linux/pm_qos.h> |
| |
| /***************************************************************************** |
| * power flags |
| ****************************************************************************/ |
| #define KGSL_PWRFLAGS_ON 1 |
| #define KGSL_PWRFLAGS_OFF 0 |
| |
| #define KGSL_PWRLEVEL_TURBO 0 |
| |
| #define KGSL_PWR_ON 0xFFFF |
| |
| #define KGSL_MAX_CLKS 16 |
| #define KGSL_MAX_REGULATORS 2 |
| |
| #define KGSL_MAX_PWRLEVELS 10 |
| |
| /* Only two supported levels, min & max */ |
| #define KGSL_CONSTRAINT_PWR_MAXLEVELS 2 |
| |
| #define KGSL_XO_CLK_FREQ 19200000 |
| #define KGSL_RBBMTIMER_CLK_FREQ KGSL_XO_CLK_FREQ |
| #define KGSL_ISENSE_CLK_FREQ 200000000 |
| |
| /* Symbolic table for the constraint type */ |
| #define KGSL_CONSTRAINT_TYPES \ |
| { KGSL_CONSTRAINT_NONE, "None" }, \ |
| { KGSL_CONSTRAINT_PWRLEVEL, "Pwrlevel" } |
| /* Symbolic table for the constraint sub type */ |
| #define KGSL_CONSTRAINT_PWRLEVEL_SUBTYPES \ |
| { KGSL_CONSTRAINT_PWR_MIN, "Min" }, \ |
| { KGSL_CONSTRAINT_PWR_MAX, "Max" } |
| |
| #define KGSL_PWR_ADD_LIMIT 0 |
| #define KGSL_PWR_DEL_LIMIT 1 |
| #define KGSL_PWR_SET_LIMIT 2 |
| |
| enum kgsl_pwrctrl_timer_type { |
| KGSL_PWR_IDLE_TIMER, |
| }; |
| |
| /* |
| * States for thermal cycling. _DISABLE means that no cycling has been |
| * requested. _ENABLE means that cycling has been requested, but GPU |
| * DCVS is currently recommending running at a lower frequency than the |
| * cycle frequency. _ACTIVE means that the frequency is actively being |
| * cycled. |
| */ |
| #define CYCLE_DISABLE 0 |
| #define CYCLE_ENABLE 1 |
| #define CYCLE_ACTIVE 2 |
| |
| struct platform_device; |
| |
| struct kgsl_clk_stats { |
| unsigned int busy; |
| unsigned int total; |
| unsigned int busy_old; |
| unsigned int total_old; |
| }; |
| |
| struct kgsl_pwr_constraint { |
| unsigned int type; |
| unsigned int sub_type; |
| union { |
| struct { |
| unsigned int level; |
| } pwrlevel; |
| } hint; |
| unsigned long expires; |
| uint32_t owner_id; |
| }; |
| |
| /** |
| * struct kgsl_pwrlevel - Struct holding different pwrlevel info obtained from |
| * from dtsi file |
| * @gpu_freq: GPU frequency vote in Hz |
| * @bus_freq: Bus bandwidth vote index |
| * @bus_min: Min bus index @gpu_freq |
| * @bus_max: Max bus index @gpu_freq |
| */ |
| struct kgsl_pwrlevel { |
| unsigned int gpu_freq; |
| unsigned int bus_freq; |
| unsigned int bus_min; |
| unsigned int bus_max; |
| }; |
| |
| struct kgsl_regulator { |
| struct regulator *reg; |
| char name[8]; |
| }; |
| |
| /** |
| * struct kgsl_pwrctrl - Power control settings for a KGSL device |
| * @interrupt_num - The interrupt number for the device |
| * @grp_clks - Array of clocks structures that we control |
| * @power_flags - Control flags for power |
| * @pwrlevels - List of supported power levels |
| * @active_pwrlevel - The currently active power level |
| * @previous_pwrlevel - The power level before transition |
| * @thermal_pwrlevel - maximum powerlevel constraint from thermal |
| * @default_pwrlevel - device wake up power level |
| * @max_pwrlevel - maximum allowable powerlevel per the user |
| * @min_pwrlevel - minimum allowable powerlevel per the user |
| * @num_pwrlevels - number of available power levels |
| * @interval_timeout - timeout in jiffies to be idle before a power event |
| * @clock_times - Each GPU frequency's accumulated active time in us |
| * @regulators - array of pointers to kgsl_regulator structs |
| * @pcl - bus scale identifier |
| * @ocmem - ocmem bus scale identifier |
| * @irq_name - resource name for the IRQ |
| * @clk_stats - structure of clock statistics |
| * @l2pc_cpus_mask - mask to avoid L2PC on masked CPUs |
| * @l2pc_cpus_qos - qos structure to avoid L2PC on CPUs |
| * @pm_qos_req_dma - the power management quality of service structure |
| * @pm_qos_active_latency - allowed CPU latency in microseconds when active |
| * @pm_qos_cpu_mask_latency - allowed CPU mask latency in microseconds |
| * @pm_qos_wakeup_latency - allowed CPU latency in microseconds during wakeup |
| * @bus_control - true if the bus calculation is independent |
| * @bus_mod - modifier from the current power level for the bus vote |
| * @bus_percent_ab - current percent of total possible bus usage |
| * @bus_width - target specific bus width in number of bytes |
| * @bus_ab_mbytes - AB vote in Mbytes for current bus usage |
| * @bus_index - default bus index into the bus_ib table |
| * @bus_ib - the set of unique ib requests needed for the bus calculation |
| * @constraint - currently active power constraint |
| * @superfast - Boolean flag to indicate that the GPU start should be run in the |
| * higher priority thread |
| * @thermal_cycle_ws - Work struct for scheduling thermal cycling |
| * @thermal_timer - Timer for thermal cycling |
| * @thermal_timeout - Cycling timeout for switching between frequencies |
| * @thermal_cycle - Is thermal cycling enabled |
| * @thermal_highlow - flag for swithcing between high and low frequency |
| * @limits - list head for limits |
| * @limits_lock - spin lock to protect limits list |
| * @sysfs_pwr_limit - pointer to the sysfs limits node |
| * isense_clk_indx - index of isense clock, 0 if no isense |
| * isense_clk_on_level - isense clock rate is XO rate below this level. |
| * tzone_name - pointer to thermal zone name of GPU temperature sensor |
| */ |
| |
| struct kgsl_pwrctrl { |
| int interrupt_num; |
| struct clk *grp_clks[KGSL_MAX_CLKS]; |
| struct clk *gpu_bimc_int_clk; |
| int isense_clk_indx; |
| int isense_clk_on_level; |
| unsigned long power_flags; |
| unsigned long ctrl_flags; |
| struct kgsl_pwrlevel pwrlevels[KGSL_MAX_PWRLEVELS]; |
| unsigned int active_pwrlevel; |
| unsigned int previous_pwrlevel; |
| unsigned int thermal_pwrlevel; |
| unsigned int default_pwrlevel; |
| unsigned int wakeup_maxpwrlevel; |
| unsigned int max_pwrlevel; |
| unsigned int min_pwrlevel; |
| unsigned int num_pwrlevels; |
| unsigned long interval_timeout; |
| u64 clock_times[KGSL_MAX_PWRLEVELS]; |
| struct kgsl_regulator regulators[KGSL_MAX_REGULATORS]; |
| uint32_t pcl; |
| uint32_t ocmem_pcl; |
| const char *irq_name; |
| struct kgsl_clk_stats clk_stats; |
| unsigned int l2pc_cpus_mask; |
| struct pm_qos_request l2pc_cpus_qos; |
| struct pm_qos_request pm_qos_req_dma; |
| unsigned int pm_qos_active_latency; |
| unsigned int pm_qos_cpu_mask_latency; |
| unsigned int pm_qos_wakeup_latency; |
| bool bus_control; |
| int bus_mod; |
| unsigned int bus_percent_ab; |
| unsigned int bus_width; |
| unsigned long bus_ab_mbytes; |
| struct device *devbw; |
| unsigned int bus_index[KGSL_MAX_PWRLEVELS]; |
| uint64_t *bus_ib; |
| struct kgsl_pwr_constraint constraint; |
| bool superfast; |
| struct work_struct thermal_cycle_ws; |
| struct timer_list thermal_timer; |
| uint32_t thermal_timeout; |
| uint32_t thermal_cycle; |
| uint32_t thermal_highlow; |
| struct list_head limits; |
| spinlock_t limits_lock; |
| struct kgsl_pwr_limit *sysfs_pwr_limit; |
| unsigned int gpu_bimc_int_clk_freq; |
| bool gpu_bimc_interface_enabled; |
| const char *tzone_name; |
| }; |
| |
| int kgsl_pwrctrl_init(struct kgsl_device *device); |
| void kgsl_pwrctrl_close(struct kgsl_device *device); |
| void kgsl_timer(unsigned long data); |
| void kgsl_idle_check(struct work_struct *work); |
| void kgsl_pre_hwaccess(struct kgsl_device *device); |
| void kgsl_pwrctrl_pwrlevel_change(struct kgsl_device *device, |
| unsigned int level); |
| void kgsl_pwrctrl_buslevel_update(struct kgsl_device *device, |
| bool on); |
| int kgsl_pwrctrl_init_sysfs(struct kgsl_device *device); |
| void kgsl_pwrctrl_uninit_sysfs(struct kgsl_device *device); |
| int kgsl_pwrctrl_change_state(struct kgsl_device *device, int state); |
| |
| static inline unsigned long kgsl_get_clkrate(struct clk *clk) |
| { |
| return (clk != NULL) ? clk_get_rate(clk) : 0; |
| } |
| |
| /* |
| * kgsl_pwrctrl_active_freq - get currently configured frequency |
| * @pwr: kgsl_pwrctrl structure for the device |
| * |
| * Returns the currently configured frequency for the device. |
| */ |
| static inline unsigned long |
| kgsl_pwrctrl_active_freq(struct kgsl_pwrctrl *pwr) |
| { |
| return pwr->pwrlevels[pwr->active_pwrlevel].gpu_freq; |
| } |
| |
| int __must_check kgsl_active_count_get(struct kgsl_device *device); |
| void kgsl_active_count_put(struct kgsl_device *device); |
| int kgsl_active_count_wait(struct kgsl_device *device, int count); |
| void kgsl_pwrctrl_busy_time(struct kgsl_device *device, u64 time, u64 busy); |
| void kgsl_pwrctrl_set_constraint(struct kgsl_device *device, |
| struct kgsl_pwr_constraint *pwrc, uint32_t id); |
| void kgsl_pwrctrl_update_l2pc(struct kgsl_device *device); |
| #endif /* __KGSL_PWRCTRL_H */ |