arch/s390/Kconfig - kernel/msm-4.9 - Gitiles

 #
 # For a description of the syntax of this configuration file,
 # see Documentation/kbuild/kconfig-language.txt.
 #

 config MMU
 	bool
 	default y

 config RWSEM_GENERIC_SPINLOCK
 	bool

 config RWSEM_XCHGADD_ALGORITHM
 	bool
 	default y

 config GENERIC_HWEIGHT
 	bool
 	default y

 config GENERIC_CALIBRATE_DELAY
 	bool
 	default y

 config GENERIC_BUST_SPINLOCK
 	bool

 mainmenu "Linux Kernel Configuration"

 config S390
 	bool
 	default y

 source "init/Kconfig"

 menu "Base setup"

 comment "Processor type and features"

 config 64BIT
 	bool "64 bit kernel"
 	help
 	  Select this option if you have a 64 bit IBM zSeries machine
 	  and want to use the 64 bit addressing mode.

 config SMP
 	bool "Symmetric multi-processing support"
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
 	  you have a system with more than one CPU, say Y.

 	  If you say N here, the kernel will run on single and multiprocessor
 	  machines, but will use only one CPU of a multiprocessor machine. If
 	  you say Y here, the kernel will run on many, but not all,
 	  singleprocessor machines. On a singleprocessor machine, the kernel
 	  will run faster if you say N here.

 	  See also the <file:Documentation/smp.txt> and the SMP-HOWTO
 	  available at <http://www.tldp.org/docs.html#howto>.

 	  Even if you don't know what to do here, say Y.

 config NR_CPUS
 	int "Maximum number of CPUs (2-64)"
 	range 2 64
 	depends on SMP
 	default "32"
 	help
 	  This allows you to specify the maximum number of CPUs which this
 	  kernel will support.  The maximum supported value is 64 and the
 	  minimum value which makes sense is 2.

 	  This is purely to save memory - each supported CPU adds
 	  approximately sixteen kilobytes to the kernel image.

 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs"
 	depends on SMP
 	select HOTPLUG
 	default n
 	help
 	  Say Y here to be able to turn CPUs off and on. CPUs
 	  can be controlled through /sys/devices/system/cpu/cpu#.
 	  Say N if you want to disable CPU hotplug.

 config DEFAULT_MIGRATION_COST
 	int
 	default "1000000"

 config MATHEMU
 	bool "IEEE FPU emulation"
 	depends on MARCH_G5
 	help
 	  This option is required for IEEE compliant floating point arithmetic
 	  on older S/390 machines. Say Y unless you know your machine doesn't
 	  need this.

 config COMPAT
 	bool "Kernel support for 31 bit emulation"
 	depends on 64BIT
 	help
 	  Select this option if you want to enable your system kernel to
 	  handle system-calls from ELF binaries for 31 bit ESA.  This option
 	  (and some other stuff like libraries and such) is needed for
 	  executing 31 bit applications.  It is safe to say "Y".

 config SYSVIPC_COMPAT
 	bool
 	depends on COMPAT && SYSVIPC
 	default y

 config BINFMT_ELF32
 	tristate "Kernel support for 31 bit ELF binaries"
 	depends on COMPAT
 	help
 	  This allows you to run 32-bit Linux/ELF binaries on your zSeries
 	  in 64 bit mode. Everybody wants this; say Y.

 comment "Code generation options"

 choice
 	prompt "Processor type"
 	default MARCH_G5

 config MARCH_G5
 	bool "S/390 model G5 and G6"
 	depends on !64BIT
 	help
 	  Select this to build a 31 bit kernel that works
 	  on all S/390 and zSeries machines.

 config MARCH_Z900
 	bool "IBM eServer zSeries model z800 and z900"
 	help
 	  Select this to optimize for zSeries machines. This
 	  will enable some optimizations that are not available
 	  on older 31 bit only CPUs.

 config MARCH_Z990
 	bool "IBM eServer zSeries model z890 and z990"
 	help
 	  Select this enable optimizations for model z890/z990.
 	  This will be slightly faster but does not work on
 	  older machines such as the z900.

 endchoice

 config PACK_STACK
 	bool "Pack kernel stack"
 	help
 	  This option enables the compiler option -mkernel-backchain if it
 	  is available. If the option is available the compiler supports
 	  the new stack layout which dramatically reduces the minimum stack
 	  frame size. With an old compiler a non-leaf function needs a
 	  minimum of 96 bytes on 31 bit and 160 bytes on 64 bit. With
 	  -mkernel-backchain the minimum size drops to 16 byte on 31 bit
 	  and 24 byte on 64 bit.

 	  Say Y if you are unsure.

 config SMALL_STACK
 	bool "Use 4kb/8kb for kernel stack instead of 8kb/16kb"
 	depends on PACK_STACK
 	help
 	  If you say Y here and the compiler supports the -mkernel-backchain
 	  option the kernel will use a smaller kernel stack size. For 31 bit
 	  the reduced size is 4kb instead of 8kb and for 64 bit it is 8kb
 	  instead of 16kb. This allows to run more thread on a system and
 	  reduces the pressure on the memory management for higher order
 	  page allocations.

 	  Say N if you are unsure.


 config CHECK_STACK
 	bool "Detect kernel stack overflow"
 	help
 	  This option enables the compiler option -mstack-guard and
 	  -mstack-size if they are available. If the compiler supports them
 	  it will emit additional code to each function prolog to trigger
 	  an illegal operation if the kernel stack is about to overflow.

 	  Say N if you are unsure.

 config STACK_GUARD
 	int "Size of the guard area (128-1024)"
 	range 128 1024
 	depends on CHECK_STACK
 	default "256"
 	help
 	  This allows you to specify the size of the guard area at the lower
 	  end of the kernel stack. If the kernel stack points into the guard
 	  area on function entry an illegal operation is triggered. The size
 	  needs to be a power of 2. Please keep in mind that the size of an
 	  interrupt frame is 184 bytes for 31 bit and 328 bytes on 64 bit.
 	  The minimum size for the stack guard should be 256 for 31 bit and
 	  512 for 64 bit.

 config WARN_STACK
 	bool "Emit compiler warnings for function with broken stack usage"
 	help
 	  This option enables the compiler options -mwarn-framesize and
 	  -mwarn-dynamicstack. If the compiler supports these options it
 	  will generate warnings for function which either use alloca or
 	  create a stack frame bigger then CONFIG_WARN_STACK_SIZE.

 	  Say N if you are unsure.

 config WARN_STACK_SIZE
 	int "Maximum frame size considered safe (128-2048)"
 	range 128 2048
 	depends on WARN_STACK
 	default "256"
 	help
 	  This allows you to specify the maximum frame size a function may
 	  have without the compiler complaining about it.

 source "mm/Kconfig"

 comment "I/O subsystem configuration"

 config MACHCHK_WARNING
 	bool "Process warning machine checks"
 	help
 	  Select this option if you want the machine check handler on IBM S/390 or
 	  zSeries to process warning machine checks (e.g. on power failures).
 	  If unsure, say "Y".

 config QDIO
 	tristate "QDIO support"
 	---help---
 	  This driver provides the Queued Direct I/O base support for
 	  IBM mainframes.

 	  For details please refer to the documentation provided by IBM at
 	  <http://www10.software.ibm.com/developerworks/opensource/linux390>

 	  To compile this driver as a module, choose M here: the
 	  module will be called qdio.

 	  If unsure, say Y.

 config QDIO_PERF_STATS
 	bool "Performance statistics in /proc"
 	depends on QDIO
 	help
 	  Say Y here to get performance statistics in /proc/qdio_perf

 	  If unsure, say N.

 config QDIO_DEBUG
 	bool "Extended debugging information"
 	depends on QDIO
 	help
 	  Say Y here to get extended debugging output in
 	    /sys/kernel/debug/s390dbf/qdio...
 	  Warning: this option reduces the performance of the QDIO module.

 	  If unsure, say N.

 comment "Misc"

 config PREEMPT
 	bool "Preemptible Kernel"
 	help
 	  This option reduces the latency of the kernel when reacting to
 	  real-time or interactive events by allowing a low priority process to
 	  be preempted even if it is in kernel mode executing a system call.
 	  This allows applications to run more reliably even when the system is
 	  under load.

 	  Say N if you are unsure.

 config IPL
 	bool "Builtin IPL record support"
 	help
 	  If you want to use the produced kernel to IPL directly from a
 	  device, you have to merge a bootsector specific to the device
 	  into the first bytes of the kernel. You will have to select the
 	  IPL device.

 choice
 	prompt "IPL method generated into head.S"
 	depends on IPL
 	default IPL_TAPE
 	help
 	  Select "tape" if you want to IPL the image from a Tape.

 	  Select "vm_reader" if you are running under VM/ESA and want
 	  to IPL the image from the emulated card reader.

 config IPL_TAPE
 	bool "tape"

 config IPL_VM
 	bool "vm_reader"

 endchoice

 source "fs/Kconfig.binfmt"

 config PROCESS_DEBUG
 	bool "Show crashed user process info"
 	help
 	  Say Y to print all process fault locations to the console.  This is
 	  a debugging option; you probably do not want to set it unless you
 	  are an S390 port maintainer.

 config PFAULT
 	bool "Pseudo page fault support"
 	help
 	  Select this option, if you want to use PFAULT pseudo page fault
 	  handling under VM. If running native or in LPAR, this option
 	  has no effect. If your VM does not support PFAULT, PAGEEX
 	  pseudo page fault handling will be used.
 	  Note that VM 4.2 supports PFAULT but has a bug in its
 	  implementation that causes some problems.
 	  Everybody who wants to run Linux under VM != VM4.2 should select
 	  this option.

 config SHARED_KERNEL
 	bool "VM shared kernel support"
 	help
 	  Select this option, if you want to share the text segment of the
 	  Linux kernel between different VM guests. This reduces memory
 	  usage with lots of guests but greatly increases kernel size.
 	  You should only select this option if you know what you are
 	  doing and want to exploit this feature.

 config CMM
 	tristate "Cooperative memory management"
 	help
 	  Select this option, if you want to enable the kernel interface
 	  to reduce the memory size of the system. This is accomplished
 	  by allocating pages of memory and put them "on hold". This only
 	  makes sense for a system running under VM where the unused pages
 	  will be reused by VM for other guest systems. The interface
 	  allows an external monitor to balance memory of many systems.
 	  Everybody who wants to run Linux under VM should select this
 	  option.

 config CMM_PROC
 	bool "/proc interface to cooperative memory management"
 	depends on CMM
 	help
 	  Select this option to enable the /proc interface to the
 	  cooperative memory management.

 config CMM_IUCV
 	bool "IUCV special message interface to cooperative memory management"
 	depends on CMM && (SMSGIUCV=y || CMM=SMSGIUCV)
 	help
 	  Select this option to enable the special message interface to
 	  the cooperative memory management.

 config VIRT_TIMER
 	bool "Virtual CPU timer support"
 	help
 	  This provides a kernel interface for virtual CPU timers.
 	  Default is disabled.

 config VIRT_CPU_ACCOUNTING
 	bool "Base user process accounting on virtual cpu timer"
 	depends on VIRT_TIMER
 	help
 	  Select this option to use CPU timer deltas to do user
 	  process accounting.

 config APPLDATA_BASE
 	bool "Linux - VM Monitor Stream, base infrastructure"
 	depends on PROC_FS && VIRT_TIMER=y
 	help
 	  This provides a kernel interface for creating and updating z/VM APPLDATA
 	  monitor records. The monitor records are updated at certain time
 	  intervals, once the timer is started.
 	  Writing 1 or 0 to /proc/appldata/timer starts(1) or stops(0) the timer,
 	  i.e. enables or disables monitoring on the Linux side.
 	  A custom interval value (in seconds) can be written to
 	  /proc/appldata/interval.

 	  Defaults are 60 seconds interval and timer off.
 	  The /proc entries can also be read from, showing the current settings.

 config APPLDATA_MEM
 	tristate "Monitor memory management statistics"
 	depends on APPLDATA_BASE
 	help
 	  This provides memory management related data to the Linux - VM Monitor
 	  Stream, like paging/swapping rate, memory utilisation, etc.
 	  Writing 1 or 0 to /proc/appldata/memory creates(1) or removes(0) a z/VM
 	  APPLDATA monitor record, i.e. enables or disables monitoring this record
 	  on the z/VM side.

 	  Default is disabled.
 	  The /proc entry can also be read from, showing the current settings.

 	  This can also be compiled as a module, which will be called
 	  appldata_mem.o.

 config APPLDATA_OS
 	tristate "Monitor OS statistics"
 	depends on APPLDATA_BASE
 	help
 	  This provides OS related data to the Linux - VM Monitor Stream, like
 	  CPU utilisation, etc.
 	  Writing 1 or 0 to /proc/appldata/os creates(1) or removes(0) a z/VM
 	  APPLDATA monitor record, i.e. enables or disables monitoring this record
 	  on the z/VM side.

 	  Default is disabled.
 	  This can also be compiled as a module, which will be called
 	  appldata_os.o.

 config APPLDATA_NET_SUM
 	tristate "Monitor overall network statistics"
 	depends on APPLDATA_BASE
 	help
 	  This provides network related data to the Linux - VM Monitor Stream,
 	  currently there is only a total sum of network I/O statistics, no
 	  per-interface data.
 	  Writing 1 or 0 to /proc/appldata/net_sum creates(1) or removes(0) a z/VM
 	  APPLDATA monitor record, i.e. enables or disables monitoring this record
 	  on the z/VM side.

 	  Default is disabled.
 	  This can also be compiled as a module, which will be called
 	  appldata_net_sum.o.

 config NO_IDLE_HZ
 	bool "No HZ timer ticks in idle"
 	help
 	  Switches the regular HZ timer off when the system is going idle.
 	  This helps z/VM to detect that the Linux system is idle. VM can
 	  then "swap-out" this guest which reduces memory usage. It also
 	  reduces the overhead of idle systems.

 	  The HZ timer can be switched on/off via /proc/sys/kernel/hz_timer.
 	  hz_timer=0 means HZ timer is disabled. hz_timer=1 means HZ
 	  timer is active.

 config NO_IDLE_HZ_INIT
 	bool "HZ timer in idle off by default"
 	depends on NO_IDLE_HZ
 	help
 	  The HZ timer is switched off in idle by default. That means the
 	  HZ timer is already disabled at boot time.

 config S390_HYPFS_FS
 	bool "s390 hypervisor file system support"
 	select SYS_HYPERVISOR
 	default y
 	help
 	  This is a virtual file system intended to provide accounting
 	  information in an s390 hypervisor environment.

 config KEXEC
 	bool "kexec system call (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
 	  but is independent of hardware/microcode support.

 endmenu

 source "net/Kconfig"

 config PCMCIA
 	bool
 	default n

 source "drivers/base/Kconfig"

 source "drivers/connector/Kconfig"

 source "drivers/scsi/Kconfig"

 source "drivers/s390/Kconfig"

 source "drivers/net/Kconfig"

 source "fs/Kconfig"

 source "arch/s390/oprofile/Kconfig"

 source "arch/s390/Kconfig.debug"

 source "security/Kconfig"

 source "crypto/Kconfig"

 source "lib/Kconfig"
	#
	# For a description of the syntax of this configuration file,
	# see Documentation/kbuild/kconfig-language.txt.
	#

	config MMU
	bool
	default y

	config RWSEM_GENERIC_SPINLOCK
	bool

	config RWSEM_XCHGADD_ALGORITHM
	bool
	default y

	config GENERIC_HWEIGHT
	bool
	default y

	config GENERIC_CALIBRATE_DELAY
	bool
	default y

	config GENERIC_BUST_SPINLOCK
	bool

	mainmenu "Linux Kernel Configuration"

	config S390
	bool
	default y

	source "init/Kconfig"

	menu "Base setup"

	comment "Processor type and features"

	config 64BIT
	bool "64 bit kernel"
	help
	Select this option if you have a 64 bit IBM zSeries machine
	and want to use the 64 bit addressing mode.

	config SMP
	bool "Symmetric multi-processing support"
	---help---
	This enables support for systems with more than one CPU. If you have
	a system with only one CPU, like most personal computers, say N. If
	you have a system with more than one CPU, say Y.

	If you say N here, the kernel will run on single and multiprocessor
	machines, but will use only one CPU of a multiprocessor machine. If
	you say Y here, the kernel will run on many, but not all,
	singleprocessor machines. On a singleprocessor machine, the kernel
	will run faster if you say N here.

	See also the <file:Documentation/smp.txt> and the SMP-HOWTO
	available at <http://www.tldp.org/docs.html#howto>.

	Even if you don't know what to do here, say Y.

	config NR_CPUS
	int "Maximum number of CPUs (2-64)"
	range 2 64
	depends on SMP
	default "32"
	help
	This allows you to specify the maximum number of CPUs which this
	kernel will support. The maximum supported value is 64 and the
	minimum value which makes sense is 2.

	This is purely to save memory - each supported CPU adds
	approximately sixteen kilobytes to the kernel image.

	config HOTPLUG_CPU
	bool "Support for hot-pluggable CPUs"
	depends on SMP
	select HOTPLUG
	default n
	help
	Say Y here to be able to turn CPUs off and on. CPUs
	can be controlled through /sys/devices/system/cpu/cpu#.
	Say N if you want to disable CPU hotplug.

	config DEFAULT_MIGRATION_COST
	int
	default "1000000"

	config MATHEMU
	bool "IEEE FPU emulation"
	depends on MARCH_G5
	help
	This option is required for IEEE compliant floating point arithmetic
	on older S/390 machines. Say Y unless you know your machine doesn't
	need this.

	config COMPAT
	bool "Kernel support for 31 bit emulation"
	depends on 64BIT
	help
	Select this option if you want to enable your system kernel to
	handle system-calls from ELF binaries for 31 bit ESA. This option
	(and some other stuff like libraries and such) is needed for
	executing 31 bit applications. It is safe to say "Y".

	config SYSVIPC_COMPAT
	bool
	depends on COMPAT && SYSVIPC
	default y

	config BINFMT_ELF32
	tristate "Kernel support for 31 bit ELF binaries"
	depends on COMPAT
	help
	This allows you to run 32-bit Linux/ELF binaries on your zSeries
	in 64 bit mode. Everybody wants this; say Y.

	comment "Code generation options"

	choice
	prompt "Processor type"
	default MARCH_G5

	config MARCH_G5
	bool "S/390 model G5 and G6"
	depends on !64BIT
	help
	Select this to build a 31 bit kernel that works
	on all S/390 and zSeries machines.

	config MARCH_Z900
	bool "IBM eServer zSeries model z800 and z900"
	help
	Select this to optimize for zSeries machines. This
	will enable some optimizations that are not available
	on older 31 bit only CPUs.

	config MARCH_Z990
	bool "IBM eServer zSeries model z890 and z990"
	help
	Select this enable optimizations for model z890/z990.
	This will be slightly faster but does not work on
	older machines such as the z900.

	endchoice

	config PACK_STACK
	bool "Pack kernel stack"
	help
	This option enables the compiler option -mkernel-backchain if it
	is available. If the option is available the compiler supports
	the new stack layout which dramatically reduces the minimum stack
	frame size. With an old compiler a non-leaf function needs a
	minimum of 96 bytes on 31 bit and 160 bytes on 64 bit. With
	-mkernel-backchain the minimum size drops to 16 byte on 31 bit
	and 24 byte on 64 bit.

	Say Y if you are unsure.

	config SMALL_STACK
	bool "Use 4kb/8kb for kernel stack instead of 8kb/16kb"
	depends on PACK_STACK
	help
	If you say Y here and the compiler supports the -mkernel-backchain
	option the kernel will use a smaller kernel stack size. For 31 bit
	the reduced size is 4kb instead of 8kb and for 64 bit it is 8kb
	instead of 16kb. This allows to run more thread on a system and
	reduces the pressure on the memory management for higher order
	page allocations.

	Say N if you are unsure.


	config CHECK_STACK
	bool "Detect kernel stack overflow"
	help
	This option enables the compiler option -mstack-guard and
	-mstack-size if they are available. If the compiler supports them
	it will emit additional code to each function prolog to trigger
	an illegal operation if the kernel stack is about to overflow.

	Say N if you are unsure.

	config STACK_GUARD
	int "Size of the guard area (128-1024)"
	range 128 1024
	depends on CHECK_STACK
	default "256"
	help
	This allows you to specify the size of the guard area at the lower
	end of the kernel stack. If the kernel stack points into the guard
	area on function entry an illegal operation is triggered. The size
	needs to be a power of 2. Please keep in mind that the size of an
	interrupt frame is 184 bytes for 31 bit and 328 bytes on 64 bit.
	The minimum size for the stack guard should be 256 for 31 bit and
	512 for 64 bit.

	config WARN_STACK
	bool "Emit compiler warnings for function with broken stack usage"
	help
	This option enables the compiler options -mwarn-framesize and
	-mwarn-dynamicstack. If the compiler supports these options it
	will generate warnings for function which either use alloca or
	create a stack frame bigger then CONFIG_WARN_STACK_SIZE.

	Say N if you are unsure.

	config WARN_STACK_SIZE
	int "Maximum frame size considered safe (128-2048)"
	range 128 2048
	depends on WARN_STACK
	default "256"
	help
	This allows you to specify the maximum frame size a function may
	have without the compiler complaining about it.

	source "mm/Kconfig"

	comment "I/O subsystem configuration"

	config MACHCHK_WARNING
	bool "Process warning machine checks"
	help
	Select this option if you want the machine check handler on IBM S/390 or
	zSeries to process warning machine checks (e.g. on power failures).
	If unsure, say "Y".

	config QDIO
	tristate "QDIO support"
	---help---
	This driver provides the Queued Direct I/O base support for
	IBM mainframes.

	For details please refer to the documentation provided by IBM at
	<http://www10.software.ibm.com/developerworks/opensource/linux390>

	To compile this driver as a module, choose M here: the
	module will be called qdio.

	If unsure, say Y.

	config QDIO_PERF_STATS
	bool "Performance statistics in /proc"
	depends on QDIO
	help
	Say Y here to get performance statistics in /proc/qdio_perf

	If unsure, say N.

	config QDIO_DEBUG
	bool "Extended debugging information"
	depends on QDIO
	help
	Say Y here to get extended debugging output in
	/sys/kernel/debug/s390dbf/qdio...
	Warning: this option reduces the performance of the QDIO module.

	If unsure, say N.

	comment "Misc"

	config PREEMPT
	bool "Preemptible Kernel"
	help
	This option reduces the latency of the kernel when reacting to
	real-time or interactive events by allowing a low priority process to
	be preempted even if it is in kernel mode executing a system call.
	This allows applications to run more reliably even when the system is
	under load.

	Say N if you are unsure.

	config IPL
	bool "Builtin IPL record support"
	help
	If you want to use the produced kernel to IPL directly from a
	device, you have to merge a bootsector specific to the device
	into the first bytes of the kernel. You will have to select the
	IPL device.

	choice
	prompt "IPL method generated into head.S"
	depends on IPL
	default IPL_TAPE
	help
	Select "tape" if you want to IPL the image from a Tape.

	Select "vm_reader" if you are running under VM/ESA and want
	to IPL the image from the emulated card reader.

	config IPL_TAPE
	bool "tape"

	config IPL_VM
	bool "vm_reader"

	endchoice

	source "fs/Kconfig.binfmt"

	config PROCESS_DEBUG
	bool "Show crashed user process info"
	help
	Say Y to print all process fault locations to the console. This is
	a debugging option; you probably do not want to set it unless you
	are an S390 port maintainer.

	config PFAULT
	bool "Pseudo page fault support"
	help
	Select this option, if you want to use PFAULT pseudo page fault
	handling under VM. If running native or in LPAR, this option
	has no effect. If your VM does not support PFAULT, PAGEEX
	pseudo page fault handling will be used.
	Note that VM 4.2 supports PFAULT but has a bug in its
	implementation that causes some problems.
	Everybody who wants to run Linux under VM != VM4.2 should select
	this option.

	config SHARED_KERNEL
	bool "VM shared kernel support"
	help
	Select this option, if you want to share the text segment of the
	Linux kernel between different VM guests. This reduces memory
	usage with lots of guests but greatly increases kernel size.
	You should only select this option if you know what you are
	doing and want to exploit this feature.

	config CMM
	tristate "Cooperative memory management"
	help
	Select this option, if you want to enable the kernel interface
	to reduce the memory size of the system. This is accomplished
	by allocating pages of memory and put them "on hold". This only
	makes sense for a system running under VM where the unused pages
	will be reused by VM for other guest systems. The interface
	allows an external monitor to balance memory of many systems.
	Everybody who wants to run Linux under VM should select this
	option.

	config CMM_PROC
	bool "/proc interface to cooperative memory management"
	depends on CMM
	help
	Select this option to enable the /proc interface to the
	cooperative memory management.

	config CMM_IUCV
	bool "IUCV special message interface to cooperative memory management"
	depends on CMM && (SMSGIUCV=y \|\| CMM=SMSGIUCV)
	help
	Select this option to enable the special message interface to
	the cooperative memory management.

	config VIRT_TIMER
	bool "Virtual CPU timer support"
	help
	This provides a kernel interface for virtual CPU timers.
	Default is disabled.

	config VIRT_CPU_ACCOUNTING
	bool "Base user process accounting on virtual cpu timer"
	depends on VIRT_TIMER
	help
	Select this option to use CPU timer deltas to do user
	process accounting.

	config APPLDATA_BASE
	bool "Linux - VM Monitor Stream, base infrastructure"
	depends on PROC_FS && VIRT_TIMER=y
	help
	This provides a kernel interface for creating and updating z/VM APPLDATA
	monitor records. The monitor records are updated at certain time
	intervals, once the timer is started.
	Writing 1 or 0 to /proc/appldata/timer starts(1) or stops(0) the timer,
	i.e. enables or disables monitoring on the Linux side.
	A custom interval value (in seconds) can be written to
	/proc/appldata/interval.

	Defaults are 60 seconds interval and timer off.
	The /proc entries can also be read from, showing the current settings.

	config APPLDATA_MEM
	tristate "Monitor memory management statistics"
	depends on APPLDATA_BASE
	help
	This provides memory management related data to the Linux - VM Monitor
	Stream, like paging/swapping rate, memory utilisation, etc.
	Writing 1 or 0 to /proc/appldata/memory creates(1) or removes(0) a z/VM
	APPLDATA monitor record, i.e. enables or disables monitoring this record
	on the z/VM side.

	Default is disabled.
	The /proc entry can also be read from, showing the current settings.

	This can also be compiled as a module, which will be called
	appldata_mem.o.

	config APPLDATA_OS
	tristate "Monitor OS statistics"
	depends on APPLDATA_BASE
	help
	This provides OS related data to the Linux - VM Monitor Stream, like
	CPU utilisation, etc.
	Writing 1 or 0 to /proc/appldata/os creates(1) or removes(0) a z/VM
	APPLDATA monitor record, i.e. enables or disables monitoring this record
	on the z/VM side.

	Default is disabled.
	This can also be compiled as a module, which will be called
	appldata_os.o.

	config APPLDATA_NET_SUM
	tristate "Monitor overall network statistics"
	depends on APPLDATA_BASE
	help
	This provides network related data to the Linux - VM Monitor Stream,
	currently there is only a total sum of network I/O statistics, no
	per-interface data.
	Writing 1 or 0 to /proc/appldata/net_sum creates(1) or removes(0) a z/VM
	APPLDATA monitor record, i.e. enables or disables monitoring this record
	on the z/VM side.

	Default is disabled.
	This can also be compiled as a module, which will be called
	appldata_net_sum.o.

	config NO_IDLE_HZ
	bool "No HZ timer ticks in idle"
	help
	Switches the regular HZ timer off when the system is going idle.
	This helps z/VM to detect that the Linux system is idle. VM can
	then "swap-out" this guest which reduces memory usage. It also
	reduces the overhead of idle systems.

	The HZ timer can be switched on/off via /proc/sys/kernel/hz_timer.
	hz_timer=0 means HZ timer is disabled. hz_timer=1 means HZ
	timer is active.

	config NO_IDLE_HZ_INIT
	bool "HZ timer in idle off by default"
	depends on NO_IDLE_HZ
	help
	The HZ timer is switched off in idle by default. That means the
	HZ timer is already disabled at boot time.

	config S390_HYPFS_FS
	bool "s390 hypervisor file system support"
	select SYS_HYPERVISOR
	default y
	help
	This is a virtual file system intended to provide accounting
	information in an s390 hypervisor environment.

	config KEXEC
	bool "kexec system call (EXPERIMENTAL)"
	depends on EXPERIMENTAL
	help
	kexec is a system call that implements the ability to shutdown your
	current kernel, and to start another kernel. It is like a reboot
	but is independent of hardware/microcode support.

	endmenu

	source "net/Kconfig"

	config PCMCIA
	bool
	default n

	source "drivers/base/Kconfig"

	source "drivers/connector/Kconfig"

	source "drivers/scsi/Kconfig"

	source "drivers/s390/Kconfig"

	source "drivers/net/Kconfig"

	source "fs/Kconfig"

	source "arch/s390/oprofile/Kconfig"

	source "arch/s390/Kconfig.debug"

	source "security/Kconfig"

	source "crypto/Kconfig"

	source "lib/Kconfig"