/*
 * Greybus "AP" USB driver
 *
 * Copyright 2014 Google Inc.
 *
 * Released under the GPLv2 only.
 */
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/sizes.h>
#include <linux/usb.h>

#include "greybus.h"
#include "svc_msg.h"
#include "kernel_ver.h"

/* Memory sizes for the buffers sent to/from the ES1 controller */
#define ES1_SVC_MSG_SIZE	(sizeof(struct svc_msg) + SZ_64K)
#define ES1_GBUF_MSG_SIZE	PAGE_SIZE


static const struct usb_device_id id_table[] = {
	/* Made up numbers for the SVC USB Bridge in ES1 */
	{ USB_DEVICE(0xffff, 0x0001) },
	{ },
};
MODULE_DEVICE_TABLE(usb, id_table);

/*
 * Number of CPort IN urbs in flight at any point in time.
 * Adjust if we are having stalls in the USB buffer due to not enough urbs in
 * flight.
 */
#define NUM_CPORT_IN_URB	4

/* Number of CPort OUT urbs in flight at any point in time.
 * Adjust if we get messages saying we are out of urbs in the system log.
 */
#define NUM_CPORT_OUT_URB	8

/**
 * es1_ap_dev - ES1 USB Bridge to AP structure
 * @usb_dev: pointer to the USB device we are.
 * @usb_intf: pointer to the USB interface we are bound to.
 * @hd: pointer to our greybus_host_device structure
 * @control_endpoint: endpoint to send data to SVC
 * @svc_endpoint: endpoint for SVC data in
 * @cport_in_endpoint: bulk in endpoint for CPort data
 * @cport-out_endpoint: bulk out endpoint for CPort data
 * @svc_buffer: buffer for SVC messages coming in on @svc_endpoint
 * @svc_urb: urb for SVC messages coming in on @svc_endpoint
 * @cport_in_urb: array of urbs for the CPort in messages
 * @cport_in_buffer: array of buffers for the @cport_in_urb urbs
 * @cport_out_urb: array of urbs for the CPort out messages
 * @cport_out_urb_busy: array of flags to see if the @cport_out_urb is busy or
 *			not.
 * @cport_out_urb_lock: locks the @cport_out_urb_busy "list"
 */
struct es1_ap_dev {
	struct usb_device *usb_dev;
	struct usb_interface *usb_intf;
	struct greybus_host_device *hd;

	__u8 control_endpoint;
	__u8 svc_endpoint;
	__u8 cport_in_endpoint;
	__u8 cport_out_endpoint;

	u8 *svc_buffer;
	struct urb *svc_urb;

	struct urb *cport_in_urb[NUM_CPORT_IN_URB];
	u8 *cport_in_buffer[NUM_CPORT_IN_URB];
	struct urb *cport_out_urb[NUM_CPORT_OUT_URB];
	bool cport_out_urb_busy[NUM_CPORT_OUT_URB];
	spinlock_t cport_out_urb_lock;
};

static inline struct es1_ap_dev *hd_to_es1(struct greybus_host_device *hd)
{
	return (struct es1_ap_dev *)&hd->hd_priv;
}

static void cport_out_callback(struct urb *urb);

/*
 * Allocate the actual buffer for this gbuf and device and cport
 *
 * We are responsible for setting the following fields in a struct gbuf:
 *	void *hcpriv;
 *	void *transfer_buffer;
 *	u32 transfer_buffer_length;
 */
static int alloc_gbuf_data(struct gbuf *gbuf, unsigned int size,
				gfp_t gfp_mask)
{
	u32 cport_reserve = gbuf->dest_cport_id == CPORT_ID_BAD ? 0 : 1;
	u8 *buffer;

	if (size > ES1_GBUF_MSG_SIZE) {
		pr_err("guf was asked to be bigger than %ld!\n",
		       ES1_GBUF_MSG_SIZE);
	}

	/* For ES2 we need to figure out what cport is going to what endpoint,
	 * but for ES1, it's so dirt simple, we don't have a choice...
	 *
	 * Also, do a "slow" allocation now, if we need speed, use a cache
	 *
	 * For ES1 outbound buffers need to insert their target
	 * CPort Id before the data; set aside an extra byte for
	 * that purpose in that case.
	 */
	buffer = kzalloc(cport_reserve + size, gfp_mask);
	if (!buffer)
		return -ENOMEM;

	/* Insert the cport id for outbound buffers */
	if (cport_reserve) {
		if (gbuf->dest_cport_id > (u16)U8_MAX) {
			pr_err("gbuf->dest_cport_id (%hd) is out of range!\n",
				gbuf->dest_cport_id);
			kfree(buffer);
			return -EINVAL;
		}
		*buffer++ = gbuf->dest_cport_id;
	}
	gbuf->transfer_buffer = buffer;
	gbuf->transfer_buffer_length = size;

	return 0;
}

/* Free the memory we allocated with a gbuf */
static void free_gbuf_data(struct gbuf *gbuf)
{
	u8 *transfer_buffer = gbuf->transfer_buffer;

	/* Can be called with a NULL transfer_buffer on some error paths */
	if (!transfer_buffer)
		return;

	/* Account for the cport id in outbound buffers */
	if (gbuf->dest_cport_id != CPORT_ID_BAD)
		transfer_buffer--;	/* Back up to cport id */
	kfree(transfer_buffer);
}

#define ES1_TIMEOUT	500	/* 500 ms for the SVC to do something */
static int submit_svc(struct svc_msg *svc_msg, struct greybus_host_device *hd)
{
	struct es1_ap_dev *es1 = hd_to_es1(hd);
	int retval;

	/* SVC messages go down our control pipe */
	retval = usb_control_msg(es1->usb_dev,
				 usb_sndctrlpipe(es1->usb_dev,
						 es1->control_endpoint),
				 0x01,	/* vendor request AP message */
				 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
				 0x00, 0x00,
				 (char *)svc_msg,
				 sizeof(*svc_msg),
				 ES1_TIMEOUT);
	if (retval != sizeof(*svc_msg))
		return retval;

	return 0;
}

static struct urb *next_free_urb(struct es1_ap_dev *es1, gfp_t gfp_mask)
{
	struct urb *urb = NULL;
	unsigned long flags;
	int i;

	spin_lock_irqsave(&es1->cport_out_urb_lock, flags);

	/* Look in our pool of allocated urbs first, as that's the "fastest" */
	for (i = 0; i < NUM_CPORT_OUT_URB; ++i) {
		if (es1->cport_out_urb_busy[i] == false) {
			es1->cport_out_urb_busy[i] = true;
			urb = es1->cport_out_urb[i];
			break;
		}
	}
	spin_unlock_irqrestore(&es1->cport_out_urb_lock, flags);
	if (urb)
		return urb;

	/*
	 * Crap, pool is empty, complain to the syslog and go allocate one
	 * dynamically as we have to succeed.
	 */
	dev_err(&es1->usb_dev->dev,
		"No free CPort OUT urbs, having to dynamically allocate one!\n");
	urb = usb_alloc_urb(0, gfp_mask);
	if (!urb)
		return NULL;

	return urb;
}

static int submit_gbuf(struct gbuf *gbuf, gfp_t gfp_mask)
{
	struct greybus_host_device *hd = gbuf->operation->connection->hd;
	struct es1_ap_dev *es1 = hd_to_es1(hd);
	struct usb_device *udev = es1->usb_dev;
	int retval;
	u8 *transfer_buffer;
	u8 *buffer;
	struct urb *urb;

	transfer_buffer = gbuf->transfer_buffer;
	buffer = &transfer_buffer[-1];	/* yes, we mean -1 */

	/* Find a free urb */
	urb = next_free_urb(es1, gfp_mask);
	if (!urb)
		return -ENOMEM;

	gbuf->hcd_data = urb;

	usb_fill_bulk_urb(urb, udev,
			  usb_sndbulkpipe(udev, es1->cport_out_endpoint),
			  buffer, gbuf->transfer_buffer_length + 1,
			  cport_out_callback, gbuf);
	retval = usb_submit_urb(urb, gfp_mask);
	return retval;
}

static void kill_gbuf(struct gbuf *gbuf)
{
	struct urb *urb = gbuf->hcd_data;

	if (!urb)
		return;

	usb_kill_urb(urb);
}

static struct greybus_host_driver es1_driver = {
	.hd_priv_size		= sizeof(struct es1_ap_dev),
	.alloc_gbuf_data	= alloc_gbuf_data,
	.free_gbuf_data		= free_gbuf_data,
	.submit_svc		= submit_svc,
	.submit_gbuf		= submit_gbuf,
	.kill_gbuf		= kill_gbuf,
};

/* Common function to report consistent warnings based on URB status */
static int check_urb_status(struct urb *urb)
{
	struct device *dev = &urb->dev->dev;
	int status = urb->status;

	switch (status) {
	case 0:
		return 0;

	case -EOVERFLOW:
		dev_err(dev, "%s: overflow actual length is %d\n",
			__func__, urb->actual_length);
	case -ECONNRESET:
	case -ENOENT:
	case -ESHUTDOWN:
	case -EILSEQ:
	case -EPROTO:
		/* device is gone, stop sending */
		return status;
	}
	dev_err(dev, "%s: unknown status %d\n", __func__, status);

	return -EAGAIN;
}

static void ap_disconnect(struct usb_interface *interface)
{
	struct es1_ap_dev *es1;
	int i;

	es1 = usb_get_intfdata(interface);
	if (!es1)
		return;

	/* Tear down everything! */
	for (i = 0; i < NUM_CPORT_OUT_URB; ++i) {
		struct urb *urb = es1->cport_out_urb[i];

		if (!urb)
			break;
		usb_kill_urb(urb);
		usb_free_urb(urb);
		es1->cport_out_urb[i] = NULL;
		es1->cport_out_urb_busy[i] = false;	/* just to be anal */
	}

	for (i = 0; i < NUM_CPORT_IN_URB; ++i) {
		struct urb *urb = es1->cport_in_urb[i];

		if (!urb)
			break;
		usb_kill_urb(urb);
		usb_free_urb(urb);
		kfree(es1->cport_in_buffer[i]);
		es1->cport_in_buffer[i] = NULL;
	}

	usb_kill_urb(es1->svc_urb);
	usb_free_urb(es1->svc_urb);
	es1->svc_urb = NULL;
	kfree(es1->svc_buffer);
	es1->svc_buffer = NULL;

	usb_set_intfdata(interface, NULL);
	greybus_remove_hd(es1->hd);

	usb_put_dev(es1->usb_dev);
}

/* Callback for when we get a SVC message */
static void svc_in_callback(struct urb *urb)
{
	struct es1_ap_dev *es1 = urb->context;
	struct device *dev = &urb->dev->dev;
	int status = check_urb_status(urb);
	int retval;

	if (status) {
		if (status == -EAGAIN)
			goto exit;
		dev_err(dev, "urb svc in error %d (dropped)\n", status);
		return;
	}

	/* We have a message, create a new message structure, add it to the
	 * list, and wake up our thread that will process the messages.
	 */
	greybus_svc_in(es1->hd, urb->transfer_buffer, urb->actual_length);

exit:
	/* resubmit the urb to get more messages */
	retval = usb_submit_urb(urb, GFP_ATOMIC);
	if (retval)
		dev_err(dev, "Can not submit urb for AP data: %d\n", retval);
}

static void cport_in_callback(struct urb *urb)
{
	struct device *dev = &urb->dev->dev;
	struct es1_ap_dev *es1 = urb->context;
	int status = check_urb_status(urb);
	int retval;
	u8 cport;
	u8 *data;

	if (status) {
		if (status == -EAGAIN)
			goto exit;
		dev_err(dev, "urb cport in error %d (dropped)\n", status);
		return;
	}

	/* The size has to be at least one, for the cport id */
	if (!urb->actual_length) {
		dev_err(dev, "%s: no cport id in input buffer?\n", __func__);
		goto exit;
	}

	/*
	 * The CPort number is the first byte of the data stream, the rest of
	 * the stream is "real" data
	 */
	data = urb->transfer_buffer;
	cport = data[0];
	data = &data[1];

	/* Pass this data to the greybus core */
	greybus_cport_in(es1->hd, cport, data, urb->actual_length - 1);

exit:
	/* put our urb back in the request pool */
	retval = usb_submit_urb(urb, GFP_ATOMIC);
	if (retval)
		dev_err(dev, "%s: error %d in submitting urb.\n",
			__func__, retval);
}

static void cport_out_callback(struct urb *urb)
{
	struct gbuf *gbuf = urb->context;
	struct es1_ap_dev *es1 = hd_to_es1(gbuf->operation->connection->hd);
	unsigned long flags;
	int i;

	/* Record whether the transfer was successful */
	gbuf->status = check_urb_status(urb);
	gbuf->hcd_data = NULL;

	/*
	 * See if this was an urb in our pool, if so mark it "free", otherwise
	 * we need to free it ourselves.
	 */
	spin_lock_irqsave(&es1->cport_out_urb_lock, flags);
	for (i = 0; i < NUM_CPORT_OUT_URB; ++i) {
		if (urb == es1->cport_out_urb[i]) {
			es1->cport_out_urb_busy[i] = false;
			urb = NULL;
			break;
		}
	}
	spin_unlock_irqrestore(&es1->cport_out_urb_lock, flags);

	/* If urb is not NULL, then we need to free this urb */
	usb_free_urb(urb);

	/*
	 * Yes, you are right, we aren't telling anyone that the urb finished.
	 * "That's crazy!  How does this all even work?" you might be saying.
	 * The "magic" is the idea that greybus works on the "operation" level,
	 * not the "send a buffer" level.  All operations are "round-trip" with
	 * a response from the device that the operation finished, or it will
	 * time out.  Because of that, we don't care that this urb finished, or
	 * failed, or did anything else, as higher levels of the protocol stack
	 * will handle completions and timeouts and the rest.
	 *
	 * This protocol is "needed" due to some hardware restrictions on the
	 * current generation of Unipro controllers.  Think about it for a
	 * minute, this is a USB driver, talking to a Unipro bridge, impediance
	 * mismatch is huge, yet the Unipro controller are even more
	 * underpowered than this little USB controller.  We rely on the round
	 * trip to keep stalls in the Unipro controllers from happening so that
	 * we can keep data flowing properly, no matter how slow it might be.
	 *
	 * Once again, a wonderful bus protocol cut down in its prime by a naive
	 * controller chip.  We dream of the day we have a "real" HCD for
	 * Unipro.  Until then, we suck it up and make the hardware work, as
	 * that's the job of the firmware and kernel.
	 * </rant>
	 */
}

/*
 * The ES1 USB Bridge device contains 4 endpoints
 * 1 Control - usual USB stuff + AP -> SVC messages
 * 1 Interrupt IN - SVC -> AP messages
 * 1 Bulk IN - CPort data in
 * 1 Bulk OUT - CPort data out
 */
static int ap_probe(struct usb_interface *interface,
		    const struct usb_device_id *id)
{
	struct es1_ap_dev *es1;
	struct greybus_host_device *hd;
	struct usb_device *udev;
	struct usb_host_interface *iface_desc;
	struct usb_endpoint_descriptor *endpoint;
	bool int_in_found = false;
	bool bulk_in_found = false;
	bool bulk_out_found = false;
	int retval = -ENOMEM;
	int i;
	u8 svc_interval = 0;

	udev = usb_get_dev(interface_to_usbdev(interface));

	hd = greybus_create_hd(&es1_driver, &udev->dev);
	if (!hd) {
		usb_put_dev(udev);
		return -ENOMEM;
	}

	es1 = hd_to_es1(hd);
	es1->hd = hd;
	es1->usb_intf = interface;
	es1->usb_dev = udev;
	spin_lock_init(&es1->cport_out_urb_lock);
	usb_set_intfdata(interface, es1);

	/* Control endpoint is the pipe to talk to this AP, so save it off */
	endpoint = &udev->ep0.desc;
	es1->control_endpoint = endpoint->bEndpointAddress;

	/* find all 3 of our endpoints */
	iface_desc = interface->cur_altsetting;
	for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
		endpoint = &iface_desc->endpoint[i].desc;

		if (usb_endpoint_is_int_in(endpoint)) {
			es1->svc_endpoint = endpoint->bEndpointAddress;
			svc_interval = endpoint->bInterval;
			int_in_found = true;
		} else if (usb_endpoint_is_bulk_in(endpoint)) {
			es1->cport_in_endpoint = endpoint->bEndpointAddress;
			bulk_in_found = true;
		} else if (usb_endpoint_is_bulk_out(endpoint)) {
			es1->cport_out_endpoint = endpoint->bEndpointAddress;
			bulk_out_found = true;
		} else {
			dev_err(&udev->dev,
				"Unknown endpoint type found, address %x\n",
				endpoint->bEndpointAddress);
		}
	}
	if ((int_in_found == false) ||
	    (bulk_in_found == false) ||
	    (bulk_out_found == false)) {
		dev_err(&udev->dev, "Not enough endpoints found in device, aborting!\n");
		goto error;
	}

	/* Create our buffer and URB to get SVC messages, and start it up */
	es1->svc_buffer = kmalloc(ES1_SVC_MSG_SIZE, GFP_KERNEL);
	if (!es1->svc_buffer)
		goto error;

	es1->svc_urb = usb_alloc_urb(0, GFP_KERNEL);
	if (!es1->svc_urb)
		goto error;

	usb_fill_int_urb(es1->svc_urb, udev,
			 usb_rcvintpipe(udev, es1->svc_endpoint),
			 es1->svc_buffer, ES1_SVC_MSG_SIZE, svc_in_callback,
			 es1, svc_interval);
	retval = usb_submit_urb(es1->svc_urb, GFP_KERNEL);
	if (retval)
		goto error;

	/* Allocate buffers for our cport in messages and start them up */
	for (i = 0; i < NUM_CPORT_IN_URB; ++i) {
		struct urb *urb;
		u8 *buffer;

		urb = usb_alloc_urb(0, GFP_KERNEL);
		if (!urb)
			goto error;
		buffer = kmalloc(ES1_GBUF_MSG_SIZE, GFP_KERNEL);
		if (!buffer)
			goto error;

		usb_fill_bulk_urb(urb, udev,
				  usb_rcvbulkpipe(udev, es1->cport_in_endpoint),
				  buffer, ES1_GBUF_MSG_SIZE, cport_in_callback,
				  es1);
		es1->cport_in_urb[i] = urb;
		es1->cport_in_buffer[i] = buffer;
		retval = usb_submit_urb(urb, GFP_KERNEL);
		if (retval)
			goto error;
	}

	/* Allocate urbs for our CPort OUT messages */
	for (i = 0; i < NUM_CPORT_OUT_URB; ++i) {
		struct urb *urb;

		urb = usb_alloc_urb(0, GFP_KERNEL);
		if (!urb)
			goto error;

		es1->cport_out_urb[i] = urb;
		es1->cport_out_urb_busy[i] = false;	/* just to be anal */
	}

	return 0;
error:
	ap_disconnect(interface);

	return retval;
}

static struct usb_driver es1_ap_driver = {
	.name =		"es1_ap_driver",
	.probe =	ap_probe,
	.disconnect =	ap_disconnect,
	.id_table =	id_table,
};

module_usb_driver(es1_ap_driver);

MODULE_LICENSE("GPL");
MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org>");