/*
 * Greybus driver and device API
 *
 * Copyright 2014 Google Inc.
 *
 * Released under the GPLv2 only.
 */

#ifndef __LINUX_GREYBUS_H
#define __LINUX_GREYBUS_H

#ifdef __KERNEL__

#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/list.h>
#include <linux/slab.h>
#include <linux/device.h>
#include <linux/module.h>
#include <linux/idr.h>

#include "kernel_ver.h"
#include "greybus_id.h"
#include "greybus_manifest.h"
#include "manifest.h"
#include "module.h"
#include "interface.h"
#include "connection.h"
#include "protocol.h"
#include "operation.h"


/* Matches up with the Greybus Protocol specification document */
#define GREYBUS_VERSION_MAJOR	0x00
#define GREYBUS_VERSION_MINOR	0x01

#define GREYBUS_DEVICE_ID_MATCH_DEVICE \
	(GREYBUS_DEVICE_ID_MATCH_VENDOR | GREYBUS_DEVICE_ID_MATCH_PRODUCT)

#define GREYBUS_DEVICE(v, p)					\
	.match_flags	= GREYBUS_DEVICE_ID_MATCH_DEVICE,	\
	.vendor		= (v),					\
	.product	= (p),

#define GREYBUS_DEVICE_SERIAL(s)				\
	.match_flags	= GREYBUS_DEVICE_ID_MATCH_SERIAL,	\
	.serial_number	= (s),

/* XXX I couldn't get my Kconfig file to be noticed for out-of-tree build */
#ifndef CONFIG_HOST_DEV_CPORT_ID_MAX
#define CONFIG_HOST_DEV_CPORT_ID_MAX 128
#endif /* !CONFIG_HOST_DEV_CPORT_ID_MAX */

/* Maximum number of CPorts usable by a host device */
/* XXX This should really be determined by the AP module manifest */
#define HOST_DEV_CPORT_ID_MAX	CONFIG_HOST_DEV_CPORT_ID_MAX
#define CPORT_ID_BAD		U16_MAX		/* UniPro max id is 4095 */

/*
  gbuf

  This is the "main" data structure to send / receive Greybus messages

  There are two different "views" of a gbuf structure:
    - a greybus driver
    - a greybus host controller

  A Greybus driver needs to worry about the following:
    - creating a gbuf
    - putting data into a gbuf
    - sending a gbuf to a device
    - receiving a gbuf from a device

  Creating a gbuf:
    A greybus driver calls greybus_alloc_gbuf()
  Putting data into a gbuf:
    copy data into gbuf->transfer_buffer
  Send a gbuf:
    A greybus driver calls greybus_submit_gbuf()
    The completion function in a gbuf will be called if the gbuf is successful
    or not.  That completion function runs in user context.  After the
    completion function is called, the gbuf must not be touched again as the
    greybus core "owns" it.  But, if a greybus driver wants to "hold on" to a
    gbuf after the completion function has been called, a reference must be
    grabbed on the gbuf with a call to greybus_get_gbuf().  When finished with
    the gbuf, call greybus_free_gbuf() and when the last reference count is
    dropped, it will be removed from the system.
  Receive a gbuf:
    A greybus driver calls gb_register_cport_complete() with a pointer to the
    callback function to be called for when a gbuf is received from a specific
    cport and device.  That callback will be made in user context with a gbuf
    when it is received.  To stop receiving messages, call
    gb_deregister_cport_complete() for a specific cport.


  Greybus Host controller drivers need to provide
    - a way to allocate the transfer buffer for a gbuf
    - a way to free the transfer buffer for a gbuf when it is "finished"
    - a way to submit gbuf for transmissions
    - notify the core the gbuf is complete
    - receive gbuf from the wire and submit them to the core
    - a way to send and receive svc messages
  Allocate a transfer buffer
    the host controller function alloc_gbuf_data is called
  Free a transfer buffer
    the host controller function free_gbuf_data is called
  Submit a gbuf to the hardware
    the host controller function submit_gbuf is called
  Notify the gbuf is complete
    the host controller driver must call greybus_gbuf_finished()
  Submit a SVC message to the hardware
    the host controller function send_svc_msg is called
  Receive gbuf messages
    the host controller driver must call greybus_cport_in() with the data
  Reveive SVC messages from the hardware
    The host controller driver must call greybus_svc_in


*/

struct gbuf {
	struct kref kref;

	struct gb_operation *operation;
	u16 dest_cport_id;		/* Destination CPort id */
	int status;

	void *transfer_buffer;
	u32 transfer_buffer_length;

	void *hcd_data;			/* for the HCD to track the gbuf */
};


/* For SP1 hardware, we are going to "hardcode" each device to have all logical
 * blocks in order to be able to address them as one unified "unit".  Then
 * higher up layers will then be able to talk to them as one logical block and
 * properly know how they are hooked together (i.e. which i2c port is on the
 * same module as the gpio pins, etc.)
 *
 * So, put the "private" data structures here in greybus.h and link to them off
 * of the "main" gb_module structure.
 */

struct greybus_host_device;
struct svc_msg;

/* Greybus "Host driver" structure, needed by a host controller driver to be
 * able to handle both SVC control as well as "real" greybus messages
 */
struct greybus_host_driver {
	size_t	hd_priv_size;

	int (*alloc_gbuf_data)(struct gbuf *gbuf, unsigned int size,
					gfp_t gfp_mask);
	void (*free_gbuf_data)(struct gbuf *gbuf);
	int (*submit_svc)(struct svc_msg *svc_msg,
			    struct greybus_host_device *hd);
	int (*submit_gbuf)(struct gbuf *gbuf, gfp_t gfp_mask);
	void (*kill_gbuf)(struct gbuf *gbuf);
};

struct greybus_host_device {
	struct kref kref;
	struct device *parent;
	const struct greybus_host_driver *driver;

	struct list_head modules;
	struct rb_root connections;
	struct ida cport_id_map;
	spinlock_t cport_id_map_lock;
	u8 device_id;

	/* Private data for the host driver */
	unsigned long hd_priv[0] __aligned(sizeof(s64));
};

struct greybus_host_device *greybus_create_hd(struct greybus_host_driver *hd,
					      struct device *parent);
void greybus_remove_hd(struct greybus_host_device *hd);
void greybus_cport_in(struct greybus_host_device *hd, u16 cport_id,
			u8 *data, size_t length);

struct gbuf *greybus_alloc_gbuf(struct gb_operation *operation,
				u16 dest_cport_id, unsigned int size,
				gfp_t gfp_mask);
void greybus_free_gbuf(struct gbuf *gbuf);
struct gbuf *greybus_get_gbuf(struct gbuf *gbuf);
#define greybus_put_gbuf	greybus_free_gbuf

int greybus_submit_gbuf(struct gbuf *gbuf, gfp_t mem_flags);
void greybus_kill_gbuf(struct gbuf *gbuf);


struct greybus_driver {
	const char *name;

	int (*probe)(struct gb_module *gmod,
		     const struct greybus_module_id *id);
	void (*disconnect)(struct gb_module *gmod);

	int (*suspend)(struct gb_module *gmod, pm_message_t message);
	int (*resume)(struct gb_module *gmod);

	const struct greybus_module_id *id_table;

	struct device_driver driver;
};
#define to_greybus_driver(d) container_of(d, struct greybus_driver, driver)

/* Don't call these directly, use the module_greybus_driver() macro instead */
int greybus_register_driver(struct greybus_driver *driver,
			    struct module *module, const char *mod_name);
void greybus_deregister(struct greybus_driver *driver);

/* define to get proper THIS_MODULE and KBUILD_MODNAME values */
#define greybus_register(driver) \
	greybus_register_driver(driver, THIS_MODULE, KBUILD_MODNAME)

/**
 * module_greybus_driver() - Helper macro for registering a Greybus driver
 * @__greybus_driver: greybus_driver structure
 *
 * Helper macro for Greybus drivers to set up proper module init / exit
 * functions.  Replaces module_init() and module_exit() and keeps people from
 * printing pointless things to the kernel log when their driver is loaded.
 */
#define module_greybus_driver(__greybus_driver)	\
	module_driver(__greybus_driver, greybus_register, greybus_deregister)

int greybus_disabled(void);

/* Internal functions to gb module, move to internal .h file eventually. */

void gb_add_module(struct greybus_host_device *hd, u8 module_id,
		   u8 *data, int size);
void gb_remove_module(struct greybus_host_device *hd, u8 module_id);
void gb_remove_modules(struct greybus_host_device *hd);

int greybus_svc_in(struct greybus_host_device *hd, u8 *data, int length);
int gb_ap_init(void);
void gb_ap_exit(void);
int gb_debugfs_init(void);
void gb_debugfs_cleanup(void);
int gb_gbuf_init(void);
void gb_gbuf_exit(void);

extern struct bus_type greybus_bus_type;
extern const struct attribute_group *greybus_module_groups[];

int gb_uart_device_init(struct gb_connection *connection);
void gb_uart_device_exit(struct gb_connection *connection);

int svc_set_route_send(struct gb_interface *interface,
			       struct greybus_host_device *hd);

extern struct device_type greybus_module_type;
extern struct device_type greybus_interface_type;
extern struct device_type greybus_connection_type;

static inline int is_gb_module(const struct device *dev)
{
	return dev->type == &greybus_module_type;
}

static inline int is_gb_interface(const struct device *dev)
{
	return dev->type == &greybus_interface_type;
}

static inline int is_gb_connection(const struct device *dev)
{
	return dev->type == &greybus_connection_type;
}

#endif /* __KERNEL__ */
#endif /* __LINUX_GREYBUS_H */