| /* |
| * AHCI SATA platform driver |
| * |
| * Copyright 2004-2005 Red Hat, Inc. |
| * Jeff Garzik <jgarzik@pobox.com> |
| * Copyright 2010 MontaVista Software, LLC. |
| * Anton Vorontsov <avorontsov@ru.mvista.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2, or (at your option) |
| * any later version. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/gfp.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/device.h> |
| #include <linux/platform_device.h> |
| #include <linux/libata.h> |
| #include <linux/ahci_platform.h> |
| #include "ahci.h" |
| |
| enum ahci_type { |
| AHCI, /* standard platform ahci */ |
| IMX53_AHCI, /* ahci on i.mx53 */ |
| }; |
| |
| static struct platform_device_id ahci_devtype[] = { |
| { |
| .name = "ahci", |
| .driver_data = AHCI, |
| }, { |
| .name = "imx53-ahci", |
| .driver_data = IMX53_AHCI, |
| }, { |
| /* sentinel */ |
| } |
| }; |
| MODULE_DEVICE_TABLE(platform, ahci_devtype); |
| |
| |
| static const struct ata_port_info ahci_port_info[] = { |
| /* by features */ |
| [AHCI] = { |
| .flags = AHCI_FLAG_COMMON, |
| .pio_mask = ATA_PIO4, |
| .udma_mask = ATA_UDMA6, |
| .port_ops = &ahci_ops, |
| }, |
| [IMX53_AHCI] = { |
| .flags = AHCI_FLAG_COMMON, |
| .pio_mask = ATA_PIO4, |
| .udma_mask = ATA_UDMA6, |
| .port_ops = &ahci_pmp_retry_srst_ops, |
| }, |
| }; |
| |
| static struct scsi_host_template ahci_platform_sht = { |
| AHCI_SHT("ahci_platform"), |
| }; |
| |
| static int __init ahci_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct ahci_platform_data *pdata = dev_get_platdata(dev); |
| const struct platform_device_id *id = platform_get_device_id(pdev); |
| struct ata_port_info pi = ahci_port_info[id ? id->driver_data : 0]; |
| const struct ata_port_info *ppi[] = { &pi, NULL }; |
| struct ahci_host_priv *hpriv; |
| struct ata_host *host; |
| struct resource *mem; |
| int irq; |
| int n_ports; |
| int i; |
| int rc; |
| |
| mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!mem) { |
| dev_err(dev, "no mmio space\n"); |
| return -EINVAL; |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq <= 0) { |
| dev_err(dev, "no irq\n"); |
| return -EINVAL; |
| } |
| |
| if (pdata && pdata->ata_port_info) |
| pi = *pdata->ata_port_info; |
| |
| hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); |
| if (!hpriv) { |
| dev_err(dev, "can't alloc ahci_host_priv\n"); |
| return -ENOMEM; |
| } |
| |
| hpriv->flags |= (unsigned long)pi.private_data; |
| |
| hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem)); |
| if (!hpriv->mmio) { |
| dev_err(dev, "can't map %pR\n", mem); |
| return -ENOMEM; |
| } |
| |
| /* |
| * Some platforms might need to prepare for mmio region access, |
| * which could be done in the following init call. So, the mmio |
| * region shouldn't be accessed before init (if provided) has |
| * returned successfully. |
| */ |
| if (pdata && pdata->init) { |
| rc = pdata->init(dev, hpriv->mmio); |
| if (rc) |
| return rc; |
| } |
| |
| ahci_save_initial_config(dev, hpriv, |
| pdata ? pdata->force_port_map : 0, |
| pdata ? pdata->mask_port_map : 0); |
| |
| /* prepare host */ |
| if (hpriv->cap & HOST_CAP_NCQ) |
| pi.flags |= ATA_FLAG_NCQ; |
| |
| if (hpriv->cap & HOST_CAP_PMP) |
| pi.flags |= ATA_FLAG_PMP; |
| |
| ahci_set_em_messages(hpriv, &pi); |
| |
| /* CAP.NP sometimes indicate the index of the last enabled |
| * port, at other times, that of the last possible port, so |
| * determining the maximum port number requires looking at |
| * both CAP.NP and port_map. |
| */ |
| n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map)); |
| |
| host = ata_host_alloc_pinfo(dev, ppi, n_ports); |
| if (!host) { |
| rc = -ENOMEM; |
| goto err0; |
| } |
| |
| host->private_data = hpriv; |
| |
| if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss) |
| host->flags |= ATA_HOST_PARALLEL_SCAN; |
| else |
| printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n"); |
| |
| if (pi.flags & ATA_FLAG_EM) |
| ahci_reset_em(host); |
| |
| for (i = 0; i < host->n_ports; i++) { |
| struct ata_port *ap = host->ports[i]; |
| |
| ata_port_desc(ap, "mmio %pR", mem); |
| ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80); |
| |
| /* set enclosure management message type */ |
| if (ap->flags & ATA_FLAG_EM) |
| ap->em_message_type = hpriv->em_msg_type; |
| |
| /* disabled/not-implemented port */ |
| if (!(hpriv->port_map & (1 << i))) |
| ap->ops = &ata_dummy_port_ops; |
| } |
| |
| rc = ahci_reset_controller(host); |
| if (rc) |
| goto err0; |
| |
| ahci_init_controller(host); |
| ahci_print_info(host, "platform"); |
| |
| rc = ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED, |
| &ahci_platform_sht); |
| if (rc) |
| goto err0; |
| |
| return 0; |
| err0: |
| if (pdata && pdata->exit) |
| pdata->exit(dev); |
| return rc; |
| } |
| |
| static int __devexit ahci_remove(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct ahci_platform_data *pdata = dev_get_platdata(dev); |
| struct ata_host *host = dev_get_drvdata(dev); |
| |
| ata_host_detach(host); |
| |
| if (pdata && pdata->exit) |
| pdata->exit(dev); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int ahci_suspend(struct device *dev) |
| { |
| struct ahci_platform_data *pdata = dev_get_platdata(dev); |
| struct ata_host *host = dev_get_drvdata(dev); |
| struct ahci_host_priv *hpriv = host->private_data; |
| void __iomem *mmio = hpriv->mmio; |
| u32 ctl; |
| int rc; |
| |
| if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) { |
| dev_err(dev, "firmware update required for suspend/resume\n"); |
| return -EIO; |
| } |
| |
| /* |
| * AHCI spec rev1.1 section 8.3.3: |
| * Software must disable interrupts prior to requesting a |
| * transition of the HBA to D3 state. |
| */ |
| ctl = readl(mmio + HOST_CTL); |
| ctl &= ~HOST_IRQ_EN; |
| writel(ctl, mmio + HOST_CTL); |
| readl(mmio + HOST_CTL); /* flush */ |
| |
| rc = ata_host_suspend(host, PMSG_SUSPEND); |
| if (rc) |
| return rc; |
| |
| if (pdata && pdata->suspend) |
| return pdata->suspend(dev); |
| return 0; |
| } |
| |
| static int ahci_resume(struct device *dev) |
| { |
| struct ahci_platform_data *pdata = dev_get_platdata(dev); |
| struct ata_host *host = dev_get_drvdata(dev); |
| int rc; |
| |
| if (pdata && pdata->resume) { |
| rc = pdata->resume(dev); |
| if (rc) |
| return rc; |
| } |
| |
| if (dev->power.power_state.event == PM_EVENT_SUSPEND) { |
| rc = ahci_reset_controller(host); |
| if (rc) |
| return rc; |
| |
| ahci_init_controller(host); |
| } |
| |
| ata_host_resume(host); |
| |
| return 0; |
| } |
| |
| static struct dev_pm_ops ahci_pm_ops = { |
| .suspend = &ahci_suspend, |
| .resume = &ahci_resume, |
| }; |
| #endif |
| |
| static const struct of_device_id ahci_of_match[] = { |
| { .compatible = "calxeda,hb-ahci", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, ahci_of_match); |
| |
| static struct platform_driver ahci_driver = { |
| .remove = __devexit_p(ahci_remove), |
| .driver = { |
| .name = "ahci", |
| .owner = THIS_MODULE, |
| .of_match_table = ahci_of_match, |
| #ifdef CONFIG_PM |
| .pm = &ahci_pm_ops, |
| #endif |
| }, |
| .id_table = ahci_devtype, |
| }; |
| |
| static int __init ahci_init(void) |
| { |
| return platform_driver_probe(&ahci_driver, ahci_probe); |
| } |
| module_init(ahci_init); |
| |
| static void __exit ahci_exit(void) |
| { |
| platform_driver_unregister(&ahci_driver); |
| } |
| module_exit(ahci_exit); |
| |
| MODULE_DESCRIPTION("AHCI SATA platform driver"); |
| MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:ahci"); |