| # |
| # HID driver configuration |
| # |
| menuconfig HID_SUPPORT |
| bool "HID Devices" |
| depends on INPUT |
| default y |
| ---help--- |
| Say Y here to get to see options for various computer-human interface |
| device drivers. This option alone does not add any kernel code. |
| |
| If you say N, all options in this submenu will be skipped and disabled. |
| |
| if HID_SUPPORT |
| |
| config HID |
| tristate "Generic HID support" |
| depends on INPUT |
| default y |
| ---help--- |
| A human interface device (HID) is a type of computer device that |
| interacts directly with and takes input from humans. The term "HID" |
| most commonly used to refer to the USB-HID specification, but other |
| devices (such as, but not strictly limited to, Bluetooth) are |
| designed using HID specification (this involves certain keyboards, |
| mice, tablets, etc). This option compiles into kernel the generic |
| HID layer code (parser, usages, etc.), which can then be used by |
| transport-specific HID implementation (like USB or Bluetooth). |
| |
| For docs and specs, see http://www.usb.org/developers/hidpage/ |
| |
| If unsure, say Y. |
| |
| config HID_BATTERY_STRENGTH |
| bool |
| depends on HID && POWER_SUPPLY && HID = POWER_SUPPLY |
| default y |
| |
| config HIDRAW |
| bool "/dev/hidraw raw HID device support" |
| depends on HID |
| ---help--- |
| Say Y here if you want to support HID devices (from the USB |
| specification standpoint) that aren't strictly user interface |
| devices, like monitor controls and Uninterruptable Power Supplies. |
| |
| This module supports these devices separately using a separate |
| event interface on /dev/hidraw. |
| |
| There is also a /dev/hiddev configuration option in the USB HID |
| configuration menu. In comparison to hiddev, this device does not process |
| the hid events at all (no parsing, no lookups). This lets applications |
| to work on raw hid events when they want to, and avoid using transport-specific |
| userspace libhid/libusb libraries. |
| |
| If unsure, say Y. |
| |
| source "drivers/hid/usbhid/Kconfig" |
| |
| menu "Special HID drivers" |
| depends on HID |
| |
| config HID_A4TECH |
| tristate "A4 tech mice" if EXPERT |
| depends on USB_HID |
| default !EXPERT |
| ---help--- |
| Support for A4 tech X5 and WOP-35 / Trust 450L mice. |
| |
| config HID_ACRUX |
| tristate "ACRUX game controller support" |
| depends on USB_HID |
| ---help--- |
| Say Y here if you want to enable support for ACRUX game controllers. |
| |
| config HID_ACRUX_FF |
| bool "ACRUX force feedback support" |
| depends on HID_ACRUX |
| select INPUT_FF_MEMLESS |
| ---help--- |
| Say Y here if you want to enable force feedback support for ACRUX |
| game controllers. |
| |
| config HID_APPLE |
| tristate "Apple {i,Power,Mac}Books" if EXPERT |
| depends on (USB_HID || BT_HIDP) |
| default !EXPERT |
| ---help--- |
| Support for some Apple devices which less or more break |
| HID specification. |
| |
| Say Y here if you want support for keyboards of Apple iBooks, PowerBooks, |
| MacBooks, MacBook Pros and Apple Aluminum. |
| |
| config HID_BELKIN |
| tristate "Belkin Flip KVM and Wireless keyboard" if EXPERT |
| depends on USB_HID |
| default !EXPERT |
| ---help--- |
| Support for Belkin Flip KVM and Wireless keyboard. |
| |
| config HID_CHERRY |
| tristate "Cherry Cymotion keyboard" if EXPERT |
| depends on USB_HID |
| default !EXPERT |
| ---help--- |
| Support for Cherry Cymotion keyboard. |
| |
| config HID_CHICONY |
| tristate "Chicony Tactical pad" if EXPERT |
| depends on USB_HID |
| default !EXPERT |
| ---help--- |
| Support for Chicony Tactical pad. |
| |
| config HID_PRODIKEYS |
| tristate "Prodikeys PC-MIDI Keyboard support" |
| depends on USB_HID && SND |
| select SND_RAWMIDI |
| ---help--- |
| Support for Prodikeys PC-MIDI Keyboard device support. |
| Say Y here to enable support for this device. |
| - Prodikeys PC-MIDI keyboard. |
| The Prodikeys PC-MIDI acts as a USB Audio device, with one MIDI |
| input and one MIDI output. These MIDI jacks appear as |
| a sound "card" in the ALSA sound system. |
| Note: if you say N here, this device will still function as a basic |
| multimedia keyboard, but will lack support for the musical keyboard |
| and some additional multimedia keys. |
| |
| config HID_CYPRESS |
| tristate "Cypress mouse and barcode readers" if EXPERT |
| depends on USB_HID |
| default !EXPERT |
| ---help--- |
| Support for cypress mouse and barcode readers. |
| |
| config HID_DRAGONRISE |
| tristate "DragonRise Inc. game controller" |
| depends on USB_HID |
| ---help--- |
| Say Y here if you have DragonRise Inc. game controllers. |
| These might be branded as: |
| - Tesun USB-703 |
| - Media-tech MT1504 "Rogue" |
| - DVTech JS19 "Gear" |
| - Defender Game Master |
| |
| config DRAGONRISE_FF |
| bool "DragonRise Inc. force feedback" |
| depends on HID_DRAGONRISE |
| select INPUT_FF_MEMLESS |
| ---help--- |
| Say Y here if you want to enable force feedback support for DragonRise Inc. |
| game controllers. |
| |
| config HID_EMS_FF |
| tristate "EMS Production Inc. force feedback support" |
| depends on USB_HID |
| select INPUT_FF_MEMLESS |
| ---help--- |
| Say Y here if you want to enable force feedback support for devices by |
| EMS Production Ltd. |
| Currently the following devices are known to be supported: |
| - Trio Linker Plus II |
| |
| config HID_ELECOM |
| tristate "ELECOM BM084 bluetooth mouse" |
| depends on BT_HIDP |
| ---help--- |
| Support for the ELECOM BM084 (bluetooth mouse). |
| |
| config HID_EZKEY |
| tristate "Ezkey BTC 8193 keyboard" if EXPERT |
| depends on USB_HID |
| default !EXPERT |
| ---help--- |
| Support for Ezkey BTC 8193 keyboard. |
| |
| config HID_HOLTEK |
| tristate "Holtek On Line Grip based game controller support" |
| depends on USB_HID |
| ---help--- |
| Say Y here if you have a Holtek On Line Grip based game controller. |
| |
| config HOLTEK_FF |
| bool "Holtek On Line Grip force feedback support" |
| depends on HID_HOLTEK |
| select INPUT_FF_MEMLESS |
| ---help--- |
| Say Y here if you have a Holtek On Line Grip based game controller |
| and want to have force feedback support for it. |
| |
| config HID_KEYTOUCH |
| tristate "Keytouch HID devices" |
| depends on USB_HID |
| ---help--- |
| Support for Keytouch HID devices not fully compliant with |
| the specification. Currently supported: |
| - Keytouch IEC 60945 |
| |
| config HID_KYE |
| tristate "KYE/Genius devices" |
| depends on USB_HID |
| ---help--- |
| Support for KYE/Genius devices not fully compliant with HID standard: |
| - Ergo Mouse |
| - EasyPen i405X tablet |
| - MousePen i608X tablet |
| - EasyPen M610X tablet |
| |
| config HID_UCLOGIC |
| tristate "UC-Logic" |
| depends on USB_HID |
| ---help--- |
| Support for UC-Logic tablets. |
| |
| config HID_WALTOP |
| tristate "Waltop" |
| depends on USB_HID |
| ---help--- |
| Support for Waltop tablets. |
| |
| config HID_GYRATION |
| tristate "Gyration remote control" |
| depends on USB_HID |
| ---help--- |
| Support for Gyration remote control. |
| |
| config HID_TWINHAN |
| tristate "Twinhan IR remote control" |
| depends on USB_HID |
| ---help--- |
| Support for Twinhan IR remote control. |
| |
| config HID_KENSINGTON |
| tristate "Kensington Slimblade Trackball" if EXPERT |
| depends on USB_HID |
| default !EXPERT |
| ---help--- |
| Support for Kensington Slimblade Trackball. |
| |
| config HID_LCPOWER |
| tristate "LC-Power" |
| depends on USB_HID |
| ---help--- |
| Support for LC-Power RC1000MCE RF remote control. |
| |
| config HID_LOGITECH |
| tristate "Logitech devices" if EXPERT |
| depends on USB_HID |
| default !EXPERT |
| ---help--- |
| Support for Logitech devices that are not fully compliant with HID standard. |
| |
| config HID_LOGITECH_DJ |
| tristate "Logitech Unifying receivers full support" |
| depends on HID_LOGITECH |
| default m |
| ---help--- |
| Say Y if you want support for Logitech Unifying receivers and devices. |
| Unifying receivers are capable of pairing up to 6 Logitech compliant |
| devices to the same receiver. Without this driver it will be handled by |
| generic USB_HID driver and all incomming events will be multiplexed |
| into a single mouse and a single keyboard device. |
| |
| config LOGITECH_FF |
| bool "Logitech force feedback support" |
| depends on HID_LOGITECH |
| select INPUT_FF_MEMLESS |
| help |
| Say Y here if you have one of these devices: |
| - Logitech WingMan Cordless RumblePad |
| - Logitech WingMan Cordless RumblePad 2 |
| - Logitech WingMan Force 3D |
| - Logitech Formula Force EX |
| - Logitech WingMan Formula Force GP |
| - Logitech MOMO Force wheel |
| |
| and if you want to enable force feedback for them. |
| Note: if you say N here, this device will still be supported, but without |
| force feedback. |
| |
| config LOGIRUMBLEPAD2_FF |
| bool "Logitech RumblePad/Rumblepad 2 force feedback support" |
| depends on HID_LOGITECH |
| select INPUT_FF_MEMLESS |
| help |
| Say Y here if you want to enable force feedback support for Logitech |
| RumblePad and Rumblepad 2 devices. |
| |
| config LOGIG940_FF |
| bool "Logitech Flight System G940 force feedback support" |
| depends on HID_LOGITECH |
| select INPUT_FF_MEMLESS |
| help |
| Say Y here if you want to enable force feedback support for Logitech |
| Flight System G940 devices. |
| |
| config LOGIWHEELS_FF |
| bool "Logitech wheels configuration and force feedback support" |
| depends on HID_LOGITECH |
| select INPUT_FF_MEMLESS |
| default LOGITECH_FF |
| help |
| Say Y here if you want to enable force feedback and range setting |
| support for following Logitech wheels: |
| - Logitech Driving Force |
| - Logitech Driving Force Pro |
| - Logitech Driving Force GT |
| - Logitech G25 |
| - Logitech G27 |
| - Logitech MOMO/MOMO 2 |
| - Logitech Formula Force EX |
| |
| config HID_MAGICMOUSE |
| tristate "Apple MagicMouse multi-touch support" |
| depends on BT_HIDP |
| ---help--- |
| Support for the Apple Magic Mouse multi-touch. |
| |
| Say Y here if you want support for the multi-touch features of the |
| Apple Wireless "Magic" Mouse. |
| |
| config HID_MICROSOFT |
| tristate "Microsoft non-fully HID-compliant devices" if EXPERT |
| depends on USB_HID |
| default !EXPERT |
| ---help--- |
| Support for Microsoft devices that are not fully compliant with HID standard. |
| |
| config HID_MONTEREY |
| tristate "Monterey Genius KB29E keyboard" if EXPERT |
| depends on USB_HID |
| default !EXPERT |
| ---help--- |
| Support for Monterey Genius KB29E. |
| |
| config HID_MULTITOUCH |
| tristate "HID Multitouch panels" |
| depends on USB_HID |
| ---help--- |
| Generic support for HID multitouch panels. |
| |
| Say Y here if you have one of the following devices: |
| - 3M PCT touch screens |
| - ActionStar dual touch panels |
| - Atmel panels |
| - Cando dual touch panels |
| - Chunghwa panels |
| - CVTouch panels |
| - Cypress TrueTouch panels |
| - Elo TouchSystems IntelliTouch Plus panels |
| - GeneralTouch 'Sensing Win7-TwoFinger' panels |
| - GoodTouch panels |
| - Hanvon dual touch panels |
| - Ilitek dual touch panels |
| - IrTouch Infrared USB panels |
| - LG Display panels (Dell ST2220Tc) |
| - Lumio CrystalTouch panels |
| - MosArt dual-touch panels |
| - Panasonic multitouch panels |
| - PenMount dual touch panels |
| - Perixx Peripad 701 touchpad |
| - PixArt optical touch screen |
| - Pixcir dual touch panels |
| - Quanta panels |
| - eGalax dual-touch panels, including the Joojoo and Wetab tablets |
| - Stantum multitouch panels |
| - Touch International Panels |
| - Unitec Panels |
| - XAT optical touch panels |
| - Xiroku optical touch panels |
| |
| If unsure, say N. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called hid-multitouch. |
| |
| config HID_NTRIG |
| tristate "N-Trig touch screen" |
| depends on USB_HID |
| ---help--- |
| Support for N-Trig touch screen. |
| |
| config HID_ORTEK |
| tristate "Ortek PKB-1700/WKB-2000/Skycable wireless keyboard and mouse trackpad" |
| depends on USB_HID |
| ---help--- |
| There are certain devices which have LogicalMaximum wrong in the keyboard |
| usage page of their report descriptor. The most prevailing ones so far |
| are manufactured by Ortek, thus the name of the driver. Currently |
| supported devices by this driver are |
| |
| - Ortek PKB-1700 |
| - Ortek WKB-2000 |
| - Skycable wireless presenter |
| |
| config HID_PANTHERLORD |
| tristate "Pantherlord/GreenAsia game controller" |
| depends on USB_HID |
| ---help--- |
| Say Y here if you have a PantherLord/GreenAsia based game controller |
| or adapter. |
| |
| config PANTHERLORD_FF |
| bool "Pantherlord force feedback support" |
| depends on HID_PANTHERLORD |
| select INPUT_FF_MEMLESS |
| ---help--- |
| Say Y here if you have a PantherLord/GreenAsia based game controller |
| or adapter and want to enable force feedback support for it. |
| |
| config HID_PETALYNX |
| tristate "Petalynx Maxter remote control" |
| depends on USB_HID |
| ---help--- |
| Support for Petalynx Maxter remote control. |
| |
| config HID_PICOLCD |
| tristate "PicoLCD (graphic version)" |
| depends on USB_HID |
| ---help--- |
| This provides support for Minibox PicoLCD devices, currently |
| only the graphical ones are supported. |
| |
| This includes support for the following device features: |
| - Keypad |
| - Switching between Firmware and Flash mode |
| - EEProm / Flash access (via debugfs) |
| Features selectively enabled: |
| - Framebuffer for monochrome 256x64 display |
| - Backlight control |
| - Contrast control |
| - General purpose outputs |
| Features that are not (yet) supported: |
| - IR |
| |
| config HID_PICOLCD_FB |
| bool "Framebuffer support" if EXPERT |
| default !EXPERT |
| depends on HID_PICOLCD |
| depends on HID_PICOLCD=FB || FB=y |
| select FB_DEFERRED_IO |
| select FB_SYS_FILLRECT |
| select FB_SYS_COPYAREA |
| select FB_SYS_IMAGEBLIT |
| select FB_SYS_FOPS |
| ---help--- |
| Provide access to PicoLCD's 256x64 monochrome display via a |
| framebuffer device. |
| |
| config HID_PICOLCD_BACKLIGHT |
| bool "Backlight control" if EXPERT |
| default !EXPERT |
| depends on HID_PICOLCD |
| depends on HID_PICOLCD=BACKLIGHT_CLASS_DEVICE || BACKLIGHT_CLASS_DEVICE=y |
| ---help--- |
| Provide access to PicoLCD's backlight control via backlight |
| class. |
| |
| config HID_PICOLCD_LCD |
| bool "Contrast control" if EXPERT |
| default !EXPERT |
| depends on HID_PICOLCD |
| depends on HID_PICOLCD=LCD_CLASS_DEVICE || LCD_CLASS_DEVICE=y |
| ---help--- |
| Provide access to PicoLCD's LCD contrast via lcd class. |
| |
| config HID_PICOLCD_LEDS |
| bool "GPO via leds class" if EXPERT |
| default !EXPERT |
| depends on HID_PICOLCD |
| depends on HID_PICOLCD=LEDS_CLASS || LEDS_CLASS=y |
| ---help--- |
| Provide access to PicoLCD's GPO pins via leds class. |
| |
| config HID_PRIMAX |
| tristate "Primax non-fully HID-compliant devices" |
| depends on USB_HID |
| ---help--- |
| Support for Primax devices that are not fully compliant with the |
| HID standard. |
| |
| config HID_ROCCAT |
| tristate "Roccat device support" |
| depends on USB_HID |
| ---help--- |
| Support for Roccat devices. |
| Say Y here if you have a Roccat mouse or keyboard and want |
| support for its special functionalities. |
| |
| config HID_SAITEK |
| tristate "Saitek non-fully HID-compliant devices" |
| depends on USB_HID |
| ---help--- |
| Support for Saitek devices that are not fully compliant with the |
| HID standard. |
| |
| Currently only supports the PS1000 controller. |
| |
| config HID_SAMSUNG |
| tristate "Samsung InfraRed remote control or keyboards" |
| depends on USB_HID |
| ---help--- |
| Support for Samsung InfraRed remote control or keyboards. |
| |
| config HID_SONY |
| tristate "Sony PS3 controller" |
| depends on USB_HID |
| ---help--- |
| Support for Sony PS3 controller. |
| |
| config HID_SPEEDLINK |
| tristate "Speedlink VAD Cezanne mouse support" |
| depends on USB_HID |
| ---help--- |
| Support for Speedlink Vicious and Divine Cezanne mouse. |
| |
| config HID_SUNPLUS |
| tristate "Sunplus wireless desktop" |
| depends on USB_HID |
| ---help--- |
| Support for Sunplus wireless desktop. |
| |
| config HID_GREENASIA |
| tristate "GreenAsia (Product ID 0x12) game controller support" |
| depends on USB_HID |
| ---help--- |
| Say Y here if you have a GreenAsia (Product ID 0x12) based game |
| controller or adapter. |
| |
| config GREENASIA_FF |
| bool "GreenAsia (Product ID 0x12) force feedback support" |
| depends on HID_GREENASIA |
| select INPUT_FF_MEMLESS |
| ---help--- |
| Say Y here if you have a GreenAsia (Product ID 0x12) based game controller |
| (like MANTA Warrior MM816 and SpeedLink Strike2 SL-6635) or adapter |
| and want to enable force feedback support for it. |
| |
| config HID_HYPERV_MOUSE |
| tristate "Microsoft Hyper-V mouse driver" |
| depends on HYPERV |
| ---help--- |
| Select this option to enable the Hyper-V mouse driver. |
| |
| config HID_SMARTJOYPLUS |
| tristate "SmartJoy PLUS PS2/USB adapter support" |
| depends on USB_HID |
| ---help--- |
| Support for SmartJoy PLUS PS2/USB adapter, Super Dual Box, |
| Super Joy Box 3 Pro, Super Dual Box Pro, and Super Joy Box 5 Pro. |
| |
| Note that DDR (Dance Dance Revolution) mode is not supported, nor |
| is pressure sensitive buttons on the pro models. |
| |
| config SMARTJOYPLUS_FF |
| bool "SmartJoy PLUS PS2/USB adapter force feedback support" |
| depends on HID_SMARTJOYPLUS |
| select INPUT_FF_MEMLESS |
| ---help--- |
| Say Y here if you have a SmartJoy PLUS PS2/USB adapter and want to |
| enable force feedback support for it. |
| |
| config HID_TIVO |
| tristate "TiVo Slide Bluetooth remote control support" |
| depends on (USB_HID || BT_HIDP) |
| ---help--- |
| Say Y if you have a TiVo Slide Bluetooth remote control. |
| |
| config HID_TOPSEED |
| tristate "TopSeed Cyberlink, BTC Emprex, Conceptronic remote control support" |
| depends on USB_HID |
| ---help--- |
| Say Y if you have a TopSeed Cyberlink or BTC Emprex or Conceptronic |
| CLLRCMCE remote control. |
| |
| config HID_THRUSTMASTER |
| tristate "ThrustMaster devices support" |
| depends on USB_HID |
| ---help--- |
| Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or |
| a THRUSTMASTER Ferrari GT Rumble Wheel. |
| |
| config THRUSTMASTER_FF |
| bool "ThrustMaster devices force feedback support" |
| depends on HID_THRUSTMASTER |
| select INPUT_FF_MEMLESS |
| ---help--- |
| Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or 3, |
| a THRUSTMASTER Dual Trigger 3-in-1 or a THRUSTMASTER Ferrari GT |
| Rumble Force or Force Feedback Wheel. |
| |
| config HID_WACOM |
| tristate "Wacom Bluetooth devices support" |
| depends on BT_HIDP |
| ---help--- |
| Support for Wacom Graphire Bluetooth tablet. |
| |
| config HID_WACOM_POWER_SUPPLY |
| bool "Wacom Bluetooth devices power supply status support" |
| depends on HID_WACOM |
| select POWER_SUPPLY |
| ---help--- |
| Say Y here if you want to enable power supply status monitoring for |
| Wacom Bluetooth devices. |
| |
| config HID_WIIMOTE |
| tristate "Nintendo Wii Remote support" |
| depends on BT_HIDP |
| depends on LEDS_CLASS |
| select POWER_SUPPLY |
| select INPUT_FF_MEMLESS |
| ---help--- |
| Support for the Nintendo Wii Remote bluetooth device. |
| |
| config HID_WIIMOTE_EXT |
| bool "Nintendo Wii Remote Extension support" |
| depends on HID_WIIMOTE |
| default HID_WIIMOTE |
| ---help--- |
| Support for extension controllers of the Nintendo Wii Remote. Say yes |
| here if you want to use the Nintendo Motion+, Nunchuck or Classic |
| extension controllers with your Wii Remote. |
| |
| config HID_ZEROPLUS |
| tristate "Zeroplus based game controller support" |
| depends on USB_HID |
| ---help--- |
| Say Y here if you have a Zeroplus based game controller. |
| |
| config ZEROPLUS_FF |
| bool "Zeroplus based game controller force feedback support" |
| depends on HID_ZEROPLUS |
| select INPUT_FF_MEMLESS |
| ---help--- |
| Say Y here if you have a Zeroplus based game controller and want |
| to have force feedback support for it. |
| |
| config HID_ZYDACRON |
| tristate "Zydacron remote control support" |
| depends on USB_HID |
| ---help--- |
| Support for Zydacron remote control. |
| |
| endmenu |
| |
| endif # HID_SUPPORT |