| /* |
| * Intel Low Power Subsystem PWM controller driver |
| * |
| * Copyright (C) 2014, Intel Corporation |
| * Author: Mika Westerberg <mika.westerberg@linux.intel.com> |
| * Author: Chew Kean Ho <kean.ho.chew@intel.com> |
| * Author: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com> |
| * Author: Chew Chiau Ee <chiau.ee.chew@intel.com> |
| * Author: Alan Cox <alan@linux.intel.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/time.h> |
| |
| #include "pwm-lpss.h" |
| |
| #define PWM 0x00000000 |
| #define PWM_ENABLE BIT(31) |
| #define PWM_SW_UPDATE BIT(30) |
| #define PWM_BASE_UNIT_SHIFT 8 |
| #define PWM_ON_TIME_DIV_MASK 0x000000ff |
| |
| /* Size of each PWM register space if multiple */ |
| #define PWM_SIZE 0x400 |
| |
| #define MAX_PWMS 4 |
| |
| struct pwm_lpss_chip { |
| struct pwm_chip chip; |
| void __iomem *regs; |
| const struct pwm_lpss_boardinfo *info; |
| u32 saved_ctrl[MAX_PWMS]; |
| }; |
| |
| /* BayTrail */ |
| const struct pwm_lpss_boardinfo pwm_lpss_byt_info = { |
| .clk_rate = 25000000, |
| .npwm = 1, |
| .base_unit_bits = 16, |
| }; |
| EXPORT_SYMBOL_GPL(pwm_lpss_byt_info); |
| |
| /* Braswell */ |
| const struct pwm_lpss_boardinfo pwm_lpss_bsw_info = { |
| .clk_rate = 19200000, |
| .npwm = 1, |
| .base_unit_bits = 16, |
| }; |
| EXPORT_SYMBOL_GPL(pwm_lpss_bsw_info); |
| |
| /* Broxton */ |
| const struct pwm_lpss_boardinfo pwm_lpss_bxt_info = { |
| .clk_rate = 19200000, |
| .npwm = 4, |
| .base_unit_bits = 22, |
| }; |
| EXPORT_SYMBOL_GPL(pwm_lpss_bxt_info); |
| |
| static inline struct pwm_lpss_chip *to_lpwm(struct pwm_chip *chip) |
| { |
| return container_of(chip, struct pwm_lpss_chip, chip); |
| } |
| |
| static inline u32 pwm_lpss_read(const struct pwm_device *pwm) |
| { |
| struct pwm_lpss_chip *lpwm = to_lpwm(pwm->chip); |
| |
| return readl(lpwm->regs + pwm->hwpwm * PWM_SIZE + PWM); |
| } |
| |
| static inline void pwm_lpss_write(const struct pwm_device *pwm, u32 value) |
| { |
| struct pwm_lpss_chip *lpwm = to_lpwm(pwm->chip); |
| |
| writel(value, lpwm->regs + pwm->hwpwm * PWM_SIZE + PWM); |
| } |
| |
| static void pwm_lpss_update(struct pwm_device *pwm) |
| { |
| pwm_lpss_write(pwm, pwm_lpss_read(pwm) | PWM_SW_UPDATE); |
| /* Give it some time to propagate */ |
| usleep_range(10, 50); |
| } |
| |
| static int pwm_lpss_config(struct pwm_chip *chip, struct pwm_device *pwm, |
| int duty_ns, int period_ns) |
| { |
| struct pwm_lpss_chip *lpwm = to_lpwm(chip); |
| unsigned long long on_time_div; |
| unsigned long c = lpwm->info->clk_rate, base_unit_range; |
| unsigned long long base_unit, freq = NSEC_PER_SEC; |
| u32 ctrl; |
| |
| do_div(freq, period_ns); |
| |
| /* |
| * The equation is: |
| * base_unit = round(base_unit_range * freq / c) |
| */ |
| base_unit_range = BIT(lpwm->info->base_unit_bits); |
| freq *= base_unit_range; |
| |
| base_unit = DIV_ROUND_CLOSEST_ULL(freq, c); |
| |
| if (duty_ns <= 0) |
| duty_ns = 1; |
| on_time_div = 255ULL * duty_ns; |
| do_div(on_time_div, period_ns); |
| on_time_div = 255ULL - on_time_div; |
| |
| pm_runtime_get_sync(chip->dev); |
| |
| ctrl = pwm_lpss_read(pwm); |
| ctrl &= ~PWM_ON_TIME_DIV_MASK; |
| ctrl &= ~((base_unit_range - 1) << PWM_BASE_UNIT_SHIFT); |
| base_unit &= (base_unit_range - 1); |
| ctrl |= (u32) base_unit << PWM_BASE_UNIT_SHIFT; |
| ctrl |= on_time_div; |
| pwm_lpss_write(pwm, ctrl); |
| |
| /* |
| * If the PWM is already enabled we need to notify the hardware |
| * about the change by setting PWM_SW_UPDATE. |
| */ |
| if (pwm_is_enabled(pwm)) |
| pwm_lpss_update(pwm); |
| |
| pm_runtime_put(chip->dev); |
| |
| return 0; |
| } |
| |
| static int pwm_lpss_enable(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| pm_runtime_get_sync(chip->dev); |
| |
| /* |
| * Hardware must first see PWM_SW_UPDATE before the PWM can be |
| * enabled. |
| */ |
| pwm_lpss_update(pwm); |
| pwm_lpss_write(pwm, pwm_lpss_read(pwm) | PWM_ENABLE); |
| return 0; |
| } |
| |
| static void pwm_lpss_disable(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| pwm_lpss_write(pwm, pwm_lpss_read(pwm) & ~PWM_ENABLE); |
| pm_runtime_put(chip->dev); |
| } |
| |
| static const struct pwm_ops pwm_lpss_ops = { |
| .config = pwm_lpss_config, |
| .enable = pwm_lpss_enable, |
| .disable = pwm_lpss_disable, |
| .owner = THIS_MODULE, |
| }; |
| |
| struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev, struct resource *r, |
| const struct pwm_lpss_boardinfo *info) |
| { |
| struct pwm_lpss_chip *lpwm; |
| unsigned long c; |
| int ret; |
| |
| if (WARN_ON(info->npwm > MAX_PWMS)) |
| return ERR_PTR(-ENODEV); |
| |
| lpwm = devm_kzalloc(dev, sizeof(*lpwm), GFP_KERNEL); |
| if (!lpwm) |
| return ERR_PTR(-ENOMEM); |
| |
| lpwm->regs = devm_ioremap_resource(dev, r); |
| if (IS_ERR(lpwm->regs)) |
| return ERR_CAST(lpwm->regs); |
| |
| lpwm->info = info; |
| |
| c = lpwm->info->clk_rate; |
| if (!c) |
| return ERR_PTR(-EINVAL); |
| |
| lpwm->chip.dev = dev; |
| lpwm->chip.ops = &pwm_lpss_ops; |
| lpwm->chip.base = -1; |
| lpwm->chip.npwm = info->npwm; |
| |
| ret = pwmchip_add(&lpwm->chip); |
| if (ret) { |
| dev_err(dev, "failed to add PWM chip: %d\n", ret); |
| return ERR_PTR(ret); |
| } |
| |
| return lpwm; |
| } |
| EXPORT_SYMBOL_GPL(pwm_lpss_probe); |
| |
| int pwm_lpss_remove(struct pwm_lpss_chip *lpwm) |
| { |
| return pwmchip_remove(&lpwm->chip); |
| } |
| EXPORT_SYMBOL_GPL(pwm_lpss_remove); |
| |
| int pwm_lpss_suspend(struct device *dev) |
| { |
| struct pwm_lpss_chip *lpwm = dev_get_drvdata(dev); |
| int i; |
| |
| for (i = 0; i < lpwm->info->npwm; i++) |
| lpwm->saved_ctrl[i] = readl(lpwm->regs + i * PWM_SIZE + PWM); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(pwm_lpss_suspend); |
| |
| int pwm_lpss_resume(struct device *dev) |
| { |
| struct pwm_lpss_chip *lpwm = dev_get_drvdata(dev); |
| int i; |
| |
| for (i = 0; i < lpwm->info->npwm; i++) |
| writel(lpwm->saved_ctrl[i], lpwm->regs + i * PWM_SIZE + PWM); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(pwm_lpss_resume); |
| |
| MODULE_DESCRIPTION("PWM driver for Intel LPSS"); |
| MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>"); |
| MODULE_LICENSE("GPL v2"); |