| /* |
| * Streamzap Remote Control driver |
| * |
| * Copyright (c) 2005 Christoph Bartelmus <lirc@bartelmus.de> |
| * Copyright (c) 2010 Jarod Wilson <jarod@wilsonet.com> |
| * |
| * This driver was based on the work of Greg Wickham and Adrian |
| * Dewhurst. It was substantially rewritten to support correct signal |
| * gaps and now maintains a delay buffer, which is used to present |
| * consistent timing behaviour to user space applications. Without the |
| * delay buffer an ugly hack would be required in lircd, which can |
| * cause sluggish signal decoding in certain situations. |
| * |
| * Ported to in-kernel ir-core interface by Jarod Wilson |
| * |
| * This driver is based on the USB skeleton driver packaged with the |
| * kernel; copyright (C) 2001-2003 Greg Kroah-Hartman (greg@kroah.com) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/usb.h> |
| #include <linux/usb/input.h> |
| #include <media/rc-core.h> |
| |
| #define DRIVER_VERSION "1.61" |
| #define DRIVER_NAME "streamzap" |
| #define DRIVER_DESC "Streamzap Remote Control driver" |
| |
| #ifdef CONFIG_USB_DEBUG |
| static int debug = 1; |
| #else |
| static int debug; |
| #endif |
| |
| #define USB_STREAMZAP_VENDOR_ID 0x0e9c |
| #define USB_STREAMZAP_PRODUCT_ID 0x0000 |
| |
| /* table of devices that work with this driver */ |
| static struct usb_device_id streamzap_table[] = { |
| /* Streamzap Remote Control */ |
| { USB_DEVICE(USB_STREAMZAP_VENDOR_ID, USB_STREAMZAP_PRODUCT_ID) }, |
| /* Terminating entry */ |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(usb, streamzap_table); |
| |
| #define SZ_PULSE_MASK 0xf0 |
| #define SZ_SPACE_MASK 0x0f |
| #define SZ_TIMEOUT 0xff |
| #define SZ_RESOLUTION 256 |
| |
| /* number of samples buffered */ |
| #define SZ_BUF_LEN 128 |
| |
| /* from ir-rc5-sz-decoder.c */ |
| #ifdef CONFIG_IR_RC5_SZ_DECODER_MODULE |
| #define load_rc5_sz_decode() request_module("ir-rc5-sz-decoder") |
| #else |
| #define load_rc5_sz_decode() 0 |
| #endif |
| |
| enum StreamzapDecoderState { |
| PulseSpace, |
| FullPulse, |
| FullSpace, |
| IgnorePulse |
| }; |
| |
| /* structure to hold our device specific stuff */ |
| struct streamzap_ir { |
| /* ir-core */ |
| struct rc_dev *rdev; |
| |
| /* core device info */ |
| struct device *dev; |
| |
| /* usb */ |
| struct usb_device *usbdev; |
| struct usb_interface *interface; |
| struct usb_endpoint_descriptor *endpoint; |
| struct urb *urb_in; |
| |
| /* buffer & dma */ |
| unsigned char *buf_in; |
| dma_addr_t dma_in; |
| unsigned int buf_in_len; |
| |
| /* track what state we're in */ |
| enum StreamzapDecoderState decoder_state; |
| /* tracks whether we are currently receiving some signal */ |
| bool idle; |
| /* sum of signal lengths received since signal start */ |
| unsigned long sum; |
| /* start time of signal; necessary for gap tracking */ |
| struct timeval signal_last; |
| struct timeval signal_start; |
| bool timeout_enabled; |
| |
| char name[128]; |
| char phys[64]; |
| }; |
| |
| |
| /* local function prototypes */ |
| static int streamzap_probe(struct usb_interface *interface, |
| const struct usb_device_id *id); |
| static void streamzap_disconnect(struct usb_interface *interface); |
| static void streamzap_callback(struct urb *urb); |
| static int streamzap_suspend(struct usb_interface *intf, pm_message_t message); |
| static int streamzap_resume(struct usb_interface *intf); |
| |
| /* usb specific object needed to register this driver with the usb subsystem */ |
| static struct usb_driver streamzap_driver = { |
| .name = DRIVER_NAME, |
| .probe = streamzap_probe, |
| .disconnect = streamzap_disconnect, |
| .suspend = streamzap_suspend, |
| .resume = streamzap_resume, |
| .id_table = streamzap_table, |
| }; |
| |
| static void sz_push(struct streamzap_ir *sz, struct ir_raw_event rawir) |
| { |
| dev_dbg(sz->dev, "Storing %s with duration %u us\n", |
| (rawir.pulse ? "pulse" : "space"), rawir.duration); |
| ir_raw_event_store_with_filter(sz->rdev, &rawir); |
| } |
| |
| static void sz_push_full_pulse(struct streamzap_ir *sz, |
| unsigned char value) |
| { |
| DEFINE_IR_RAW_EVENT(rawir); |
| |
| if (sz->idle) { |
| long deltv; |
| |
| sz->signal_last = sz->signal_start; |
| do_gettimeofday(&sz->signal_start); |
| |
| deltv = sz->signal_start.tv_sec - sz->signal_last.tv_sec; |
| rawir.pulse = false; |
| if (deltv > 15) { |
| /* really long time */ |
| rawir.duration = IR_MAX_DURATION; |
| } else { |
| rawir.duration = (int)(deltv * 1000000 + |
| sz->signal_start.tv_usec - |
| sz->signal_last.tv_usec); |
| rawir.duration -= sz->sum; |
| rawir.duration *= 1000; |
| rawir.duration &= IR_MAX_DURATION; |
| } |
| sz_push(sz, rawir); |
| |
| sz->idle = false; |
| sz->sum = 0; |
| } |
| |
| rawir.pulse = true; |
| rawir.duration = ((int) value) * SZ_RESOLUTION; |
| rawir.duration += SZ_RESOLUTION / 2; |
| sz->sum += rawir.duration; |
| rawir.duration *= 1000; |
| rawir.duration &= IR_MAX_DURATION; |
| sz_push(sz, rawir); |
| } |
| |
| static void sz_push_half_pulse(struct streamzap_ir *sz, |
| unsigned char value) |
| { |
| sz_push_full_pulse(sz, (value & SZ_PULSE_MASK) >> 4); |
| } |
| |
| static void sz_push_full_space(struct streamzap_ir *sz, |
| unsigned char value) |
| { |
| DEFINE_IR_RAW_EVENT(rawir); |
| |
| rawir.pulse = false; |
| rawir.duration = ((int) value) * SZ_RESOLUTION; |
| rawir.duration += SZ_RESOLUTION / 2; |
| sz->sum += rawir.duration; |
| rawir.duration *= 1000; |
| sz_push(sz, rawir); |
| } |
| |
| static void sz_push_half_space(struct streamzap_ir *sz, |
| unsigned long value) |
| { |
| sz_push_full_space(sz, value & SZ_SPACE_MASK); |
| } |
| |
| /** |
| * streamzap_callback - usb IRQ handler callback |
| * |
| * This procedure is invoked on reception of data from |
| * the usb remote. |
| */ |
| static void streamzap_callback(struct urb *urb) |
| { |
| struct streamzap_ir *sz; |
| unsigned int i; |
| int len; |
| |
| if (!urb) |
| return; |
| |
| sz = urb->context; |
| len = urb->actual_length; |
| |
| switch (urb->status) { |
| case -ECONNRESET: |
| case -ENOENT: |
| case -ESHUTDOWN: |
| /* |
| * this urb is terminated, clean up. |
| * sz might already be invalid at this point |
| */ |
| dev_err(sz->dev, "urb terminated, status: %d\n", urb->status); |
| return; |
| default: |
| break; |
| } |
| |
| dev_dbg(sz->dev, "%s: received urb, len %d\n", __func__, len); |
| for (i = 0; i < len; i++) { |
| dev_dbg(sz->dev, "sz->buf_in[%d]: %x\n", |
| i, (unsigned char)sz->buf_in[i]); |
| switch (sz->decoder_state) { |
| case PulseSpace: |
| if ((sz->buf_in[i] & SZ_PULSE_MASK) == |
| SZ_PULSE_MASK) { |
| sz->decoder_state = FullPulse; |
| continue; |
| } else if ((sz->buf_in[i] & SZ_SPACE_MASK) |
| == SZ_SPACE_MASK) { |
| sz_push_half_pulse(sz, sz->buf_in[i]); |
| sz->decoder_state = FullSpace; |
| continue; |
| } else { |
| sz_push_half_pulse(sz, sz->buf_in[i]); |
| sz_push_half_space(sz, sz->buf_in[i]); |
| } |
| break; |
| case FullPulse: |
| sz_push_full_pulse(sz, sz->buf_in[i]); |
| sz->decoder_state = IgnorePulse; |
| break; |
| case FullSpace: |
| if (sz->buf_in[i] == SZ_TIMEOUT) { |
| DEFINE_IR_RAW_EVENT(rawir); |
| |
| rawir.pulse = false; |
| rawir.duration = sz->rdev->timeout; |
| sz->idle = true; |
| if (sz->timeout_enabled) |
| sz_push(sz, rawir); |
| ir_raw_event_handle(sz->rdev); |
| } else { |
| sz_push_full_space(sz, sz->buf_in[i]); |
| } |
| sz->decoder_state = PulseSpace; |
| break; |
| case IgnorePulse: |
| if ((sz->buf_in[i] & SZ_SPACE_MASK) == |
| SZ_SPACE_MASK) { |
| sz->decoder_state = FullSpace; |
| continue; |
| } |
| sz_push_half_space(sz, sz->buf_in[i]); |
| sz->decoder_state = PulseSpace; |
| break; |
| } |
| } |
| |
| usb_submit_urb(urb, GFP_ATOMIC); |
| |
| return; |
| } |
| |
| static struct rc_dev *streamzap_init_rc_dev(struct streamzap_ir *sz) |
| { |
| struct rc_dev *rdev; |
| struct device *dev = sz->dev; |
| int ret; |
| |
| rdev = rc_allocate_device(); |
| if (!rdev) { |
| dev_err(dev, "remote dev allocation failed\n"); |
| goto out; |
| } |
| |
| snprintf(sz->name, sizeof(sz->name), "Streamzap PC Remote Infrared " |
| "Receiver (%04x:%04x)", |
| le16_to_cpu(sz->usbdev->descriptor.idVendor), |
| le16_to_cpu(sz->usbdev->descriptor.idProduct)); |
| usb_make_path(sz->usbdev, sz->phys, sizeof(sz->phys)); |
| strlcat(sz->phys, "/input0", sizeof(sz->phys)); |
| |
| rdev->input_name = sz->name; |
| rdev->input_phys = sz->phys; |
| rdev->priv = sz; |
| rdev->driver_type = RC_DRIVER_IR_RAW; |
| rdev->allowed_protos = IR_TYPE_ALL; |
| rdev->driver_name = DRIVER_NAME; |
| rdev->map_name = RC_MAP_STREAMZAP; |
| |
| ret = rc_register_device(rdev); |
| if (ret < 0) { |
| dev_err(dev, "remote input device register failed\n"); |
| goto out; |
| } |
| |
| return rdev; |
| |
| out: |
| rc_free_device(rdev); |
| return NULL; |
| } |
| |
| /** |
| * streamzap_probe |
| * |
| * Called by usb-core to associated with a candidate device |
| * On any failure the return value is the ERROR |
| * On success return 0 |
| */ |
| static int __devinit streamzap_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| struct usb_device *usbdev = interface_to_usbdev(intf); |
| struct usb_host_interface *iface_host; |
| struct streamzap_ir *sz = NULL; |
| char buf[63], name[128] = ""; |
| int retval = -ENOMEM; |
| int pipe, maxp; |
| |
| /* Allocate space for device driver specific data */ |
| sz = kzalloc(sizeof(struct streamzap_ir), GFP_KERNEL); |
| if (!sz) |
| return -ENOMEM; |
| |
| sz->usbdev = usbdev; |
| sz->interface = intf; |
| |
| /* Check to ensure endpoint information matches requirements */ |
| iface_host = intf->cur_altsetting; |
| |
| if (iface_host->desc.bNumEndpoints != 1) { |
| dev_err(&intf->dev, "%s: Unexpected desc.bNumEndpoints (%d)\n", |
| __func__, iface_host->desc.bNumEndpoints); |
| retval = -ENODEV; |
| goto free_sz; |
| } |
| |
| sz->endpoint = &(iface_host->endpoint[0].desc); |
| if ((sz->endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) |
| != USB_DIR_IN) { |
| dev_err(&intf->dev, "%s: endpoint doesn't match input device " |
| "02%02x\n", __func__, sz->endpoint->bEndpointAddress); |
| retval = -ENODEV; |
| goto free_sz; |
| } |
| |
| if ((sz->endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) |
| != USB_ENDPOINT_XFER_INT) { |
| dev_err(&intf->dev, "%s: endpoint attributes don't match xfer " |
| "02%02x\n", __func__, sz->endpoint->bmAttributes); |
| retval = -ENODEV; |
| goto free_sz; |
| } |
| |
| pipe = usb_rcvintpipe(usbdev, sz->endpoint->bEndpointAddress); |
| maxp = usb_maxpacket(usbdev, pipe, usb_pipeout(pipe)); |
| |
| if (maxp == 0) { |
| dev_err(&intf->dev, "%s: endpoint Max Packet Size is 0!?!\n", |
| __func__); |
| retval = -ENODEV; |
| goto free_sz; |
| } |
| |
| /* Allocate the USB buffer and IRQ URB */ |
| sz->buf_in = usb_alloc_coherent(usbdev, maxp, GFP_ATOMIC, &sz->dma_in); |
| if (!sz->buf_in) |
| goto free_sz; |
| |
| sz->urb_in = usb_alloc_urb(0, GFP_KERNEL); |
| if (!sz->urb_in) |
| goto free_buf_in; |
| |
| sz->dev = &intf->dev; |
| sz->buf_in_len = maxp; |
| |
| if (usbdev->descriptor.iManufacturer |
| && usb_string(usbdev, usbdev->descriptor.iManufacturer, |
| buf, sizeof(buf)) > 0) |
| strlcpy(name, buf, sizeof(name)); |
| |
| if (usbdev->descriptor.iProduct |
| && usb_string(usbdev, usbdev->descriptor.iProduct, |
| buf, sizeof(buf)) > 0) |
| snprintf(name + strlen(name), sizeof(name) - strlen(name), |
| " %s", buf); |
| |
| sz->rdev = streamzap_init_rc_dev(sz); |
| if (!sz->rdev) |
| goto rc_dev_fail; |
| |
| sz->idle = true; |
| sz->decoder_state = PulseSpace; |
| /* FIXME: don't yet have a way to set this */ |
| sz->timeout_enabled = true; |
| sz->rdev->timeout = (((SZ_TIMEOUT * SZ_RESOLUTION * 1000) & |
| IR_MAX_DURATION) | 0x03000000); |
| #if 0 |
| /* not yet supported, depends on patches from maxim */ |
| /* see also: LIRC_GET_REC_RESOLUTION and LIRC_SET_REC_TIMEOUT */ |
| sz->min_timeout = SZ_TIMEOUT * SZ_RESOLUTION * 1000; |
| sz->max_timeout = SZ_TIMEOUT * SZ_RESOLUTION * 1000; |
| #endif |
| |
| do_gettimeofday(&sz->signal_start); |
| |
| /* Complete final initialisations */ |
| usb_fill_int_urb(sz->urb_in, usbdev, pipe, sz->buf_in, |
| maxp, (usb_complete_t)streamzap_callback, |
| sz, sz->endpoint->bInterval); |
| sz->urb_in->transfer_dma = sz->dma_in; |
| sz->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; |
| |
| usb_set_intfdata(intf, sz); |
| |
| if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) |
| dev_err(sz->dev, "urb submit failed\n"); |
| |
| dev_info(sz->dev, "Registered %s on usb%d:%d\n", name, |
| usbdev->bus->busnum, usbdev->devnum); |
| |
| /* Load the streamzap not-quite-rc5 decoder too */ |
| load_rc5_sz_decode(); |
| |
| return 0; |
| |
| rc_dev_fail: |
| usb_free_urb(sz->urb_in); |
| free_buf_in: |
| usb_free_coherent(usbdev, maxp, sz->buf_in, sz->dma_in); |
| free_sz: |
| kfree(sz); |
| |
| return retval; |
| } |
| |
| /** |
| * streamzap_disconnect |
| * |
| * Called by the usb core when the device is removed from the system. |
| * |
| * This routine guarantees that the driver will not submit any more urbs |
| * by clearing dev->usbdev. It is also supposed to terminate any currently |
| * active urbs. Unfortunately, usb_bulk_msg(), used in streamzap_read(), |
| * does not provide any way to do this. |
| */ |
| static void streamzap_disconnect(struct usb_interface *interface) |
| { |
| struct streamzap_ir *sz = usb_get_intfdata(interface); |
| struct usb_device *usbdev = interface_to_usbdev(interface); |
| |
| usb_set_intfdata(interface, NULL); |
| |
| if (!sz) |
| return; |
| |
| sz->usbdev = NULL; |
| rc_unregister_device(sz->rdev); |
| usb_kill_urb(sz->urb_in); |
| usb_free_urb(sz->urb_in); |
| usb_free_coherent(usbdev, sz->buf_in_len, sz->buf_in, sz->dma_in); |
| |
| kfree(sz); |
| } |
| |
| static int streamzap_suspend(struct usb_interface *intf, pm_message_t message) |
| { |
| struct streamzap_ir *sz = usb_get_intfdata(intf); |
| |
| usb_kill_urb(sz->urb_in); |
| |
| return 0; |
| } |
| |
| static int streamzap_resume(struct usb_interface *intf) |
| { |
| struct streamzap_ir *sz = usb_get_intfdata(intf); |
| |
| if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) { |
| dev_err(sz->dev, "Error sumbiting urb\n"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * streamzap_init |
| */ |
| static int __init streamzap_init(void) |
| { |
| int ret; |
| |
| /* register this driver with the USB subsystem */ |
| ret = usb_register(&streamzap_driver); |
| if (ret < 0) |
| printk(KERN_ERR DRIVER_NAME ": usb register failed, " |
| "result = %d\n", ret); |
| |
| return ret; |
| } |
| |
| /** |
| * streamzap_exit |
| */ |
| static void __exit streamzap_exit(void) |
| { |
| usb_deregister(&streamzap_driver); |
| } |
| |
| |
| module_init(streamzap_init); |
| module_exit(streamzap_exit); |
| |
| MODULE_AUTHOR("Jarod Wilson <jarod@wilsonet.com>"); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL"); |
| |
| module_param(debug, bool, S_IRUGO | S_IWUSR); |
| MODULE_PARM_DESC(debug, "Enable debugging messages"); |