arm64: enable context tracking
Make calls to ct_user_enter when the kernel is exited
and ct_user_exit when the kernel is entered (in el0_da,
el0_ia, el0_svc, el0_irq and all of the "error" paths).
These macros expand to function calls which will only work
properly if el0_sync and related code has been rearranged
(in a previous patch of this series).
The calls to ct_user_exit are made after hw debugging has been
enabled (enable_dbg_and_irq).
The call to ct_user_enter is made at the beginning of the
kernel_exit macro.
This patch is based on earlier work by Kevin Hilman.
Save/restore optimizations were also done by Kevin.
Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Larry Bassel <larry.bassel@linaro.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index f865436..1cb8065 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -63,6 +63,7 @@
select RTC_LIB
select SPARSE_IRQ
select SYSCTL_EXCEPTION_TRACE
+ select HAVE_CONTEXT_TRACKING
help
ARM 64-bit (AArch64) Linux support.
diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
index e40b6d0..45108d8 100644
--- a/arch/arm64/include/asm/thread_info.h
+++ b/arch/arm64/include/asm/thread_info.h
@@ -103,6 +103,7 @@
#define TIF_NEED_RESCHED 1
#define TIF_NOTIFY_RESUME 2 /* callback before returning to user */
#define TIF_FOREIGN_FPSTATE 3 /* CPU's FP state is not current's */
+#define TIF_NOHZ 7
#define TIF_SYSCALL_TRACE 8
#define TIF_SYSCALL_AUDIT 9
#define TIF_SYSCALL_TRACEPOINT 10
@@ -118,6 +119,7 @@
#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
#define _TIF_FOREIGN_FPSTATE (1 << TIF_FOREIGN_FPSTATE)
+#define _TIF_NOHZ (1 << TIF_NOHZ)
#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT)
#define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT)
@@ -128,7 +130,8 @@
_TIF_NOTIFY_RESUME | _TIF_FOREIGN_FPSTATE)
#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
- _TIF_SYSCALL_TRACEPOINT | _TIF_SECCOMP)
+ _TIF_SYSCALL_TRACEPOINT | _TIF_SECCOMP | \
+ _TIF_NOHZ)
#endif /* __KERNEL__ */
#endif /* __ASM_THREAD_INFO_H */
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index d7230bf..93ac58d 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -30,6 +30,32 @@
#include <asm/unistd32.h>
/*
+ * Context tracking subsystem. Used to instrument transitions
+ * between user and kernel mode.
+ */
+ .macro ct_user_exit, syscall = 0
+#ifdef CONFIG_CONTEXT_TRACKING
+ bl context_tracking_user_exit
+ .if \syscall == 1
+ /*
+ * Save/restore needed during syscalls. Restore syscall arguments from
+ * the values already saved on stack during kernel_entry.
+ */
+ ldp x0, x1, [sp]
+ ldp x2, x3, [sp, #S_X2]
+ ldp x4, x5, [sp, #S_X4]
+ ldp x6, x7, [sp, #S_X6]
+ .endif
+#endif
+ .endm
+
+ .macro ct_user_enter
+#ifdef CONFIG_CONTEXT_TRACKING
+ bl context_tracking_user_enter
+#endif
+ .endm
+
+/*
* Bad Abort numbers
*-----------------
*/
@@ -91,6 +117,7 @@
.macro kernel_exit, el, ret = 0
ldp x21, x22, [sp, #S_PC] // load ELR, SPSR
.if \el == 0
+ ct_user_enter
ldr x23, [sp, #S_SP] // load return stack pointer
.endif
.if \ret
@@ -426,6 +453,7 @@
mrs x26, far_el1
// enable interrupts before calling the main handler
enable_dbg_and_irq
+ ct_user_exit
bic x0, x26, #(0xff << 56)
mov x1, x25
mov x2, sp
@@ -438,6 +466,7 @@
mrs x26, far_el1
// enable interrupts before calling the main handler
enable_dbg_and_irq
+ ct_user_exit
mov x0, x26
orr x1, x25, #1 << 24 // use reserved ISS bit for instruction aborts
mov x2, sp
@@ -448,6 +477,7 @@
* Floating Point or Advanced SIMD access
*/
enable_dbg
+ ct_user_exit
mov x0, x25
mov x1, sp
adr lr, ret_to_user
@@ -457,6 +487,7 @@
* Floating Point or Advanced SIMD exception
*/
enable_dbg
+ ct_user_exit
mov x0, x25
mov x1, sp
adr lr, ret_to_user
@@ -479,6 +510,7 @@
*/
// enable interrupts before calling the main handler
enable_dbg_and_irq
+ ct_user_exit
mov x0, sp
adr lr, ret_to_user
b do_undefinstr
@@ -492,9 +524,11 @@
mov x2, sp
bl do_debug_exception
enable_dbg
+ ct_user_exit
b ret_to_user
el0_inv:
enable_dbg
+ ct_user_exit
mov x0, sp
mov x1, #BAD_SYNC
mrs x2, esr_el1
@@ -511,6 +545,7 @@
bl trace_hardirqs_off
#endif
+ ct_user_exit
irq_handler
#ifdef CONFIG_TRACE_IRQFLAGS
@@ -615,6 +650,7 @@
el0_svc_naked: // compat entry point
stp x0, scno, [sp, #S_ORIG_X0] // save the original x0 and syscall number
enable_dbg_and_irq
+ ct_user_exit 1
ldr x16, [tsk, #TI_FLAGS] // check for syscall hooks
tst x16, #_TIF_SYSCALL_WORK