ARM: dts: msm: Add device tree file for sdw3100 wtp for 1gb variant
Add dts file for 1gb variant for sdw3100 wtp.
Change-Id: Ieea781da86c54f382dc6f50899da113720fc95e9
Signed-off-by: Archit Saxena <archsaxe@codeaurora.org>
Signed-off-by: Jagadeesh Banisetti <jbanis@codeaurora.org>
diff --git a/arch/arm64/boot/dts/qcom/sdw3100-msm8909w-1gb-wtp.dts b/arch/arm64/boot/dts/qcom/sdw3100-msm8909w-1gb-wtp.dts
new file mode 100644
index 0000000..e3bdfd9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdw3100-msm8909w-1gb-wtp.dts
@@ -0,0 +1,355 @@
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "msm8909-mtp.dtsi"
+#include "msm8909w-gpu.dtsi"
+#include "msm8909w.dtsi"
+#include "msm8909w-bg-memory.dtsi"
+#include "8909w-pm660.dtsi"
+#include "msm8909-audio-bg_codec.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. MSM8909W BG 1GB WTP SDW3100";
+ compatible = "qcom,msm8909-mtp", "qcom,msm8909", "qcom,mtp";
+ qcom,msm-id = <245 0>,
+ <258 0>,
+ <275 0>,
+ <300 0>;
+ qcom,board-id = <8 0xf>;
+ qcom,pmic-id = <0x0001001b 0x0 0x0 0x0>,
+ <0x0001011b 0x0 0x0 0x0>;
+};
+
+&soc {
+ i2c@78b9000 { /* BLSP1 QUP5 */
+ synaptics@20 {
+ compatible = "synaptics,dsx-i2c";
+ reg = <0x20>;
+ interrupt-parent = <&msm_gpio>;
+ interrupts = <98 0x2008>;
+ vdd_ana-supply = <&pm660_l18>;
+ vcc_i2c-supply = <&pm660_l13>;
+ synaptics,pwr-reg-name = "vdd_ana";
+ synaptics,bus-reg-name = "vcc_i2c";
+ pinctrl-names = "pmx_ts_active", "pmx_ts_suspend",
+ "pmx_ts_release";
+ pinctrl-0 = <&ts_int_active &ts_reset_active>;
+ pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
+ pinctrl-2 = <&ts_release>;
+ synaptics,irq-gpio = <&msm_gpio 98 0x2008>;
+ synaptics,irq-on-state = <0>;
+ synaptics,irq-flags = <0x2008>;
+ synaptics,power-delay-ms = <200>;
+ synaptics,reset-delay-ms = <200>;
+ synaptics,max-y-for-2d = <389>;
+ synaptics,bus-lpm-cur-uA = <450>;
+ synaptics,do-not-disable-regulators;
+ synaptics,wakeup-gestures-en;
+ synaptics,resume-in-workqueue;
+ synaptics,x-flip;
+ synaptics,y-flip;
+ /delete-property/ synaptics,reset-gpio;
+ /delete-property/ synaptics,display-coords;
+ /delete-property/ synaptics,panel-coords;
+ /delete-property/ synaptics,power-down;
+ /delete-property/ synaptics,disable-gpios;
+ /delete-property/ synaptics,is_wake;
+ };
+
+ /delete-node/ it7260@46;
+ };
+
+ qcom,blackghost {
+ compatible = "qcom,pil-blackghost";
+
+ qcom,pil-force-shutdown;
+ qcom,firmware-name = "bg-wear";
+ /* GPIO inputs from blackghost */
+ qcom,bg2ap-status-gpio = <&msm_gpio 97 0>;
+ qcom,bg2ap-errfatal-gpio = <&msm_gpio 95 0>;
+ /* GPIO output to blackghost */
+ qcom,ap2bg-status-gpio = <&msm_gpio 17 0>;
+ qcom,ap2bg-errfatal-gpio = <&msm_gpio 23 0>;
+ };
+
+ qcom,msm-ssc-sensors {
+ compatible = "qcom,msm-ssc-sensors";
+ };
+
+ qcom,glink-bgcom-xprt-bg {
+ compatible = "qcom,glink-bgcom-xprt";
+ label = "bg";
+ qcom,qos-config = <&glink_qos_bg>;
+ qcom,ramp-time = <0x10>,
+ <0x20>,
+ <0x30>,
+ <0x40>;
+ };
+
+ glink_qos_bg: qcom,glink-qos-config-bg {
+ compatible = "qcom,glink-qos-config";
+ qcom,flow-info = <0x80 0x0>,
+ <0x70 0x1>,
+ <0x60 0x2>,
+ <0x50 0x3>;
+ qcom,mtu-size = <0x800>;
+ qcom,tput-stats-cycle = <0xa>;
+ };
+
+ qcom,glink_pkt {
+ compatible = "qcom,glinkpkt";
+
+ qcom,glinkpkt-bg-daemon {
+ qcom,glinkpkt-transport = "bgcom";
+ qcom,glinkpkt-edge = "bg";
+ qcom,glinkpkt-ch-name = "bg-daemon";
+ qcom,glinkpkt-dev-name = "glink_pkt_bg_daemon";
+ };
+
+ qcom,glinkpkt-bg-display-ctrl {
+ qcom,glinkpkt-transport = "bgcom";
+ qcom,glinkpkt-edge = "bg";
+ qcom,glinkpkt-ch-name = "display-ctrl";
+ qcom,glinkpkt-dev-name = "glink_pkt_bg_display_ctrl";
+ };
+
+ qcom,glinkpkt-bg-display-data {
+ qcom,glinkpkt-transport = "bgcom";
+ qcom,glinkpkt-edge = "bg";
+ qcom,glinkpkt-ch-name = "display-data";
+ qcom,glinkpkt-dev-name = "glink_pkt_bg_display_data";
+ };
+
+ qcom,glinkpkt-bg-rsb-ctrl {
+ qcom,glinkpkt-transport = "bgcom";
+ qcom,glinkpkt-edge = "bg";
+ qcom,glinkpkt-ch-name = "RSB_CTRL";
+ qcom,glinkpkt-dev-name = "glink_pkt_bg_rsb_ctrl";
+ };
+ };
+
+ spi@78B8000 { /* BLSP1 QUP4 */
+ status = "ok";
+ qcom,bg-spi {
+ compatible = "qcom,bg-spi";
+ reg = <0>;
+ spi-max-frequency = <16000000>;
+ interrupt-parent = <&msm_gpio>;
+ qcom,irq-gpio = <&msm_gpio 110 1>;
+ };
+ };
+
+ qcom,msm-thermal {
+ vdd-dig-supply = <&pm660_s2_floor_corner>;
+
+ msm_thermal_freq: qcom,vdd-apps-rstr {
+ qcom,vdd-rstr-reg = "vdd-apps";
+ qcom,levels = <1094400>;
+ qcom,freq-req;
+ };
+ };
+
+ qcom,bg-rsb {
+ compatible = "qcom,bg-rsb";
+ vdd-ldo1-supply = <&pm660_l11>;
+ vdd-ldo2-supply = <&pm660_l15>;
+ };
+
+ qcom,bg-daemon {
+ compatible = "qcom,bg-daemon";
+ qcom,bg-reset-gpio = <&pm660_gpios 5 0>;
+ ssr-reg1-supply = <&pm660_l3>;
+ ssr-reg2-supply = <&pm660_l9>;
+ };
+
+ qcom,bcl {
+ compatible = "qcom,bcl";
+ qcom,bcl-enable;
+ qcom,bcl-framework-interface;
+ qcom,bcl-freq-control-list = <&CPU0 &CPU1 &CPU2 &CPU3>;
+ qcom,bcl-hotplug-list = <&CPU2 &CPU3>;
+ qcom,bcl-soc-hotplug-list = <&CPU2 &CPU3>;
+ qcom,ibat-monitor {
+ qcom,low-threshold-uamp = <1000000>;
+ qcom,high-threshold-uamp = <2000000>;
+ qcom,mitigation-freq-khz = <1094400>;
+ qcom,vph-high-threshold-uv = <3500000>;
+ qcom,vph-low-threshold-uv = <3200000>;
+ qcom,soc-low-threshold = <10>;
+ qcom,thermal-handle = <&msm_thermal_freq>;
+ };
+ };
+};
+
+&audio_codec_mtp {
+ status = "disabled";
+};
+
+&audio_codec_bg {
+ status = "ok";
+};
+
+&bg_cdc {
+ status = "ok";
+ vdd-spkr-supply = <&pm660_l11>;
+};
+
+&i2c_1 {
+ status = "okay";
+ nq@28 {
+ compatible = "qcom,nq-nci";
+ reg = <0x28>;
+ qcom,nq-irq = <&msm_gpio 50 0x00>;
+ qcom,nq-ven = <&msm_gpio 36 0x00>;
+ qcom,nq-firm = <&msm_gpio 38 0x00>;
+ qcom,nq-esepwr = <&msm_gpio 49 0x00>;
+ qcom,nq-clkreq = <&pm660_gpios 4 0x00>;
+ qcom,clk-src = "BBCLK3";
+ interrupt-parent = <&msm_gpio>;
+ interrupts = <50 0>;
+ interrupt-names = "nfc_irq";
+ pinctrl-names = "nfc_active","nfc_suspend";
+ pinctrl-0 = <&nfcw_int_active &nfcw_disable_active
+ &nfc_clk_default>;
+ pinctrl-1 = <&nfcw_int_suspend &nfcw_disable_suspend>;
+ clocks = <&clock_rpm clk_bb_clk3_pin>;
+ clock-names = "ref_clk";
+ };
+};
+
+&spi_0 {
+ status = "disabled";
+};
+
+&i2c_3 {
+ status = "disabled";
+};
+
+&i2c_4 {
+ status = "disabled";
+};
+
+&i2c_2 {
+ status = "disabled";
+};
+
+&sdc1_clk_off {
+ config {
+ pins = "sdc1_clk";
+ bias-disable; /* NO pull */
+ drive-strength = <2>; /* 2 MA */
+ output-low;
+ };
+};
+
+&sdc1_cmd_off {
+ config {
+ pins = "sdc1_cmd";
+ bias-disable; /* NO pull */
+ drive-strength = <2>; /* 2 MA */
+ output-low;
+ };
+};
+
+&sdc1_data_off {
+ config {
+ pins = "sdc1_data";
+ bias-disable; /* NO pull */
+ drive-strength = <2>; /* 2 MA */
+ output-low;
+ };
+};
+
+&sdhc_2 {
+ status = "disabled";
+};
+
+&blsp1_uart1 {
+ status = "ok";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart_console_sleep>;
+};
+
+/* Pinctrl dt nodes for interrupt & reset gpio for Synaptics touch controller */
+&ts_int_active {
+ mux {
+ pins = "gpio98";
+ };
+
+ config {
+ pins = "gpio98";
+ };
+};
+
+&ts_int_suspend {
+ mux {
+ pins = "gpio98";
+ };
+
+ config {
+ pins = "gpio98";
+ /delete-property/ bias-pull-down;
+ bias-disable; /* No PULL */
+ };
+};
+
+&ts_reset_active {
+ mux {
+ pins = "gpio16";
+ };
+
+ config {
+ pins = "gpio16";
+ };
+};
+
+&ts_reset_suspend {
+ mux {
+ pins = "gpio16";
+ };
+
+ config {
+ pins = "gpio16";
+ };
+};
+
+&ts_release {
+ mux {
+ pins = "gpio98", "gpio16";
+ };
+
+ config {
+ pins = "gpio98", "gpio16";
+ };
+};
+
+&spi4_cs0_active {
+ mux {
+ pins = "gpio14";
+ function = "blsp_spi4";
+ };
+ config {
+ pins = "gpio14";
+ drive-strength = <2>;
+ bias-disable; /* No PULL */
+ output-high;
+ };
+};
+
+&mdss_dsi0 {
+ qcom,dsi-pref-prim-pan = <&dsi_auo_390p_cmd>;
+ qcom,platform-bklight-en-gpio = <&msm_gpio 52 0>;
+ qcom,platform-enable-gpio = <&msm_gpio 59 0>;
+};