blob: 47c0282bdfca7ce11a8ce0e05119f8df229b9a4f [file] [log] [blame]
#include "qcom-apq8064-v2.0.dtsi"
/ {
model = "CompuLab CM-QS600";
compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
aliases {
serial0 = &gsbi7_serial;
};
chosen {
stdout-path = "serial0:115200n8";
};
soc {
pinctrl@800000 {
i2c1_pins: i2c1 {
mux {
pins = "gpio20", "gpio21";
function = "gsbi1";
};
};
};
rpm@108000 {
regulators {
vin_lvs1_3_6-supply = <&pm8921_s4>;
vin_lvs2-supply = <&pm8921_s1>;
vin_lvs4_5_7-supply = <&pm8921_s4>;
vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
vdd_l24-supply = <&pm8921_s1>;
vdd_l25-supply = <&pm8921_s1>;
vdd_l26-supply = <&pm8921_s7>;
vdd_l27-supply = <&pm8921_s7>;
vdd_l28-supply = <&pm8921_s7>;
/* Buck SMPS */
pm8921_s1: s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
qcom,switch-mode-frequency = <3200000>;
bias-pull-down;
};
pm8921_s3: s3 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
qcom,switch-mode-frequency = <4800000>;
};
pm8921_s4: s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
};
pm8921_s7: s7 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <3200000>;
};
pm8921_l3: l3 {
regulator-min-microvolt = <3050000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
pm8921_l4: l4 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
pm8921_l5: l5 {
regulator-min-microvolt = <2750000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
pm8921_l23: l23 {
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
bias-pull-down;
};
};
};
gsbi@12440000 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C>;
i2c@12460000 {
status = "okay";
clock-frequency = <200000>;
pinctrl-0 = <&i2c1_pins>;
pinctrl-names = "default";
eeprom: eeprom@50 {
compatible = "24c02";
reg = <0x50>;
pagesize = <32>;
};
};
};
gsbi@16600000 {
status = "ok";
qcom,mode = <GSBI_PROT_I2C_UART>;
serial@16640000 {
status = "ok";
};
};
/* OTG */
usb1_phy: phy@12500000 {
status = "okay";
vddcx-supply = <&pm8921_s3>;
v3p3-supply = <&pm8921_l3>;
v1p8-supply = <&pm8921_l4>;
};
usb3_phy: phy@12520000 {
status = "okay";
vddcx-supply = <&pm8921_s3>;
v3p3-supply = <&pm8921_l3>;
v1p8-supply = <&pm8921_l23>;
};
usb4_phy: phy@12530000 {
status = "okay";
vddcx-supply = <&pm8921_s3>;
v3p3-supply = <&pm8921_l3>;
v1p8-supply = <&pm8921_l23>;
};
gadget1: gadget@12500000 {
status = "ok";
};
/* OTG */
usb1: usb@12500000 {
status = "ok";
};
usb3: usb@12520000 {
status = "okay";
};
usb4: usb@12530000 {
status = "okay";
};
/* on board fixed 3.3v supply */
v3p3_fixed: v3p3 {
compatible = "regulator-fixed";
regulator-name = "PCIE V3P3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
amba {
/* eMMC */
sdcc1: sdcc@12400000 {
status = "okay";
vmmc-supply = <&pm8921_l5>;
vqmmc-supply = <&pm8921_s4>;
};
/* External micro SD card */
sdcc3: sdcc@12180000 {
status = "okay";
vmmc-supply = <&v3p3_fixed>;
};
/* WLAN */
sdcc4: sdcc@121c0000 {
status = "okay";
vmmc-supply = <&v3p3_fixed>;
vqmmc-supply = <&v3p3_fixed>;
};
};
};
};