| /* |
| * Driver for Feature Integration Technology Inc. (aka Fintek) LPC CIR |
| * |
| * Copyright (C) 2011 Jarod Wilson <jarod@redhat.com> |
| * |
| * Special thanks to Fintek for providing hardware and spec sheets. |
| * This driver is based upon the nuvoton, ite and ene drivers for |
| * similar hardware. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 |
| * USA |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/pnp.h> |
| #include <linux/io.h> |
| #include <linux/interrupt.h> |
| #include <linux/sched.h> |
| #include <linux/slab.h> |
| #include <media/rc-core.h> |
| #include <linux/pci_ids.h> |
| |
| #include "fintek-cir.h" |
| |
| /* write val to config reg */ |
| static inline void fintek_cr_write(struct fintek_dev *fintek, u8 val, u8 reg) |
| { |
| fit_dbg("%s: reg 0x%02x, val 0x%02x (ip/dp: %02x/%02x)", |
| __func__, reg, val, fintek->cr_ip, fintek->cr_dp); |
| outb(reg, fintek->cr_ip); |
| outb(val, fintek->cr_dp); |
| } |
| |
| /* read val from config reg */ |
| static inline u8 fintek_cr_read(struct fintek_dev *fintek, u8 reg) |
| { |
| u8 val; |
| |
| outb(reg, fintek->cr_ip); |
| val = inb(fintek->cr_dp); |
| |
| fit_dbg("%s: reg 0x%02x, val 0x%02x (ip/dp: %02x/%02x)", |
| __func__, reg, val, fintek->cr_ip, fintek->cr_dp); |
| return val; |
| } |
| |
| /* update config register bit without changing other bits */ |
| static inline void fintek_set_reg_bit(struct fintek_dev *fintek, u8 val, u8 reg) |
| { |
| u8 tmp = fintek_cr_read(fintek, reg) | val; |
| fintek_cr_write(fintek, tmp, reg); |
| } |
| |
| /* clear config register bit without changing other bits */ |
| static inline void fintek_clear_reg_bit(struct fintek_dev *fintek, u8 val, u8 reg) |
| { |
| u8 tmp = fintek_cr_read(fintek, reg) & ~val; |
| fintek_cr_write(fintek, tmp, reg); |
| } |
| |
| /* enter config mode */ |
| static inline void fintek_config_mode_enable(struct fintek_dev *fintek) |
| { |
| /* Enabling Config Mode explicitly requires writing 2x */ |
| outb(CONFIG_REG_ENABLE, fintek->cr_ip); |
| outb(CONFIG_REG_ENABLE, fintek->cr_ip); |
| } |
| |
| /* exit config mode */ |
| static inline void fintek_config_mode_disable(struct fintek_dev *fintek) |
| { |
| outb(CONFIG_REG_DISABLE, fintek->cr_ip); |
| } |
| |
| /* |
| * When you want to address a specific logical device, write its logical |
| * device number to GCR_LOGICAL_DEV_NO |
| */ |
| static inline void fintek_select_logical_dev(struct fintek_dev *fintek, u8 ldev) |
| { |
| fintek_cr_write(fintek, ldev, GCR_LOGICAL_DEV_NO); |
| } |
| |
| /* write val to cir config register */ |
| static inline void fintek_cir_reg_write(struct fintek_dev *fintek, u8 val, u8 offset) |
| { |
| outb(val, fintek->cir_addr + offset); |
| } |
| |
| /* read val from cir config register */ |
| static u8 fintek_cir_reg_read(struct fintek_dev *fintek, u8 offset) |
| { |
| u8 val; |
| |
| val = inb(fintek->cir_addr + offset); |
| |
| return val; |
| } |
| |
| /* dump current cir register contents */ |
| static void cir_dump_regs(struct fintek_dev *fintek) |
| { |
| fintek_config_mode_enable(fintek); |
| fintek_select_logical_dev(fintek, fintek->logical_dev_cir); |
| |
| pr_info("%s: Dump CIR logical device registers:\n", FINTEK_DRIVER_NAME); |
| pr_info(" * CR CIR BASE ADDR: 0x%x\n", |
| (fintek_cr_read(fintek, CIR_CR_BASE_ADDR_HI) << 8) | |
| fintek_cr_read(fintek, CIR_CR_BASE_ADDR_LO)); |
| pr_info(" * CR CIR IRQ NUM: 0x%x\n", |
| fintek_cr_read(fintek, CIR_CR_IRQ_SEL)); |
| |
| fintek_config_mode_disable(fintek); |
| |
| pr_info("%s: Dump CIR registers:\n", FINTEK_DRIVER_NAME); |
| pr_info(" * STATUS: 0x%x\n", |
| fintek_cir_reg_read(fintek, CIR_STATUS)); |
| pr_info(" * CONTROL: 0x%x\n", |
| fintek_cir_reg_read(fintek, CIR_CONTROL)); |
| pr_info(" * RX_DATA: 0x%x\n", |
| fintek_cir_reg_read(fintek, CIR_RX_DATA)); |
| pr_info(" * TX_CONTROL: 0x%x\n", |
| fintek_cir_reg_read(fintek, CIR_TX_CONTROL)); |
| pr_info(" * TX_DATA: 0x%x\n", |
| fintek_cir_reg_read(fintek, CIR_TX_DATA)); |
| } |
| |
| /* detect hardware features */ |
| static int fintek_hw_detect(struct fintek_dev *fintek) |
| { |
| unsigned long flags; |
| u8 chip_major, chip_minor; |
| u8 vendor_major, vendor_minor; |
| u8 portsel, ir_class; |
| u16 vendor, chip; |
| int ret = 0; |
| |
| fintek_config_mode_enable(fintek); |
| |
| /* Check if we're using config port 0x4e or 0x2e */ |
| portsel = fintek_cr_read(fintek, GCR_CONFIG_PORT_SEL); |
| if (portsel == 0xff) { |
| fit_pr(KERN_INFO, "first portsel read was bunk, trying alt"); |
| fintek_config_mode_disable(fintek); |
| fintek->cr_ip = CR_INDEX_PORT2; |
| fintek->cr_dp = CR_DATA_PORT2; |
| fintek_config_mode_enable(fintek); |
| portsel = fintek_cr_read(fintek, GCR_CONFIG_PORT_SEL); |
| } |
| fit_dbg("portsel reg: 0x%02x", portsel); |
| |
| ir_class = fintek_cir_reg_read(fintek, CIR_CR_CLASS); |
| fit_dbg("ir_class reg: 0x%02x", ir_class); |
| |
| switch (ir_class) { |
| case CLASS_RX_2TX: |
| case CLASS_RX_1TX: |
| fintek->hw_tx_capable = true; |
| break; |
| case CLASS_RX_ONLY: |
| default: |
| fintek->hw_tx_capable = false; |
| break; |
| } |
| |
| chip_major = fintek_cr_read(fintek, GCR_CHIP_ID_HI); |
| chip_minor = fintek_cr_read(fintek, GCR_CHIP_ID_LO); |
| chip = chip_major << 8 | chip_minor; |
| |
| vendor_major = fintek_cr_read(fintek, GCR_VENDOR_ID_HI); |
| vendor_minor = fintek_cr_read(fintek, GCR_VENDOR_ID_LO); |
| vendor = vendor_major << 8 | vendor_minor; |
| |
| if (vendor != VENDOR_ID_FINTEK) |
| fit_pr(KERN_WARNING, "Unknown vendor ID: 0x%04x", vendor); |
| else |
| fit_dbg("Read Fintek vendor ID from chip"); |
| |
| fintek_config_mode_disable(fintek); |
| |
| spin_lock_irqsave(&fintek->fintek_lock, flags); |
| fintek->chip_major = chip_major; |
| fintek->chip_minor = chip_minor; |
| fintek->chip_vendor = vendor; |
| |
| /* |
| * Newer reviews of this chipset uses port 8 instead of 5 |
| */ |
| if ((chip != 0x0408) && (chip != 0x0804)) |
| fintek->logical_dev_cir = LOGICAL_DEV_CIR_REV2; |
| else |
| fintek->logical_dev_cir = LOGICAL_DEV_CIR_REV1; |
| |
| spin_unlock_irqrestore(&fintek->fintek_lock, flags); |
| |
| return ret; |
| } |
| |
| static void fintek_cir_ldev_init(struct fintek_dev *fintek) |
| { |
| /* Select CIR logical device and enable */ |
| fintek_select_logical_dev(fintek, fintek->logical_dev_cir); |
| fintek_cr_write(fintek, LOGICAL_DEV_ENABLE, CIR_CR_DEV_EN); |
| |
| /* Write allocated CIR address and IRQ information to hardware */ |
| fintek_cr_write(fintek, fintek->cir_addr >> 8, CIR_CR_BASE_ADDR_HI); |
| fintek_cr_write(fintek, fintek->cir_addr & 0xff, CIR_CR_BASE_ADDR_LO); |
| |
| fintek_cr_write(fintek, fintek->cir_irq, CIR_CR_IRQ_SEL); |
| |
| fit_dbg("CIR initialized, base io address: 0x%lx, irq: %d (len: %d)", |
| fintek->cir_addr, fintek->cir_irq, fintek->cir_port_len); |
| } |
| |
| /* enable CIR interrupts */ |
| static void fintek_enable_cir_irq(struct fintek_dev *fintek) |
| { |
| fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_EN, CIR_STATUS); |
| } |
| |
| static void fintek_cir_regs_init(struct fintek_dev *fintek) |
| { |
| /* clear any and all stray interrupts */ |
| fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS); |
| |
| /* and finally, enable interrupts */ |
| fintek_enable_cir_irq(fintek); |
| } |
| |
| static void fintek_enable_wake(struct fintek_dev *fintek) |
| { |
| fintek_config_mode_enable(fintek); |
| fintek_select_logical_dev(fintek, LOGICAL_DEV_ACPI); |
| |
| /* Allow CIR PME's to wake system */ |
| fintek_set_reg_bit(fintek, ACPI_WAKE_EN_CIR_BIT, LDEV_ACPI_WAKE_EN_REG); |
| /* Enable CIR PME's */ |
| fintek_set_reg_bit(fintek, ACPI_PME_CIR_BIT, LDEV_ACPI_PME_EN_REG); |
| /* Clear CIR PME status register */ |
| fintek_set_reg_bit(fintek, ACPI_PME_CIR_BIT, LDEV_ACPI_PME_CLR_REG); |
| /* Save state */ |
| fintek_set_reg_bit(fintek, ACPI_STATE_CIR_BIT, LDEV_ACPI_STATE_REG); |
| |
| fintek_config_mode_disable(fintek); |
| } |
| |
| static int fintek_cmdsize(u8 cmd, u8 subcmd) |
| { |
| int datasize = 0; |
| |
| switch (cmd) { |
| case BUF_COMMAND_NULL: |
| if (subcmd == BUF_HW_CMD_HEADER) |
| datasize = 1; |
| break; |
| case BUF_HW_CMD_HEADER: |
| if (subcmd == BUF_CMD_G_REVISION) |
| datasize = 2; |
| break; |
| case BUF_COMMAND_HEADER: |
| switch (subcmd) { |
| case BUF_CMD_S_CARRIER: |
| case BUF_CMD_S_TIMEOUT: |
| case BUF_RSP_PULSE_COUNT: |
| datasize = 2; |
| break; |
| case BUF_CMD_SIG_END: |
| case BUF_CMD_S_TXMASK: |
| case BUF_CMD_S_RXSENSOR: |
| datasize = 1; |
| break; |
| } |
| } |
| |
| return datasize; |
| } |
| |
| /* process ir data stored in driver buffer */ |
| static void fintek_process_rx_ir_data(struct fintek_dev *fintek) |
| { |
| DEFINE_IR_RAW_EVENT(rawir); |
| u8 sample; |
| bool event = false; |
| int i; |
| |
| for (i = 0; i < fintek->pkts; i++) { |
| sample = fintek->buf[i]; |
| switch (fintek->parser_state) { |
| case CMD_HEADER: |
| fintek->cmd = sample; |
| if ((fintek->cmd == BUF_COMMAND_HEADER) || |
| ((fintek->cmd & BUF_COMMAND_MASK) != |
| BUF_PULSE_BIT)) { |
| fintek->parser_state = SUBCMD; |
| continue; |
| } |
| fintek->rem = (fintek->cmd & BUF_LEN_MASK); |
| fit_dbg("%s: rem: 0x%02x", __func__, fintek->rem); |
| if (fintek->rem) |
| fintek->parser_state = PARSE_IRDATA; |
| else |
| ir_raw_event_reset(fintek->rdev); |
| break; |
| case SUBCMD: |
| fintek->rem = fintek_cmdsize(fintek->cmd, sample); |
| fintek->parser_state = CMD_DATA; |
| break; |
| case CMD_DATA: |
| fintek->rem--; |
| break; |
| case PARSE_IRDATA: |
| fintek->rem--; |
| init_ir_raw_event(&rawir); |
| rawir.pulse = ((sample & BUF_PULSE_BIT) != 0); |
| rawir.duration = US_TO_NS((sample & BUF_SAMPLE_MASK) |
| * CIR_SAMPLE_PERIOD); |
| |
| fit_dbg("Storing %s with duration %d", |
| rawir.pulse ? "pulse" : "space", |
| rawir.duration); |
| if (ir_raw_event_store_with_filter(fintek->rdev, |
| &rawir)) |
| event = true; |
| break; |
| } |
| |
| if ((fintek->parser_state != CMD_HEADER) && !fintek->rem) |
| fintek->parser_state = CMD_HEADER; |
| } |
| |
| fintek->pkts = 0; |
| |
| if (event) { |
| fit_dbg("Calling ir_raw_event_handle"); |
| ir_raw_event_handle(fintek->rdev); |
| } |
| } |
| |
| /* copy data from hardware rx register into driver buffer */ |
| static void fintek_get_rx_ir_data(struct fintek_dev *fintek, u8 rx_irqs) |
| { |
| unsigned long flags; |
| u8 sample, status; |
| |
| spin_lock_irqsave(&fintek->fintek_lock, flags); |
| |
| /* |
| * We must read data from CIR_RX_DATA until the hardware IR buffer |
| * is empty and clears the RX_TIMEOUT and/or RX_RECEIVE flags in |
| * the CIR_STATUS register |
| */ |
| do { |
| sample = fintek_cir_reg_read(fintek, CIR_RX_DATA); |
| fit_dbg("%s: sample: 0x%02x", __func__, sample); |
| |
| fintek->buf[fintek->pkts] = sample; |
| fintek->pkts++; |
| |
| status = fintek_cir_reg_read(fintek, CIR_STATUS); |
| if (!(status & CIR_STATUS_IRQ_EN)) |
| break; |
| } while (status & rx_irqs); |
| |
| fintek_process_rx_ir_data(fintek); |
| |
| spin_unlock_irqrestore(&fintek->fintek_lock, flags); |
| } |
| |
| static void fintek_cir_log_irqs(u8 status) |
| { |
| fit_pr(KERN_INFO, "IRQ 0x%02x:%s%s%s%s%s", status, |
| status & CIR_STATUS_IRQ_EN ? " IRQEN" : "", |
| status & CIR_STATUS_TX_FINISH ? " TXF" : "", |
| status & CIR_STATUS_TX_UNDERRUN ? " TXU" : "", |
| status & CIR_STATUS_RX_TIMEOUT ? " RXTO" : "", |
| status & CIR_STATUS_RX_RECEIVE ? " RXOK" : ""); |
| } |
| |
| /* interrupt service routine for incoming and outgoing CIR data */ |
| static irqreturn_t fintek_cir_isr(int irq, void *data) |
| { |
| struct fintek_dev *fintek = data; |
| u8 status, rx_irqs; |
| |
| fit_dbg_verbose("%s firing", __func__); |
| |
| fintek_config_mode_enable(fintek); |
| fintek_select_logical_dev(fintek, fintek->logical_dev_cir); |
| fintek_config_mode_disable(fintek); |
| |
| /* |
| * Get IR Status register contents. Write 1 to ack/clear |
| * |
| * bit: reg name - description |
| * 3: TX_FINISH - TX is finished |
| * 2: TX_UNDERRUN - TX underrun |
| * 1: RX_TIMEOUT - RX data timeout |
| * 0: RX_RECEIVE - RX data received |
| */ |
| status = fintek_cir_reg_read(fintek, CIR_STATUS); |
| if (!(status & CIR_STATUS_IRQ_MASK) || status == 0xff) { |
| fit_dbg_verbose("%s exiting, IRSTS 0x%02x", __func__, status); |
| fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS); |
| return IRQ_RETVAL(IRQ_NONE); |
| } |
| |
| if (debug) |
| fintek_cir_log_irqs(status); |
| |
| rx_irqs = status & (CIR_STATUS_RX_RECEIVE | CIR_STATUS_RX_TIMEOUT); |
| if (rx_irqs) |
| fintek_get_rx_ir_data(fintek, rx_irqs); |
| |
| /* ack/clear all irq flags we've got */ |
| fintek_cir_reg_write(fintek, status, CIR_STATUS); |
| |
| fit_dbg_verbose("%s done", __func__); |
| return IRQ_RETVAL(IRQ_HANDLED); |
| } |
| |
| static void fintek_enable_cir(struct fintek_dev *fintek) |
| { |
| /* set IRQ enabled */ |
| fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_EN, CIR_STATUS); |
| |
| fintek_config_mode_enable(fintek); |
| |
| /* enable the CIR logical device */ |
| fintek_select_logical_dev(fintek, fintek->logical_dev_cir); |
| fintek_cr_write(fintek, LOGICAL_DEV_ENABLE, CIR_CR_DEV_EN); |
| |
| fintek_config_mode_disable(fintek); |
| |
| /* clear all pending interrupts */ |
| fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS); |
| |
| /* enable interrupts */ |
| fintek_enable_cir_irq(fintek); |
| } |
| |
| static void fintek_disable_cir(struct fintek_dev *fintek) |
| { |
| fintek_config_mode_enable(fintek); |
| |
| /* disable the CIR logical device */ |
| fintek_select_logical_dev(fintek, fintek->logical_dev_cir); |
| fintek_cr_write(fintek, LOGICAL_DEV_DISABLE, CIR_CR_DEV_EN); |
| |
| fintek_config_mode_disable(fintek); |
| } |
| |
| static int fintek_open(struct rc_dev *dev) |
| { |
| struct fintek_dev *fintek = dev->priv; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&fintek->fintek_lock, flags); |
| fintek_enable_cir(fintek); |
| spin_unlock_irqrestore(&fintek->fintek_lock, flags); |
| |
| return 0; |
| } |
| |
| static void fintek_close(struct rc_dev *dev) |
| { |
| struct fintek_dev *fintek = dev->priv; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&fintek->fintek_lock, flags); |
| fintek_disable_cir(fintek); |
| spin_unlock_irqrestore(&fintek->fintek_lock, flags); |
| } |
| |
| /* Allocate memory, probe hardware, and initialize everything */ |
| static int fintek_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id) |
| { |
| struct fintek_dev *fintek; |
| struct rc_dev *rdev; |
| int ret = -ENOMEM; |
| |
| fintek = kzalloc(sizeof(struct fintek_dev), GFP_KERNEL); |
| if (!fintek) |
| return ret; |
| |
| /* input device for IR remote (and tx) */ |
| rdev = rc_allocate_device(); |
| if (!rdev) |
| goto failure; |
| |
| ret = -ENODEV; |
| /* validate pnp resources */ |
| if (!pnp_port_valid(pdev, 0)) { |
| dev_err(&pdev->dev, "IR PNP Port not valid!\n"); |
| goto failure; |
| } |
| |
| if (!pnp_irq_valid(pdev, 0)) { |
| dev_err(&pdev->dev, "IR PNP IRQ not valid!\n"); |
| goto failure; |
| } |
| |
| fintek->cir_addr = pnp_port_start(pdev, 0); |
| fintek->cir_irq = pnp_irq(pdev, 0); |
| fintek->cir_port_len = pnp_port_len(pdev, 0); |
| |
| fintek->cr_ip = CR_INDEX_PORT; |
| fintek->cr_dp = CR_DATA_PORT; |
| |
| spin_lock_init(&fintek->fintek_lock); |
| |
| pnp_set_drvdata(pdev, fintek); |
| fintek->pdev = pdev; |
| |
| ret = fintek_hw_detect(fintek); |
| if (ret) |
| goto failure; |
| |
| /* Initialize CIR & CIR Wake Logical Devices */ |
| fintek_config_mode_enable(fintek); |
| fintek_cir_ldev_init(fintek); |
| fintek_config_mode_disable(fintek); |
| |
| /* Initialize CIR & CIR Wake Config Registers */ |
| fintek_cir_regs_init(fintek); |
| |
| /* Set up the rc device */ |
| rdev->priv = fintek; |
| rdev->driver_type = RC_DRIVER_IR_RAW; |
| rdev->allowed_protos = RC_BIT_ALL; |
| rdev->open = fintek_open; |
| rdev->close = fintek_close; |
| rdev->input_name = FINTEK_DESCRIPTION; |
| rdev->input_phys = "fintek/cir0"; |
| rdev->input_id.bustype = BUS_HOST; |
| rdev->input_id.vendor = VENDOR_ID_FINTEK; |
| rdev->input_id.product = fintek->chip_major; |
| rdev->input_id.version = fintek->chip_minor; |
| rdev->dev.parent = &pdev->dev; |
| rdev->driver_name = FINTEK_DRIVER_NAME; |
| rdev->map_name = RC_MAP_RC6_MCE; |
| rdev->timeout = US_TO_NS(1000); |
| /* rx resolution is hardwired to 50us atm, 1, 25, 100 also possible */ |
| rdev->rx_resolution = US_TO_NS(CIR_SAMPLE_PERIOD); |
| |
| ret = -EBUSY; |
| /* now claim resources */ |
| if (!request_region(fintek->cir_addr, |
| fintek->cir_port_len, FINTEK_DRIVER_NAME)) |
| goto failure; |
| |
| if (request_irq(fintek->cir_irq, fintek_cir_isr, IRQF_SHARED, |
| FINTEK_DRIVER_NAME, (void *)fintek)) |
| goto failure2; |
| |
| ret = rc_register_device(rdev); |
| if (ret) |
| goto failure3; |
| |
| device_init_wakeup(&pdev->dev, true); |
| fintek->rdev = rdev; |
| fit_pr(KERN_NOTICE, "driver has been successfully loaded\n"); |
| if (debug) |
| cir_dump_regs(fintek); |
| |
| return 0; |
| |
| failure3: |
| free_irq(fintek->cir_irq, fintek); |
| failure2: |
| release_region(fintek->cir_addr, fintek->cir_port_len); |
| failure: |
| rc_free_device(rdev); |
| kfree(fintek); |
| |
| return ret; |
| } |
| |
| static void fintek_remove(struct pnp_dev *pdev) |
| { |
| struct fintek_dev *fintek = pnp_get_drvdata(pdev); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&fintek->fintek_lock, flags); |
| /* disable CIR */ |
| fintek_disable_cir(fintek); |
| fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS); |
| /* enable CIR Wake (for IR power-on) */ |
| fintek_enable_wake(fintek); |
| spin_unlock_irqrestore(&fintek->fintek_lock, flags); |
| |
| /* free resources */ |
| free_irq(fintek->cir_irq, fintek); |
| release_region(fintek->cir_addr, fintek->cir_port_len); |
| |
| rc_unregister_device(fintek->rdev); |
| |
| kfree(fintek); |
| } |
| |
| static int fintek_suspend(struct pnp_dev *pdev, pm_message_t state) |
| { |
| struct fintek_dev *fintek = pnp_get_drvdata(pdev); |
| unsigned long flags; |
| |
| fit_dbg("%s called", __func__); |
| |
| spin_lock_irqsave(&fintek->fintek_lock, flags); |
| |
| /* disable all CIR interrupts */ |
| fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS); |
| |
| spin_unlock_irqrestore(&fintek->fintek_lock, flags); |
| |
| fintek_config_mode_enable(fintek); |
| |
| /* disable cir logical dev */ |
| fintek_select_logical_dev(fintek, fintek->logical_dev_cir); |
| fintek_cr_write(fintek, LOGICAL_DEV_DISABLE, CIR_CR_DEV_EN); |
| |
| fintek_config_mode_disable(fintek); |
| |
| /* make sure wake is enabled */ |
| fintek_enable_wake(fintek); |
| |
| return 0; |
| } |
| |
| static int fintek_resume(struct pnp_dev *pdev) |
| { |
| int ret = 0; |
| struct fintek_dev *fintek = pnp_get_drvdata(pdev); |
| |
| fit_dbg("%s called", __func__); |
| |
| /* open interrupt */ |
| fintek_enable_cir_irq(fintek); |
| |
| /* Enable CIR logical device */ |
| fintek_config_mode_enable(fintek); |
| fintek_select_logical_dev(fintek, fintek->logical_dev_cir); |
| fintek_cr_write(fintek, LOGICAL_DEV_ENABLE, CIR_CR_DEV_EN); |
| |
| fintek_config_mode_disable(fintek); |
| |
| fintek_cir_regs_init(fintek); |
| |
| return ret; |
| } |
| |
| static void fintek_shutdown(struct pnp_dev *pdev) |
| { |
| struct fintek_dev *fintek = pnp_get_drvdata(pdev); |
| fintek_enable_wake(fintek); |
| } |
| |
| static const struct pnp_device_id fintek_ids[] = { |
| { "FIT0002", 0 }, /* CIR */ |
| { "", 0 }, |
| }; |
| |
| static struct pnp_driver fintek_driver = { |
| .name = FINTEK_DRIVER_NAME, |
| .id_table = fintek_ids, |
| .flags = PNP_DRIVER_RES_DO_NOT_CHANGE, |
| .probe = fintek_probe, |
| .remove = fintek_remove, |
| .suspend = fintek_suspend, |
| .resume = fintek_resume, |
| .shutdown = fintek_shutdown, |
| }; |
| |
| static int fintek_init(void) |
| { |
| return pnp_register_driver(&fintek_driver); |
| } |
| |
| static void fintek_exit(void) |
| { |
| pnp_unregister_driver(&fintek_driver); |
| } |
| |
| module_param(debug, int, S_IRUGO | S_IWUSR); |
| MODULE_PARM_DESC(debug, "Enable debugging output"); |
| |
| MODULE_DEVICE_TABLE(pnp, fintek_ids); |
| MODULE_DESCRIPTION(FINTEK_DESCRIPTION " driver"); |
| |
| MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>"); |
| MODULE_LICENSE("GPL"); |
| |
| module_init(fintek_init); |
| module_exit(fintek_exit); |