| /* |
| * AXP20x regulators driver. |
| * |
| * Copyright (C) 2013 Carlo Caione <carlo@caione.org> |
| * |
| * This file is subject to the terms and conditions of the GNU General |
| * Public License. See the file "COPYING" in the main directory of this |
| * archive for more details. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/mfd/axp20x.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/of_regulator.h> |
| |
| #define AXP20X_IO_ENABLED 0x03 |
| #define AXP20X_IO_DISABLED 0x07 |
| |
| #define AXP20X_WORKMODE_DCDC2_MASK BIT(2) |
| #define AXP20X_WORKMODE_DCDC3_MASK BIT(1) |
| |
| #define AXP20X_FREQ_DCDC_MASK 0x0f |
| |
| #define AXP20X_DESC_IO(_id, _supply, _min, _max, _step, _vreg, _vmask, _ereg, \ |
| _emask, _enable_val, _disable_val) \ |
| [AXP20X_##_id] = { \ |
| .name = #_id, \ |
| .supply_name = (_supply), \ |
| .type = REGULATOR_VOLTAGE, \ |
| .id = AXP20X_##_id, \ |
| .n_voltages = (((_max) - (_min)) / (_step) + 1), \ |
| .owner = THIS_MODULE, \ |
| .min_uV = (_min) * 1000, \ |
| .uV_step = (_step) * 1000, \ |
| .vsel_reg = (_vreg), \ |
| .vsel_mask = (_vmask), \ |
| .enable_reg = (_ereg), \ |
| .enable_mask = (_emask), \ |
| .enable_val = (_enable_val), \ |
| .disable_val = (_disable_val), \ |
| .ops = &axp20x_ops, \ |
| } |
| |
| #define AXP20X_DESC(_id, _supply, _min, _max, _step, _vreg, _vmask, _ereg, \ |
| _emask) \ |
| [AXP20X_##_id] = { \ |
| .name = #_id, \ |
| .supply_name = (_supply), \ |
| .type = REGULATOR_VOLTAGE, \ |
| .id = AXP20X_##_id, \ |
| .n_voltages = (((_max) - (_min)) / (_step) + 1), \ |
| .owner = THIS_MODULE, \ |
| .min_uV = (_min) * 1000, \ |
| .uV_step = (_step) * 1000, \ |
| .vsel_reg = (_vreg), \ |
| .vsel_mask = (_vmask), \ |
| .enable_reg = (_ereg), \ |
| .enable_mask = (_emask), \ |
| .ops = &axp20x_ops, \ |
| } |
| |
| #define AXP20X_DESC_FIXED(_id, _supply, _volt) \ |
| [AXP20X_##_id] = { \ |
| .name = #_id, \ |
| .supply_name = (_supply), \ |
| .type = REGULATOR_VOLTAGE, \ |
| .id = AXP20X_##_id, \ |
| .n_voltages = 1, \ |
| .owner = THIS_MODULE, \ |
| .min_uV = (_volt) * 1000, \ |
| .ops = &axp20x_ops_fixed \ |
| } |
| |
| #define AXP20X_DESC_TABLE(_id, _supply, _table, _vreg, _vmask, _ereg, _emask) \ |
| [AXP20X_##_id] = { \ |
| .name = #_id, \ |
| .supply_name = (_supply), \ |
| .type = REGULATOR_VOLTAGE, \ |
| .id = AXP20X_##_id, \ |
| .n_voltages = ARRAY_SIZE(_table), \ |
| .owner = THIS_MODULE, \ |
| .vsel_reg = (_vreg), \ |
| .vsel_mask = (_vmask), \ |
| .enable_reg = (_ereg), \ |
| .enable_mask = (_emask), \ |
| .volt_table = (_table), \ |
| .ops = &axp20x_ops_table, \ |
| } |
| |
| static const int axp20x_ldo4_data[] = { 1250000, 1300000, 1400000, 1500000, 1600000, |
| 1700000, 1800000, 1900000, 2000000, 2500000, |
| 2700000, 2800000, 3000000, 3100000, 3200000, |
| 3300000 }; |
| |
| static struct regulator_ops axp20x_ops_fixed = { |
| .list_voltage = regulator_list_voltage_linear, |
| }; |
| |
| static struct regulator_ops axp20x_ops_table = { |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .list_voltage = regulator_list_voltage_table, |
| .map_voltage = regulator_map_voltage_ascend, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| }; |
| |
| static struct regulator_ops axp20x_ops = { |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .list_voltage = regulator_list_voltage_linear, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| }; |
| |
| static const struct regulator_desc axp20x_regulators[] = { |
| AXP20X_DESC(DCDC2, "vin2", 700, 2275, 25, AXP20X_DCDC2_V_OUT, 0x3f, |
| AXP20X_PWR_OUT_CTRL, 0x10), |
| AXP20X_DESC(DCDC3, "vin3", 700, 3500, 25, AXP20X_DCDC3_V_OUT, 0x7f, |
| AXP20X_PWR_OUT_CTRL, 0x02), |
| AXP20X_DESC_FIXED(LDO1, "acin", 1300), |
| AXP20X_DESC(LDO2, "ldo24in", 1800, 3300, 100, AXP20X_LDO24_V_OUT, 0xf0, |
| AXP20X_PWR_OUT_CTRL, 0x04), |
| AXP20X_DESC(LDO3, "ldo3in", 700, 3500, 25, AXP20X_LDO3_V_OUT, 0x7f, |
| AXP20X_PWR_OUT_CTRL, 0x40), |
| AXP20X_DESC_TABLE(LDO4, "ldo24in", axp20x_ldo4_data, AXP20X_LDO24_V_OUT, 0x0f, |
| AXP20X_PWR_OUT_CTRL, 0x08), |
| AXP20X_DESC_IO(LDO5, "ldo5in", 1800, 3300, 100, AXP20X_LDO5_V_OUT, 0xf0, |
| AXP20X_GPIO0_CTRL, 0x07, AXP20X_IO_ENABLED, |
| AXP20X_IO_DISABLED), |
| }; |
| |
| #define AXP_MATCH(_name, _id) \ |
| [AXP20X_##_id] = { \ |
| .name = #_name, \ |
| .driver_data = (void *) &axp20x_regulators[AXP20X_##_id], \ |
| } |
| |
| static struct of_regulator_match axp20x_matches[] = { |
| AXP_MATCH(dcdc2, DCDC2), |
| AXP_MATCH(dcdc3, DCDC3), |
| AXP_MATCH(ldo1, LDO1), |
| AXP_MATCH(ldo2, LDO2), |
| AXP_MATCH(ldo3, LDO3), |
| AXP_MATCH(ldo4, LDO4), |
| AXP_MATCH(ldo5, LDO5), |
| }; |
| |
| static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq) |
| { |
| struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); |
| |
| if (dcdcfreq < 750) { |
| dcdcfreq = 750; |
| dev_warn(&pdev->dev, "DCDC frequency too low. Set to 750kHz\n"); |
| } |
| |
| if (dcdcfreq > 1875) { |
| dcdcfreq = 1875; |
| dev_warn(&pdev->dev, "DCDC frequency too high. Set to 1875kHz\n"); |
| } |
| |
| dcdcfreq = (dcdcfreq - 750) / 75; |
| |
| return regmap_update_bits(axp20x->regmap, AXP20X_DCDC_FREQ, |
| AXP20X_FREQ_DCDC_MASK, dcdcfreq); |
| } |
| |
| static int axp20x_regulator_parse_dt(struct platform_device *pdev) |
| { |
| struct device_node *np, *regulators; |
| int ret; |
| u32 dcdcfreq; |
| |
| np = of_node_get(pdev->dev.parent->of_node); |
| if (!np) |
| return 0; |
| |
| regulators = of_get_child_by_name(np, "regulators"); |
| if (!regulators) { |
| dev_warn(&pdev->dev, "regulators node not found\n"); |
| } else { |
| ret = of_regulator_match(&pdev->dev, regulators, axp20x_matches, |
| ARRAY_SIZE(axp20x_matches)); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", ret); |
| return ret; |
| } |
| |
| dcdcfreq = 1500; |
| of_property_read_u32(regulators, "x-powers,dcdc-freq", &dcdcfreq); |
| ret = axp20x_set_dcdc_freq(pdev, dcdcfreq); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Error setting dcdc frequency: %d\n", ret); |
| return ret; |
| } |
| |
| of_node_put(regulators); |
| } |
| |
| return 0; |
| } |
| |
| static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 workmode) |
| { |
| unsigned int mask = AXP20X_WORKMODE_DCDC2_MASK; |
| |
| if ((id != AXP20X_DCDC2) && (id != AXP20X_DCDC3)) |
| return -EINVAL; |
| |
| if (id == AXP20X_DCDC3) |
| mask = AXP20X_WORKMODE_DCDC3_MASK; |
| |
| workmode <<= ffs(mask) - 1; |
| |
| return regmap_update_bits(rdev->regmap, AXP20X_DCDC_MODE, mask, workmode); |
| } |
| |
| static int axp20x_regulator_probe(struct platform_device *pdev) |
| { |
| struct regulator_dev *rdev; |
| struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); |
| struct regulator_config config = { }; |
| struct regulator_init_data *init_data; |
| int ret, i; |
| u32 workmode; |
| |
| ret = axp20x_regulator_parse_dt(pdev); |
| if (ret) |
| return ret; |
| |
| for (i = 0; i < AXP20X_REG_ID_MAX; i++) { |
| init_data = axp20x_matches[i].init_data; |
| |
| config.dev = pdev->dev.parent; |
| config.init_data = init_data; |
| config.regmap = axp20x->regmap; |
| config.of_node = axp20x_matches[i].of_node; |
| |
| rdev = devm_regulator_register(&pdev->dev, &axp20x_regulators[i], |
| &config); |
| if (IS_ERR(rdev)) { |
| dev_err(&pdev->dev, "Failed to register %s\n", |
| axp20x_regulators[i].name); |
| |
| return PTR_ERR(rdev); |
| } |
| |
| ret = of_property_read_u32(axp20x_matches[i].of_node, "x-powers,dcdc-workmode", |
| &workmode); |
| if (!ret) { |
| if (axp20x_set_dcdc_workmode(rdev, i, workmode)) |
| dev_err(&pdev->dev, "Failed to set workmode on %s\n", |
| axp20x_regulators[i].name); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static struct platform_driver axp20x_regulator_driver = { |
| .probe = axp20x_regulator_probe, |
| .driver = { |
| .name = "axp20x-regulator", |
| }, |
| }; |
| |
| module_platform_driver(axp20x_regulator_driver); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR("Carlo Caione <carlo@caione.org>"); |
| MODULE_DESCRIPTION("Regulator Driver for AXP20X PMIC"); |