| /* |
| * Copyright (c) 2013 Samsung Electronics Co., Ltd. |
| * Copyright (c) 2013 Linaro Ltd. |
| * Author: Thomas Abraham <thomas.ab@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Common Clock Framework support for Exynos5250 SoC. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/clkdev.h> |
| #include <linux/clk-provider.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| |
| #include "clk.h" |
| #include "clk-pll.h" |
| |
| #define SRC_CPU 0x200 |
| #define DIV_CPU0 0x500 |
| #define SRC_CORE1 0x4204 |
| #define SRC_TOP0 0x10210 |
| #define SRC_TOP2 0x10218 |
| #define SRC_GSCL 0x10220 |
| #define SRC_DISP1_0 0x1022c |
| #define SRC_MAU 0x10240 |
| #define SRC_FSYS 0x10244 |
| #define SRC_GEN 0x10248 |
| #define SRC_PERIC0 0x10250 |
| #define SRC_PERIC1 0x10254 |
| #define SRC_MASK_GSCL 0x10320 |
| #define SRC_MASK_DISP1_0 0x1032c |
| #define SRC_MASK_MAU 0x10334 |
| #define SRC_MASK_FSYS 0x10340 |
| #define SRC_MASK_GEN 0x10344 |
| #define SRC_MASK_PERIC0 0x10350 |
| #define SRC_MASK_PERIC1 0x10354 |
| #define DIV_TOP0 0x10510 |
| #define DIV_TOP1 0x10514 |
| #define DIV_GSCL 0x10520 |
| #define DIV_DISP1_0 0x1052c |
| #define DIV_GEN 0x1053c |
| #define DIV_MAU 0x10544 |
| #define DIV_FSYS0 0x10548 |
| #define DIV_FSYS1 0x1054c |
| #define DIV_FSYS2 0x10550 |
| #define DIV_PERIC0 0x10558 |
| #define DIV_PERIC1 0x1055c |
| #define DIV_PERIC2 0x10560 |
| #define DIV_PERIC3 0x10564 |
| #define DIV_PERIC4 0x10568 |
| #define DIV_PERIC5 0x1056c |
| #define GATE_IP_GSCL 0x10920 |
| #define GATE_IP_MFC 0x1092c |
| #define GATE_IP_GEN 0x10934 |
| #define GATE_IP_FSYS 0x10944 |
| #define GATE_IP_PERIC 0x10950 |
| #define GATE_IP_PERIS 0x10960 |
| #define SRC_CDREX 0x20200 |
| #define PLL_DIV2_SEL 0x20a24 |
| #define GATE_IP_DISP1 0x10928 |
| |
| /* |
| * Let each supported clock get a unique id. This id is used to lookup the clock |
| * for device tree based platforms. The clocks are categorized into three |
| * sections: core, sclk gate and bus interface gate clocks. |
| * |
| * When adding a new clock to this list, it is advised to choose a clock |
| * category and add it to the end of that category. That is because the the |
| * device tree source file is referring to these ids and any change in the |
| * sequence number of existing clocks will require corresponding change in the |
| * device tree files. This limitation would go away when pre-processor support |
| * for dtc would be available. |
| */ |
| enum exynos5250_clks { |
| none, |
| |
| /* core clocks */ |
| fin_pll, |
| |
| /* gate for special clocks (sclk) */ |
| sclk_cam_bayer = 128, sclk_cam0, sclk_cam1, sclk_gscl_wa, sclk_gscl_wb, |
| sclk_fimd1, sclk_mipi1, sclk_dp, sclk_hdmi, sclk_pixel, sclk_audio0, |
| sclk_mmc0, sclk_mmc1, sclk_mmc2, sclk_mmc3, sclk_sata, sclk_usb3, |
| sclk_jpeg, sclk_uart0, sclk_uart1, sclk_uart2, sclk_uart3, sclk_pwm, |
| sclk_audio1, sclk_audio2, sclk_spdif, sclk_spi0, sclk_spi1, sclk_spi2, |
| div_i2s1, div_i2s2, |
| |
| /* gate clocks */ |
| gscl0 = 256, gscl1, gscl2, gscl3, gscl_wa, gscl_wb, smmu_gscl0, |
| smmu_gscl1, smmu_gscl2, smmu_gscl3, mfc, smmu_mfcl, smmu_mfcr, rotator, |
| jpeg, mdma1, smmu_rotator, smmu_jpeg, smmu_mdma1, pdma0, pdma1, sata, |
| usbotg, mipi_hsi, sdmmc0, sdmmc1, sdmmc2, sdmmc3, sromc, usb2, usb3, |
| sata_phyctrl, sata_phyi2c, uart0, uart1, uart2, uart3, uart4, i2c0, |
| i2c1, i2c2, i2c3, i2c4, i2c5, i2c6, i2c7, i2c_hdmi, adc, spi0, spi1, |
| spi2, i2s1, i2s2, pcm1, pcm2, pwm, spdif, ac97, hsi2c0, hsi2c1, hsi2c2, |
| hsi2c3, chipid, sysreg, pmu, cmu_top, cmu_core, cmu_mem, tzpc0, tzpc1, |
| tzpc2, tzpc3, tzpc4, tzpc5, tzpc6, tzpc7, tzpc8, tzpc9, hdmi_cec, mct, |
| wdt, rtc, tmu, fimd1, mie1, dsim0, dp, mixer, hdmi, |
| |
| nr_clks, |
| }; |
| |
| /* |
| * list of controller registers to be saved and restored during a |
| * suspend/resume cycle. |
| */ |
| static __initdata unsigned long exynos5250_clk_regs[] = { |
| SRC_CPU, |
| DIV_CPU0, |
| SRC_CORE1, |
| SRC_TOP0, |
| SRC_TOP2, |
| SRC_GSCL, |
| SRC_DISP1_0, |
| SRC_MAU, |
| SRC_FSYS, |
| SRC_GEN, |
| SRC_PERIC0, |
| SRC_PERIC1, |
| SRC_MASK_GSCL, |
| SRC_MASK_DISP1_0, |
| SRC_MASK_MAU, |
| SRC_MASK_FSYS, |
| SRC_MASK_GEN, |
| SRC_MASK_PERIC0, |
| SRC_MASK_PERIC1, |
| DIV_TOP0, |
| DIV_TOP1, |
| DIV_GSCL, |
| DIV_DISP1_0, |
| DIV_GEN, |
| DIV_MAU, |
| DIV_FSYS0, |
| DIV_FSYS1, |
| DIV_FSYS2, |
| DIV_PERIC0, |
| DIV_PERIC1, |
| DIV_PERIC2, |
| DIV_PERIC3, |
| DIV_PERIC4, |
| DIV_PERIC5, |
| GATE_IP_GSCL, |
| GATE_IP_MFC, |
| GATE_IP_GEN, |
| GATE_IP_FSYS, |
| GATE_IP_PERIC, |
| GATE_IP_PERIS, |
| SRC_CDREX, |
| PLL_DIV2_SEL, |
| GATE_IP_DISP1, |
| }; |
| |
| /* list of all parent clock list */ |
| PNAME(mout_apll_p) = { "fin_pll", "fout_apll", }; |
| PNAME(mout_cpu_p) = { "mout_apll", "sclk_mpll", }; |
| PNAME(mout_mpll_fout_p) = { "fout_mplldiv2", "fout_mpll" }; |
| PNAME(mout_mpll_p) = { "fin_pll", "mout_mpll_fout" }; |
| PNAME(mout_bpll_fout_p) = { "fout_bplldiv2", "fout_bpll" }; |
| PNAME(mout_bpll_p) = { "fin_pll", "mout_bpll_fout" }; |
| PNAME(mout_vpllsrc_p) = { "fin_pll", "sclk_hdmi27m" }; |
| PNAME(mout_vpll_p) = { "mout_vpllsrc", "fout_vpll" }; |
| PNAME(mout_cpll_p) = { "fin_pll", "fout_cpll" }; |
| PNAME(mout_epll_p) = { "fin_pll", "fout_epll" }; |
| PNAME(mout_mpll_user_p) = { "fin_pll", "sclk_mpll" }; |
| PNAME(mout_bpll_user_p) = { "fin_pll", "sclk_bpll" }; |
| PNAME(mout_aclk166_p) = { "sclk_cpll", "sclk_mpll_user" }; |
| PNAME(mout_aclk200_p) = { "sclk_mpll_user", "sclk_bpll_user" }; |
| PNAME(mout_hdmi_p) = { "div_hdmi_pixel", "sclk_hdmiphy" }; |
| PNAME(mout_usb3_p) = { "sclk_mpll_user", "sclk_cpll" }; |
| PNAME(mout_group1_p) = { "fin_pll", "fin_pll", "sclk_hdmi27m", |
| "sclk_dptxphy", "sclk_uhostphy", "sclk_hdmiphy", |
| "sclk_mpll_user", "sclk_epll", "sclk_vpll", |
| "sclk_cpll" }; |
| PNAME(mout_audio0_p) = { "cdclk0", "fin_pll", "sclk_hdmi27m", "sclk_dptxphy", |
| "sclk_uhostphy", "sclk_hdmiphy", |
| "sclk_mpll_user", "sclk_epll", "sclk_vpll", |
| "sclk_cpll" }; |
| PNAME(mout_audio1_p) = { "cdclk1", "fin_pll", "sclk_hdmi27m", "sclk_dptxphy", |
| "sclk_uhostphy", "sclk_hdmiphy", |
| "sclk_mpll_user", "sclk_epll", "sclk_vpll", |
| "sclk_cpll" }; |
| PNAME(mout_audio2_p) = { "cdclk2", "fin_pll", "sclk_hdmi27m", "sclk_dptxphy", |
| "sclk_uhostphy", "sclk_hdmiphy", |
| "sclk_mpll_user", "sclk_epll", "sclk_vpll", |
| "sclk_cpll" }; |
| PNAME(mout_spdif_p) = { "sclk_audio0", "sclk_audio1", "sclk_audio2", |
| "spdif_extclk" }; |
| |
| /* fixed rate clocks generated outside the soc */ |
| struct samsung_fixed_rate_clock exynos5250_fixed_rate_ext_clks[] __initdata = { |
| FRATE(fin_pll, "fin_pll", NULL, CLK_IS_ROOT, 0), |
| }; |
| |
| /* fixed rate clocks generated inside the soc */ |
| struct samsung_fixed_rate_clock exynos5250_fixed_rate_clks[] __initdata = { |
| FRATE(none, "sclk_hdmiphy", NULL, CLK_IS_ROOT, 24000000), |
| FRATE(none, "sclk_hdmi27m", NULL, CLK_IS_ROOT, 27000000), |
| FRATE(none, "sclk_dptxphy", NULL, CLK_IS_ROOT, 24000000), |
| FRATE(none, "sclk_uhostphy", NULL, CLK_IS_ROOT, 48000000), |
| }; |
| |
| struct samsung_fixed_factor_clock exynos5250_fixed_factor_clks[] __initdata = { |
| FFACTOR(none, "fout_mplldiv2", "fout_mpll", 1, 2, 0), |
| FFACTOR(none, "fout_bplldiv2", "fout_bpll", 1, 2, 0), |
| }; |
| |
| struct samsung_mux_clock exynos5250_mux_clks[] __initdata = { |
| MUX_A(none, "mout_apll", mout_apll_p, SRC_CPU, 0, 1, "mout_apll"), |
| MUX_A(none, "mout_cpu", mout_cpu_p, SRC_CPU, 16, 1, "mout_cpu"), |
| MUX(none, "mout_mpll_fout", mout_mpll_fout_p, PLL_DIV2_SEL, 4, 1), |
| MUX_A(none, "sclk_mpll", mout_mpll_p, SRC_CORE1, 8, 1, "mout_mpll"), |
| MUX(none, "mout_bpll_fout", mout_bpll_fout_p, PLL_DIV2_SEL, 0, 1), |
| MUX(none, "sclk_bpll", mout_bpll_p, SRC_CDREX, 0, 1), |
| MUX(none, "mout_vpllsrc", mout_vpllsrc_p, SRC_TOP2, 0, 1), |
| MUX(none, "sclk_vpll", mout_vpll_p, SRC_TOP2, 16, 1), |
| MUX(none, "sclk_epll", mout_epll_p, SRC_TOP2, 12, 1), |
| MUX(none, "sclk_cpll", mout_cpll_p, SRC_TOP2, 8, 1), |
| MUX(none, "sclk_mpll_user", mout_mpll_user_p, SRC_TOP2, 20, 1), |
| MUX(none, "sclk_bpll_user", mout_bpll_user_p, SRC_TOP2, 24, 1), |
| MUX(none, "mout_aclk166", mout_aclk166_p, SRC_TOP0, 8, 1), |
| MUX(none, "mout_aclk333", mout_aclk166_p, SRC_TOP0, 16, 1), |
| MUX(none, "mout_aclk200", mout_aclk200_p, SRC_TOP0, 12, 1), |
| MUX(none, "mout_cam_bayer", mout_group1_p, SRC_GSCL, 12, 4), |
| MUX(none, "mout_cam0", mout_group1_p, SRC_GSCL, 16, 4), |
| MUX(none, "mout_cam1", mout_group1_p, SRC_GSCL, 20, 4), |
| MUX(none, "mout_gscl_wa", mout_group1_p, SRC_GSCL, 24, 4), |
| MUX(none, "mout_gscl_wb", mout_group1_p, SRC_GSCL, 28, 4), |
| MUX(none, "mout_fimd1", mout_group1_p, SRC_DISP1_0, 0, 4), |
| MUX(none, "mout_mipi1", mout_group1_p, SRC_DISP1_0, 12, 4), |
| MUX(none, "mout_dp", mout_group1_p, SRC_DISP1_0, 16, 4), |
| MUX(none, "mout_hdmi", mout_hdmi_p, SRC_DISP1_0, 20, 1), |
| MUX(none, "mout_audio0", mout_audio0_p, SRC_MAU, 0, 4), |
| MUX(none, "mout_mmc0", mout_group1_p, SRC_FSYS, 0, 4), |
| MUX(none, "mout_mmc1", mout_group1_p, SRC_FSYS, 4, 4), |
| MUX(none, "mout_mmc2", mout_group1_p, SRC_FSYS, 8, 4), |
| MUX(none, "mout_mmc3", mout_group1_p, SRC_FSYS, 12, 4), |
| MUX(none, "mout_sata", mout_aclk200_p, SRC_FSYS, 24, 1), |
| MUX(none, "mout_usb3", mout_usb3_p, SRC_FSYS, 28, 1), |
| MUX(none, "mout_jpeg", mout_group1_p, SRC_GEN, 0, 4), |
| MUX(none, "mout_uart0", mout_group1_p, SRC_PERIC0, 0, 4), |
| MUX(none, "mout_uart1", mout_group1_p, SRC_PERIC0, 4, 4), |
| MUX(none, "mout_uart2", mout_group1_p, SRC_PERIC0, 8, 4), |
| MUX(none, "mout_uart3", mout_group1_p, SRC_PERIC0, 12, 4), |
| MUX(none, "mout_pwm", mout_group1_p, SRC_PERIC0, 24, 4), |
| MUX(none, "mout_audio1", mout_audio1_p, SRC_PERIC1, 0, 4), |
| MUX(none, "mout_audio2", mout_audio2_p, SRC_PERIC1, 4, 4), |
| MUX(none, "mout_spdif", mout_spdif_p, SRC_PERIC1, 8, 2), |
| MUX(none, "mout_spi0", mout_group1_p, SRC_PERIC1, 16, 4), |
| MUX(none, "mout_spi1", mout_group1_p, SRC_PERIC1, 20, 4), |
| MUX(none, "mout_spi2", mout_group1_p, SRC_PERIC1, 24, 4), |
| }; |
| |
| struct samsung_div_clock exynos5250_div_clks[] __initdata = { |
| DIV(none, "div_arm", "mout_cpu", DIV_CPU0, 0, 3), |
| DIV(none, "sclk_apll", "mout_apll", DIV_CPU0, 24, 3), |
| DIV(none, "aclk66_pre", "sclk_mpll_user", DIV_TOP1, 24, 3), |
| DIV(none, "aclk66", "aclk66_pre", DIV_TOP0, 0, 3), |
| DIV(none, "aclk266", "sclk_mpll_user", DIV_TOP0, 16, 3), |
| DIV(none, "aclk166", "mout_aclk166", DIV_TOP0, 8, 3), |
| DIV(none, "aclk333", "mout_aclk333", DIV_TOP0, 20, 3), |
| DIV(none, "aclk200", "mout_aclk200", DIV_TOP0, 12, 3), |
| DIV(none, "div_cam_bayer", "mout_cam_bayer", DIV_GSCL, 12, 4), |
| DIV(none, "div_cam0", "mout_cam0", DIV_GSCL, 16, 4), |
| DIV(none, "div_cam1", "mout_cam1", DIV_GSCL, 20, 4), |
| DIV(none, "div_gscl_wa", "mout_gscl_wa", DIV_GSCL, 24, 4), |
| DIV(none, "div_gscl_wb", "mout_gscl_wb", DIV_GSCL, 28, 4), |
| DIV(none, "div_fimd1", "mout_fimd1", DIV_DISP1_0, 0, 4), |
| DIV(none, "div_mipi1", "mout_mipi1", DIV_DISP1_0, 16, 4), |
| DIV(none, "div_dp", "mout_dp", DIV_DISP1_0, 24, 4), |
| DIV(none, "div_jpeg", "mout_jpeg", DIV_GEN, 4, 4), |
| DIV(none, "div_audio0", "mout_audio0", DIV_MAU, 0, 4), |
| DIV(none, "div_pcm0", "sclk_audio0", DIV_MAU, 4, 8), |
| DIV(none, "div_sata", "mout_sata", DIV_FSYS0, 20, 4), |
| DIV(none, "div_usb3", "mout_usb3", DIV_FSYS0, 24, 4), |
| DIV(none, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4), |
| DIV(none, "div_mmc1", "mout_mmc1", DIV_FSYS1, 16, 4), |
| DIV(none, "div_mmc2", "mout_mmc2", DIV_FSYS2, 0, 4), |
| DIV(none, "div_mmc3", "mout_mmc3", DIV_FSYS2, 16, 4), |
| DIV(none, "div_uart0", "mout_uart0", DIV_PERIC0, 0, 4), |
| DIV(none, "div_uart1", "mout_uart1", DIV_PERIC0, 4, 4), |
| DIV(none, "div_uart2", "mout_uart2", DIV_PERIC0, 8, 4), |
| DIV(none, "div_uart3", "mout_uart3", DIV_PERIC0, 12, 4), |
| DIV(none, "div_spi0", "mout_spi0", DIV_PERIC1, 0, 4), |
| DIV(none, "div_spi1", "mout_spi1", DIV_PERIC1, 16, 4), |
| DIV(none, "div_spi2", "mout_spi2", DIV_PERIC2, 0, 4), |
| DIV(none, "div_pwm", "mout_pwm", DIV_PERIC3, 0, 4), |
| DIV(none, "div_audio1", "mout_audio1", DIV_PERIC4, 0, 4), |
| DIV(none, "div_pcm1", "sclk_audio1", DIV_PERIC4, 4, 8), |
| DIV(none, "div_audio2", "mout_audio2", DIV_PERIC4, 16, 4), |
| DIV(none, "div_pcm2", "sclk_audio2", DIV_PERIC4, 20, 8), |
| DIV(div_i2s1, "div_i2s1", "sclk_audio1", DIV_PERIC5, 0, 6), |
| DIV(div_i2s2, "div_i2s2", "sclk_audio2", DIV_PERIC5, 8, 6), |
| DIV(sclk_pixel, "div_hdmi_pixel", "sclk_vpll", DIV_DISP1_0, 28, 4), |
| DIV_A(none, "armclk", "div_arm", DIV_CPU0, 28, 3, "armclk"), |
| DIV_F(none, "div_mipi1_pre", "div_mipi1", |
| DIV_DISP1_0, 20, 4, CLK_SET_RATE_PARENT, 0), |
| DIV_F(none, "div_mmc_pre0", "div_mmc0", |
| DIV_FSYS1, 8, 8, CLK_SET_RATE_PARENT, 0), |
| DIV_F(none, "div_mmc_pre1", "div_mmc1", |
| DIV_FSYS1, 24, 8, CLK_SET_RATE_PARENT, 0), |
| DIV_F(none, "div_mmc_pre2", "div_mmc2", |
| DIV_FSYS2, 8, 8, CLK_SET_RATE_PARENT, 0), |
| DIV_F(none, "div_mmc_pre3", "div_mmc3", |
| DIV_FSYS2, 24, 8, CLK_SET_RATE_PARENT, 0), |
| DIV_F(none, "div_spi_pre0", "div_spi0", |
| DIV_PERIC1, 8, 8, CLK_SET_RATE_PARENT, 0), |
| DIV_F(none, "div_spi_pre1", "div_spi1", |
| DIV_PERIC1, 24, 8, CLK_SET_RATE_PARENT, 0), |
| DIV_F(none, "div_spi_pre2", "div_spi2", |
| DIV_PERIC2, 8, 8, CLK_SET_RATE_PARENT, 0), |
| }; |
| |
| struct samsung_gate_clock exynos5250_gate_clks[] __initdata = { |
| GATE(gscl0, "gscl0", "none", GATE_IP_GSCL, 0, 0, 0), |
| GATE(gscl1, "gscl1", "none", GATE_IP_GSCL, 1, 0, 0), |
| GATE(gscl2, "gscl2", "aclk266", GATE_IP_GSCL, 2, 0, 0), |
| GATE(gscl3, "gscl3", "aclk266", GATE_IP_GSCL, 3, 0, 0), |
| GATE(gscl_wa, "gscl_wa", "div_gscl_wa", GATE_IP_GSCL, 5, 0, 0), |
| GATE(gscl_wb, "gscl_wb", "div_gscl_wb", GATE_IP_GSCL, 6, 0, 0), |
| GATE(smmu_gscl0, "smmu_gscl0", "aclk266", GATE_IP_GSCL, 7, 0, 0), |
| GATE(smmu_gscl1, "smmu_gscl1", "aclk266", GATE_IP_GSCL, 8, 0, 0), |
| GATE(smmu_gscl2, "smmu_gscl2", "aclk266", GATE_IP_GSCL, 9, 0, 0), |
| GATE(smmu_gscl3, "smmu_gscl3", "aclk266", GATE_IP_GSCL, 10, 0, 0), |
| GATE(mfc, "mfc", "aclk333", GATE_IP_MFC, 0, 0, 0), |
| GATE(smmu_mfcl, "smmu_mfcl", "aclk333", GATE_IP_MFC, 1, 0, 0), |
| GATE(smmu_mfcr, "smmu_mfcr", "aclk333", GATE_IP_MFC, 2, 0, 0), |
| GATE(rotator, "rotator", "aclk266", GATE_IP_GEN, 1, 0, 0), |
| GATE(jpeg, "jpeg", "aclk166", GATE_IP_GEN, 2, 0, 0), |
| GATE(mdma1, "mdma1", "aclk266", GATE_IP_GEN, 4, 0, 0), |
| GATE(smmu_rotator, "smmu_rotator", "aclk266", GATE_IP_GEN, 6, 0, 0), |
| GATE(smmu_jpeg, "smmu_jpeg", "aclk166", GATE_IP_GEN, 7, 0, 0), |
| GATE(smmu_mdma1, "smmu_mdma1", "aclk266", GATE_IP_GEN, 9, 0, 0), |
| GATE(pdma0, "pdma0", "aclk200", GATE_IP_FSYS, 1, 0, 0), |
| GATE(pdma1, "pdma1", "aclk200", GATE_IP_FSYS, 2, 0, 0), |
| GATE(sata, "sata", "aclk200", GATE_IP_FSYS, 6, 0, 0), |
| GATE(usbotg, "usbotg", "aclk200", GATE_IP_FSYS, 7, 0, 0), |
| GATE(mipi_hsi, "mipi_hsi", "aclk200", GATE_IP_FSYS, 8, 0, 0), |
| GATE(sdmmc0, "sdmmc0", "aclk200", GATE_IP_FSYS, 12, 0, 0), |
| GATE(sdmmc1, "sdmmc1", "aclk200", GATE_IP_FSYS, 13, 0, 0), |
| GATE(sdmmc2, "sdmmc2", "aclk200", GATE_IP_FSYS, 14, 0, 0), |
| GATE(sdmmc3, "sdmmc3", "aclk200", GATE_IP_FSYS, 15, 0, 0), |
| GATE(sromc, "sromc", "aclk200", GATE_IP_FSYS, 17, 0, 0), |
| GATE(usb2, "usb2", "aclk200", GATE_IP_FSYS, 18, 0, 0), |
| GATE(usb3, "usb3", "aclk200", GATE_IP_FSYS, 19, 0, 0), |
| GATE(sata_phyctrl, "sata_phyctrl", "aclk200", GATE_IP_FSYS, 24, 0, 0), |
| GATE(sata_phyi2c, "sata_phyi2c", "aclk200", GATE_IP_FSYS, 25, 0, 0), |
| GATE(uart0, "uart0", "aclk66", GATE_IP_PERIC, 0, 0, 0), |
| GATE(uart1, "uart1", "aclk66", GATE_IP_PERIC, 1, 0, 0), |
| GATE(uart2, "uart2", "aclk66", GATE_IP_PERIC, 2, 0, 0), |
| GATE(uart3, "uart3", "aclk66", GATE_IP_PERIC, 3, 0, 0), |
| GATE(uart4, "uart4", "aclk66", GATE_IP_PERIC, 4, 0, 0), |
| GATE(i2c0, "i2c0", "aclk66", GATE_IP_PERIC, 6, 0, 0), |
| GATE(i2c1, "i2c1", "aclk66", GATE_IP_PERIC, 7, 0, 0), |
| GATE(i2c2, "i2c2", "aclk66", GATE_IP_PERIC, 8, 0, 0), |
| GATE(i2c3, "i2c3", "aclk66", GATE_IP_PERIC, 9, 0, 0), |
| GATE(i2c4, "i2c4", "aclk66", GATE_IP_PERIC, 10, 0, 0), |
| GATE(i2c5, "i2c5", "aclk66", GATE_IP_PERIC, 11, 0, 0), |
| GATE(i2c6, "i2c6", "aclk66", GATE_IP_PERIC, 12, 0, 0), |
| GATE(i2c7, "i2c7", "aclk66", GATE_IP_PERIC, 13, 0, 0), |
| GATE(i2c_hdmi, "i2c_hdmi", "aclk66", GATE_IP_PERIC, 14, 0, 0), |
| GATE(adc, "adc", "aclk66", GATE_IP_PERIC, 15, 0, 0), |
| GATE(spi0, "spi0", "aclk66", GATE_IP_PERIC, 16, 0, 0), |
| GATE(spi1, "spi1", "aclk66", GATE_IP_PERIC, 17, 0, 0), |
| GATE(spi2, "spi2", "aclk66", GATE_IP_PERIC, 18, 0, 0), |
| GATE(i2s1, "i2s1", "aclk66", GATE_IP_PERIC, 20, 0, 0), |
| GATE(i2s2, "i2s2", "aclk66", GATE_IP_PERIC, 21, 0, 0), |
| GATE(pcm1, "pcm1", "aclk66", GATE_IP_PERIC, 22, 0, 0), |
| GATE(pcm2, "pcm2", "aclk66", GATE_IP_PERIC, 23, 0, 0), |
| GATE(pwm, "pwm", "aclk66", GATE_IP_PERIC, 24, 0, 0), |
| GATE(spdif, "spdif", "aclk66", GATE_IP_PERIC, 26, 0, 0), |
| GATE(ac97, "ac97", "aclk66", GATE_IP_PERIC, 27, 0, 0), |
| GATE(hsi2c0, "hsi2c0", "aclk66", GATE_IP_PERIC, 28, 0, 0), |
| GATE(hsi2c1, "hsi2c1", "aclk66", GATE_IP_PERIC, 29, 0, 0), |
| GATE(hsi2c2, "hsi2c2", "aclk66", GATE_IP_PERIC, 30, 0, 0), |
| GATE(hsi2c3, "hsi2c3", "aclk66", GATE_IP_PERIC, 31, 0, 0), |
| GATE(chipid, "chipid", "aclk66", GATE_IP_PERIS, 0, 0, 0), |
| GATE(sysreg, "sysreg", "aclk66", GATE_IP_PERIS, 1, 0, 0), |
| GATE(pmu, "pmu", "aclk66", GATE_IP_PERIS, 2, CLK_IGNORE_UNUSED, 0), |
| GATE(tzpc0, "tzpc0", "aclk66", GATE_IP_PERIS, 6, 0, 0), |
| GATE(tzpc1, "tzpc1", "aclk66", GATE_IP_PERIS, 7, 0, 0), |
| GATE(tzpc2, "tzpc2", "aclk66", GATE_IP_PERIS, 8, 0, 0), |
| GATE(tzpc3, "tzpc3", "aclk66", GATE_IP_PERIS, 9, 0, 0), |
| GATE(tzpc4, "tzpc4", "aclk66", GATE_IP_PERIS, 10, 0, 0), |
| GATE(tzpc5, "tzpc5", "aclk66", GATE_IP_PERIS, 11, 0, 0), |
| GATE(tzpc6, "tzpc6", "aclk66", GATE_IP_PERIS, 12, 0, 0), |
| GATE(tzpc7, "tzpc7", "aclk66", GATE_IP_PERIS, 13, 0, 0), |
| GATE(tzpc8, "tzpc8", "aclk66", GATE_IP_PERIS, 14, 0, 0), |
| GATE(tzpc9, "tzpc9", "aclk66", GATE_IP_PERIS, 15, 0, 0), |
| GATE(hdmi_cec, "hdmi_cec", "aclk66", GATE_IP_PERIS, 16, 0, 0), |
| GATE(mct, "mct", "aclk66", GATE_IP_PERIS, 18, 0, 0), |
| GATE(wdt, "wdt", "aclk66", GATE_IP_PERIS, 19, 0, 0), |
| GATE(rtc, "rtc", "aclk66", GATE_IP_PERIS, 20, 0, 0), |
| GATE(tmu, "tmu", "aclk66", GATE_IP_PERIS, 21, 0, 0), |
| GATE(cmu_top, "cmu_top", "aclk66", |
| GATE_IP_PERIS, 3, CLK_IGNORE_UNUSED, 0), |
| GATE(cmu_core, "cmu_core", "aclk66", |
| GATE_IP_PERIS, 4, CLK_IGNORE_UNUSED, 0), |
| GATE(cmu_mem, "cmu_mem", "aclk66", |
| GATE_IP_PERIS, 5, CLK_IGNORE_UNUSED, 0), |
| GATE(sclk_cam_bayer, "sclk_cam_bayer", "div_cam_bayer", |
| SRC_MASK_GSCL, 12, CLK_SET_RATE_PARENT, 0), |
| GATE(sclk_cam0, "sclk_cam0", "div_cam0", |
| SRC_MASK_GSCL, 16, CLK_SET_RATE_PARENT, 0), |
| GATE(sclk_cam1, "sclk_cam1", "div_cam1", |
| SRC_MASK_GSCL, 20, CLK_SET_RATE_PARENT, 0), |
| GATE(sclk_gscl_wa, "sclk_gscl_wa", "div_gscl_wa", |
| SRC_MASK_GSCL, 24, CLK_SET_RATE_PARENT, 0), |
| GATE(sclk_gscl_wb, "sclk_gscl_wb", "div_gscl_wb", |
| SRC_MASK_GSCL, 28, CLK_SET_RATE_PARENT, 0), |
| GATE(sclk_fimd1, "sclk_fimd1", "div_fimd1", |
| SRC_MASK_DISP1_0, 0, CLK_SET_RATE_PARENT, 0), |
| GATE(sclk_mipi1, "sclk_mipi1", "div_mipi1", |
| SRC_MASK_DISP1_0, 12, CLK_SET_RATE_PARENT, 0), |
| GATE(sclk_dp, "sclk_dp", "div_dp", |
| SRC_MASK_DISP1_0, 16, CLK_SET_RATE_PARENT, 0), |
| GATE(sclk_hdmi, "sclk_hdmi", "mout_hdmi", |
| SRC_MASK_DISP1_0, 20, 0, 0), |
| GATE(sclk_audio0, "sclk_audio0", "div_audio0", |
| SRC_MASK_MAU, 0, CLK_SET_RATE_PARENT, 0), |
| GATE(sclk_mmc0, "sclk_mmc0", "div_mmc_pre0", |
| SRC_MASK_FSYS, 0, CLK_SET_RATE_PARENT, 0), |
| GATE(sclk_mmc1, "sclk_mmc1", "div_mmc_pre1", |
| SRC_MASK_FSYS, 4, CLK_SET_RATE_PARENT, 0), |
| GATE(sclk_mmc2, "sclk_mmc2", "div_mmc_pre2", |
| SRC_MASK_FSYS, 8, CLK_SET_RATE_PARENT, 0), |
| GATE(sclk_mmc3, "sclk_mmc3", "div_mmc_pre3", |
| SRC_MASK_FSYS, 12, CLK_SET_RATE_PARENT, 0), |
| GATE(sclk_sata, "sclk_sata", "div_sata", |
| SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0), |
| GATE(sclk_usb3, "sclk_usb3", "div_usb3", |
| SRC_MASK_FSYS, 28, CLK_SET_RATE_PARENT, 0), |
| GATE(sclk_jpeg, "sclk_jpeg", "div_jpeg", |
| SRC_MASK_GEN, 0, CLK_SET_RATE_PARENT, 0), |
| GATE(sclk_uart0, "sclk_uart0", "div_uart0", |
| SRC_MASK_PERIC0, 0, CLK_SET_RATE_PARENT, 0), |
| GATE(sclk_uart1, "sclk_uart1", "div_uart1", |
| SRC_MASK_PERIC0, 4, CLK_SET_RATE_PARENT, 0), |
| GATE(sclk_uart2, "sclk_uart2", "div_uart2", |
| SRC_MASK_PERIC0, 8, CLK_SET_RATE_PARENT, 0), |
| GATE(sclk_uart3, "sclk_uart3", "div_uart3", |
| SRC_MASK_PERIC0, 12, CLK_SET_RATE_PARENT, 0), |
| GATE(sclk_pwm, "sclk_pwm", "div_pwm", |
| SRC_MASK_PERIC0, 24, CLK_SET_RATE_PARENT, 0), |
| GATE(sclk_audio1, "sclk_audio1", "div_audio1", |
| SRC_MASK_PERIC1, 0, CLK_SET_RATE_PARENT, 0), |
| GATE(sclk_audio2, "sclk_audio2", "div_audio2", |
| SRC_MASK_PERIC1, 4, CLK_SET_RATE_PARENT, 0), |
| GATE(sclk_spdif, "sclk_spdif", "mout_spdif", |
| SRC_MASK_PERIC1, 4, 0, 0), |
| GATE(sclk_spi0, "sclk_spi0", "div_spi_pre0", |
| SRC_MASK_PERIC1, 16, CLK_SET_RATE_PARENT, 0), |
| GATE(sclk_spi1, "sclk_spi1", "div_spi_pre1", |
| SRC_MASK_PERIC1, 20, CLK_SET_RATE_PARENT, 0), |
| GATE(sclk_spi2, "sclk_spi2", "div_spi_pre2", |
| SRC_MASK_PERIC1, 24, CLK_SET_RATE_PARENT, 0), |
| GATE(fimd1, "fimd1", "aclk200", GATE_IP_DISP1, 0, 0, 0), |
| GATE(mie1, "mie1", "aclk200", GATE_IP_DISP1, 1, 0, 0), |
| GATE(dsim0, "dsim0", "aclk200", GATE_IP_DISP1, 3, 0, 0), |
| GATE(dp, "dp", "aclk200", GATE_IP_DISP1, 4, 0, 0), |
| GATE(mixer, "mixer", "aclk200", GATE_IP_DISP1, 5, 0, 0), |
| GATE(hdmi, "hdmi", "aclk200", GATE_IP_DISP1, 6, 0, 0), |
| }; |
| |
| static __initdata struct of_device_id ext_clk_match[] = { |
| { .compatible = "samsung,clock-xxti", .data = (void *)0, }, |
| { }, |
| }; |
| |
| /* register exynox5250 clocks */ |
| void __init exynos5250_clk_init(struct device_node *np) |
| { |
| void __iomem *reg_base; |
| struct clk *apll, *mpll, *epll, *vpll, *bpll, *gpll, *cpll; |
| |
| if (np) { |
| reg_base = of_iomap(np, 0); |
| if (!reg_base) |
| panic("%s: failed to map registers\n", __func__); |
| } else { |
| panic("%s: unable to determine soc\n", __func__); |
| } |
| |
| samsung_clk_init(np, reg_base, nr_clks, |
| exynos5250_clk_regs, ARRAY_SIZE(exynos5250_clk_regs), |
| NULL, 0); |
| samsung_clk_of_register_fixed_ext(exynos5250_fixed_rate_ext_clks, |
| ARRAY_SIZE(exynos5250_fixed_rate_ext_clks), |
| ext_clk_match); |
| |
| apll = samsung_clk_register_pll35xx("fout_apll", "fin_pll", |
| reg_base + 0x100); |
| mpll = samsung_clk_register_pll35xx("fout_mpll", "fin_pll", |
| reg_base + 0x4100); |
| bpll = samsung_clk_register_pll35xx("fout_bpll", "fin_pll", |
| reg_base + 0x20110); |
| gpll = samsung_clk_register_pll35xx("fout_gpll", "fin_pll", |
| reg_base + 0x10150); |
| cpll = samsung_clk_register_pll35xx("fout_cpll", "fin_pll", |
| reg_base + 0x10120); |
| epll = samsung_clk_register_pll36xx("fout_epll", "fin_pll", |
| reg_base + 0x10130); |
| vpll = samsung_clk_register_pll36xx("fout_vpll", "mout_vpllsrc", |
| reg_base + 0x10140); |
| |
| samsung_clk_register_fixed_rate(exynos5250_fixed_rate_clks, |
| ARRAY_SIZE(exynos5250_fixed_rate_clks)); |
| samsung_clk_register_fixed_factor(exynos5250_fixed_factor_clks, |
| ARRAY_SIZE(exynos5250_fixed_factor_clks)); |
| samsung_clk_register_mux(exynos5250_mux_clks, |
| ARRAY_SIZE(exynos5250_mux_clks)); |
| samsung_clk_register_div(exynos5250_div_clks, |
| ARRAY_SIZE(exynos5250_div_clks)); |
| samsung_clk_register_gate(exynos5250_gate_clks, |
| ARRAY_SIZE(exynos5250_gate_clks)); |
| |
| pr_info("Exynos5250: clock setup completed, armclk=%ld\n", |
| _get_rate("armclk")); |
| } |
| CLK_OF_DECLARE(exynos5250_clk, "samsung,exynos5250-clock", exynos5250_clk_init); |