net: phy: smsc: force all capable mode if the phy is started in powerdown mode
A SMSC PHY in power down mode can't be used.
If a SMSC PHY is in this mode in the config_init
stage, the mode "all capable" is set. So the PHY
could then be used.
Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index 16dceed..ef883e3 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -43,7 +43,31 @@
static int smsc_phy_config_init(struct phy_device *phydev)
{
- int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
+ int rc = phy_read(phydev, MII_LAN83C185_SPECIAL_MODES);
+ if (rc < 0)
+ return rc;
+
+ /* If the SMSC PHY is in power down mode, then set it
+ * in all capable mode before using it.
+ */
+ if ((rc & MII_LAN83C185_MODE_MASK) == MII_LAN83C185_MODE_POWERDOWN) {
+ int timeout = 50000;
+
+ /* set "all capable" mode and reset the phy */
+ rc |= MII_LAN83C185_MODE_ALL;
+ phy_write(phydev, MII_LAN83C185_SPECIAL_MODES, rc);
+ phy_write(phydev, MII_BMCR, BMCR_RESET);
+
+ /* wait end of reset (max 500 ms) */
+ do {
+ udelay(10);
+ if (timeout-- == 0)
+ return -1;
+ rc = phy_read(phydev, MII_BMCR);
+ } while (rc & BMCR_RESET);
+ }
+
+ rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
if (rc < 0)
return rc;