diff --git a/sound/pci/ice1712/aureon.c b/sound/pci/ice1712/aureon.c
index 55902ec..3b3cf4a 100644
--- a/sound/pci/ice1712/aureon.c
+++ b/sound/pci/ice1712/aureon.c
@@ -1937,9 +1937,12 @@
 		snd_ice1712_save_gpio_status(ice);
 		id = aureon_cs8415_get(ice, CS8415_ID);
 		if (id != 0x41)
-			snd_printk(KERN_INFO "No CS8415 chip. Skipping CS8415 controls.\n");
+			dev_info(ice->card->dev,
+				 "No CS8415 chip. Skipping CS8415 controls.\n");
 		else if ((id & 0x0F) != 0x01)
-			snd_printk(KERN_INFO "Detected unsupported CS8415 rev. (%c)\n", (char)((id & 0x0F) + 'A' - 1));
+			dev_info(ice->card->dev,
+				 "Detected unsupported CS8415 rev. (%c)\n",
+				 (char)((id & 0x0F) + 'A' - 1));
 		else {
 			for (i = 0; i < ARRAY_SIZE(cs8415_controls); i++) {
 				struct snd_kcontrol *kctl;
diff --git a/sound/pci/ice1712/delta.c b/sound/pci/ice1712/delta.c
index 9e28cc1..98e5e95 100644
--- a/sound/pci/ice1712/delta.c
+++ b/sound/pci/ice1712/delta.c
@@ -425,7 +425,8 @@
 	struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 
 	if (snd_i2c_sendbytes(ice->cs8427, &reg, 1) != 1)
-		snd_printk(KERN_ERR "unable to send register 0x%x byte to CS8427\n", reg);
+		dev_err(ice->card->dev,
+			"unable to send register 0x%x byte to CS8427\n", reg);
 	snd_i2c_readbytes(ice->cs8427, &reg, 1);
 	ucontrol->value.integer.value[0] = (reg & CS8427_UNLOCK) ? 1 : 0;
 	return 0;
@@ -637,7 +638,7 @@
 	case ICE1712_SUBDEVICE_VX442:
 	case ICE1712_SUBDEVICE_DELTA66E:
 		if ((err = snd_i2c_bus_create(ice->card, "ICE1712 GPIO 1", NULL, &ice->i2c)) < 0) {
-			snd_printk(KERN_ERR "unable to create I2C bus\n");
+			dev_err(ice->card->dev, "unable to create I2C bus\n");
 			return err;
 		}
 		ice->i2c->private_data = ice;
diff --git a/sound/pci/ice1712/ews.c b/sound/pci/ice1712/ews.c
index bc2e701..817a1bc 100644
--- a/sound/pci/ice1712/ews.c
+++ b/sound/pci/ice1712/ews.c
@@ -163,7 +163,8 @@
 
      __error:
 	snd_i2c_unlock(ice->i2c);
-	snd_printk(KERN_ERR "AK4524 chip select failed, check cable to the front module\n");
+	dev_err(ice->card->dev,
+		"AK4524 chip select failed, check cable to the front module\n");
 	return -EIO;
 }
 
@@ -174,7 +175,7 @@
 	unsigned char tmp;
 	/* assert AK4524 CS */
 	if (snd_ice1712_ews88mt_chip_select(ice, ~(1 << chip) & 0x0f) < 0)
-		snd_printk(KERN_ERR "fatal error (ews88mt chip select)\n");
+		dev_err(ice->card->dev, "fatal error (ews88mt chip select)\n");
 	snd_ice1712_save_gpio_status(ice);
 	tmp = ICE1712_EWS88_SERIAL_DATA |
 		ICE1712_EWS88_SERIAL_CLOCK |
@@ -456,7 +457,7 @@
 
 	/* create i2c */
 	if ((err = snd_i2c_bus_create(ice->card, "ICE1712 GPIO 1", NULL, &ice->i2c)) < 0) {
-		snd_printk(KERN_ERR "unable to create I2C bus\n");
+		dev_err(ice->card->dev, "unable to create I2C bus\n");
 		return err;
 	}
 	ice->i2c->private_data = ice;
@@ -469,7 +470,8 @@
 					    ICE1712_6FIRE_PCF9554_ADDR,
 					    &spec->i2cdevs[EWS_I2C_6FIRE]);
 		if (err < 0) {
-			snd_printk(KERN_ERR "PCF9554 initialization failed\n");
+			dev_err(ice->card->dev,
+				"PCF9554 initialization failed\n");
 			return err;
 		}
 		snd_ice1712_6fire_write_pca(ice, PCF9554_REG_CONFIG, 0x80);
@@ -834,7 +836,7 @@
 	byte = 0;
 	if (snd_i2c_readbytes(spec->i2cdevs[EWS_I2C_6FIRE], &byte, 1) != 1) {
 		snd_i2c_unlock(ice->i2c);
-		printk(KERN_ERR "cannot read pca\n");
+		dev_err(ice->card->dev, "cannot read pca\n");
 		return -EIO;
 	}
 	snd_i2c_unlock(ice->i2c);
diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c
index 99c022a0..0710ec7 100644
--- a/sound/pci/ice1712/ice1712.c
+++ b/sound/pci/ice1712/ice1712.c
@@ -394,7 +394,7 @@
 	err = snd_cs8427_create(ice->i2c, addr,
 		(ice->cs8427_timeout * HZ) / 1000, &ice->cs8427);
 	if (err < 0) {
-		snd_printk(KERN_ERR "CS8427 initialization failed\n");
+		dev_err(ice->card->dev, "CS8427 initialization failed\n");
 		return err;
 	}
 	ice->spdif.ops.open = open_cs8427;
@@ -467,7 +467,7 @@
 			u16 pbkstatus;
 			struct snd_pcm_substream *substream;
 			pbkstatus = inw(ICEDS(ice, INTSTAT));
-			/* printk(KERN_DEBUG "pbkstatus = 0x%x\n", pbkstatus); */
+			/* dev_dbg(ice->card->dev, "pbkstatus = 0x%x\n", pbkstatus); */
 			for (idx = 0; idx < 6; idx++) {
 				if ((pbkstatus & (3 << (idx * 2))) == 0)
 					continue;
@@ -903,7 +903,8 @@
 	if (rpcm)
 		*rpcm = pcm;
 
-	printk(KERN_WARNING "Consumer PCM code does not work well at the moment --jk\n");
+	dev_warn(ice->card->dev,
+		 "Consumer PCM code does not work well at the moment --jk\n");
 
 	return 0;
 }
@@ -1534,7 +1535,8 @@
 		ac97.private_free = snd_ice1712_mixer_free_ac97;
 		err = snd_ac97_mixer(pbus, &ac97, &ice->ac97);
 		if (err < 0)
-			printk(KERN_WARNING "ice1712: cannot initialize ac97 for consumer, skipped\n");
+			dev_warn(ice->card->dev,
+				 "cannot initialize ac97 for consumer, skipped\n");
 		else {
 			err = snd_ctl_add(ice->card, snd_ctl_new1(&snd_ice1712_mixer_digmix_route_ac97, ice));
 			if (err < 0)
@@ -1552,7 +1554,8 @@
 		ac97.private_free = snd_ice1712_mixer_free_ac97;
 		err = snd_ac97_mixer(pbus, &ac97, &ice->ac97);
 		if (err < 0)
-			printk(KERN_WARNING "ice1712: cannot initialize pro ac97, skipped\n");
+			dev_warn(ice->card->dev,
+				 "cannot initialize pro ac97, skipped\n");
 		else
 			return 0;
 	}
@@ -2332,7 +2335,8 @@
 			pci_read_config_word(ice->pci, PCI_SUBSYSTEM_ID, &device);
 			ice->eeprom.subvendor = ((unsigned int)swab16(vendor) << 16) | swab16(device);
 			if (ice->eeprom.subvendor == 0 || ice->eeprom.subvendor == (unsigned int)-1) {
-				printk(KERN_ERR "ice1712: No valid ID is found\n");
+				dev_err(ice->card->dev,
+					"No valid ID is found\n");
 				return -ENXIO;
 			}
 		}
@@ -2340,21 +2344,22 @@
 	for (tbl = card_tables; *tbl; tbl++) {
 		for (c = *tbl; c->subvendor; c++) {
 			if (modelname && c->model && !strcmp(modelname, c->model)) {
-				printk(KERN_INFO "ice1712: Using board model %s\n", c->name);
+				dev_info(ice->card->dev,
+					 "Using board model %s\n", c->name);
 				ice->eeprom.subvendor = c->subvendor;
 			} else if (c->subvendor != ice->eeprom.subvendor)
 				continue;
 			if (!c->eeprom_size || !c->eeprom_data)
 				goto found;
 			/* if the EEPROM is given by the driver, use it */
-			snd_printdd("using the defined eeprom..\n");
+			dev_dbg(ice->card->dev, "using the defined eeprom..\n");
 			ice->eeprom.version = 1;
 			ice->eeprom.size = c->eeprom_size + 6;
 			memcpy(ice->eeprom.data, c->eeprom_data, c->eeprom_size);
 			goto read_skipped;
 		}
 	}
-	printk(KERN_WARNING "ice1712: No matching model found for ID 0x%x\n",
+	dev_warn(ice->card->dev, "No matching model found for ID 0x%x\n",
 	       ice->eeprom.subvendor);
 
  found:
@@ -2362,12 +2367,13 @@
 	if (ice->eeprom.size < 6)
 		ice->eeprom.size = 32; /* FIXME: any cards without the correct size? */
 	else if (ice->eeprom.size > 32) {
-		snd_printk(KERN_ERR "invalid EEPROM (size = %i)\n", ice->eeprom.size);
+		dev_err(ice->card->dev,
+			"invalid EEPROM (size = %i)\n", ice->eeprom.size);
 		return -EIO;
 	}
 	ice->eeprom.version = snd_ice1712_read_i2c(ice, dev, 0x05);
 	if (ice->eeprom.version != 1) {
-		snd_printk(KERN_ERR "invalid EEPROM version %i\n",
+		dev_err(ice->card->dev, "invalid EEPROM version %i\n",
 			   ice->eeprom.version);
 		/* return -EIO; */
 	}
@@ -2553,7 +2559,8 @@
 	/* check, if we can restrict PCI DMA transfers to 28 bits */
 	if (pci_set_dma_mask(pci, DMA_BIT_MASK(28)) < 0 ||
 	    pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(28)) < 0) {
-		snd_printk(KERN_ERR "architecture does not support 28bit PCI busmaster DMA\n");
+		dev_err(card->dev,
+			"architecture does not support 28bit PCI busmaster DMA\n");
 		pci_disable_device(pci);
 		return -ENXIO;
 	}
@@ -2609,7 +2616,7 @@
 
 	if (request_irq(pci->irq, snd_ice1712_interrupt, IRQF_SHARED,
 			KBUILD_MODNAME, ice)) {
-		snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
+		dev_err(card->dev, "unable to grab IRQ %d\n", pci->irq);
 		snd_ice1712_free(ice);
 		return -EIO;
 	}
diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c
index cf1ba11..5e7948f 100644
--- a/sound/pci/ice1712/ice1724.c
+++ b/sound/pci/ice1712/ice1724.c
@@ -146,7 +146,7 @@
 			continue;
 		return old_cmd;
 	}
-	snd_printd(KERN_ERR "snd_vt1724_ac97_ready: timeout\n");
+	dev_dbg(ice->card->dev, "snd_vt1724_ac97_ready: timeout\n");
 	return old_cmd;
 }
 
@@ -156,7 +156,7 @@
 	for (tm = 0; tm < 0x10000; tm++)
 		if ((inb(ICEMT1724(ice, AC97_CMD)) & bit) == 0)
 			return 0;
-	snd_printd(KERN_ERR "snd_vt1724_ac97_wait_bit: timeout\n");
+	dev_dbg(ice->card->dev, "snd_vt1724_ac97_wait_bit: timeout\n");
 	return -EIO;
 }
 
@@ -430,10 +430,10 @@
 		spin_lock(&ice->reg_lock);
 		if (++timeout > 10) {
 			status = inb(ICEREG1724(ice, IRQSTAT));
-			printk(KERN_ERR "ice1724: Too long irq loop, "
-			       "status = 0x%x\n", status);
+			dev_err(ice->card->dev,
+				"Too long irq loop, status = 0x%x\n", status);
 			if (status & VT1724_IRQ_MPU_TX) {
-				printk(KERN_ERR "ice1724: Disabling MPU_TX\n");
+				dev_err(ice->card->dev, "Disabling MPU_TX\n");
 				enable_midi_irq(ice, VT1724_IRQ_MPU_TX, 0);
 			}
 			spin_unlock(&ice->reg_lock);
@@ -801,7 +801,7 @@
 	spin_unlock_irq(&ice->reg_lock);
 
 	/*
-	printk(KERN_DEBUG "pro prepare: ch = %d, addr = 0x%x, "
+	dev_dbg(ice->card->dev, "pro prepare: ch = %d, addr = 0x%x, "
 	       "buffer = 0x%x, period = 0x%x\n",
 	       substream->runtime->channels,
 	       (unsigned int)substream->runtime->dma_addr,
@@ -821,13 +821,13 @@
 #if 0 /* read PLAYBACK_ADDR */
 	ptr = inl(ICEMT1724(ice, PLAYBACK_ADDR));
 	if (ptr < substream->runtime->dma_addr) {
-		snd_printd("ice1724: invalid negative ptr\n");
+		dev_dbg(ice->card->dev, "invalid negative ptr\n");
 		return 0;
 	}
 	ptr -= substream->runtime->dma_addr;
 	ptr = bytes_to_frames(substream->runtime, ptr);
 	if (ptr >= substream->runtime->buffer_size) {
-		snd_printd("ice1724: invalid ptr %d (size=%d)\n",
+		dev_dbg(ice->card->dev, "invalid ptr %d (size=%d)\n",
 			   (int)ptr, (int)substream->runtime->period_size);
 		return 0;
 	}
@@ -840,7 +840,7 @@
 	else if (ptr <= substream->runtime->buffer_size)
 		ptr = substream->runtime->buffer_size - ptr;
 	else {
-		snd_printd("ice1724: invalid ptr %d (size=%d)\n",
+		dev_dbg(ice->card->dev, "invalid ptr %d (size=%d)\n",
 			   (int)ptr, (int)substream->runtime->buffer_size);
 		ptr = 0;
 	}
@@ -884,7 +884,7 @@
 	else if (ptr <= substream->runtime->buffer_size)
 		ptr = substream->runtime->buffer_size - ptr;
 	else {
-		snd_printd("ice1724: invalid ptr %d (size=%d)\n",
+		dev_dbg(ice->card->dev, "invalid ptr %d (size=%d)\n",
 			   (int)ptr, (int)substream->runtime->buffer_size);
 		ptr = 0;
 	}
@@ -1508,7 +1508,8 @@
 		ac97.private_data = ice;
 		err = snd_ac97_mixer(pbus, &ac97, &ice->ac97);
 		if (err < 0)
-			printk(KERN_WARNING "ice1712: cannot initialize pro ac97, skipped\n");
+			dev_warn(ice->card->dev,
+				 "cannot initialize pro ac97, skipped\n");
 		else
 			return 0;
 	}
@@ -2271,7 +2272,7 @@
 	while ((inb(ICEREG1724(ice, I2C_CTRL)) & VT1724_I2C_BUSY) && t--)
 		;
 	if (t == -1)
-		printk(KERN_ERR "ice1724: i2c busy timeout\n");
+		dev_err(ice->card->dev, "i2c busy timeout\n");
 }
 
 unsigned char snd_vt1724_read_i2c(struct snd_ice1712 *ice,
@@ -2287,7 +2288,7 @@
 	val = inb(ICEREG1724(ice, I2C_DATA));
 	mutex_unlock(&ice->i2c_mutex);
 	/*
-	printk(KERN_DEBUG "i2c_read: [0x%x,0x%x] = 0x%x\n", dev, addr, val);
+	dev_dbg(ice->card->dev, "i2c_read: [0x%x,0x%x] = 0x%x\n", dev, addr, val);
 	*/
 	return val;
 }
@@ -2298,7 +2299,7 @@
 	mutex_lock(&ice->i2c_mutex);
 	wait_i2c_busy(ice);
 	/*
-	printk(KERN_DEBUG "i2c_write: [0x%x,0x%x] = 0x%x\n", dev, addr, data);
+	dev_dbg(ice->card->dev, "i2c_write: [0x%x,0x%x] = 0x%x\n", dev, addr, data);
 	*/
 	outb(addr, ICEREG1724(ice, I2C_BYTE_ADDR));
 	outb(data, ICEREG1724(ice, I2C_DATA));
@@ -2335,7 +2336,8 @@
 				((unsigned int)swab16(vendor) << 16) | swab16(device);
 			if (ice->eeprom.subvendor == 0 ||
 			    ice->eeprom.subvendor == (unsigned int)-1) {
-				printk(KERN_ERR "ice1724: No valid ID is found\n");
+				dev_err(ice->card->dev,
+					"No valid ID is found\n");
 				return -ENXIO;
 			}
 		}
@@ -2344,7 +2346,8 @@
 		for (c = *tbl; c->name; c++) {
 			if (modelname && c->model &&
 			    !strcmp(modelname, c->model)) {
-				printk(KERN_INFO "ice1724: Using board model %s\n",
+				dev_info(ice->card->dev,
+					 "Using board model %s\n",
 				       c->name);
 				ice->eeprom.subvendor = c->subvendor;
 			} else if (c->subvendor != ice->eeprom.subvendor)
@@ -2353,14 +2356,14 @@
 			if (!c->eeprom_size || !c->eeprom_data)
 				goto found;
 			/* if the EEPROM is given by the driver, use it */
-			snd_printdd("using the defined eeprom..\n");
+			dev_dbg(ice->card->dev, "using the defined eeprom..\n");
 			ice->eeprom.version = 2;
 			ice->eeprom.size = c->eeprom_size + 6;
 			memcpy(ice->eeprom.data, c->eeprom_data, c->eeprom_size);
 			goto read_skipped;
 		}
 	}
-	printk(KERN_WARNING "ice1724: No matching model found for ID 0x%x\n",
+	dev_warn(ice->card->dev, "No matching model found for ID 0x%x\n",
 	       ice->eeprom.subvendor);
 #ifdef CONFIG_PM_SLEEP
 	/* assume AC97-only card which can suspend without additional code */
@@ -2372,13 +2375,13 @@
 	if (ice->eeprom.size < 6)
 		ice->eeprom.size = 32;
 	else if (ice->eeprom.size > 32) {
-		printk(KERN_ERR "ice1724: Invalid EEPROM (size = %i)\n",
+		dev_err(ice->card->dev, "Invalid EEPROM (size = %i)\n",
 		       ice->eeprom.size);
 		return -EIO;
 	}
 	ice->eeprom.version = snd_vt1724_read_i2c(ice, dev, 0x05);
 	if (ice->eeprom.version != 1 && ice->eeprom.version != 2)
-		printk(KERN_WARNING "ice1724: Invalid EEPROM version %i\n",
+		dev_warn(ice->card->dev, "Invalid EEPROM version %i\n",
 		       ice->eeprom.version);
 	size = ice->eeprom.size - 6;
 	for (i = 0; i < size; i++)
@@ -2586,7 +2589,7 @@
 
 	if (request_irq(pci->irq, snd_vt1724_interrupt,
 			IRQF_SHARED, KBUILD_MODNAME, ice)) {
-		snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
+		dev_err(card->dev, "unable to grab IRQ %d\n", pci->irq);
 		snd_vt1724_free(ice);
 		return -EIO;
 	}
diff --git a/sound/pci/ice1712/juli.c b/sound/pci/ice1712/juli.c
index 8855933..7a6c078 100644
--- a/sound/pci/ice1712/juli.c
+++ b/sound/pci/ice1712/juli.c
@@ -244,7 +244,7 @@
 	/* AK5385 first, since it requires cold reset affecting both codecs */
 	old_gpio = ice->gpio.get_data(ice);
 	new_gpio =  (old_gpio & ~GPIO_AK5385A_MASK) | ak5385_pins;
-	/* printk(KERN_DEBUG "JULI - ak5385 set_rate_val: new gpio 0x%x\n",
+	/* dev_dbg(ice->card->dev, "JULI - ak5385 set_rate_val: new gpio 0x%x\n",
 		new_gpio); */
 	ice->gpio.set_data(ice, new_gpio);
 
@@ -344,7 +344,7 @@
 			new_gpio =  old_gpio &
 				~((unsigned int) kcontrol->private_value);
 	}
-	/* printk(KERN_DEBUG
+	/* dev_dbg(ice->card->dev,
 		"JULI - mute/unmute: control_value: 0x%x, old_gpio: 0x%x, "
 		"new_gpio 0x%x\n",
 		(unsigned int)ucontrol->value.integer.value[0], old_gpio,
@@ -439,9 +439,9 @@
 {
 	for (; *list; list++) {
 		struct snd_kcontrol *slave = ctl_find(card, *list);
-		/* printk(KERN_DEBUG "add_slaves - %s\n", *list); */
+		/* dev_dbg(card->dev, "add_slaves - %s\n", *list); */
 		if (slave) {
-			/* printk(KERN_DEBUG "slave %s found\n", *list); */
+			/* dev_dbg(card->dev, "slave %s found\n", *list); */
 			snd_ctl_add_slave(master, slave);
 		}
 	}
@@ -536,7 +536,7 @@
 
 	old = ice->gpio.get_data(ice);
 	new =  (old & ~GPIO_RATE_MASK) | get_gpio_val(rate);
-	/* printk(KERN_DEBUG "JULI - set_rate: old %x, new %x\n",
+	/* dev_dbg(ice->card->dev, "JULI - set_rate: old %x, new %x\n",
 			old & GPIO_RATE_MASK,
 			new & GPIO_RATE_MASK); */
 
@@ -573,7 +573,7 @@
 	if (ice->is_spdif_master(ice) && c1) {
 		/* only for SPDIF master mode, rate was changed */
 		rate = snd_ak4114_external_rate(ak4114);
-		/* printk(KERN_DEBUG "ak4114 - input rate changed to %d\n",
+		/* dev_dbg(ice->card->dev, "ak4114 - input rate changed to %d\n",
 				rate); */
 		juli_akm_set_rate_val(ice->akm, rate);
 	}
@@ -628,7 +628,7 @@
 #endif
 
 	if (spec->analog) {
-		printk(KERN_INFO "juli@: analog I/O detected\n");
+		dev_info(ice->card->dev, "juli@: analog I/O detected\n");
 		ice->num_total_dacs = 2;
 		ice->num_total_adcs = 2;
 
diff --git a/sound/pci/ice1712/prodigy192.c b/sound/pci/ice1712/prodigy192.c
index e610339..f3b491a 100644
--- a/sound/pci/ice1712/prodigy192.c
+++ b/sound/pci/ice1712/prodigy192.c
@@ -98,7 +98,7 @@
 	new = (~mute << 7 & 0x80) | (old & ~0x80);
 	change = (new != old);
 	if (change)
-		/*printk ("Volume register 0x%02x: 0x%02x\n", idx, new);*/
+		/* dev_dbg(ice->card->dev, "Volume register 0x%02x: 0x%02x\n", idx, new);*/
 		stac9460_put(ice, idx, new);
 	return change;
 }
@@ -133,7 +133,7 @@
 	/* due to possible conflicts with stac9460_set_rate_val, mutexing */
 	mutex_lock(&spec->mute_mutex);
 	/*
-	printk(KERN_DEBUG "Mute put: reg 0x%02x, ctrl value: 0x%02x\n", idx,
+	dev_dbg(ice->card->dev, "Mute put: reg 0x%02x, ctrl value: 0x%02x\n", idx,
 	       ucontrol->value.integer.value[0]);
 	*/
 	change = stac9460_dac_mute(ice, idx, ucontrol->value.integer.value[0]);
@@ -187,7 +187,7 @@
 	if (change) {
 		ovol =  (0x7f - nvol) | (tmp & 0x80);
 		/*
-		printk(KERN_DEBUG "DAC Volume: reg 0x%02x: 0x%02x\n",
+		dev_dbg(ice->card->dev, "DAC Volume: reg 0x%02x: 0x%02x\n",
 		       idx, ovol);
 		*/
 		stac9460_put(ice, idx, (0x7f - nvol) | (tmp & 0x80));
@@ -348,7 +348,7 @@
 	for (idx = 0; idx < 7 ; ++idx)
 		changed[idx] = stac9460_dac_mute(ice,
 				STAC946X_MASTER_VOLUME + idx, 0);
-	/*printk(KERN_DEBUG "Rate change: %d, new MC: 0x%02x\n", rate, new);*/
+	/*dev_dbg(ice->card->dev, "Rate change: %d, new MC: 0x%02x\n", rate, new);*/
 	stac9460_put(ice, STAC946X_MASTER_CLOCKING, new);
 	udelay(10);
 	/* unmuting - only originally unmuted dacs -
@@ -768,9 +768,10 @@
 		/* from this moment if err = 0 then
 		 * spec->ak4114 should not be null
 		 */
-		snd_printdd("AK4114 initialized with status %d\n", err);
+		dev_dbg(ice->card->dev,
+			"AK4114 initialized with status %d\n", err);
 	} else
-		snd_printdd("AK4114 not found\n");
+		dev_dbg(ice->card->dev, "AK4114 not found\n");
 	if (err < 0)
 		return err;
 
diff --git a/sound/pci/ice1712/quartet.c b/sound/pci/ice1712/quartet.c
index 71c6003..2c2df4b 100644
--- a/sound/pci/ice1712/quartet.c
+++ b/sound/pci/ice1712/quartet.c
@@ -280,7 +280,7 @@
 
 	if (snd_BUG_ON(chip < 0 || chip >= 4))
 		return;
-	/*printk(KERN_DEBUG "Writing to AK4620: chip=%d, addr=0x%x,
+	/*dev_dbg(ice->card->dev, "Writing to AK4620: chip=%d, addr=0x%x,
 	  data=0x%x\n", chip, addr, data);*/
 	orig_dir = ice->gpio.get_dir(ice);
 	ice->gpio.set_dir(ice, orig_dir | GPIO_SPI_ALL);
@@ -898,7 +898,7 @@
 	new =  (get_cpld(ice) & ~CPLD_CKS_MASK) | get_cks_val(rate);
 	/* switch to internal clock, drop CPLD_SYNC_SEL */
 	new &= ~CPLD_SYNC_SEL;
-	/* printk(KERN_DEBUG "QT - set_rate: old %x, new %x\n",
+	/* dev_dbg(ice->card->dev, "QT - set_rate: old %x, new %x\n",
 	   get_cpld(ice), new); */
 	set_cpld(ice, new);
 }
@@ -978,7 +978,7 @@
 			c1) {
 		/* only for SPDIF master mode, rate was changed */
 		rate = snd_ak4113_external_rate(ak4113);
-		/* printk(KERN_DEBUG "ak4113 - input rate changed to %d\n",
+		/* dev_dbg(ice->card->dev, "ak4113 - input rate changed to %d\n",
 		   rate); */
 		qtet_akm_set_rate_val(ice->akm, rate);
 	}