e1000e: make ioport free
This patch makes e1000e driver ioport-free.
This corrects behavior in probe function so as not to request ioport
resources as long as they are not really needed.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index ccb8ca2..22f2fc9 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -4002,7 +4002,11 @@
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
e1000e_disable_l1aspm(pdev);
- err = pci_enable_device(pdev);
+
+ if (adapter->need_ioport)
+ err = pci_enable_device(pdev);
+ else
+ err = pci_enable_device_mem(pdev);
if (err) {
dev_err(&pdev->dev,
"Cannot enable PCI device from suspend\n");
@@ -4103,9 +4107,14 @@
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
+ int err;
e1000e_disable_l1aspm(pdev);
- if (pci_enable_device(pdev)) {
+ if (adapter->need_ioport)
+ err = pci_enable_device(pdev);
+ else
+ err = pci_enable_device_mem(pdev);
+ if (err) {
dev_err(&pdev->dev,
"Cannot re-enable PCI device after reset.\n");
return PCI_ERS_RESULT_DISCONNECT;
@@ -4184,6 +4193,21 @@
}
/**
+ * e1000e_is_need_ioport - determine if an adapter needs ioport resources or not
+ * @pdev: PCI device information struct
+ *
+ * Returns true if an adapters needs ioport resources
+ **/
+static int e1000e_is_need_ioport(struct pci_dev *pdev)
+{
+ switch (pdev->device) {
+ /* Currently there are no adapters that need ioport resources */
+ default:
+ return false;
+ }
+}
+
+/**
* e1000_probe - Device Initialization Routine
* @pdev: PCI device information struct
* @ent: entry in e1000_pci_tbl
@@ -4208,9 +4232,19 @@
int i, err, pci_using_dac;
u16 eeprom_data = 0;
u16 eeprom_apme_mask = E1000_EEPROM_APME;
+ int bars, need_ioport;
e1000e_disable_l1aspm(pdev);
- err = pci_enable_device(pdev);
+
+ /* do not allocate ioport bars when not needed */
+ need_ioport = e1000e_is_need_ioport(pdev);
+ if (need_ioport) {
+ bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO);
+ err = pci_enable_device(pdev);
+ } else {
+ bars = pci_select_bars(pdev, IORESOURCE_MEM);
+ err = pci_enable_device_mem(pdev);
+ }
if (err)
return err;
@@ -4233,7 +4267,7 @@
}
}
- err = pci_request_regions(pdev, e1000e_driver_name);
+ err = pci_request_selected_regions(pdev, bars, e1000e_driver_name);
if (err)
goto err_pci_reg;
@@ -4258,6 +4292,8 @@
adapter->hw.adapter = adapter;
adapter->hw.mac.type = ei->mac;
adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
+ adapter->bars = bars;
+ adapter->need_ioport = need_ioport;
mmio_start = pci_resource_start(pdev, 0);
mmio_len = pci_resource_len(pdev, 0);
@@ -4497,7 +4533,7 @@
err_ioremap:
free_netdev(netdev);
err_alloc_etherdev:
- pci_release_regions(pdev);
+ pci_release_selected_regions(pdev, bars);
err_pci_reg:
err_dma:
pci_disable_device(pdev);
@@ -4545,7 +4581,7 @@
iounmap(adapter->hw.hw_addr);
if (adapter->hw.flash_address)
iounmap(adapter->hw.flash_address);
- pci_release_regions(pdev);
+ pci_release_selected_regions(pdev, adapter->bars);
free_netdev(netdev);