powerpc/mpc5200: PCI write combine timer
On MPC5200 the PCI target control register (PCITCR) @ MBAR + 0xD6C is
initialized with only bit 7 (Latrule disable) set. The 8-Bit write
combine timer (Bits 24..31) should be also set to a reasonable value
_greater zero_ (0x08 = default) since setting it to 0x00 leads to
_very poor_ performance as a PCI target since external burst won't be
possible at all.
Setting the WCT to 0x08 (cache-line size) leads to good overall perfomance.
Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
index e3428dd..5a382bb 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
@@ -63,6 +63,7 @@
#define MPC52xx_PCI_TCR_P 0x01000000
#define MPC52xx_PCI_TCR_LD 0x00010000
+#define MPC52xx_PCI_TCR_WCT8 0x00000008
#define MPC52xx_PCI_TBATR_DISABLE 0x0
#define MPC52xx_PCI_TBATR_ENABLE 0x1
@@ -313,7 +314,7 @@
out_be32(&pci_regs->tbatr1,
MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_MEM );
- out_be32(&pci_regs->tcr, MPC52xx_PCI_TCR_LD);
+ out_be32(&pci_regs->tcr, MPC52xx_PCI_TCR_LD | MPC52xx_PCI_TCR_WCT8);
tmp = in_be32(&pci_regs->gscr);
#if 0