| /* generic HDLC line discipline for Linux |
| * |
| * Written by Paul Fulghum paulkf@microgate.com |
| * for Microgate Corporation |
| * |
| * Microgate and SyncLink are registered trademarks of Microgate Corporation |
| * |
| * Adapted from ppp.c, written by Michael Callahan <callahan@maths.ox.ac.uk>, |
| * Al Longyear <longyear@netcom.com>, |
| * Paul Mackerras <Paul.Mackerras@cs.anu.edu.au> |
| * |
| * Original release 01/11/99 |
| * $Id: n_hdlc.c,v 4.8 2003/05/06 21:18:51 paulkf Exp $ |
| * |
| * This code is released under the GNU General Public License (GPL) |
| * |
| * This module implements the tty line discipline N_HDLC for use with |
| * tty device drivers that support bit-synchronous HDLC communications. |
| * |
| * All HDLC data is frame oriented which means: |
| * |
| * 1. tty write calls represent one complete transmit frame of data |
| * The device driver should accept the complete frame or none of |
| * the frame (busy) in the write method. Each write call should have |
| * a byte count in the range of 2-65535 bytes (2 is min HDLC frame |
| * with 1 addr byte and 1 ctrl byte). The max byte count of 65535 |
| * should include any crc bytes required. For example, when using |
| * CCITT CRC32, 4 crc bytes are required, so the maximum size frame |
| * the application may transmit is limited to 65531 bytes. For CCITT |
| * CRC16, the maximum application frame size would be 65533. |
| * |
| * |
| * 2. receive callbacks from the device driver represents |
| * one received frame. The device driver should bypass |
| * the tty flip buffer and call the line discipline receive |
| * callback directly to avoid fragmenting or concatenating |
| * multiple frames into a single receive callback. |
| * |
| * The HDLC line discipline queues the receive frames in separate |
| * buffers so complete receive frames can be returned by the |
| * tty read calls. |
| * |
| * 3. tty read calls returns an entire frame of data or nothing. |
| * |
| * 4. all send and receive data is considered raw. No processing |
| * or translation is performed by the line discipline, regardless |
| * of the tty flags |
| * |
| * 5. When line discipline is queried for the amount of receive |
| * data available (FIOC), 0 is returned if no data available, |
| * otherwise the count of the next available frame is returned. |
| * (instead of the sum of all received frame counts). |
| * |
| * These conventions allow the standard tty programming interface |
| * to be used for synchronous HDLC applications when used with |
| * this line discipline (or another line discipline that is frame |
| * oriented such as N_PPP). |
| * |
| * The SyncLink driver (synclink.c) implements both asynchronous |
| * (using standard line discipline N_TTY) and synchronous HDLC |
| * (using N_HDLC) communications, with the latter using the above |
| * conventions. |
| * |
| * This implementation is very basic and does not maintain |
| * any statistics. The main point is to enforce the raw data |
| * and frame orientation of HDLC communications. |
| * |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES |
| * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, |
| * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED |
| * OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #define HDLC_MAGIC 0x239e |
| #define HDLC_VERSION "$Revision: 4.8 $" |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/types.h> |
| #include <linux/fcntl.h> |
| #include <linux/interrupt.h> |
| #include <linux/ptrace.h> |
| |
| #undef VERSION |
| #define VERSION(major,minor,patch) (((((major)<<8)+(minor))<<8)+(patch)) |
| |
| #include <linux/poll.h> |
| #include <linux/in.h> |
| #include <linux/ioctl.h> |
| #include <linux/slab.h> |
| #include <linux/tty.h> |
| #include <linux/errno.h> |
| #include <linux/string.h> /* used in new tty drivers */ |
| #include <linux/signal.h> /* used in new tty drivers */ |
| #include <linux/if.h> |
| #include <linux/bitops.h> |
| |
| #include <asm/system.h> |
| #include <asm/termios.h> |
| #include <asm/uaccess.h> |
| |
| /* |
| * Buffers for individual HDLC frames |
| */ |
| #define MAX_HDLC_FRAME_SIZE 65535 |
| #define DEFAULT_RX_BUF_COUNT 10 |
| #define MAX_RX_BUF_COUNT 60 |
| #define DEFAULT_TX_BUF_COUNT 1 |
| |
| struct n_hdlc_buf { |
| struct n_hdlc_buf *link; |
| int count; |
| char buf[1]; |
| }; |
| |
| #define N_HDLC_BUF_SIZE (sizeof(struct n_hdlc_buf) + maxframe) |
| |
| struct n_hdlc_buf_list { |
| struct n_hdlc_buf *head; |
| struct n_hdlc_buf *tail; |
| int count; |
| spinlock_t spinlock; |
| }; |
| |
| /** |
| * struct n_hdlc - per device instance data structure |
| * @magic - magic value for structure |
| * @flags - miscellaneous control flags |
| * @tty - ptr to TTY structure |
| * @backup_tty - TTY to use if tty gets closed |
| * @tbusy - reentrancy flag for tx wakeup code |
| * @woke_up - FIXME: describe this field |
| * @tbuf - currently transmitting tx buffer |
| * @tx_buf_list - list of pending transmit frame buffers |
| * @rx_buf_list - list of received frame buffers |
| * @tx_free_buf_list - list unused transmit frame buffers |
| * @rx_free_buf_list - list unused received frame buffers |
| */ |
| struct n_hdlc { |
| int magic; |
| __u32 flags; |
| struct tty_struct *tty; |
| struct tty_struct *backup_tty; |
| int tbusy; |
| int woke_up; |
| struct n_hdlc_buf *tbuf; |
| struct n_hdlc_buf_list tx_buf_list; |
| struct n_hdlc_buf_list rx_buf_list; |
| struct n_hdlc_buf_list tx_free_buf_list; |
| struct n_hdlc_buf_list rx_free_buf_list; |
| }; |
| |
| /* |
| * HDLC buffer list manipulation functions |
| */ |
| static void n_hdlc_buf_list_init(struct n_hdlc_buf_list *list); |
| static void n_hdlc_buf_put(struct n_hdlc_buf_list *list, |
| struct n_hdlc_buf *buf); |
| static struct n_hdlc_buf *n_hdlc_buf_get(struct n_hdlc_buf_list *list); |
| |
| /* Local functions */ |
| |
| static struct n_hdlc *n_hdlc_alloc (void); |
| |
| /* debug level can be set by insmod for debugging purposes */ |
| #define DEBUG_LEVEL_INFO 1 |
| static int debuglevel; |
| |
| /* max frame size for memory allocations */ |
| static int maxframe = 4096; |
| |
| /* TTY callbacks */ |
| |
| static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file, |
| __u8 __user *buf, size_t nr); |
| static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file, |
| const unsigned char *buf, size_t nr); |
| static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file, |
| unsigned int cmd, unsigned long arg); |
| static unsigned int n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp, |
| poll_table *wait); |
| static int n_hdlc_tty_open(struct tty_struct *tty); |
| static void n_hdlc_tty_close(struct tty_struct *tty); |
| static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *cp, |
| char *fp, int count); |
| static void n_hdlc_tty_wakeup(struct tty_struct *tty); |
| |
| #define bset(p,b) ((p)[(b) >> 5] |= (1 << ((b) & 0x1f))) |
| |
| #define tty2n_hdlc(tty) ((struct n_hdlc *) ((tty)->disc_data)) |
| #define n_hdlc2tty(n_hdlc) ((n_hdlc)->tty) |
| |
| static struct tty_ldisc_ops n_hdlc_ldisc = { |
| .owner = THIS_MODULE, |
| .magic = TTY_LDISC_MAGIC, |
| .name = "hdlc", |
| .open = n_hdlc_tty_open, |
| .close = n_hdlc_tty_close, |
| .read = n_hdlc_tty_read, |
| .write = n_hdlc_tty_write, |
| .ioctl = n_hdlc_tty_ioctl, |
| .poll = n_hdlc_tty_poll, |
| .receive_buf = n_hdlc_tty_receive, |
| .write_wakeup = n_hdlc_tty_wakeup, |
| }; |
| |
| /** |
| * n_hdlc_release - release an n_hdlc per device line discipline info structure |
| * @n_hdlc - per device line discipline info structure |
| */ |
| static void n_hdlc_release(struct n_hdlc *n_hdlc) |
| { |
| struct tty_struct *tty = n_hdlc2tty (n_hdlc); |
| struct n_hdlc_buf *buf; |
| |
| if (debuglevel >= DEBUG_LEVEL_INFO) |
| printk("%s(%d)n_hdlc_release() called\n",__FILE__,__LINE__); |
| |
| /* Ensure that the n_hdlcd process is not hanging on select()/poll() */ |
| wake_up_interruptible (&tty->read_wait); |
| wake_up_interruptible (&tty->write_wait); |
| |
| if (tty->disc_data == n_hdlc) |
| tty->disc_data = NULL; /* Break the tty->n_hdlc link */ |
| |
| /* Release transmit and receive buffers */ |
| for(;;) { |
| buf = n_hdlc_buf_get(&n_hdlc->rx_free_buf_list); |
| if (buf) { |
| kfree(buf); |
| } else |
| break; |
| } |
| for(;;) { |
| buf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list); |
| if (buf) { |
| kfree(buf); |
| } else |
| break; |
| } |
| for(;;) { |
| buf = n_hdlc_buf_get(&n_hdlc->rx_buf_list); |
| if (buf) { |
| kfree(buf); |
| } else |
| break; |
| } |
| for(;;) { |
| buf = n_hdlc_buf_get(&n_hdlc->tx_buf_list); |
| if (buf) { |
| kfree(buf); |
| } else |
| break; |
| } |
| kfree(n_hdlc->tbuf); |
| kfree(n_hdlc); |
| |
| } /* end of n_hdlc_release() */ |
| |
| /** |
| * n_hdlc_tty_close - line discipline close |
| * @tty - pointer to tty info structure |
| * |
| * Called when the line discipline is changed to something |
| * else, the tty is closed, or the tty detects a hangup. |
| */ |
| static void n_hdlc_tty_close(struct tty_struct *tty) |
| { |
| struct n_hdlc *n_hdlc = tty2n_hdlc (tty); |
| |
| if (debuglevel >= DEBUG_LEVEL_INFO) |
| printk("%s(%d)n_hdlc_tty_close() called\n",__FILE__,__LINE__); |
| |
| if (n_hdlc != NULL) { |
| if (n_hdlc->magic != HDLC_MAGIC) { |
| printk (KERN_WARNING"n_hdlc: trying to close unopened tty!\n"); |
| return; |
| } |
| #if defined(TTY_NO_WRITE_SPLIT) |
| clear_bit(TTY_NO_WRITE_SPLIT,&tty->flags); |
| #endif |
| tty->disc_data = NULL; |
| if (tty == n_hdlc->backup_tty) |
| n_hdlc->backup_tty = NULL; |
| if (tty != n_hdlc->tty) |
| return; |
| if (n_hdlc->backup_tty) { |
| n_hdlc->tty = n_hdlc->backup_tty; |
| } else { |
| n_hdlc_release (n_hdlc); |
| } |
| } |
| |
| if (debuglevel >= DEBUG_LEVEL_INFO) |
| printk("%s(%d)n_hdlc_tty_close() success\n",__FILE__,__LINE__); |
| |
| } /* end of n_hdlc_tty_close() */ |
| |
| /** |
| * n_hdlc_tty_open - called when line discipline changed to n_hdlc |
| * @tty - pointer to tty info structure |
| * |
| * Returns 0 if success, otherwise error code |
| */ |
| static int n_hdlc_tty_open (struct tty_struct *tty) |
| { |
| struct n_hdlc *n_hdlc = tty2n_hdlc (tty); |
| |
| if (debuglevel >= DEBUG_LEVEL_INFO) |
| printk("%s(%d)n_hdlc_tty_open() called (device=%s)\n", |
| __FILE__,__LINE__, |
| tty->name); |
| |
| /* There should not be an existing table for this slot. */ |
| if (n_hdlc) { |
| printk (KERN_ERR"n_hdlc_tty_open:tty already associated!\n" ); |
| return -EEXIST; |
| } |
| |
| n_hdlc = n_hdlc_alloc(); |
| if (!n_hdlc) { |
| printk (KERN_ERR "n_hdlc_alloc failed\n"); |
| return -ENFILE; |
| } |
| |
| tty->disc_data = n_hdlc; |
| n_hdlc->tty = tty; |
| tty->receive_room = 65536; |
| |
| #if defined(TTY_NO_WRITE_SPLIT) |
| /* change tty_io write() to not split large writes into 8K chunks */ |
| set_bit(TTY_NO_WRITE_SPLIT,&tty->flags); |
| #endif |
| |
| /* Flush any pending characters in the driver and discipline. */ |
| if (tty->ldisc.ops->flush_buffer) |
| tty->ldisc.ops->flush_buffer(tty); |
| |
| tty_driver_flush_buffer(tty); |
| |
| if (debuglevel >= DEBUG_LEVEL_INFO) |
| printk("%s(%d)n_hdlc_tty_open() success\n",__FILE__,__LINE__); |
| |
| return 0; |
| |
| } /* end of n_tty_hdlc_open() */ |
| |
| /** |
| * n_hdlc_send_frames - send frames on pending send buffer list |
| * @n_hdlc - pointer to ldisc instance data |
| * @tty - pointer to tty instance data |
| * |
| * Send frames on pending send buffer list until the driver does not accept a |
| * frame (busy) this function is called after adding a frame to the send buffer |
| * list and by the tty wakeup callback. |
| */ |
| static void n_hdlc_send_frames(struct n_hdlc *n_hdlc, struct tty_struct *tty) |
| { |
| register int actual; |
| unsigned long flags; |
| struct n_hdlc_buf *tbuf; |
| |
| if (debuglevel >= DEBUG_LEVEL_INFO) |
| printk("%s(%d)n_hdlc_send_frames() called\n",__FILE__,__LINE__); |
| check_again: |
| |
| spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags); |
| if (n_hdlc->tbusy) { |
| n_hdlc->woke_up = 1; |
| spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags); |
| return; |
| } |
| n_hdlc->tbusy = 1; |
| n_hdlc->woke_up = 0; |
| spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags); |
| |
| /* get current transmit buffer or get new transmit */ |
| /* buffer from list of pending transmit buffers */ |
| |
| tbuf = n_hdlc->tbuf; |
| if (!tbuf) |
| tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list); |
| |
| while (tbuf) { |
| if (debuglevel >= DEBUG_LEVEL_INFO) |
| printk("%s(%d)sending frame %p, count=%d\n", |
| __FILE__,__LINE__,tbuf,tbuf->count); |
| |
| /* Send the next block of data to device */ |
| tty->flags |= (1 << TTY_DO_WRITE_WAKEUP); |
| actual = tty->ops->write(tty, tbuf->buf, tbuf->count); |
| |
| /* rollback was possible and has been done */ |
| if (actual == -ERESTARTSYS) { |
| n_hdlc->tbuf = tbuf; |
| break; |
| } |
| /* if transmit error, throw frame away by */ |
| /* pretending it was accepted by driver */ |
| if (actual < 0) |
| actual = tbuf->count; |
| |
| if (actual == tbuf->count) { |
| if (debuglevel >= DEBUG_LEVEL_INFO) |
| printk("%s(%d)frame %p completed\n", |
| __FILE__,__LINE__,tbuf); |
| |
| /* free current transmit buffer */ |
| n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, tbuf); |
| |
| /* this tx buffer is done */ |
| n_hdlc->tbuf = NULL; |
| |
| /* wait up sleeping writers */ |
| wake_up_interruptible(&tty->write_wait); |
| |
| /* get next pending transmit buffer */ |
| tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list); |
| } else { |
| if (debuglevel >= DEBUG_LEVEL_INFO) |
| printk("%s(%d)frame %p pending\n", |
| __FILE__,__LINE__,tbuf); |
| |
| /* buffer not accepted by driver */ |
| /* set this buffer as pending buffer */ |
| n_hdlc->tbuf = tbuf; |
| break; |
| } |
| } |
| |
| if (!tbuf) |
| tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP); |
| |
| /* Clear the re-entry flag */ |
| spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags); |
| n_hdlc->tbusy = 0; |
| spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags); |
| |
| if (n_hdlc->woke_up) |
| goto check_again; |
| |
| if (debuglevel >= DEBUG_LEVEL_INFO) |
| printk("%s(%d)n_hdlc_send_frames() exit\n",__FILE__,__LINE__); |
| |
| } /* end of n_hdlc_send_frames() */ |
| |
| /** |
| * n_hdlc_tty_wakeup - Callback for transmit wakeup |
| * @tty - pointer to associated tty instance data |
| * |
| * Called when low level device driver can accept more send data. |
| */ |
| static void n_hdlc_tty_wakeup(struct tty_struct *tty) |
| { |
| struct n_hdlc *n_hdlc = tty2n_hdlc(tty); |
| |
| if (debuglevel >= DEBUG_LEVEL_INFO) |
| printk("%s(%d)n_hdlc_tty_wakeup() called\n",__FILE__,__LINE__); |
| |
| if (!n_hdlc) |
| return; |
| |
| if (tty != n_hdlc->tty) { |
| tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP); |
| return; |
| } |
| |
| n_hdlc_send_frames (n_hdlc, tty); |
| |
| } /* end of n_hdlc_tty_wakeup() */ |
| |
| /** |
| * n_hdlc_tty_receive - Called by tty driver when receive data is available |
| * @tty - pointer to tty instance data |
| * @data - pointer to received data |
| * @flags - pointer to flags for data |
| * @count - count of received data in bytes |
| * |
| * Called by tty low level driver when receive data is available. Data is |
| * interpreted as one HDLC frame. |
| */ |
| static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *data, |
| char *flags, int count) |
| { |
| register struct n_hdlc *n_hdlc = tty2n_hdlc (tty); |
| register struct n_hdlc_buf *buf; |
| |
| if (debuglevel >= DEBUG_LEVEL_INFO) |
| printk("%s(%d)n_hdlc_tty_receive() called count=%d\n", |
| __FILE__,__LINE__, count); |
| |
| /* This can happen if stuff comes in on the backup tty */ |
| if (!n_hdlc || tty != n_hdlc->tty) |
| return; |
| |
| /* verify line is using HDLC discipline */ |
| if (n_hdlc->magic != HDLC_MAGIC) { |
| printk("%s(%d) line not using HDLC discipline\n", |
| __FILE__,__LINE__); |
| return; |
| } |
| |
| if ( count>maxframe ) { |
| if (debuglevel >= DEBUG_LEVEL_INFO) |
| printk("%s(%d) rx count>maxframesize, data discarded\n", |
| __FILE__,__LINE__); |
| return; |
| } |
| |
| /* get a free HDLC buffer */ |
| buf = n_hdlc_buf_get(&n_hdlc->rx_free_buf_list); |
| if (!buf) { |
| /* no buffers in free list, attempt to allocate another rx buffer */ |
| /* unless the maximum count has been reached */ |
| if (n_hdlc->rx_buf_list.count < MAX_RX_BUF_COUNT) |
| buf = kmalloc(N_HDLC_BUF_SIZE, GFP_ATOMIC); |
| } |
| |
| if (!buf) { |
| if (debuglevel >= DEBUG_LEVEL_INFO) |
| printk("%s(%d) no more rx buffers, data discarded\n", |
| __FILE__,__LINE__); |
| return; |
| } |
| |
| /* copy received data to HDLC buffer */ |
| memcpy(buf->buf,data,count); |
| buf->count=count; |
| |
| /* add HDLC buffer to list of received frames */ |
| n_hdlc_buf_put(&n_hdlc->rx_buf_list, buf); |
| |
| /* wake up any blocked reads and perform async signalling */ |
| wake_up_interruptible (&tty->read_wait); |
| if (n_hdlc->tty->fasync != NULL) |
| kill_fasync (&n_hdlc->tty->fasync, SIGIO, POLL_IN); |
| |
| } /* end of n_hdlc_tty_receive() */ |
| |
| /** |
| * n_hdlc_tty_read - Called to retrieve one frame of data (if available) |
| * @tty - pointer to tty instance data |
| * @file - pointer to open file object |
| * @buf - pointer to returned data buffer |
| * @nr - size of returned data buffer |
| * |
| * Returns the number of bytes returned or error code. |
| */ |
| static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file, |
| __u8 __user *buf, size_t nr) |
| { |
| struct n_hdlc *n_hdlc = tty2n_hdlc(tty); |
| int ret; |
| struct n_hdlc_buf *rbuf; |
| |
| if (debuglevel >= DEBUG_LEVEL_INFO) |
| printk("%s(%d)n_hdlc_tty_read() called\n",__FILE__,__LINE__); |
| |
| /* Validate the pointers */ |
| if (!n_hdlc) |
| return -EIO; |
| |
| /* verify user access to buffer */ |
| if (!access_ok(VERIFY_WRITE, buf, nr)) { |
| printk(KERN_WARNING "%s(%d) n_hdlc_tty_read() can't verify user " |
| "buffer\n", __FILE__, __LINE__); |
| return -EFAULT; |
| } |
| |
| lock_kernel(); |
| |
| for (;;) { |
| if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) { |
| unlock_kernel(); |
| return -EIO; |
| } |
| |
| n_hdlc = tty2n_hdlc (tty); |
| if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC || |
| tty != n_hdlc->tty) { |
| unlock_kernel(); |
| return 0; |
| } |
| |
| rbuf = n_hdlc_buf_get(&n_hdlc->rx_buf_list); |
| if (rbuf) |
| break; |
| |
| /* no data */ |
| if (file->f_flags & O_NONBLOCK) { |
| unlock_kernel(); |
| return -EAGAIN; |
| } |
| |
| interruptible_sleep_on (&tty->read_wait); |
| if (signal_pending(current)) { |
| unlock_kernel(); |
| return -EINTR; |
| } |
| } |
| |
| if (rbuf->count > nr) |
| /* frame too large for caller's buffer (discard frame) */ |
| ret = -EOVERFLOW; |
| else { |
| /* Copy the data to the caller's buffer */ |
| if (copy_to_user(buf, rbuf->buf, rbuf->count)) |
| ret = -EFAULT; |
| else |
| ret = rbuf->count; |
| } |
| |
| /* return HDLC buffer to free list unless the free list */ |
| /* count has exceeded the default value, in which case the */ |
| /* buffer is freed back to the OS to conserve memory */ |
| if (n_hdlc->rx_free_buf_list.count > DEFAULT_RX_BUF_COUNT) |
| kfree(rbuf); |
| else |
| n_hdlc_buf_put(&n_hdlc->rx_free_buf_list,rbuf); |
| unlock_kernel(); |
| return ret; |
| |
| } /* end of n_hdlc_tty_read() */ |
| |
| /** |
| * n_hdlc_tty_write - write a single frame of data to device |
| * @tty - pointer to associated tty device instance data |
| * @file - pointer to file object data |
| * @data - pointer to transmit data (one frame) |
| * @count - size of transmit frame in bytes |
| * |
| * Returns the number of bytes written (or error code). |
| */ |
| static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file, |
| const unsigned char *data, size_t count) |
| { |
| struct n_hdlc *n_hdlc = tty2n_hdlc (tty); |
| int error = 0; |
| DECLARE_WAITQUEUE(wait, current); |
| struct n_hdlc_buf *tbuf; |
| |
| if (debuglevel >= DEBUG_LEVEL_INFO) |
| printk("%s(%d)n_hdlc_tty_write() called count=%Zd\n", |
| __FILE__,__LINE__,count); |
| |
| /* Verify pointers */ |
| if (!n_hdlc) |
| return -EIO; |
| |
| if (n_hdlc->magic != HDLC_MAGIC) |
| return -EIO; |
| |
| /* verify frame size */ |
| if (count > maxframe ) { |
| if (debuglevel & DEBUG_LEVEL_INFO) |
| printk (KERN_WARNING |
| "n_hdlc_tty_write: truncating user packet " |
| "from %lu to %d\n", (unsigned long) count, |
| maxframe ); |
| count = maxframe; |
| } |
| |
| lock_kernel(); |
| |
| add_wait_queue(&tty->write_wait, &wait); |
| set_current_state(TASK_INTERRUPTIBLE); |
| |
| /* Allocate transmit buffer */ |
| /* sleep until transmit buffer available */ |
| while (!(tbuf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list))) { |
| schedule(); |
| |
| n_hdlc = tty2n_hdlc (tty); |
| if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC || |
| tty != n_hdlc->tty) { |
| printk("n_hdlc_tty_write: %p invalid after wait!\n", n_hdlc); |
| error = -EIO; |
| break; |
| } |
| |
| if (signal_pending(current)) { |
| error = -EINTR; |
| break; |
| } |
| } |
| |
| set_current_state(TASK_RUNNING); |
| remove_wait_queue(&tty->write_wait, &wait); |
| |
| if (!error) { |
| /* Retrieve the user's buffer */ |
| memcpy(tbuf->buf, data, count); |
| |
| /* Send the data */ |
| tbuf->count = error = count; |
| n_hdlc_buf_put(&n_hdlc->tx_buf_list,tbuf); |
| n_hdlc_send_frames(n_hdlc,tty); |
| } |
| unlock_kernel(); |
| return error; |
| |
| } /* end of n_hdlc_tty_write() */ |
| |
| /** |
| * n_hdlc_tty_ioctl - process IOCTL system call for the tty device. |
| * @tty - pointer to tty instance data |
| * @file - pointer to open file object for device |
| * @cmd - IOCTL command code |
| * @arg - argument for IOCTL call (cmd dependent) |
| * |
| * Returns command dependent result. |
| */ |
| static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| struct n_hdlc *n_hdlc = tty2n_hdlc (tty); |
| int error = 0; |
| int count; |
| unsigned long flags; |
| |
| if (debuglevel >= DEBUG_LEVEL_INFO) |
| printk("%s(%d)n_hdlc_tty_ioctl() called %d\n", |
| __FILE__,__LINE__,cmd); |
| |
| /* Verify the status of the device */ |
| if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC) |
| return -EBADF; |
| |
| switch (cmd) { |
| case FIONREAD: |
| /* report count of read data available */ |
| /* in next available frame (if any) */ |
| spin_lock_irqsave(&n_hdlc->rx_buf_list.spinlock,flags); |
| if (n_hdlc->rx_buf_list.head) |
| count = n_hdlc->rx_buf_list.head->count; |
| else |
| count = 0; |
| spin_unlock_irqrestore(&n_hdlc->rx_buf_list.spinlock,flags); |
| error = put_user(count, (int __user *)arg); |
| break; |
| |
| case TIOCOUTQ: |
| /* get the pending tx byte count in the driver */ |
| count = tty_chars_in_buffer(tty); |
| /* add size of next output frame in queue */ |
| spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock,flags); |
| if (n_hdlc->tx_buf_list.head) |
| count += n_hdlc->tx_buf_list.head->count; |
| spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock,flags); |
| error = put_user(count, (int __user *)arg); |
| break; |
| |
| default: |
| error = n_tty_ioctl (tty, file, cmd, arg); |
| break; |
| } |
| return error; |
| |
| } /* end of n_hdlc_tty_ioctl() */ |
| |
| /** |
| * n_hdlc_tty_poll - TTY callback for poll system call |
| * @tty - pointer to tty instance data |
| * @filp - pointer to open file object for device |
| * @poll_table - wait queue for operations |
| * |
| * Determine which operations (read/write) will not block and return info |
| * to caller. |
| * Returns a bit mask containing info on which ops will not block. |
| */ |
| static unsigned int n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp, |
| poll_table *wait) |
| { |
| struct n_hdlc *n_hdlc = tty2n_hdlc (tty); |
| unsigned int mask = 0; |
| |
| if (debuglevel >= DEBUG_LEVEL_INFO) |
| printk("%s(%d)n_hdlc_tty_poll() called\n",__FILE__,__LINE__); |
| |
| if (n_hdlc && n_hdlc->magic == HDLC_MAGIC && tty == n_hdlc->tty) { |
| /* queue current process into any wait queue that */ |
| /* may awaken in the future (read and write) */ |
| |
| poll_wait(filp, &tty->read_wait, wait); |
| poll_wait(filp, &tty->write_wait, wait); |
| |
| /* set bits for operations that won't block */ |
| if (n_hdlc->rx_buf_list.head) |
| mask |= POLLIN | POLLRDNORM; /* readable */ |
| if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) |
| mask |= POLLHUP; |
| if (tty_hung_up_p(filp)) |
| mask |= POLLHUP; |
| if (!tty_is_writelocked(tty) && |
| n_hdlc->tx_free_buf_list.head) |
| mask |= POLLOUT | POLLWRNORM; /* writable */ |
| } |
| return mask; |
| } /* end of n_hdlc_tty_poll() */ |
| |
| /** |
| * n_hdlc_alloc - allocate an n_hdlc instance data structure |
| * |
| * Returns a pointer to newly created structure if success, otherwise %NULL |
| */ |
| static struct n_hdlc *n_hdlc_alloc(void) |
| { |
| struct n_hdlc_buf *buf; |
| int i; |
| struct n_hdlc *n_hdlc = kmalloc(sizeof(*n_hdlc), GFP_KERNEL); |
| |
| if (!n_hdlc) |
| return NULL; |
| |
| memset(n_hdlc, 0, sizeof(*n_hdlc)); |
| |
| n_hdlc_buf_list_init(&n_hdlc->rx_free_buf_list); |
| n_hdlc_buf_list_init(&n_hdlc->tx_free_buf_list); |
| n_hdlc_buf_list_init(&n_hdlc->rx_buf_list); |
| n_hdlc_buf_list_init(&n_hdlc->tx_buf_list); |
| |
| /* allocate free rx buffer list */ |
| for(i=0;i<DEFAULT_RX_BUF_COUNT;i++) { |
| buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL); |
| if (buf) |
| n_hdlc_buf_put(&n_hdlc->rx_free_buf_list,buf); |
| else if (debuglevel >= DEBUG_LEVEL_INFO) |
| printk("%s(%d)n_hdlc_alloc(), kalloc() failed for rx buffer %d\n",__FILE__,__LINE__, i); |
| } |
| |
| /* allocate free tx buffer list */ |
| for(i=0;i<DEFAULT_TX_BUF_COUNT;i++) { |
| buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL); |
| if (buf) |
| n_hdlc_buf_put(&n_hdlc->tx_free_buf_list,buf); |
| else if (debuglevel >= DEBUG_LEVEL_INFO) |
| printk("%s(%d)n_hdlc_alloc(), kalloc() failed for tx buffer %d\n",__FILE__,__LINE__, i); |
| } |
| |
| /* Initialize the control block */ |
| n_hdlc->magic = HDLC_MAGIC; |
| n_hdlc->flags = 0; |
| |
| return n_hdlc; |
| |
| } /* end of n_hdlc_alloc() */ |
| |
| /** |
| * n_hdlc_buf_list_init - initialize specified HDLC buffer list |
| * @list - pointer to buffer list |
| */ |
| static void n_hdlc_buf_list_init(struct n_hdlc_buf_list *list) |
| { |
| memset(list, 0, sizeof(*list)); |
| spin_lock_init(&list->spinlock); |
| } /* end of n_hdlc_buf_list_init() */ |
| |
| /** |
| * n_hdlc_buf_put - add specified HDLC buffer to tail of specified list |
| * @list - pointer to buffer list |
| * @buf - pointer to buffer |
| */ |
| static void n_hdlc_buf_put(struct n_hdlc_buf_list *list, |
| struct n_hdlc_buf *buf) |
| { |
| unsigned long flags; |
| spin_lock_irqsave(&list->spinlock,flags); |
| |
| buf->link=NULL; |
| if (list->tail) |
| list->tail->link = buf; |
| else |
| list->head = buf; |
| list->tail = buf; |
| (list->count)++; |
| |
| spin_unlock_irqrestore(&list->spinlock,flags); |
| |
| } /* end of n_hdlc_buf_put() */ |
| |
| /** |
| * n_hdlc_buf_get - remove and return an HDLC buffer from list |
| * @list - pointer to HDLC buffer list |
| * |
| * Remove and return an HDLC buffer from the head of the specified HDLC buffer |
| * list. |
| * Returns a pointer to HDLC buffer if available, otherwise %NULL. |
| */ |
| static struct n_hdlc_buf* n_hdlc_buf_get(struct n_hdlc_buf_list *list) |
| { |
| unsigned long flags; |
| struct n_hdlc_buf *buf; |
| spin_lock_irqsave(&list->spinlock,flags); |
| |
| buf = list->head; |
| if (buf) { |
| list->head = buf->link; |
| (list->count)--; |
| } |
| if (!list->head) |
| list->tail = NULL; |
| |
| spin_unlock_irqrestore(&list->spinlock,flags); |
| return buf; |
| |
| } /* end of n_hdlc_buf_get() */ |
| |
| static char hdlc_banner[] __initdata = |
| KERN_INFO "HDLC line discipline: version " HDLC_VERSION |
| ", maxframe=%u\n"; |
| static char hdlc_register_ok[] __initdata = |
| KERN_INFO "N_HDLC line discipline registered.\n"; |
| static char hdlc_register_fail[] __initdata = |
| KERN_ERR "error registering line discipline: %d\n"; |
| static char hdlc_init_fail[] __initdata = |
| KERN_INFO "N_HDLC: init failure %d\n"; |
| |
| static int __init n_hdlc_init(void) |
| { |
| int status; |
| |
| /* range check maxframe arg */ |
| if (maxframe < 4096) |
| maxframe = 4096; |
| else if (maxframe > 65535) |
| maxframe = 65535; |
| |
| printk(hdlc_banner, maxframe); |
| |
| status = tty_register_ldisc(N_HDLC, &n_hdlc_ldisc); |
| if (!status) |
| printk(hdlc_register_ok); |
| else |
| printk(hdlc_register_fail, status); |
| |
| if (status) |
| printk(hdlc_init_fail, status); |
| return status; |
| |
| } /* end of init_module() */ |
| |
| static char hdlc_unregister_ok[] __exitdata = |
| KERN_INFO "N_HDLC: line discipline unregistered\n"; |
| static char hdlc_unregister_fail[] __exitdata = |
| KERN_ERR "N_HDLC: can't unregister line discipline (err = %d)\n"; |
| |
| static void __exit n_hdlc_exit(void) |
| { |
| /* Release tty registration of line discipline */ |
| int status = tty_unregister_ldisc(N_HDLC); |
| |
| if (status) |
| printk(hdlc_unregister_fail, status); |
| else |
| printk(hdlc_unregister_ok); |
| } |
| |
| module_init(n_hdlc_init); |
| module_exit(n_hdlc_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Paul Fulghum paulkf@microgate.com"); |
| module_param(debuglevel, int, 0); |
| module_param(maxframe, int, 0); |
| MODULE_ALIAS_LDISC(N_HDLC); |