Drivers: scsi: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option. As a result, the __dev*
markings need to be removed.
This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.
Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.
Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Adam Radford <linuxraid@lsi.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index bf54aaf..b8dd050 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -47,7 +47,7 @@
* read_main_config_table - read the configure table and save it.
* @pm8001_ha: our hba card information
*/
-static void __devinit read_main_config_table(struct pm8001_hba_info *pm8001_ha)
+static void read_main_config_table(struct pm8001_hba_info *pm8001_ha)
{
void __iomem *address = pm8001_ha->main_cfg_tbl_addr;
pm8001_ha->main_cfg_tbl.signature = pm8001_mr32(address, 0x00);
@@ -83,8 +83,7 @@
* read_general_status_table - read the general status table and save it.
* @pm8001_ha: our hba card information
*/
-static void __devinit
-read_general_status_table(struct pm8001_hba_info *pm8001_ha)
+static void read_general_status_table(struct pm8001_hba_info *pm8001_ha)
{
void __iomem *address = pm8001_ha->general_stat_tbl_addr;
pm8001_ha->gs_tbl.gst_len_mpistate = pm8001_mr32(address, 0x00);
@@ -118,8 +117,7 @@
* read_inbnd_queue_table - read the inbound queue table and save it.
* @pm8001_ha: our hba card information
*/
-static void __devinit
-read_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
+static void read_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
{
int inbQ_num = 1;
int i;
@@ -137,8 +135,7 @@
* read_outbnd_queue_table - read the outbound queue table and save it.
* @pm8001_ha: our hba card information
*/
-static void __devinit
-read_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
+static void read_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
{
int outbQ_num = 1;
int i;
@@ -156,8 +153,7 @@
* init_default_table_values - init the default table.
* @pm8001_ha: our hba card information
*/
-static void __devinit
-init_default_table_values(struct pm8001_hba_info *pm8001_ha)
+static void init_default_table_values(struct pm8001_hba_info *pm8001_ha)
{
int qn = 1;
int i;
@@ -250,8 +246,7 @@
* update_main_config_table - update the main default table to the HBA.
* @pm8001_ha: our hba card information
*/
-static void __devinit
-update_main_config_table(struct pm8001_hba_info *pm8001_ha)
+static void update_main_config_table(struct pm8001_hba_info *pm8001_ha)
{
void __iomem *address = pm8001_ha->main_cfg_tbl_addr;
pm8001_mw32(address, 0x24,
@@ -297,8 +292,8 @@
* update_inbnd_queue_table - update the inbound queue table to the HBA.
* @pm8001_ha: our hba card information
*/
-static void __devinit
-update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha, int number)
+static void update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha,
+ int number)
{
void __iomem *address = pm8001_ha->inbnd_q_tbl_addr;
u16 offset = number * 0x20;
@@ -318,8 +313,8 @@
* update_outbnd_queue_table - update the outbound queue table to the HBA.
* @pm8001_ha: our hba card information
*/
-static void __devinit
-update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha, int number)
+static void update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha,
+ int number)
{
void __iomem *address = pm8001_ha->outbnd_q_tbl_addr;
u16 offset = number * 0x24;
@@ -370,8 +365,8 @@
* @pm8001_ha: our hba card information
* @SSCbit: set SSCbit to 0 to disable all phys ssc; 1 to enable all phys ssc.
*/
-static void __devinit
-mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, u32 SSCbit)
+static void mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha,
+ u32 SSCbit)
{
u32 value, offset, i;
unsigned long flags;
@@ -438,9 +433,8 @@
* @pm8001_ha: our hba card information
* @interval - interval time for each OPEN_REJECT (RETRY). The units are in 1us.
*/
-static void __devinit
-mpi_set_open_retry_interval_reg(struct pm8001_hba_info *pm8001_ha,
- u32 interval)
+static void mpi_set_open_retry_interval_reg(struct pm8001_hba_info *pm8001_ha,
+ u32 interval)
{
u32 offset;
u32 value;
@@ -601,7 +595,7 @@
* pm8001_chip_init - the main init function that initialize whole PM8001 chip.
* @pm8001_ha: our hba card information
*/
-static int __devinit pm8001_chip_init(struct pm8001_hba_info *pm8001_ha)
+static int pm8001_chip_init(struct pm8001_hba_info *pm8001_ha)
{
/* check the firmware status */
if (-1 == check_fw_ready(pm8001_ha)) {