mfd: max77686: Convert to use regmap_irq
By using the generic IRQ support in the Register map API, it
is possible to get rid max77686-irq.c and simplify the code.
Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c
index ce869ac..3cb41d0 100644
--- a/drivers/mfd/max77686.c
+++ b/drivers/mfd/max77686.c
@@ -25,6 +25,8 @@
#include <linux/export.h>
#include <linux/slab.h>
#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
#include <linux/pm_runtime.h>
#include <linux/module.h>
#include <linux/mfd/core.h>
@@ -46,6 +48,54 @@
.val_bits = 8,
};
+static struct regmap_config max77686_rtc_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static const struct regmap_irq max77686_irqs[] = {
+ /* INT1 interrupts */
+ { .reg_offset = 0, .mask = MAX77686_INT1_PWRONF_MSK, },
+ { .reg_offset = 0, .mask = MAX77686_INT1_PWRONR_MSK, },
+ { .reg_offset = 0, .mask = MAX77686_INT1_JIGONBF_MSK, },
+ { .reg_offset = 0, .mask = MAX77686_INT1_JIGONBR_MSK, },
+ { .reg_offset = 0, .mask = MAX77686_INT1_ACOKBF_MSK, },
+ { .reg_offset = 0, .mask = MAX77686_INT1_ACOKBR_MSK, },
+ { .reg_offset = 0, .mask = MAX77686_INT1_ONKEY1S_MSK, },
+ { .reg_offset = 0, .mask = MAX77686_INT1_MRSTB_MSK, },
+ /* INT2 interrupts */
+ { .reg_offset = 1, .mask = MAX77686_INT2_140C_MSK, },
+ { .reg_offset = 1, .mask = MAX77686_INT2_120C_MSK, },
+};
+
+static const struct regmap_irq_chip max77686_irq_chip = {
+ .name = "max77686-pmic",
+ .status_base = MAX77686_REG_INT1,
+ .mask_base = MAX77686_REG_INT1MSK,
+ .num_regs = 2,
+ .irqs = max77686_irqs,
+ .num_irqs = ARRAY_SIZE(max77686_irqs),
+};
+
+static const struct regmap_irq max77686_rtc_irqs[] = {
+ /* RTC interrupts */
+ { .reg_offset = 0, .mask = MAX77686_RTCINT_RTC60S_MSK, },
+ { .reg_offset = 0, .mask = MAX77686_RTCINT_RTCA1_MSK, },
+ { .reg_offset = 0, .mask = MAX77686_RTCINT_RTCA2_MSK, },
+ { .reg_offset = 0, .mask = MAX77686_RTCINT_SMPL_MSK, },
+ { .reg_offset = 0, .mask = MAX77686_RTCINT_RTC1S_MSK, },
+ { .reg_offset = 0, .mask = MAX77686_RTCINT_WTSR_MSK, },
+};
+
+static const struct regmap_irq_chip max77686_rtc_irq_chip = {
+ .name = "max77686-rtc",
+ .status_base = MAX77686_RTC_INT,
+ .mask_base = MAX77686_RTC_INTM,
+ .num_regs = 1,
+ .irqs = max77686_rtc_irqs,
+ .num_irqs = ARRAY_SIZE(max77686_rtc_irqs),
+};
+
#ifdef CONFIG_OF
static const struct of_device_id max77686_pmic_dt_match[] = {
{.compatible = "maxim,max77686", .data = NULL},
@@ -101,7 +151,6 @@
max77686->type = id->driver_data;
max77686->wakeup = pdata->wakeup;
- max77686->irq_gpio = pdata->irq_gpio;
max77686->irq = i2c->irq;
max77686->regmap = devm_regmap_init_i2c(i2c, &max77686_regmap_config);
@@ -117,8 +166,7 @@
dev_err(max77686->dev,
"device not found on this channel (this is not an error)\n");
return -ENODEV;
- } else
- dev_info(max77686->dev, "device found\n");
+ }
max77686->rtc = i2c_new_dummy(i2c->adapter, I2C_ADDR_RTC);
if (!max77686->rtc) {
@@ -127,15 +175,48 @@
}
i2c_set_clientdata(max77686->rtc, max77686);
- max77686_irq_init(max77686);
+ max77686->rtc_regmap = devm_regmap_init_i2c(max77686->rtc,
+ &max77686_rtc_regmap_config);
+ if (IS_ERR(max77686->rtc_regmap)) {
+ ret = PTR_ERR(max77686->rtc_regmap);
+ dev_err(max77686->dev, "failed to allocate RTC regmap: %d\n",
+ ret);
+ goto err_unregister_i2c;
+ }
+
+ ret = regmap_add_irq_chip(max77686->regmap, max77686->irq,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT |
+ IRQF_SHARED, 0, &max77686_irq_chip,
+ &max77686->irq_data);
+ if (ret != 0) {
+ dev_err(&i2c->dev, "failed to add PMIC irq chip: %d\n", ret);
+ goto err_unregister_i2c;
+ }
+ ret = regmap_add_irq_chip(max77686->rtc_regmap, max77686->irq,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT |
+ IRQF_SHARED, 0, &max77686_rtc_irq_chip,
+ &max77686->rtc_irq_data);
+ if (ret != 0) {
+ dev_err(&i2c->dev, "failed to add RTC irq chip: %d\n", ret);
+ goto err_del_irqc;
+ }
ret = mfd_add_devices(max77686->dev, -1, max77686_devs,
ARRAY_SIZE(max77686_devs), NULL, 0, NULL);
if (ret < 0) {
- mfd_remove_devices(max77686->dev);
- i2c_unregister_device(max77686->rtc);
+ dev_err(&i2c->dev, "failed to add MFD devices: %d\n", ret);
+ goto err_del_rtc_irqc;
}
+ return 0;
+
+err_del_rtc_irqc:
+ regmap_del_irq_chip(max77686->irq, max77686->rtc_irq_data);
+err_del_irqc:
+ regmap_del_irq_chip(max77686->irq, max77686->irq_data);
+err_unregister_i2c:
+ i2c_unregister_device(max77686->rtc);
+
return ret;
}
@@ -144,6 +225,10 @@
struct max77686_dev *max77686 = i2c_get_clientdata(i2c);
mfd_remove_devices(max77686->dev);
+
+ regmap_del_irq_chip(max77686->irq, max77686->rtc_irq_data);
+ regmap_del_irq_chip(max77686->irq, max77686->irq_data);
+
i2c_unregister_device(max77686->rtc);
return 0;