| /* Copyright (c) 2016-2017, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <dt-bindings/spmi/spmi.h> |
| #include "sdm845-pmic-overlay.dtsi" |
| #include "sdm845-pinctrl-overlay.dtsi" |
| |
| &ufsphy_mem { |
| compatible = "qcom,ufs-phy-qrbtc-sdm845"; |
| |
| vdda-phy-supply = <&pm8998_l1>; |
| vdda-pll-supply = <&pm8998_l2>; |
| vdda-phy-max-microamp = <44000>; |
| vdda-pll-max-microamp = <14600>; |
| |
| status = "ok"; |
| }; |
| |
| &ufshc_mem { |
| limit-tx-hs-gear = <1>; |
| limit-rx-hs-gear = <1>; |
| scsi-cmd-timeout = <300000>; |
| |
| vdd-hba-supply = <&ufs_phy_gdsc>; |
| vdd-hba-fixed-regulator; |
| vcc-supply = <&pm8998_l20>; |
| vccq2-supply = <&pm8998_s4>; |
| vcc-max-microamp = <600000>; |
| vccq2-max-microamp = <600000>; |
| |
| qcom,vddp-ref-clk-supply = <&pm8998_l26>; |
| qcom,vddp-ref-clk-max-microamp = <100>; |
| |
| qcom,disable-lpm; |
| rpm-level = <0>; |
| spm-level = <0>; |
| status = "ok"; |
| }; |
| |
| &sdhc_2 { |
| vdd-supply = <&pm8998_l21>; |
| qcom,vdd-voltage-level = <2950000 2960000>; |
| qcom,vdd-current-level = <200 800000>; |
| |
| vdd-io-supply = <&pm8998_l13>; |
| qcom,vdd-io-voltage-level = <1808000 2960000>; |
| qcom,vdd-io-current-level = <200 22000>; |
| |
| pinctrl-names = "active", "sleep"; |
| pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; |
| pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; |
| |
| qcom,clk-rates = <400000 20000000 25000000 |
| 50000000 100000000 200000000>; |
| qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104"; |
| |
| status = "ok"; |
| }; |
| |
| &soc { |
| qcom,icnss@18800000 { |
| compatible = "qcom,icnss"; |
| reg = <0x18800000 0x800000>; |
| reg-names = "membase"; |
| interrupts = <0 414 0 /* CE0 */ >, |
| <0 415 0 /* CE1 */ >, |
| <0 416 0 /* CE2 */ >, |
| <0 417 0 /* CE3 */ >, |
| <0 418 0 /* CE4 */ >, |
| <0 419 0 /* CE5 */ >, |
| <0 420 0 /* CE6 */ >, |
| <0 421 0 /* CE7 */ >, |
| <0 422 0 /* CE8 */ >, |
| <0 423 0 /* CE9 */ >, |
| <0 424 0 /* CE10 */ >, |
| <0 425 0 /* CE11 */ >; |
| qcom,wlan-msa-memory = <0x100000>; |
| }; |
| }; |
| |
| &spmi_bus { |
| qcom,pm8998@0 { |
| compatible ="qcom,spmi-pmic"; |
| reg = <0x0 SPMI_USID>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| }; |
| |
| qcom,pm8998@1 { |
| compatible ="qcom,spmi-pmic"; |
| reg = <0x1 SPMI_USID>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| }; |
| |
| qcom,pmi8998@2 { |
| compatible = "qcom,spmi-pmic"; |
| reg = <0x2 SPMI_USID>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| }; |
| |
| qcom,pmi8998@3 { |
| compatible ="qcom,spmi-pmic"; |
| reg = <0x3 SPMI_USID>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| }; |
| |
| qcom,pm8005@4 { |
| compatible = "qcom,spmi-pmic"; |
| reg = <0x4 SPMI_USID>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| }; |
| |
| qcom,pm8005@5 { |
| compatible ="qcom,spmi-pmic"; |
| reg = <0x5 SPMI_USID>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| }; |
| }; |
| |
| &apc0_cpr { |
| qcom,cpr-ignore-invalid-fuses; |
| }; |
| |
| &apc1_cpr { |
| qcom,cpr-ignore-invalid-fuses; |
| }; |
| |
| &ufsphy_card { |
| compatible = "qcom,ufs-phy-qrbtc-sdm845"; |
| |
| vdda-phy-supply = <&pm8998_l1>; /* 0.88v */ |
| vdda-pll-supply = <&pm8998_l26>; /* 1.2v */ |
| vdda-phy-max-microamp = <62900>; |
| vdda-pll-max-microamp = <18300>; |
| |
| status = "ok"; |
| }; |
| |
| &ufshc_card { |
| limit-tx-hs-gear = <1>; |
| limit-rx-hs-gear = <1>; |
| |
| vdd-hba-supply = <&ufs_card_gdsc>; |
| vdd-hba-fixed-regulator; |
| vcc-supply = <&pm8998_l21>; |
| vccq2-supply = <&pm8998_s4>; |
| vcc-max-microamp = <300000>; |
| vccq2-max-microamp = <300000>; |
| |
| qcom,vddp-ref-clk-supply = <&pm8998_l2>; |
| qcom,vddp-ref-clk-max-microamp = <100>; |
| |
| qcom,disable-lpm; |
| rpm-level = <0>; |
| spm-level = <0>; |
| status = "ok"; |
| }; |
| |
| &pmi8998_charger { |
| qcom,suspend-input; |
| }; |
| |
| &usb0 { |
| /delete-property/ qcom,usb-dbm; |
| extcon = <0>, <0>, <&eud>; |
| qcom,charging-disabled; |
| dwc3@a600000 { |
| maximum-speed = "high-speed"; |
| }; |
| }; |
| |
| &qusb_phy0 { |
| reg = <0x088e2000 0x4>, |
| <0x0a720000 0x9500>; |
| reg-names = "qusb_phy_base", |
| "emu_phy_base"; |
| qcom,emulation; |
| qcom,emu-init-seq = <0x19 0x1404 |
| 0x20 0x1414 |
| 0x79 0x1410 |
| 0x00 0x1418 |
| 0x99 0x1404 |
| 0x04 0x1408 |
| 0xd9 0x1404>; |
| |
| qcom,emu-dcm-reset-seq = <0x5 0x14 /* 0x1 0x14 for E1.2 */ |
| 0x100000 0x20 |
| 0x0 0x20 |
| 0x1a0 0x20 /* 0x220 0x20 for E1.2 */ |
| 0x80 0x28>; |
| }; |