sh: More flexible + SH7780 earlyprintk SCIF support.
This makes the early printk support somewhat more flexible,
moving the port definition to a config option, and making the
port initialization configurable for sh-ipl+g users.
At the same time, this allows us to trivially wire up the
SH7780 SCIF0, so that's thrown in too more or less for free.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 48479e0..dcceec9 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -17,7 +17,18 @@
config EARLY_SCIF_CONSOLE
bool "Use early SCIF console"
- depends on CPU_SH4 || CPU_SH2A && !SH_STANDARD_BIOS
+ help
+ This enables an early console using a fixed SCIF port. This can
+ be used by platforms that are either not running the SH
+ standard BIOS, or do not wish to use the BIOS callbacks for the
+ serial I/O.
+
+config EARLY_SCIF_CONSOLE_PORT
+ hex "SCIF port for early console"
+ depends on EARLY_SCIF_CONSOLE
+ default "0xffe00000" if CPU_SUBTYPE_SH7780
+ default "0xfffe9800" if CPU_SUBTYPE_SH72060
+ default "0xffe80000" if CPU_SH4
config EARLY_PRINTK
bool "Early printk support"
@@ -30,6 +41,11 @@
when the kernel may crash or hang before the serial console is
initialised. If unsure, say N.
+ On devices that are running SH-IPL and want to keep the port
+ initialization consistent while not using the BIOS callbacks,
+ select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using
+ the kernel command line option to toggle back and forth.
+
config DEBUG_STACKOVERFLOW
bool "Check for stack overflows"
depends on DEBUG_KERNEL
diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c
index a000227..6034082 100644
--- a/arch/sh/kernel/early_printk.c
+++ b/arch/sh/kernel/early_printk.c
@@ -12,7 +12,7 @@
#include <linux/console.h>
#include <linux/tty.h>
#include <linux/init.h>
-#include <asm/io.h>
+#include <linux/io.h>
#ifdef CONFIG_SH_STANDARD_BIOS
#include <asm/sh_bios.h>
@@ -62,17 +62,9 @@
#include <linux/serial_core.h>
#include "../../../drivers/serial/sh-sci.h"
-#ifdef CONFIG_CPU_SH4
-#define SCIF_REG 0xffe80000
-#elif defined(CONFIG_CPU_SUBTYPE_SH72060)
-#define SCIF_REG 0xfffe9800
-#else
-#error "Undefined SCIF for this subtype"
-#endif
-
static struct uart_port scif_port = {
- .mapbase = SCIF_REG,
- .membase = (char __iomem *)SCIF_REG,
+ .mapbase = CONFIG_EARLY_SCIF_CONSOLE_PORT,
+ .membase = (char __iomem *)CONFIG_EARLY_SCIF_CONSOLE_PORT,
};
static void scif_sercon_putc(int c)
@@ -113,23 +105,29 @@
.index = -1,
};
+#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_STANDARD_BIOS)
+/*
+ * Simple SCIF init, primarily aimed at SH7750 and other similar SH-4
+ * devices that aren't using sh-ipl+g.
+ */
static void scif_sercon_init(int baud)
{
- ctrl_outw(0, SCIF_REG + 8);
- ctrl_outw(0, SCIF_REG);
+ ctrl_outw(0, scif_port.mapbase + 8);
+ ctrl_outw(0, scif_port.mapbase);
/* Set baud rate */
ctrl_outb((CONFIG_SH_PCLK_FREQ + 16 * baud) /
- (32 * baud) - 1, SCIF_REG + 4);
+ (32 * baud) - 1, scif_port.mapbase + 4);
- ctrl_outw(12, SCIF_REG + 24);
- ctrl_outw(8, SCIF_REG + 24);
- ctrl_outw(0, SCIF_REG + 32);
- ctrl_outw(0x60, SCIF_REG + 16);
- ctrl_outw(0, SCIF_REG + 36);
- ctrl_outw(0x30, SCIF_REG + 8);
+ ctrl_outw(12, scif_port.mapbase + 24);
+ ctrl_outw(8, scif_port.mapbase + 24);
+ ctrl_outw(0, scif_port.mapbase + 32);
+ ctrl_outw(0x60, scif_port.mapbase + 16);
+ ctrl_outw(0, scif_port.mapbase + 36);
+ ctrl_outw(0x30, scif_port.mapbase + 8);
}
-#endif
+#endif /* CONFIG_CPU_SH4 && !CONFIG_SH_STANDARD_BIOS */
+#endif /* CONFIG_EARLY_SCIF_CONSOLE */
/*
* Setup a default console, if more than one is compiled in, rely on the
@@ -168,7 +166,7 @@
if (!strncmp(buf, "serial", 6)) {
early_console = &scif_console;
-#ifdef CONFIG_CPU_SH4
+#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_STANDARD_BIOS)
scif_sercon_init(115200);
#endif
}