bnx2: Add EEH PCI recovery.
Add PCI recovery functions to the driver. The initial pci state is
also saved so the the MSI state can be restored during PCI recovery.
Signed-off-by: Wendy Xiong <wendyx@us.ibm.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 934c2bf..2589b99 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -7119,6 +7119,7 @@
}
pci_set_master(pdev);
+ pci_save_state(pdev);
bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
if (bp->pm_cap == 0) {
@@ -7628,6 +7629,92 @@
return 0;
}
+/**
+ * bnx2_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t bnx2_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct bnx2 *bp = netdev_priv(dev);
+
+ rtnl_lock();
+ netif_device_detach(dev);
+
+ if (netif_running(dev)) {
+ bnx2_netif_stop(bp);
+ del_timer_sync(&bp->timer);
+ bnx2_reset_nic(bp, BNX2_DRV_MSG_CODE_RESET);
+ }
+
+ pci_disable_device(pdev);
+ rtnl_unlock();
+
+ /* Request a slot slot reset. */
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * bnx2_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot.
+ */
+static pci_ers_result_t bnx2_io_slot_reset(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct bnx2 *bp = netdev_priv(dev);
+
+ rtnl_lock();
+ if (pci_enable_device(pdev)) {
+ dev_err(&pdev->dev,
+ "Cannot re-enable PCI device after reset.\n");
+ rtnl_unlock();
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+ pci_set_master(pdev);
+ pci_restore_state(pdev);
+
+ if (netif_running(dev)) {
+ bnx2_set_power_state(bp, PCI_D0);
+ bnx2_init_nic(bp, 1);
+ }
+
+ rtnl_unlock();
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * bnx2_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation.
+ */
+static void bnx2_io_resume(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct bnx2 *bp = netdev_priv(dev);
+
+ rtnl_lock();
+ if (netif_running(dev))
+ bnx2_netif_start(bp);
+
+ netif_device_attach(dev);
+ rtnl_unlock();
+}
+
+static struct pci_error_handlers bnx2_err_handler = {
+ .error_detected = bnx2_io_error_detected,
+ .slot_reset = bnx2_io_slot_reset,
+ .resume = bnx2_io_resume,
+};
+
static struct pci_driver bnx2_pci_driver = {
.name = DRV_MODULE_NAME,
.id_table = bnx2_pci_tbl,
@@ -7635,6 +7722,7 @@
.remove = __devexit_p(bnx2_remove_one),
.suspend = bnx2_suspend,
.resume = bnx2_resume,
+ .err_handler = &bnx2_err_handler,
};
static int __init bnx2_init(void)