gma500: Add VBLANK support for Poulsbo hardware
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
diff --git a/drivers/gpu/drm/gma500/psb_drv.h b/drivers/gpu/drm/gma500/psb_drv.h
index 958403c..f46b3c1 100644
--- a/drivers/gpu/drm/gma500/psb_drv.h
+++ b/drivers/gpu/drm/gma500/psb_drv.h
@@ -134,6 +134,9 @@
#define _PSB_IRQ_MSVDX_FLAG (1<<19)
#define _LNC_IRQ_TOPAZ_FLAG (1<<20)
+#define _PSB_PIPE_EVENT_FLAG (_PSB_VSYNC_PIPEA_FLAG | \
+ _PSB_VSYNC_PIPEB_FLAG)
+
/* This flag includes all the display IRQ bits excepts the vblank irqs. */
#define _MDFLD_DISP_ALL_IRQ_FLAG (_MDFLD_PIPEC_EVENT_FLAG | \
_MDFLD_PIPEB_EVENT_FLAG | \
diff --git a/drivers/gpu/drm/gma500/psb_irq.c b/drivers/gpu/drm/gma500/psb_irq.c
index 2d95458..7be802b 100644
--- a/drivers/gpu/drm/gma500/psb_irq.c
+++ b/drivers/gpu/drm/gma500/psb_irq.c
@@ -138,21 +138,10 @@
}
/**
- * Display controller interrupt handler for vsync/vblank.
- *
- */
-static void mid_vblank_handler(struct drm_device *dev, uint32_t pipe)
-{
- drm_handle_vblank(dev, pipe);
-}
-
-
-/**
* Display controller interrupt handler for pipe event.
*
*/
-#define WAIT_STATUS_CLEAR_LOOP_COUNT 0xffff
-static void mid_pipe_event_handler(struct drm_device *dev, uint32_t pipe)
+static void mid_pipe_event_handler(struct drm_device *dev, int pipe)
{
struct drm_psb_private *dev_priv =
(struct drm_psb_private *) dev->dev_private;
@@ -161,6 +150,7 @@
uint32_t pipe_stat_reg = psb_pipestat(pipe);
uint32_t pipe_enable = dev_priv->pipestat[pipe];
uint32_t pipe_status = dev_priv->pipestat[pipe] >> 16;
+ uint32_t pipe_clear;
uint32_t i = 0;
spin_lock(&dev_priv->irqmask_lock);
@@ -171,27 +161,23 @@
spin_unlock(&dev_priv->irqmask_lock);
- /* clear the 2nd level interrupt status bits */
- /**
- * FIXME: shouldn't use while loop here. However, the interrupt
- * status 'sticky' bits cannot be cleared by setting '1' to that
- * bit once...
- */
- for (i = 0; i < WAIT_STATUS_CLEAR_LOOP_COUNT; i++) {
+ /* Clear the 2nd level interrupt status bits
+ * Sometimes the bits are very sticky so we repeat until they unstick */
+ for (i = 0; i < 0xffff; i++) {
PSB_WVDC32(PSB_RVDC32(pipe_stat_reg), pipe_stat_reg);
- (void) PSB_RVDC32(pipe_stat_reg);
+ pipe_clear = PSB_RVDC32(pipe_stat_reg) & pipe_status;
- if ((PSB_RVDC32(pipe_stat_reg) & pipe_status) == 0)
+ if (pipe_clear == 0)
break;
}
- if (i == WAIT_STATUS_CLEAR_LOOP_COUNT)
+ if (pipe_clear)
dev_err(dev->dev,
- "%s, can't clear the status bits in pipe_stat_reg, its value = 0x%x.\n",
- __func__, PSB_RVDC32(pipe_stat_reg));
+ "%s, can't clear status bits for pipe %d, its value = 0x%x.\n",
+ __func__, pipe, PSB_RVDC32(pipe_stat_reg));
if (pipe_stat_val & PIPE_VBLANK_STATUS)
- mid_vblank_handler(dev, pipe);
+ drm_handle_vblank(dev, pipe);
if (pipe_stat_val & PIPE_TE_STATUS)
drm_handle_vblank(dev, pipe);
@@ -202,8 +188,11 @@
*/
static void psb_vdc_interrupt(struct drm_device *dev, uint32_t vdc_stat)
{
- if (vdc_stat & _PSB_PIPEA_EVENT_FLAG)
+ if (vdc_stat & _PSB_VSYNC_PIPEA_FLAG)
mid_pipe_event_handler(dev, 0);
+
+ if (vdc_stat & _PSB_VSYNC_PIPEB_FLAG)
+ mid_pipe_event_handler(dev, 1);
}
irqreturn_t psb_irq_handler(DRM_IRQ_ARGS)
@@ -219,8 +208,13 @@
vdc_stat = PSB_RVDC32(PSB_INT_IDENTITY_R);
+ if (vdc_stat & _PSB_PIPE_EVENT_FLAG)
+ dsp_int = 1;
+
+ /* FIXME: Handle Medfield
if (vdc_stat & _MDFLD_DISP_ALL_IRQ_FLAG)
dsp_int = 1;
+ */
if (vdc_stat & _PSB_IRQ_SGX_FLAG)
sgx_int = 1;
@@ -266,13 +260,18 @@
if (gma_power_is_on(dev))
PSB_WVDC32(0xFFFFFFFF, PSB_HWSTAM);
if (dev->vblank_enabled[0])
- dev_priv->vdc_irq_mask |= _PSB_PIPEA_EVENT_FLAG;
+ dev_priv->vdc_irq_mask |= _PSB_VSYNC_PIPEA_FLAG;
+ if (dev->vblank_enabled[1])
+ dev_priv->vdc_irq_mask |= _PSB_VSYNC_PIPEB_FLAG;
+
+ /* FIXME: Handle Medfield irq mask
if (dev->vblank_enabled[1])
dev_priv->vdc_irq_mask |= _MDFLD_PIPEB_EVENT_FLAG;
if (dev->vblank_enabled[2])
dev_priv->vdc_irq_mask |= _MDFLD_PIPEC_EVENT_FLAG;
+ */
- /*This register is safe even if display island is off*/
+ /* This register is safe even if display island is off */
PSB_WVDC32(~dev_priv->vdc_irq_mask, PSB_INT_MASK_R);
spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags);
}
@@ -464,7 +463,13 @@
spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags);
- mid_enable_pipe_event(dev_priv, pipe);
+ if (pipe == 0)
+ dev_priv->vdc_irq_mask |= _PSB_VSYNC_PIPEA_FLAG;
+ else if (pipe == 1)
+ dev_priv->vdc_irq_mask |= _PSB_VSYNC_PIPEB_FLAG;
+
+ PSB_WVDC32(~dev_priv->vdc_irq_mask, PSB_INT_MASK_R);
+ PSB_WVDC32(dev_priv->vdc_irq_mask, PSB_INT_ENABLE_R);
psb_enable_pipestat(dev_priv, pipe, PIPE_VBLANK_INTERRUPT_ENABLE);
spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags);
@@ -482,7 +487,13 @@
spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags);
- mid_disable_pipe_event(dev_priv, pipe);
+ if (pipe == 0)
+ dev_priv->vdc_irq_mask &= ~_PSB_VSYNC_PIPEA_FLAG;
+ else if (pipe == 1)
+ dev_priv->vdc_irq_mask &= ~_PSB_VSYNC_PIPEB_FLAG;
+
+ PSB_WVDC32(~dev_priv->vdc_irq_mask, PSB_INT_MASK_R);
+ PSB_WVDC32(dev_priv->vdc_irq_mask, PSB_INT_ENABLE_R);
psb_disable_pipestat(dev_priv, pipe, PIPE_VBLANK_INTERRUPT_ENABLE);
spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags);