MIPS: Whitespace cleanup.
Having received another series of whitespace patches I decided to do this
once and for all rather than dealing with this kind of patches trickling
in forever.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/sgi-ip22/ip22-eisa.c b/arch/mips/sgi-ip22/ip22-eisa.c
index 4a6057b..a0a7922 100644
--- a/arch/mips/sgi-ip22/ip22-eisa.c
+++ b/arch/mips/sgi-ip22/ip22-eisa.c
@@ -2,7 +2,7 @@
* Basic EISA bus support for the SGI Indigo-2.
*
* (C) 2002 Pascal Dameme <netinet@freesurf.fr>
- * and Marc Zyngier <mzyngier@freesurf.fr>
+ * and Marc Zyngier <mzyngier@freesurf.fr>
*
* This code is released under both the GPL version 2 and BSD
* licenses. Either license may be used.
@@ -40,13 +40,13 @@
/* I2 has four EISA slots. */
#define IP22_EISA_MAX_SLOTS 4
-#define EISA_MAX_IRQ 16
+#define EISA_MAX_IRQ 16
-#define EIU_MODE_REG 0x0001ffc0
-#define EIU_STAT_REG 0x0001ffc4
-#define EIU_PREMPT_REG 0x0001ffc8
-#define EIU_QUIET_REG 0x0001ffcc
-#define EIU_INTRPT_ACK 0x00010004
+#define EIU_MODE_REG 0x0001ffc0
+#define EIU_STAT_REG 0x0001ffc4
+#define EIU_PREMPT_REG 0x0001ffc8
+#define EIU_QUIET_REG 0x0001ffcc
+#define EIU_INTRPT_ACK 0x00010004
static char __init *decode_eisa_sig(unsigned long addr)
{
diff --git a/arch/mips/sgi-ip22/ip22-gio.c b/arch/mips/sgi-ip22/ip22-gio.c
index f5ebc09..ab0e379 100644
--- a/arch/mips/sgi-ip22/ip22-gio.c
+++ b/arch/mips/sgi-ip22/ip22-gio.c
@@ -15,7 +15,7 @@
static struct {
const char *name;
- __u8 id;
+ __u8 id;
} gio_name_table[] = {
{ .name = "SGI Impact", .id = 0x10 },
{ .name = "Phobos G160", .id = 0x35 },
@@ -376,15 +376,15 @@
}
static struct bus_type gio_bus_type = {
- .name = "gio",
+ .name = "gio",
.dev_attrs = gio_dev_attrs,
- .match = gio_bus_match,
- .probe = gio_device_probe,
- .remove = gio_device_remove,
+ .match = gio_bus_match,
+ .probe = gio_device_probe,
+ .remove = gio_device_remove,
.suspend = gio_device_suspend,
- .resume = gio_device_resume,
+ .resume = gio_device_resume,
.shutdown = gio_device_shutdown,
- .uevent = gio_device_uevent,
+ .uevent = gio_device_uevent,
};
static struct resource gio_bus_resource = {
diff --git a/arch/mips/sgi-ip22/ip22-int.c b/arch/mips/sgi-ip22/ip22-int.c
index 3f2b763..3db64d5 100644
--- a/arch/mips/sgi-ip22/ip22-int.c
+++ b/arch/mips/sgi-ip22/ip22-int.c
@@ -1,12 +1,12 @@
/*
* ip22-int.c: Routines for generic manipulation of the INT[23] ASIC
- * found on INDY and Indigo2 workstations.
+ * found on INDY and Indigo2 workstations.
*
* Copyright (C) 1996 David S. Miller (davem@davemloft.net)
* Copyright (C) 1997, 1998 Ralf Baechle (ralf@gnu.org)
* Copyright (C) 1999 Andrew R. Baker (andrewb@uab.edu)
- * - Indigo2 changes
- * - Interrupt handling fixes
+ * - Indigo2 changes
+ * - Interrupt handling fixes
* Copyright (C) 2001, 2003 Ladislav Michl (ladis@linux-mips.org)
*/
#include <linux/types.h>
@@ -195,24 +195,24 @@
* at all) like:
*
* MIPS IRQ Source
- * -------- ------
- * 0 Software (ignored)
- * 1 Software (ignored)
- * 2 Local IRQ level zero
- * 3 Local IRQ level one
- * 4 8254 Timer zero
- * 5 8254 Timer one
- * 6 Bus Error
- * 7 R4k timer (what we use)
+ * -------- ------
+ * 0 Software (ignored)
+ * 1 Software (ignored)
+ * 2 Local IRQ level zero
+ * 3 Local IRQ level one
+ * 4 8254 Timer zero
+ * 5 8254 Timer one
+ * 6 Bus Error
+ * 7 R4k timer (what we use)
*
* We handle the IRQ according to _our_ priority which is:
*
- * Highest ---- R4k Timer
- * Local IRQ zero
- * Local IRQ one
- * Bus Error
- * 8254 Timer zero
- * Lowest ---- 8254 Timer one
+ * Highest ---- R4k Timer
+ * Local IRQ zero
+ * Local IRQ one
+ * Bus Error
+ * 8254 Timer zero
+ * Lowest ---- 8254 Timer one
*
* then we just return, if multiple IRQs are pending then we will just take
* another exception, big deal.
diff --git a/arch/mips/sgi-ip22/ip22-mc.c b/arch/mips/sgi-ip22/ip22-mc.c
index 75ada8a..7cec0a4 100644
--- a/arch/mips/sgi-ip22/ip22-mc.c
+++ b/arch/mips/sgi-ip22/ip22-mc.c
@@ -121,22 +121,22 @@
*/
/* Step 0: Make sure we turn off the watchdog in case it's
- * still running (which might be the case after a
- * soft reboot).
+ * still running (which might be the case after a
+ * soft reboot).
*/
tmp = sgimc->cpuctrl0;
tmp &= ~SGIMC_CCTRL0_WDOG;
sgimc->cpuctrl0 = tmp;
/* Step 1: The CPU/GIO error status registers will not latch
- * up a new error status until the register has been
- * cleared by the cpu. These status registers are
- * cleared by writing any value to them.
+ * up a new error status until the register has been
+ * cleared by the cpu. These status registers are
+ * cleared by writing any value to them.
*/
sgimc->cstat = sgimc->gstat = 0;
/* Step 2: Enable all parity checking in cpu control register
- * zero.
+ * zero.
*/
/* don't touch parity settings for IP28 */
tmp = sgimc->cpuctrl0;
@@ -147,7 +147,7 @@
sgimc->cpuctrl0 = tmp;
/* Step 3: Setup the MC write buffer depth, this is controlled
- * in cpu control register 1 in the lower 4 bits.
+ * in cpu control register 1 in the lower 4 bits.
*/
tmp = sgimc->cpuctrl1;
tmp &= ~0xf;
@@ -155,26 +155,26 @@
sgimc->cpuctrl1 = tmp;
/* Step 4: Initialize the RPSS divider register to run as fast
- * as it can correctly operate. The register is laid
- * out as follows:
+ * as it can correctly operate. The register is laid
+ * out as follows:
*
- * ----------------------------------------
- * | RESERVED | INCREMENT | DIVIDER |
- * ----------------------------------------
- * 31 16 15 8 7 0
+ * ----------------------------------------
+ * | RESERVED | INCREMENT | DIVIDER |
+ * ----------------------------------------
+ * 31 16 15 8 7 0
*
- * DIVIDER determines how often a 'tick' happens,
- * INCREMENT determines by how the RPSS increment
- * registers value increases at each 'tick'. Thus,
- * for IP22 we get INCREMENT=1, DIVIDER=1 == 0x101
+ * DIVIDER determines how often a 'tick' happens,
+ * INCREMENT determines by how the RPSS increment
+ * registers value increases at each 'tick'. Thus,
+ * for IP22 we get INCREMENT=1, DIVIDER=1 == 0x101
*/
sgimc->divider = 0x101;
/* Step 5: Initialize GIO64 arbitrator configuration register.
*
* NOTE: HPC init code in sgihpc_init() must run before us because
- * we need to know Guiness vs. FullHouse and the board
- * revision on this machine. You have been warned.
+ * we need to know Guiness vs. FullHouse and the board
+ * revision on this machine. You have been warned.
*/
/* First the basic invariants across all GIO64 implementations. */
@@ -187,18 +187,18 @@
if (SGIOC_SYSID_BOARDREV(sgioc->sysid) < 2) {
tmp |= SGIMC_GIOPAR_HPC264; /* 2nd HPC at 64bits */
tmp |= SGIMC_GIOPAR_PLINEEXP0; /* exp0 pipelines */
- tmp |= SGIMC_GIOPAR_MASTEREXP1; /* exp1 masters */
+ tmp |= SGIMC_GIOPAR_MASTEREXP1; /* exp1 masters */
tmp |= SGIMC_GIOPAR_RTIMEEXP0; /* exp0 is realtime */
} else {
tmp |= SGIMC_GIOPAR_HPC264; /* 2nd HPC 64bits */
tmp |= SGIMC_GIOPAR_PLINEEXP0; /* exp[01] pipelined */
tmp |= SGIMC_GIOPAR_PLINEEXP1;
- tmp |= SGIMC_GIOPAR_MASTEREISA; /* EISA masters */
+ tmp |= SGIMC_GIOPAR_MASTEREISA; /* EISA masters */
}
} else {
/* Guiness specific settings. */
tmp |= SGIMC_GIOPAR_EISA64; /* MC talks to EISA at 64bits */
- tmp |= SGIMC_GIOPAR_MASTEREISA; /* EISA bus can act as master */
+ tmp |= SGIMC_GIOPAR_MASTEREISA; /* EISA bus can act as master */
}
sgimc->giopar = tmp; /* poof */
diff --git a/arch/mips/sgi-ip22/ip22-nvram.c b/arch/mips/sgi-ip22/ip22-nvram.c
index 0177566..e077036 100644
--- a/arch/mips/sgi-ip22/ip22-nvram.c
+++ b/arch/mips/sgi-ip22/ip22-nvram.c
@@ -14,11 +14,11 @@
#define EEPROM_WRITE 0xa000 /* serial memory write */
#define EEPROM_WRALL 0x8800 /* write all registers */
#define EEPROM_WDS 0x8000 /* disable all programming */
-#define EEPROM_PRREAD 0xc000 /* read protect register */
-#define EEPROM_PREN 0x9800 /* enable protect register mode */
-#define EEPROM_PRCLEAR 0xffff /* clear protect register */
-#define EEPROM_PRWRITE 0xa000 /* write protect register */
-#define EEPROM_PRDS 0x8000 /* disable protect register, forever */
+#define EEPROM_PRREAD 0xc000 /* read protect register */
+#define EEPROM_PREN 0x9800 /* enable protect register mode */
+#define EEPROM_PRCLEAR 0xffff /* clear protect register */
+#define EEPROM_PRWRITE 0xa000 /* write protect register */
+#define EEPROM_PRDS 0x8000 /* disable protect register, forever */
#define EEPROM_EPROT 0x01 /* Protect register enable */
#define EEPROM_CSEL 0x02 /* Chip select */
@@ -27,7 +27,7 @@
#define EEPROM_DATI 0x10 /* Data in */
/* We need to use these functions early... */
-#define delay() ({ \
+#define delay() ({ \
int x; \
for (x=0; x<100000; x++) __asm__ __volatile__(""); })
@@ -35,7 +35,7 @@
__raw_writel(__raw_readl(ptr) & ~EEPROM_DATO, ptr); \
__raw_writel(__raw_readl(ptr) & ~EEPROM_ECLK, ptr); \
__raw_writel(__raw_readl(ptr) & ~EEPROM_EPROT, ptr); \
- delay(); \
+ delay(); \
__raw_writel(__raw_readl(ptr) | EEPROM_CSEL, ptr); \
__raw_writel(__raw_readl(ptr) | EEPROM_ECLK, ptr); })
@@ -46,7 +46,7 @@
__raw_writel(__raw_readl(ptr) | EEPROM_EPROT, ptr); \
__raw_writel(__raw_readl(ptr) | EEPROM_ECLK, ptr); })
-#define BITS_IN_COMMAND 11
+#define BITS_IN_COMMAND 11
/*
* clock in the nvram command and the register number. For the
* national semiconductor nv ram chip the op code is 3 bits and
diff --git a/arch/mips/sgi-ip22/ip22-platform.c b/arch/mips/sgi-ip22/ip22-platform.c
index 698904d..a14fd32 100644
--- a/arch/mips/sgi-ip22/ip22-platform.c
+++ b/arch/mips/sgi-ip22/ip22-platform.c
@@ -137,7 +137,7 @@
eth0_pd.hpc = hpc3c0;
eth0_pd.irq = SGI_ENET_IRQ;
-#define EADDR_NVOFS 250
+#define EADDR_NVOFS 250
for (i = 0; i < 3; i++) {
unsigned short tmp = ip22_nvram_read(EADDR_NVOFS / 2 + i);
@@ -155,17 +155,17 @@
return 0;
sgimc->giopar |= SGIMC_GIOPAR_MASTEREXP1 | SGIMC_GIOPAR_EXP164 |
- SGIMC_GIOPAR_HPC264;
+ SGIMC_GIOPAR_HPC264;
hpc3c1->pbus_piocfg[0][0] = 0x3ffff;
/* interrupt/config register on Challenge S Mezz board */
hpc3c1->pbus_extregs[0][0] = 0x30;
eth1_pd.hpc = hpc3c1;
eth1_pd.irq = SGI_GIO_0_IRQ;
-#define EADDR_NVOFS 250
+#define EADDR_NVOFS 250
for (i = 0; i < 3; i++) {
unsigned short tmp = ip22_eeprom_read(&hpc3c1->eeprom,
- EADDR_NVOFS / 2 + i);
+ EADDR_NVOFS / 2 + i);
eth1_pd.mac[2 * i] = tmp >> 8;
eth1_pd.mac[2 * i + 1] = tmp & 0xff;
diff --git a/arch/mips/sgi-ip22/ip22-reset.c b/arch/mips/sgi-ip22/ip22-reset.c
index 20363d2..063c2dd 100644
--- a/arch/mips/sgi-ip22/ip22-reset.c
+++ b/arch/mips/sgi-ip22/ip22-reset.c
@@ -101,7 +101,7 @@
del_timer(&debounce_timer);
if (sgint->istat1 & SGINT_ISTAT1_PWR) {
/* Interrupt still being sent. */
- debounce_timer.expires = jiffies + (HZ / 20); /* 0.05s */
+ debounce_timer.expires = jiffies + (HZ / 20); /* 0.05s */
add_timer(&debounce_timer);
sgioc->panel = SGIOC_PANEL_POWERON | SGIOC_PANEL_POWERINTR |
@@ -166,7 +166,7 @@
}
static int panic_event(struct notifier_block *this, unsigned long event,
- void *ptr)
+ void *ptr)
{
if (machine_state & MACHINE_PANICED)
return NOTIFY_DONE;
diff --git a/arch/mips/sgi-ip22/ip28-berr.c b/arch/mips/sgi-ip22/ip28-berr.c
index 0626555..3f47346 100644
--- a/arch/mips/sgi-ip22/ip28-berr.c
+++ b/arch/mips/sgi-ip22/ip28-berr.c
@@ -136,14 +136,14 @@
hpc3.scsi[1].cbp = hpc3c0->scsi_chan1.cbptr;
hpc3.scsi[1].ndptr = hpc3c0->scsi_chan1.ndptr;
- hpc3.ethrx.addr = (unsigned long)&hpc3c0->ethregs.rx_cbptr;
- hpc3.ethrx.ctrl = hpc3c0->ethregs.rx_ctrl; /* HPC3_ERXCTRL_ACTIVE ? */
- hpc3.ethrx.cbp = hpc3c0->ethregs.rx_cbptr;
+ hpc3.ethrx.addr = (unsigned long)&hpc3c0->ethregs.rx_cbptr;
+ hpc3.ethrx.ctrl = hpc3c0->ethregs.rx_ctrl; /* HPC3_ERXCTRL_ACTIVE ? */
+ hpc3.ethrx.cbp = hpc3c0->ethregs.rx_cbptr;
hpc3.ethrx.ndptr = hpc3c0->ethregs.rx_ndptr;
- hpc3.ethtx.addr = (unsigned long)&hpc3c0->ethregs.tx_cbptr;
- hpc3.ethtx.ctrl = hpc3c0->ethregs.tx_ctrl; /* HPC3_ETXCTRL_ACTIVE ? */
- hpc3.ethtx.cbp = hpc3c0->ethregs.tx_cbptr;
+ hpc3.ethtx.addr = (unsigned long)&hpc3c0->ethregs.tx_cbptr;
+ hpc3.ethtx.ctrl = hpc3c0->ethregs.tx_ctrl; /* HPC3_ETXCTRL_ACTIVE ? */
+ hpc3.ethtx.cbp = hpc3c0->ethregs.tx_cbptr;
hpc3.ethtx.ndptr = hpc3c0->ethregs.tx_ndptr;
for (i = 0; i < 8; ++i) {
@@ -196,11 +196,11 @@
scb | (1 << 12)*i);
}
i = read_c0_config();
- scb = i & (1 << 13) ? 7:6; /* scblksize = 2^[7..6] */
+ scb = i & (1 << 13) ? 7:6; /* scblksize = 2^[7..6] */
scw = ((i >> 16) & 7) + 19 - 1; /* scwaysize = 2^[24..19] / 2 */
i = ((1 << scw) - 1) & ~((1 << scb) - 1);
- printk(KERN_ERR "S: 0: %08x %08x, 1: %08x %08x (PA[%u:%u] %05x)\n",
+ printk(KERN_ERR "S: 0: %08x %08x, 1: %08x %08x (PA[%u:%u] %05x)\n",
cache_tags.tags[0][0].hi, cache_tags.tags[0][0].lo,
cache_tags.tags[0][1].hi, cache_tags.tags[0][1].lo,
scw-1, scb, i & (unsigned)cache_tags.err_addr);