| /* |
| * pata_netcell.c - Netcell PATA driver |
| * |
| * (c) 2006 Red Hat |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/blkdev.h> |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <scsi/scsi_host.h> |
| #include <linux/libata.h> |
| #include <linux/ata.h> |
| |
| #define DRV_NAME "pata_netcell" |
| #define DRV_VERSION "0.1.7" |
| |
| /* No PIO or DMA methods needed for this device */ |
| |
| static unsigned int netcell_read_id(struct ata_device *adev, |
| struct ata_taskfile *tf, u16 *id) |
| { |
| unsigned int err_mask = ata_do_dev_read_id(adev, tf, id); |
| /* Firmware forgets to mark words 85-87 valid */ |
| if (err_mask == 0) |
| id[ATA_ID_CSF_DEFAULT] |= 0x4000; |
| return err_mask; |
| } |
| |
| static struct scsi_host_template netcell_sht = { |
| ATA_BMDMA_SHT(DRV_NAME), |
| }; |
| |
| static struct ata_port_operations netcell_ops = { |
| .inherits = &ata_bmdma_port_ops, |
| .cable_detect = ata_cable_80wire, |
| .read_id = netcell_read_id, |
| }; |
| |
| |
| /** |
| * netcell_init_one - Register Netcell ATA PCI device with kernel services |
| * @pdev: PCI device to register |
| * @ent: Entry in netcell_pci_tbl matching with @pdev |
| * |
| * Called from kernel PCI layer. |
| * |
| * LOCKING: |
| * Inherited from PCI layer (may sleep). |
| * |
| * RETURNS: |
| * Zero on success, or -ERRNO value. |
| */ |
| |
| static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| static const struct ata_port_info info = { |
| .flags = ATA_FLAG_SLAVE_POSS, |
| /* Actually we don't really care about these as the |
| firmware deals with it */ |
| .pio_mask = ATA_PIO4, |
| .mwdma_mask = ATA_MWDMA2, |
| .udma_mask = ATA_UDMA5, /* UDMA 133 */ |
| .port_ops = &netcell_ops, |
| }; |
| const struct ata_port_info *port_info[] = { &info, NULL }; |
| int rc; |
| |
| ata_print_version_once(&pdev->dev, DRV_VERSION); |
| |
| rc = pcim_enable_device(pdev); |
| if (rc) |
| return rc; |
| |
| /* Any chip specific setup/optimisation/messages here */ |
| ata_pci_bmdma_clear_simplex(pdev); |
| |
| /* And let the library code do the work */ |
| return ata_pci_bmdma_init_one(pdev, port_info, &netcell_sht, NULL, 0); |
| } |
| |
| static const struct pci_device_id netcell_pci_tbl[] = { |
| { PCI_VDEVICE(NETCELL, PCI_DEVICE_ID_REVOLUTION), }, |
| |
| { } /* terminate list */ |
| }; |
| |
| static struct pci_driver netcell_pci_driver = { |
| .name = DRV_NAME, |
| .id_table = netcell_pci_tbl, |
| .probe = netcell_init_one, |
| .remove = ata_pci_remove_one, |
| #ifdef CONFIG_PM |
| .suspend = ata_pci_device_suspend, |
| .resume = ata_pci_device_resume, |
| #endif |
| }; |
| |
| module_pci_driver(netcell_pci_driver); |
| |
| MODULE_AUTHOR("Alan Cox"); |
| MODULE_DESCRIPTION("SCSI low-level driver for Netcell PATA RAID"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DEVICE_TABLE(pci, netcell_pci_tbl); |
| MODULE_VERSION(DRV_VERSION); |