[SCSI] sd: Make revalidate less chatty
sd_revalidate ends up being called several times during device setup.
With this patch we print everything during the first scan. Subsequent
invocations will only print a message if the parameter in question has
actually changed (LUN capacity has increased, etc.).
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 8eebaa8..aeab5d9 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1440,6 +1440,7 @@
{
int sector_size;
struct scsi_device *sdp = sdkp->device;
+ sector_t old_capacity = sdkp->capacity;
if (sd_try_rc16_first(sdp)) {
sector_size = read_capacity_16(sdkp, sdp, buffer);
@@ -1531,10 +1532,11 @@
string_get_size(sz, STRING_UNITS_10, cap_str_10,
sizeof(cap_str_10));
- sd_printk(KERN_NOTICE, sdkp,
- "%llu %d-byte hardware sectors: (%s/%s)\n",
- (unsigned long long)sdkp->capacity,
- sector_size, cap_str_10, cap_str_2);
+ if (sdkp->first_scan || old_capacity != sdkp->capacity)
+ sd_printk(KERN_NOTICE, sdkp,
+ "%llu %d-byte hardware sectors: (%s/%s)\n",
+ (unsigned long long)sdkp->capacity,
+ sector_size, cap_str_10, cap_str_2);
}
/* Rescale capacity to 512-byte units */
@@ -1571,6 +1573,7 @@
int res;
struct scsi_device *sdp = sdkp->device;
struct scsi_mode_data data;
+ int old_wp = sdkp->write_prot;
set_disk_ro(sdkp->disk, 0);
if (sdp->skip_ms_page_3f) {
@@ -1611,11 +1614,13 @@
} else {
sdkp->write_prot = ((data.device_specific & 0x80) != 0);
set_disk_ro(sdkp->disk, sdkp->write_prot);
- sd_printk(KERN_NOTICE, sdkp, "Write Protect is %s\n",
- sdkp->write_prot ? "on" : "off");
- sd_printk(KERN_DEBUG, sdkp,
- "Mode Sense: %02x %02x %02x %02x\n",
- buffer[0], buffer[1], buffer[2], buffer[3]);
+ if (sdkp->first_scan || old_wp != sdkp->write_prot) {
+ sd_printk(KERN_NOTICE, sdkp, "Write Protect is %s\n",
+ sdkp->write_prot ? "on" : "off");
+ sd_printk(KERN_DEBUG, sdkp,
+ "Mode Sense: %02x %02x %02x %02x\n",
+ buffer[0], buffer[1], buffer[2], buffer[3]);
+ }
}
}
@@ -1633,6 +1638,9 @@
int modepage;
struct scsi_mode_data data;
struct scsi_sense_hdr sshdr;
+ int old_wce = sdkp->WCE;
+ int old_rcd = sdkp->RCD;
+ int old_dpofua = sdkp->DPOFUA;
if (sdp->skip_ms_page_8)
goto defaults;
@@ -1704,12 +1712,14 @@
sdkp->DPOFUA = 0;
}
- sd_printk(KERN_NOTICE, sdkp,
- "Write cache: %s, read cache: %s, %s\n",
- sdkp->WCE ? "enabled" : "disabled",
- sdkp->RCD ? "disabled" : "enabled",
- sdkp->DPOFUA ? "supports DPO and FUA"
- : "doesn't support DPO or FUA");
+ if (sdkp->first_scan || old_wce != sdkp->WCE ||
+ old_rcd != sdkp->RCD || old_dpofua != sdkp->DPOFUA)
+ sd_printk(KERN_NOTICE, sdkp,
+ "Write cache: %s, read cache: %s, %s\n",
+ sdkp->WCE ? "enabled" : "disabled",
+ sdkp->RCD ? "disabled" : "enabled",
+ sdkp->DPOFUA ? "supports DPO and FUA"
+ : "doesn't support DPO or FUA");
return;
}
@@ -1805,15 +1815,6 @@
goto out;
}
- /* defaults, until the device tells us otherwise */
- sdp->sector_size = 512;
- sdkp->capacity = 0;
- sdkp->media_present = 1;
- sdkp->write_prot = 0;
- sdkp->WCE = 0;
- sdkp->RCD = 0;
- sdkp->ATO = 0;
-
sd_spinup_disk(sdkp);
/*
@@ -1827,6 +1828,8 @@
sd_read_app_tag_own(sdkp, buffer);
}
+ sdkp->first_scan = 0;
+
/*
* We now have all cache related info, determine how we deal
* with ordered requests. Note that as the current SCSI
@@ -1937,6 +1940,16 @@
gd->private_data = &sdkp->driver;
gd->queue = sdkp->device->request_queue;
+ /* defaults, until the device tells us otherwise */
+ sdp->sector_size = 512;
+ sdkp->capacity = 0;
+ sdkp->media_present = 1;
+ sdkp->write_prot = 0;
+ sdkp->WCE = 0;
+ sdkp->RCD = 0;
+ sdkp->ATO = 0;
+ sdkp->first_scan = 1;
+
sd_revalidate_disk(gd);
blk_queue_prep_rq(sdp->request_queue, sd_prep_fn);