Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Update a BKL related comment
  powerpc/mm: Fix module instruction tlb fault handling on Book-E 64
  powerpc: Fix call to subpage_protection()
  powerpc: Set CONFIG_32BIT on ppc32
  powerpc/mm: Fix build error in setup_initial_memory_limit
  powerpc/pseries: Don't override CONFIG_PPC_PSERIES_DEBUG
  powerpc: Fix div64 in bootloader
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index b644719..e625e9e 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -4,6 +4,10 @@
 	bool
 	default y if !PPC64
 
+config 32BIT
+	bool
+	default y if PPC32
+
 config 64BIT
 	bool
 	default y if PPC64
diff --git a/arch/powerpc/boot/div64.S b/arch/powerpc/boot/div64.S
index 722f360..d271ab5 100644
--- a/arch/powerpc/boot/div64.S
+++ b/arch/powerpc/boot/div64.S
@@ -33,9 +33,10 @@
 	cntlzw	r0,r5		# we are shifting the dividend right
 	li	r10,-1		# to make it < 2^32, and shifting
 	srw	r10,r10,r0	# the divisor right the same amount,
-	add	r9,r4,r10	# rounding up (so the estimate cannot
+	addc	r9,r4,r10	# rounding up (so the estimate cannot
 	andc	r11,r6,r10	# ever be too large, only too small)
 	andc	r9,r9,r10
+	addze	r9,r9
 	or	r11,r5,r11
 	rotlw	r9,r9,r0
 	rotlw	r11,r11,r0
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 2a178b0..ce6f61c 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -497,9 +497,8 @@
 }
 
 /*
- * Called into from start_kernel, after lock_kernel has been called.
- * Initializes bootmem, which is unsed to manage page allocation until
- * mem_init is called.
+ * Called into from start_kernel this initializes bootmem, which is used
+ * to manage page allocation until mem_init is called.
  */
 void __init setup_arch(char **cmdline_p)
 {
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 83f534d..5e95844 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -1123,7 +1123,7 @@
 	else
 #endif /* CONFIG_PPC_HAS_HASH_64K */
 		rc = __hash_page_4K(ea, access, vsid, ptep, trap, local, ssize,
-				    subpage_protection(pgdir, ea));
+				    subpage_protection(mm, ea));
 
 	/* Dump some info in case of hash insertion failure, they should
 	 * never happen so it is really useful to know if/when they do
diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
index 8b04c54..8526bd9 100644
--- a/arch/powerpc/mm/tlb_low_64e.S
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -138,8 +138,11 @@
 	cmpldi	cr0,r15,0			/* Check for user region */
 	std	r14,EX_TLB_ESR(r12)		/* write crazy -1 to frame */
 	beq	normal_tlb_miss
+
+	li	r11,_PAGE_PRESENT|_PAGE_BAP_SX	/* Base perm */
+	oris	r11,r11,_PAGE_ACCESSED@h
 	/* XXX replace the RMW cycles with immediate loads + writes */
-1:	mfspr	r10,SPRN_MAS1
+	mfspr	r10,SPRN_MAS1
 	cmpldi	cr0,r15,8			/* Check for vmalloc region */
 	rlwinm	r10,r10,0,16,1			/* Clear TID */
 	mtspr	SPRN_MAS1,r10
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index 36c0c44..2a030d8 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -585,6 +585,6 @@
 	ppc64_rma_size = min_t(u64, first_memblock_size, 0x40000000);
 
 	/* Finally limit subsequent allocations */
-	memblock_set_current_limit(ppc64_memblock_base + ppc64_rma_size);
+	memblock_set_current_limit(first_memblock_base + ppc64_rma_size);
 }
 #endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index c667f0f..3139814 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -47,6 +47,12 @@
 config PPC_PSERIES_DEBUG
 	depends on PPC_PSERIES && PPC_EARLY_DEBUG
 	bool "Enable extra debug logging in platforms/pseries"
+        help
+	  Say Y here if you want the pseries core to produce a bunch of
+	  debug messages to the system log. Select this if you are having a
+	  problem with the pseries core and want to see more of what is
+	  going on. This does not enable debugging in lpar.c, which must
+	  be manually done due to its verbosity.
 	default y
 
 config PPC_SMLPAR
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 34b7dc1..17a11c8 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -21,8 +21,6 @@
  * Please address comments and feedback to Linas Vepstas <linas@austin.ibm.com>
  */
 
-#undef DEBUG
-
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/list.h>
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
index 4b7a062..5fcc92a 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -25,8 +25,6 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#undef DEBUG
-
 #include <linux/pci.h>
 #include <asm/pci-bridge.h>
 #include <asm/ppc-pci.h>