treewide: fix a few typos in comments
- kenrel -> kernel
- whetehr -> whether
- ttt -> tt
- sss -> ss
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c
index e54712b..d11fbb2 100644
--- a/drivers/net/can/pch_can.c
+++ b/drivers/net/can/pch_can.c
@@ -653,7 +653,7 @@
u16 data_reg;
do {
- /* Reading the messsage object from the Message RAM */
+ /* Reading the message object from the Message RAM */
iowrite32(PCH_CMASK_RX_TX_GET, &priv->regs->ifregs[0].cmask);
pch_can_rw_msg_obj(&priv->regs->ifregs[0].creq, obj_num);
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index 872183f..d532dde 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -1800,7 +1800,7 @@
MessageCount = inb(iobase+ FIR_LSR)&0x07;
if (MessageCount > 0)
- IRDA_DEBUG(0, "%s(), Messsage count = %d,\n", __func__ , MessageCount);
+ IRDA_DEBUG(0, "%s(), Message count = %d,\n", __func__ , MessageCount);
for (i=0; i<=MessageCount; i++)
{
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 337bdcd..665c3d8 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -7231,7 +7231,7 @@
/* As per the HW requirement we need to replenish the
* receive buffer to avoid the ring bump. Since there is
* no intention of processing the Rx frame at this pointwe are
- * just settting the ownership bit of rxd in Each Rx
+ * just setting the ownership bit of rxd in Each Rx
* ring to HW and set the appropriate buffer size
* based on the ring mode
*/
diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c
index 6f92e48..cfd8881 100644
--- a/drivers/net/ucc_geth_ethtool.c
+++ b/drivers/net/ucc_geth_ethtool.c
@@ -6,7 +6,7 @@
* Author: Li Yang <leoli@freescale.com>
*
* Limitation:
- * Can only get/set setttings of the first queue.
+ * Can only get/set settings of the first queue.
* Need to re-open the interface manually after changing some parameters.
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index 069c1cf..fef9ecc 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -109,7 +109,7 @@
/* take the first altsetting with in-bulk + out-bulk;
* remember any status endpoint, just in case;
- * ignore other endpoints and altsetttings.
+ * ignore other endpoints and altsettings.
*/
for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) {
struct usb_host_endpoint *e;
diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c
index f875cfa..737b59f 100644
--- a/drivers/net/wan/pc300_drv.c
+++ b/drivers/net/wan/pc300_drv.c
@@ -1445,7 +1445,7 @@
* Description: In the remote loopback mode the clock and data recovered
* from the line inputs RL1/2 or RDIP/RDIN are routed back
* to the line outputs XL1/2 or XDOP/XDON via the analog
- * transmitter. As in normal mode they are processsed by
+ * transmitter. As in normal mode they are processed by
* the synchronizer and then sent to the system interface.
*----------------------------------------------------------------------------
*/
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 6eadf97..aa1ba5d 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3329,26 +3329,26 @@
else
cptr = AR9300_BASE_ADDR;
ath_dbg(common, ATH_DBG_EEPROM,
- "Trying EEPROM accesss at Address 0x%04x\n", cptr);
+ "Trying EEPROM access at Address 0x%04x\n", cptr);
if (ar9300_check_eeprom_header(ah, read, cptr))
goto found;
cptr = AR9300_BASE_ADDR_512;
ath_dbg(common, ATH_DBG_EEPROM,
- "Trying EEPROM accesss at Address 0x%04x\n", cptr);
+ "Trying EEPROM access at Address 0x%04x\n", cptr);
if (ar9300_check_eeprom_header(ah, read, cptr))
goto found;
read = ar9300_read_otp;
cptr = AR9300_BASE_ADDR;
ath_dbg(common, ATH_DBG_EEPROM,
- "Trying OTP accesss at Address 0x%04x\n", cptr);
+ "Trying OTP access at Address 0x%04x\n", cptr);
if (ar9300_check_eeprom_header(ah, read, cptr))
goto found;
cptr = AR9300_BASE_ADDR_512;
ath_dbg(common, ATH_DBG_EEPROM,
- "Trying OTP accesss at Address 0x%04x\n", cptr);
+ "Trying OTP access at Address 0x%04x\n", cptr);
if (ar9300_check_eeprom_header(ah, read, cptr))
goto found;
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 42c3fe3..87813c3 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -7430,7 +7430,7 @@
priv->assoc_request.capability &=
~cpu_to_le16(WLAN_CAPABILITY_SHORT_SLOT_TIME);
- IPW_DEBUG_ASSOC("%sssocation attempt: '%s', channel %d, "
+ IPW_DEBUG_ASSOC("%ssociation attempt: '%s', channel %d, "
"802.11%c [%d], %s[:%s], enc=%s%s%s%c%c\n",
roaming ? "Rea" : "A",
print_ssid(ssid, priv->essid, priv->essid_len),