[TG3]: Add 5709 PHY support.
Add support for the 5709 10/100 PHY.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 2f5e00c..9259d12 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -1624,6 +1624,7 @@
#define MII_TG3_DSP_RW_PORT 0x15 /* DSP coefficient read/write port */
#define MII_TG3_DSP_ADDRESS 0x17 /* DSP address register */
+#define MII_TG3_EPHY_PTEST 0x17 /* 5906 PHY register */
#define MII_TG3_AUX_CTRL 0x18 /* auxilliary control register */
@@ -1637,6 +1638,8 @@
#define MII_TG3_AUX_STAT_100FULL 0x0500
#define MII_TG3_AUX_STAT_1000HALF 0x0600
#define MII_TG3_AUX_STAT_1000FULL 0x0700
+#define MII_TG3_AUX_STAT_100 0x0008
+#define MII_TG3_AUX_STAT_FULL 0x0001
#define MII_TG3_ISTAT 0x1a /* IRQ status register */
#define MII_TG3_IMASK 0x1b /* IRQ mask register */
@@ -1647,6 +1650,9 @@
#define MII_TG3_INT_DUPLEXCHG 0x0008
#define MII_TG3_INT_ANEG_PAGE_RX 0x0400
+#define MII_TG3_EPHY_TEST 0x1f /* 5906 PHY register */
+#define MII_TG3_EPHY_SHADOW_EN 0x80
+
/* There are two ways to manage the TX descriptors on the tigon3.
* Either the descriptors are in host DMA'able memory, or they
* exist only in the cards on-chip SRAM. All 16 send bds are under