Merge branch 'rtc-sa1100' of git://github.com/hzhuang1/linux into next/drivers
* 'rtc-sa1100' of git://github.com/hzhuang1/linux:
ARM: mmp: enable rtc in pxa910
rtc: sa1100: enable clk support
ARM: pxa: add rtc dummy clock
ARM: sa1100: clean up clock support
rtc: sa1100: declare irq in resource
rtc: sa1100: remove verification code of alarm
rtc: sa1100: remove periodic code
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index a0ffac0..1bea46a 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -510,17 +510,3 @@
convert to using pci_scan_root_bus() so they can supply a list of
bus resources when the bus is created.
Who: Bjorn Helgaas <bhelgaas@google.com>
-
-----------------------------
-
-What: The CAP9 SoC family will be removed
-When: 3.4
-Files: arch/arm/mach-at91/at91cap9.c
- arch/arm/mach-at91/at91cap9_devices.c
- arch/arm/mach-at91/include/mach/at91cap9.h
- arch/arm/mach-at91/include/mach/at91cap9_matrix.h
- arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
- arch/arm/mach-at91/board-cap9adk.c
-Why: The code is not actively maintained and platforms are now hard to find.
-Who: Nicolas Ferre <nicolas.ferre@atmel.com>
- Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6e40039..baf6dc6 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -324,7 +324,7 @@
select CLKDEV_LOOKUP
help
This enables support for systems based on the Atmel AT91RM9200,
- AT91SAM9 and AT91CAP9 processors.
+ AT91SAM9 processors.
config ARCH_BCMRING
bool "Broadcom BCMRING"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index e0d236d..66ca801 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -81,47 +81,14 @@
prompt "Kernel low-level debugging port"
depends on DEBUG_LL
- config DEBUG_LL_UART_NONE
- bool "No low-level debugging UART"
- help
- Say Y here if your platform doesn't provide a UART option
- below. This relies on your platform choosing the right UART
- definition internally in order for low-level debugging to
- work.
-
- config DEBUG_ICEDCC
- bool "Kernel low-level debugging via EmbeddedICE DCC channel"
- help
- Say Y here if you want the debug print routines to direct
- their output to the EmbeddedICE macrocell's DCC channel using
- co-processor 14. This is known to work on the ARM9 style ICE
- channel and on the XScale with the PEEDI.
-
- Note that the system will appear to hang during boot if there
- is nothing connected to read from the DCC.
-
config AT91_DEBUG_LL_DBGU0
bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl"
depends on HAVE_AT91_DBGU0
config AT91_DEBUG_LL_DBGU1
- bool "Kernel low-level debugging on 9263, 9g45 and cap9"
+ bool "Kernel low-level debugging on 9263 and 9g45"
depends on HAVE_AT91_DBGU1
- config DEBUG_FOOTBRIDGE_COM1
- bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
- depends on FOOTBRIDGE
- help
- Say Y here if you want the debug print routines to direct
- their output to the 8250 at PCI COM1.
-
- config DEBUG_DC21285_PORT
- bool "Kernel low-level debugging messages via footbridge serial port"
- depends on FOOTBRIDGE
- help
- Say Y here if you want the debug print routines to direct
- their output to the serial port in the DC21285 (Footbridge).
-
config DEBUG_CLPS711X_UART1
bool "Kernel low-level debugging messages via UART1"
depends on ARCH_CLPS711X
@@ -136,6 +103,20 @@
Say Y here if you want the debug print routines to direct
their output to the second serial port on these devices.
+ config DEBUG_DC21285_PORT
+ bool "Kernel low-level debugging messages via footbridge serial port"
+ depends on FOOTBRIDGE
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the serial port in the DC21285 (Footbridge).
+
+ config DEBUG_FOOTBRIDGE_COM1
+ bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
+ depends on FOOTBRIDGE
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the 8250 at PCI COM1.
+
config DEBUG_HIGHBANK_UART
bool "Kernel low-level debugging messages via Highbank UART"
depends on ARCH_HIGHBANK
@@ -199,61 +180,12 @@
Say Y here if you want kernel low-level debugging support
on i.MX50 or i.MX53.
- config DEBUG_IMX6Q_UART
- bool "i.MX6Q Debug UART"
+ config DEBUG_IMX6Q_UART4
+ bool "i.MX6Q Debug UART4"
depends on SOC_IMX6Q
help
Say Y here if you want kernel low-level debugging support
- on i.MX6Q.
-
- config DEBUG_S3C_UART0
- depends on PLAT_SAMSUNG
- bool "Use S3C UART 0 for low-level debug"
- help
- Say Y here if you want the debug print routines to direct
- their output to UART 0. The port must have been initialised
- by the boot-loader before use.
-
- The uncompressor code port configuration is now handled
- by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
- config DEBUG_S3C_UART1
- depends on PLAT_SAMSUNG
- bool "Use S3C UART 1 for low-level debug"
- help
- Say Y here if you want the debug print routines to direct
- their output to UART 1. The port must have been initialised
- by the boot-loader before use.
-
- The uncompressor code port configuration is now handled
- by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
- config DEBUG_S3C_UART2
- depends on PLAT_SAMSUNG
- bool "Use S3C UART 2 for low-level debug"
- help
- Say Y here if you want the debug print routines to direct
- their output to UART 2. The port must have been initialised
- by the boot-loader before use.
-
- The uncompressor code port configuration is now handled
- by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
- config DEBUG_REALVIEW_STD_PORT
- bool "RealView Default UART"
- depends on ARCH_REALVIEW
- help
- Say Y here if you want the debug print routines to direct
- their output to the serial port on RealView EB, PB11MP, PBA8
- and PBX platforms.
-
- config DEBUG_REALVIEW_PB1176_PORT
- bool "RealView PB1176 UART"
- depends on MACH_REALVIEW_PB1176
- help
- Say Y here if you want the debug print routines to direct
- their output to the standard serial port on the RealView
- PB1176 platform.
+ on i.MX6Q UART4.
config DEBUG_MSM_UART1
bool "Kernel low-level debugging messages via MSM UART1"
@@ -292,6 +224,74 @@
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM 8960 devices.
+ config DEBUG_REALVIEW_STD_PORT
+ bool "RealView Default UART"
+ depends on ARCH_REALVIEW
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the serial port on RealView EB, PB11MP, PBA8
+ and PBX platforms.
+
+ config DEBUG_REALVIEW_PB1176_PORT
+ bool "RealView PB1176 UART"
+ depends on MACH_REALVIEW_PB1176
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the standard serial port on the RealView
+ PB1176 platform.
+
+ config DEBUG_S3C_UART0
+ depends on PLAT_SAMSUNG
+ bool "Use S3C UART 0 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 0. The port must have been initialised
+ by the boot-loader before use.
+
+ The uncompressor code port configuration is now handled
+ by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+ config DEBUG_S3C_UART1
+ depends on PLAT_SAMSUNG
+ bool "Use S3C UART 1 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 1. The port must have been initialised
+ by the boot-loader before use.
+
+ The uncompressor code port configuration is now handled
+ by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+ config DEBUG_S3C_UART2
+ depends on PLAT_SAMSUNG
+ bool "Use S3C UART 2 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 2. The port must have been initialised
+ by the boot-loader before use.
+
+ The uncompressor code port configuration is now handled
+ by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+ config DEBUG_LL_UART_NONE
+ bool "No low-level debugging UART"
+ help
+ Say Y here if your platform doesn't provide a UART option
+ below. This relies on your platform choosing the right UART
+ definition internally in order for low-level debugging to
+ work.
+
+ config DEBUG_ICEDCC
+ bool "Kernel low-level debugging via EmbeddedICE DCC channel"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the EmbeddedICE macrocell's DCC channel using
+ co-processor 14. This is known to work on the ARM9 style ICE
+ channel and on the XScale with the PEEDI.
+
+ Note that the system will appear to hang during boot if there
+ is nothing connected to read from the DCC.
+
endchoice
config EARLY_PRINTK
diff --git a/arch/arm/configs/at91cap9_defconfig b/arch/arm/configs/at91cap9_defconfig
deleted file mode 100644
index 8826eb2..0000000
--- a/arch/arm/configs/at91cap9_defconfig
+++ /dev/null
@@ -1,108 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91CAP9=y
-CONFIG_MACH_AT91CAP9ADK=y
-CONFIG_MTD_AT91_DATAFLASH_CARD=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_FB=y
-CONFIG_FB_ATMEL=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_MMC=y
-CONFIG_MMC_AT91=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_EXT2_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index a22e930..d9eddfd 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -45,6 +45,7 @@
CONFIG_FPE_NWFPE_XP=y
CONFIG_PM_DEBUG=y
CONFIG_NET=y
+CONFIG_SMSC911X=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
@@ -78,6 +79,8 @@
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
CONFIG_NETDEVICES=y
+CONFIG_CS89x0=y
+CONFIG_CS89x0_PLATFORM=y
CONFIG_DM9000=y
CONFIG_SMC91X=y
CONFIG_SMC911X=y
@@ -115,6 +118,21 @@
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_LCD_L4F00242T03=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_MEDIA=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_CONTIG=y
+CONFIG_VIDEOBUF2_CORE=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_OV2640=y
+CONFIG_VIDEO_MX2_HOSTSUPPORT=y
+CONFIG_VIDEO_MX2=y
CONFIG_BACKLIGHT_PWM=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 3a4fb2e..6ae457a 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -26,7 +26,6 @@
CONFIG_MACH_KZM_ARM11_01=y
CONFIG_MACH_PCM043=y
CONFIG_MACH_MX35_3DS=y
-CONFIG_MACH_EUKREA_CPUIMX35=y
CONFIG_MACH_VPR200=y
CONFIG_MACH_IMX51_DT=y
CONFIG_MACH_MX51_3DS=y
@@ -82,8 +81,9 @@
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
+CONFIG_CS89x0=y
+CONFIG_CS89x0_PLATFORM=y
# CONFIG_NET_VENDOR_FARADAY is not set
-CONFIG_FEC=y
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
@@ -126,7 +126,39 @@
CONFIG_IMX2_WDT=y
CONFIG_MFD_MC13XXX=y
CONFIG_REGULATOR=y
+CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF2_CORE=y
+CONFIG_VIDEOBUF2_MEMOPS=y
+CONFIG_VIDEOBUF2_DMA_CONTIG=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_OV2640=y
+CONFIG_MX3_VIDEO=y
+CONFIG_VIDEO_MX3=y
+CONFIG_FB=y
+CONFIG_FB_MX3=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_L4F00242T03=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_MXC=y
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index e4c96cc..424aa45 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -110,6 +110,7 @@
void soft_restart(unsigned long);
extern void (*arm_pm_restart)(char str, const char *cmd);
+extern void (*arm_pm_idle)(void);
#define UDBG_UNDEFINED (1 << 0)
#define UDBG_SYSCALL (1 << 1)
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 971d65c..008e7ce 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -61,8 +61,6 @@
static volatile int hlt_counter;
-#include <mach/system.h>
-
void disable_hlt(void)
{
hlt_counter++;
@@ -181,13 +179,17 @@
EXPORT_SYMBOL_GPL(cpu_idle_wait);
/*
- * This is our default idle handler. We need to disable
- * interrupts here to ensure we don't miss a wakeup call.
+ * This is our default idle handler.
*/
+
+void (*arm_pm_idle)(void);
+
static void default_idle(void)
{
- if (!need_resched())
- arch_idle();
+ if (arm_pm_idle)
+ arm_pm_idle();
+ else
+ cpu_do_idle();
local_irq_enable();
}
@@ -215,6 +217,10 @@
cpu_die();
#endif
+ /*
+ * We need to disable interrupts here
+ * to ensure we don't miss a wakeup call.
+ */
local_irq_disable();
#ifdef CONFIG_PL310_ERRATA_769419
wmb();
@@ -222,19 +228,18 @@
if (hlt_counter) {
local_irq_enable();
cpu_relax();
- } else {
+ } else if (!need_resched()) {
stop_critical_timings();
if (cpuidle_idle_call())
pm_idle();
start_critical_timings();
/*
- * This will eventually be removed - pm_idle
- * functions should always return with IRQs
- * enabled.
+ * pm_idle functions must always
+ * return with IRQs enabled.
*/
WARN_ON(irqs_disabled());
+ } else
local_irq_enable();
- }
}
leds_event(led_idle_end);
rcu_idle_exit();
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 71feb00..0284e66 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -102,15 +102,6 @@
select HAVE_AT91_DBGU1
select AT91_SAM9G45_RESET
-config ARCH_AT91CAP9
- bool "AT91CAP9"
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
- select HAVE_FB_ATMEL
- select HAVE_NET_MACB
- select HAVE_AT91_DBGU1
- select AT91_SAM9G45_RESET
-
config ARCH_AT91X40
bool "AT91x40"
select ARCH_USES_GETTIMEOFFSET
@@ -447,21 +438,6 @@
# ----------------------------------------------------------
-if ARCH_AT91CAP9
-
-comment "AT91CAP9 Board Type"
-
-config MACH_AT91CAP9ADK
- bool "Atmel AT91CAP9A-DK Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138>
-
-endif
-
-# ----------------------------------------------------------
-
if ARCH_AT91X40
comment "AT91X40 Board Type"
@@ -544,7 +520,7 @@
depends on HAVE_AT91_DBGU0
config AT91_EARLY_DBGU1
- bool "DBGU on 9263, 9g45 and cap9"
+ bool "DBGU on 9263 and 9g45"
depends on HAVE_AT91_DBGU1
config AT91_EARLY_USART0
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 705e1fb..aeb76f1 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -20,7 +20,6 @@
obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
# AT91RM9200 board-specific support
@@ -81,9 +80,6 @@
# AT91SAM board with device-tree
obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o
-# AT91CAP9 board-specific support
-obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o
-
# AT91X40 board-specific support
obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 8ddafad..2fd051e 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -3,11 +3,7 @@
# PARAMS_PHYS must be within 4MB of ZRELADDR
# INITRD_PHYS must be in RAM
-ifeq ($(CONFIG_ARCH_AT91CAP9),y)
- zreladdr-y += 0x70008000
-params_phys-y := 0x70000100
-initrd_phys-y := 0x70410000
-else ifeq ($(CONFIG_ARCH_AT91SAM9G45),y)
+ifeq ($(CONFIG_ARCH_AT91SAM9G45),y)
zreladdr-y += 0x70008000
params_phys-y := 0x70000100
initrd_phys-y := 0x70410000
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
deleted file mode 100644
index a42edc2..0000000
--- a/arch/arm/mach-at91/at91cap9.c
+++ /dev/null
@@ -1,396 +0,0 @@
-/*
- * arch/arm/mach-at91/at91cap9.c
- *
- * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- * Copyright (C) 2007 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/module.h>
-
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/cpu.h>
-#include <mach/at91cap9.h>
-#include <mach/at91_pmc.h>
-
-#include "soc.h"
-#include "generic.h"
-#include "clock.h"
-#include "sam9_smc.h"
-
-/* --------------------------------------------------------------------
- * Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioABCD_clk = {
- .name = "pioABCD_clk",
- .pmc_mask = 1 << AT91CAP9_ID_PIOABCD,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mpb0_clk = {
- .name = "mpb0_clk",
- .pmc_mask = 1 << AT91CAP9_ID_MPB0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mpb1_clk = {
- .name = "mpb1_clk",
- .pmc_mask = 1 << AT91CAP9_ID_MPB1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mpb2_clk = {
- .name = "mpb2_clk",
- .pmc_mask = 1 << AT91CAP9_ID_MPB2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mpb3_clk = {
- .name = "mpb3_clk",
- .pmc_mask = 1 << AT91CAP9_ID_MPB3,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mpb4_clk = {
- .name = "mpb4_clk",
- .pmc_mask = 1 << AT91CAP9_ID_MPB4,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
- .name = "usart0_clk",
- .pmc_mask = 1 << AT91CAP9_ID_US0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
- .name = "usart1_clk",
- .pmc_mask = 1 << AT91CAP9_ID_US1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
- .name = "usart2_clk",
- .pmc_mask = 1 << AT91CAP9_ID_US2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc0_clk = {
- .name = "mci0_clk",
- .pmc_mask = 1 << AT91CAP9_ID_MCI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc1_clk = {
- .name = "mci1_clk",
- .pmc_mask = 1 << AT91CAP9_ID_MCI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk can_clk = {
- .name = "can_clk",
- .pmc_mask = 1 << AT91CAP9_ID_CAN,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi_clk = {
- .name = "twi_clk",
- .pmc_mask = 1 << AT91CAP9_ID_TWI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
- .name = "spi0_clk",
- .pmc_mask = 1 << AT91CAP9_ID_SPI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
- .name = "spi1_clk",
- .pmc_mask = 1 << AT91CAP9_ID_SPI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc0_clk = {
- .name = "ssc0_clk",
- .pmc_mask = 1 << AT91CAP9_ID_SSC0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc1_clk = {
- .name = "ssc1_clk",
- .pmc_mask = 1 << AT91CAP9_ID_SSC1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ac97_clk = {
- .name = "ac97_clk",
- .pmc_mask = 1 << AT91CAP9_ID_AC97C,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tcb_clk = {
- .name = "tcb_clk",
- .pmc_mask = 1 << AT91CAP9_ID_TCB,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pwm_clk = {
- .name = "pwm_clk",
- .pmc_mask = 1 << AT91CAP9_ID_PWMC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk macb_clk = {
- .name = "pclk",
- .pmc_mask = 1 << AT91CAP9_ID_EMAC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk aestdes_clk = {
- .name = "aestdes_clk",
- .pmc_mask = 1 << AT91CAP9_ID_AESTDES,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk adc_clk = {
- .name = "adc_clk",
- .pmc_mask = 1 << AT91CAP9_ID_ADC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk isi_clk = {
- .name = "isi_clk",
- .pmc_mask = 1 << AT91CAP9_ID_ISI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk lcdc_clk = {
- .name = "lcdc_clk",
- .pmc_mask = 1 << AT91CAP9_ID_LCDC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk dma_clk = {
- .name = "dma_clk",
- .pmc_mask = 1 << AT91CAP9_ID_DMA,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk udphs_clk = {
- .name = "udphs_clk",
- .pmc_mask = 1 << AT91CAP9_ID_UDPHS,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ohci_clk = {
- .name = "ohci_clk",
- .pmc_mask = 1 << AT91CAP9_ID_UHP,
- .type = CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk *periph_clocks[] __initdata = {
- &pioABCD_clk,
- &mpb0_clk,
- &mpb1_clk,
- &mpb2_clk,
- &mpb3_clk,
- &mpb4_clk,
- &usart0_clk,
- &usart1_clk,
- &usart2_clk,
- &mmc0_clk,
- &mmc1_clk,
- &can_clk,
- &twi_clk,
- &spi0_clk,
- &spi1_clk,
- &ssc0_clk,
- &ssc1_clk,
- &ac97_clk,
- &tcb_clk,
- &pwm_clk,
- &macb_clk,
- &aestdes_clk,
- &adc_clk,
- &isi_clk,
- &lcdc_clk,
- &dma_clk,
- &udphs_clk,
- &ohci_clk,
- // irq0 .. irq1
-};
-
-static struct clk_lookup periph_clocks_lookups[] = {
- /* One additional fake clock for macb_hclk */
- CLKDEV_CON_ID("hclk", &macb_clk),
- CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
- CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
- CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
- CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
- CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
- /* fake hclk clock */
- CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
- CLKDEV_CON_ID("pioA", &pioABCD_clk),
- CLKDEV_CON_ID("pioB", &pioABCD_clk),
- CLKDEV_CON_ID("pioC", &pioABCD_clk),
- CLKDEV_CON_ID("pioD", &pioABCD_clk),
-};
-
-static struct clk_lookup usart_clocks_lookups[] = {
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
-};
-
-/*
- * The four programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
- .name = "pck0",
- .pmc_mask = AT91_PMC_PCK0,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 0,
-};
-static struct clk pck1 = {
- .name = "pck1",
- .pmc_mask = AT91_PMC_PCK1,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 1,
-};
-static struct clk pck2 = {
- .name = "pck2",
- .pmc_mask = AT91_PMC_PCK2,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 2,
-};
-static struct clk pck3 = {
- .name = "pck3",
- .pmc_mask = AT91_PMC_PCK3,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 3,
-};
-
-static void __init at91cap9_register_clocks(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
- clk_register(periph_clocks[i]);
-
- clkdev_add_table(periph_clocks_lookups,
- ARRAY_SIZE(periph_clocks_lookups));
- clkdev_add_table(usart_clocks_lookups,
- ARRAY_SIZE(usart_clocks_lookups));
-
- clk_register(&pck0);
- clk_register(&pck1);
- clk_register(&pck2);
- clk_register(&pck3);
-}
-
-static struct clk_lookup console_clock_lookup;
-
-void __init at91cap9_set_console_clock(int id)
-{
- if (id >= ARRAY_SIZE(usart_clocks_lookups))
- return;
-
- console_clock_lookup.con_id = "usart";
- console_clock_lookup.clk = usart_clocks_lookups[id].clk;
- clkdev_add(&console_clock_lookup);
-}
-
-/* --------------------------------------------------------------------
- * GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at91cap9_gpio[] __initdata = {
- {
- .id = AT91CAP9_ID_PIOABCD,
- .regbase = AT91CAP9_BASE_PIOA,
- }, {
- .id = AT91CAP9_ID_PIOABCD,
- .regbase = AT91CAP9_BASE_PIOB,
- }, {
- .id = AT91CAP9_ID_PIOABCD,
- .regbase = AT91CAP9_BASE_PIOC,
- }, {
- .id = AT91CAP9_ID_PIOABCD,
- .regbase = AT91CAP9_BASE_PIOD,
- }
-};
-
-/* --------------------------------------------------------------------
- * AT91CAP9 processor initialization
- * -------------------------------------------------------------------- */
-
-static void __init at91cap9_map_io(void)
-{
- at91_init_sram(0, AT91CAP9_SRAM_BASE, AT91CAP9_SRAM_SIZE);
-}
-
-static void __init at91cap9_ioremap_registers(void)
-{
- at91_ioremap_shdwc(AT91CAP9_BASE_SHDWC);
- at91_ioremap_rstc(AT91CAP9_BASE_RSTC);
- at91sam926x_ioremap_pit(AT91CAP9_BASE_PIT);
- at91sam9_ioremap_smc(0, AT91CAP9_BASE_SMC);
-}
-
-static void __init at91cap9_initialize(void)
-{
- arm_pm_restart = at91sam9g45_restart;
- at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
-
- /* Register GPIO subsystem */
- at91_gpio_init(at91cap9_gpio, 4);
-
- /* Remember the silicon revision */
- if (cpu_is_at91cap9_revB())
- system_rev = 0xB;
- else if (cpu_is_at91cap9_revC())
- system_rev = 0xC;
-}
-
-/* --------------------------------------------------------------------
- * Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 7, /* Advanced Interrupt Controller (FIQ) */
- 7, /* System Peripherals */
- 1, /* Parallel IO Controller A, B, C and D */
- 0, /* MP Block Peripheral 0 */
- 0, /* MP Block Peripheral 1 */
- 0, /* MP Block Peripheral 2 */
- 0, /* MP Block Peripheral 3 */
- 0, /* MP Block Peripheral 4 */
- 5, /* USART 0 */
- 5, /* USART 1 */
- 5, /* USART 2 */
- 0, /* Multimedia Card Interface 0 */
- 0, /* Multimedia Card Interface 1 */
- 3, /* CAN */
- 6, /* Two-Wire Interface */
- 5, /* Serial Peripheral Interface 0 */
- 5, /* Serial Peripheral Interface 1 */
- 4, /* Serial Synchronous Controller 0 */
- 4, /* Serial Synchronous Controller 1 */
- 5, /* AC97 Controller */
- 0, /* Timer Counter 0, 1 and 2 */
- 0, /* Pulse Width Modulation Controller */
- 3, /* Ethernet */
- 0, /* Advanced Encryption Standard, Triple DES*/
- 0, /* Analog-to-Digital Converter */
- 0, /* Image Sensor Interface */
- 3, /* LCD Controller */
- 0, /* DMA Controller */
- 2, /* USB Device Port */
- 2, /* USB Host port */
- 0, /* Advanced Interrupt Controller (IRQ0) */
- 0, /* Advanced Interrupt Controller (IRQ1) */
-};
-
-struct at91_init_soc __initdata at91cap9_soc = {
- .map_io = at91cap9_map_io,
- .default_irq_priority = at91cap9_default_irq_priority,
- .ioremap_registers = at91cap9_ioremap_registers,
- .register_clocks = at91cap9_register_clocks,
- .init = at91cap9_initialize,
-};
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
deleted file mode 100644
index d298fb7..0000000
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ /dev/null
@@ -1,1273 +0,0 @@
-/*
- * arch/arm/mach-at91/at91cap9_devices.c
- *
- * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- * Copyright (C) 2007 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/i2c-gpio.h>
-
-#include <video/atmel_lcdc.h>
-
-#include <mach/board.h>
-#include <mach/cpu.h>
-#include <mach/at91cap9.h>
-#include <mach/at91cap9_matrix.h>
-#include <mach/at91sam9_smc.h>
-
-#include "generic.h"
-
-
-/* --------------------------------------------------------------------
- * USB Host
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-static struct at91_usbh_data usbh_data;
-
-static struct resource usbh_resources[] = {
- [0] = {
- .start = AT91CAP9_UHP_BASE,
- .end = AT91CAP9_UHP_BASE + SZ_1M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_UHP,
- .end = AT91CAP9_ID_UHP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91_usbh_device = {
- .name = "at91_ohci",
- .id = -1,
- .dev = {
- .dma_mask = &ohci_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &usbh_data,
- },
- .resource = usbh_resources,
- .num_resources = ARRAY_SIZE(usbh_resources),
-};
-
-void __init at91_add_device_usbh(struct at91_usbh_data *data)
-{
- int i;
-
- if (!data)
- return;
-
- if (cpu_is_at91cap9_revB())
- irq_set_irq_type(AT91CAP9_ID_UHP, IRQ_TYPE_LEVEL_HIGH);
-
- /* Enable VBus control for UHP ports */
- for (i = 0; i < data->ports; i++) {
- if (gpio_is_valid(data->vbus_pin[i]))
- at91_set_gpio_output(data->vbus_pin[i], 0);
- }
-
- /* Enable overcurrent notification */
- for (i = 0; i < data->ports; i++) {
- if (data->overcurrent_pin[i])
- at91_set_gpio_input(data->overcurrent_pin[i], 1);
- }
-
- usbh_data = *data;
- platform_device_register(&at91_usbh_device);
-}
-#else
-void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * USB HS Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
-
-static struct resource usba_udc_resources[] = {
- [0] = {
- .start = AT91CAP9_UDPHS_FIFO,
- .end = AT91CAP9_UDPHS_FIFO + SZ_512K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_BASE_UDPHS,
- .end = AT91CAP9_BASE_UDPHS + SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = AT91CAP9_ID_UDPHS,
- .end = AT91CAP9_ID_UDPHS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
- [idx] = { \
- .name = nam, \
- .index = idx, \
- .fifo_size = maxpkt, \
- .nr_banks = maxbk, \
- .can_dma = dma, \
- .can_isoc = isoc, \
- }
-
-static struct usba_ep_data usba_udc_ep[] = {
- EP("ep0", 0, 64, 1, 0, 0),
- EP("ep1", 1, 1024, 3, 1, 1),
- EP("ep2", 2, 1024, 3, 1, 1),
- EP("ep3", 3, 1024, 2, 1, 1),
- EP("ep4", 4, 1024, 2, 1, 1),
- EP("ep5", 5, 1024, 2, 1, 0),
- EP("ep6", 6, 1024, 2, 1, 0),
- EP("ep7", 7, 1024, 2, 0, 0),
-};
-
-#undef EP
-
-/*
- * pdata doesn't have room for any endpoints, so we need to
- * append room for the ones we need right after it.
- */
-static struct {
- struct usba_platform_data pdata;
- struct usba_ep_data ep[8];
-} usba_udc_data;
-
-static struct platform_device at91_usba_udc_device = {
- .name = "atmel_usba_udc",
- .id = -1,
- .dev = {
- .platform_data = &usba_udc_data.pdata,
- },
- .resource = usba_udc_resources,
- .num_resources = ARRAY_SIZE(usba_udc_resources),
-};
-
-void __init at91_add_device_usba(struct usba_platform_data *data)
-{
- if (cpu_is_at91cap9_revB()) {
- irq_set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH);
- at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS |
- AT91_MATRIX_UDPHS_BYPASS_LOCK);
- }
- else
- at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS);
-
- /*
- * Invalid pins are 0 on AT91, but the usba driver is shared
- * with AVR32, which use negative values instead. Once/if
- * gpio_is_valid() is ported to AT91, revisit this code.
- */
- usba_udc_data.pdata.vbus_pin = -EINVAL;
- usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
- memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
-
- if (data && gpio_is_valid(data->vbus_pin)) {
- at91_set_gpio_input(data->vbus_pin, 0);
- at91_set_deglitch(data->vbus_pin, 1);
- usba_udc_data.pdata.vbus_pin = data->vbus_pin;
- }
-
- /* Pullup pin is handled internally by USB device peripheral */
-
- platform_device_register(&at91_usba_udc_device);
-}
-#else
-void __init at91_add_device_usba(struct usba_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Ethernet
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
-static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct macb_platform_data eth_data;
-
-static struct resource eth_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_EMAC,
- .end = AT91CAP9_BASE_EMAC + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_EMAC,
- .end = AT91CAP9_ID_EMAC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_eth_device = {
- .name = "macb",
- .id = -1,
- .dev = {
- .dma_mask = ð_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = ð_data,
- },
- .resource = eth_resources,
- .num_resources = ARRAY_SIZE(eth_resources),
-};
-
-void __init at91_add_device_eth(struct macb_platform_data *data)
-{
- if (!data)
- return;
-
- if (gpio_is_valid(data->phy_irq_pin)) {
- at91_set_gpio_input(data->phy_irq_pin, 0);
- at91_set_deglitch(data->phy_irq_pin, 1);
- }
-
- /* Pins used for MII and RMII */
- at91_set_A_periph(AT91_PIN_PB21, 0); /* ETXCK_EREFCK */
- at91_set_A_periph(AT91_PIN_PB22, 0); /* ERXDV */
- at91_set_A_periph(AT91_PIN_PB25, 0); /* ERX0 */
- at91_set_A_periph(AT91_PIN_PB26, 0); /* ERX1 */
- at91_set_A_periph(AT91_PIN_PB27, 0); /* ERXER */
- at91_set_A_periph(AT91_PIN_PB28, 0); /* ETXEN */
- at91_set_A_periph(AT91_PIN_PB23, 0); /* ETX0 */
- at91_set_A_periph(AT91_PIN_PB24, 0); /* ETX1 */
- at91_set_A_periph(AT91_PIN_PB30, 0); /* EMDIO */
- at91_set_A_periph(AT91_PIN_PB29, 0); /* EMDC */
-
- if (!data->is_rmii) {
- at91_set_B_periph(AT91_PIN_PC25, 0); /* ECRS */
- at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
- at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
- at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
- at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
- at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
- at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
- at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
- }
-
- eth_data = *data;
- platform_device_register(&at91cap9_eth_device);
-}
-#else
-void __init at91_add_device_eth(struct macb_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc0_data, mmc1_data;
-
-static struct resource mmc0_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_MCI0,
- .end = AT91CAP9_BASE_MCI0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_MCI0,
- .end = AT91CAP9_ID_MCI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_mmc0_device = {
- .name = "at91_mci",
- .id = 0,
- .dev = {
- .dma_mask = &mmc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &mmc0_data,
- },
- .resource = mmc0_resources,
- .num_resources = ARRAY_SIZE(mmc0_resources),
-};
-
-static struct resource mmc1_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_MCI1,
- .end = AT91CAP9_BASE_MCI1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_MCI1,
- .end = AT91CAP9_ID_MCI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_mmc1_device = {
- .name = "at91_mci",
- .id = 1,
- .dev = {
- .dma_mask = &mmc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &mmc1_data,
- },
- .resource = mmc1_resources,
- .num_resources = ARRAY_SIZE(mmc1_resources),
-};
-
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
-{
- if (!data)
- return;
-
- /* input/irq */
- if (gpio_is_valid(data->det_pin)) {
- at91_set_gpio_input(data->det_pin, 1);
- at91_set_deglitch(data->det_pin, 1);
- }
- if (gpio_is_valid(data->wp_pin))
- at91_set_gpio_input(data->wp_pin, 1);
- if (gpio_is_valid(data->vcc_pin))
- at91_set_gpio_output(data->vcc_pin, 0);
-
- if (mmc_id == 0) { /* MCI0 */
- /* CLK */
- at91_set_A_periph(AT91_PIN_PA2, 0);
-
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA1, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA0, 1);
- if (data->wire4) {
- at91_set_A_periph(AT91_PIN_PA3, 1);
- at91_set_A_periph(AT91_PIN_PA4, 1);
- at91_set_A_periph(AT91_PIN_PA5, 1);
- }
-
- mmc0_data = *data;
- platform_device_register(&at91cap9_mmc0_device);
- } else { /* MCI1 */
- /* CLK */
- at91_set_A_periph(AT91_PIN_PA16, 0);
-
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA17, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA18, 1);
- if (data->wire4) {
- at91_set_A_periph(AT91_PIN_PA19, 1);
- at91_set_A_periph(AT91_PIN_PA20, 1);
- at91_set_A_periph(AT91_PIN_PA21, 1);
- }
-
- mmc1_data = *data;
- platform_device_register(&at91cap9_mmc1_device);
- }
-}
-#else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
-static struct atmel_nand_data nand_data;
-
-#define NAND_BASE AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
- [0] = {
- .start = NAND_BASE,
- .end = NAND_BASE + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_BASE_ECC,
- .end = AT91CAP9_BASE_ECC + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device at91cap9_nand_device = {
- .name = "atmel_nand",
- .id = -1,
- .dev = {
- .platform_data = &nand_data,
- },
- .resource = nand_resources,
- .num_resources = ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct atmel_nand_data *data)
-{
- unsigned long csa;
-
- if (!data)
- return;
-
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
-
- /* enable pin */
- if (gpio_is_valid(data->enable_pin))
- at91_set_gpio_output(data->enable_pin, 1);
-
- /* ready/busy pin */
- if (gpio_is_valid(data->rdy_pin))
- at91_set_gpio_input(data->rdy_pin, 1);
-
- /* card detect pin */
- if (gpio_is_valid(data->det_pin))
- at91_set_gpio_input(data->det_pin, 1);
-
- nand_data = *data;
- platform_device_register(&at91cap9_nand_device);
-}
-#else
-void __init at91_add_device_nand(struct atmel_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * TWI (i2c)
- * -------------------------------------------------------------------- */
-
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-
-static struct i2c_gpio_platform_data pdata = {
- .sda_pin = AT91_PIN_PB4,
- .sda_is_open_drain = 1,
- .scl_pin = AT91_PIN_PB5,
- .scl_is_open_drain = 1,
- .udelay = 2, /* ~100 kHz */
-};
-
-static struct platform_device at91cap9_twi_device = {
- .name = "i2c-gpio",
- .id = -1,
- .dev.platform_data = &pdata,
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- at91_set_GPIO_periph(AT91_PIN_PB4, 1); /* TWD (SDA) */
- at91_set_multi_drive(AT91_PIN_PB4, 1);
-
- at91_set_GPIO_periph(AT91_PIN_PB5, 1); /* TWCK (SCL) */
- at91_set_multi_drive(AT91_PIN_PB5, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91cap9_twi_device);
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_TWI,
- .end = AT91CAP9_BASE_TWI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_TWI,
- .end = AT91CAP9_ID_TWI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_twi_device = {
- .name = "at91_i2c",
- .id = -1,
- .resource = twi_resources,
- .num_resources = ARRAY_SIZE(twi_resources),
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- /* pins used for TWI interface */
- at91_set_B_periph(AT91_PIN_PB4, 0); /* TWD */
- at91_set_multi_drive(AT91_PIN_PB4, 1);
-
- at91_set_B_periph(AT91_PIN_PB5, 0); /* TWCK */
- at91_set_multi_drive(AT91_PIN_PB5, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91cap9_twi_device);
-}
-#else
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-/* --------------------------------------------------------------------
- * SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-static struct resource spi0_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_SPI0,
- .end = AT91CAP9_BASE_SPI0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_SPI0,
- .end = AT91CAP9_ID_SPI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_spi0_device = {
- .name = "atmel_spi",
- .id = 0,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi0_resources,
- .num_resources = ARRAY_SIZE(spi0_resources),
-};
-
-static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PD0, AT91_PIN_PD1 };
-
-static struct resource spi1_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_SPI1,
- .end = AT91CAP9_BASE_SPI1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_SPI1,
- .end = AT91CAP9_ID_SPI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_spi1_device = {
- .name = "atmel_spi",
- .id = 1,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi1_resources,
- .num_resources = ARRAY_SIZE(spi1_resources),
-};
-
-static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
- int i;
- unsigned long cs_pin;
- short enable_spi0 = 0;
- short enable_spi1 = 0;
-
- /* Choose SPI chip-selects */
- for (i = 0; i < nr_devices; i++) {
- if (devices[i].controller_data)
- cs_pin = (unsigned long) devices[i].controller_data;
- else if (devices[i].bus_num == 0)
- cs_pin = spi0_standard_cs[devices[i].chip_select];
- else
- cs_pin = spi1_standard_cs[devices[i].chip_select];
-
- if (devices[i].bus_num == 0)
- enable_spi0 = 1;
- else
- enable_spi1 = 1;
-
- /* enable chip-select pin */
- at91_set_gpio_output(cs_pin, 1);
-
- /* pass chip-select pin to driver */
- devices[i].controller_data = (void *) cs_pin;
- }
-
- spi_register_board_info(devices, nr_devices);
-
- /* Configure SPI bus(es) */
- if (enable_spi0) {
- at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
- at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
- at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
-
- platform_device_register(&at91cap9_spi0_device);
- }
- if (enable_spi1) {
- at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */
- at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */
- at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */
-
- platform_device_register(&at91cap9_spi1_device);
- }
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Timer/Counter block
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_ATMEL_TCLIB
-
-static struct resource tcb_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_TCB0,
- .end = AT91CAP9_BASE_TCB0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_TCB,
- .end = AT91CAP9_ID_TCB,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_tcb_device = {
- .name = "atmel_tcb",
- .id = 0,
- .resource = tcb_resources,
- .num_resources = ARRAY_SIZE(tcb_resources),
-};
-
-static void __init at91_add_device_tc(void)
-{
- platform_device_register(&at91cap9_tcb_device);
-}
-#else
-static void __init at91_add_device_tc(void) { }
-#endif
-
-
-/* --------------------------------------------------------------------
- * RTT
- * -------------------------------------------------------------------- */
-
-static struct resource rtt_resources[] = {
- {
- .start = AT91CAP9_BASE_RTT,
- .end = AT91CAP9_BASE_RTT + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device at91cap9_rtt_device = {
- .name = "at91_rtt",
- .id = 0,
- .resource = rtt_resources,
- .num_resources = ARRAY_SIZE(rtt_resources),
-};
-
-static void __init at91_add_device_rtt(void)
-{
- platform_device_register(&at91cap9_rtt_device);
-}
-
-
-/* --------------------------------------------------------------------
- * Watchdog
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
-static struct resource wdt_resources[] = {
- {
- .start = AT91CAP9_BASE_WDT,
- .end = AT91CAP9_BASE_WDT + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device at91cap9_wdt_device = {
- .name = "at91_wdt",
- .id = -1,
- .resource = wdt_resources,
- .num_resources = ARRAY_SIZE(wdt_resources),
-};
-
-static void __init at91_add_device_watchdog(void)
-{
- platform_device_register(&at91cap9_wdt_device);
-}
-#else
-static void __init at91_add_device_watchdog(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * PWM
- * --------------------------------------------------------------------*/
-
-#if defined(CONFIG_ATMEL_PWM)
-static u32 pwm_mask;
-
-static struct resource pwm_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_PWMC,
- .end = AT91CAP9_BASE_PWMC + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_PWMC,
- .end = AT91CAP9_ID_PWMC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_pwm0_device = {
- .name = "atmel_pwm",
- .id = -1,
- .dev = {
- .platform_data = &pwm_mask,
- },
- .resource = pwm_resources,
- .num_resources = ARRAY_SIZE(pwm_resources),
-};
-
-void __init at91_add_device_pwm(u32 mask)
-{
- if (mask & (1 << AT91_PWM0))
- at91_set_A_periph(AT91_PIN_PB19, 1); /* enable PWM0 */
-
- if (mask & (1 << AT91_PWM1))
- at91_set_B_periph(AT91_PIN_PB8, 1); /* enable PWM1 */
-
- if (mask & (1 << AT91_PWM2))
- at91_set_B_periph(AT91_PIN_PC29, 1); /* enable PWM2 */
-
- if (mask & (1 << AT91_PWM3))
- at91_set_B_periph(AT91_PIN_PA11, 1); /* enable PWM3 */
-
- pwm_mask = mask;
-
- platform_device_register(&at91cap9_pwm0_device);
-}
-#else
-void __init at91_add_device_pwm(u32 mask) {}
-#endif
-
-
-
-/* --------------------------------------------------------------------
- * AC97
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
-static u64 ac97_dmamask = DMA_BIT_MASK(32);
-static struct ac97c_platform_data ac97_data;
-
-static struct resource ac97_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_AC97C,
- .end = AT91CAP9_BASE_AC97C + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_AC97C,
- .end = AT91CAP9_ID_AC97C,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_ac97_device = {
- .name = "atmel_ac97c",
- .id = 1,
- .dev = {
- .dma_mask = &ac97_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &ac97_data,
- },
- .resource = ac97_resources,
- .num_resources = ARRAY_SIZE(ac97_resources),
-};
-
-void __init at91_add_device_ac97(struct ac97c_platform_data *data)
-{
- if (!data)
- return;
-
- at91_set_A_periph(AT91_PIN_PA6, 0); /* AC97FS */
- at91_set_A_periph(AT91_PIN_PA7, 0); /* AC97CK */
- at91_set_A_periph(AT91_PIN_PA8, 0); /* AC97TX */
- at91_set_A_periph(AT91_PIN_PA9, 0); /* AC97RX */
-
- /* reset */
- if (gpio_is_valid(data->reset_pin))
- at91_set_gpio_output(data->reset_pin, 0);
-
- ac97_data = *data;
- platform_device_register(&at91cap9_ac97_device);
-}
-#else
-void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * LCD Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static u64 lcdc_dmamask = DMA_BIT_MASK(32);
-static struct atmel_lcdfb_info lcdc_data;
-
-static struct resource lcdc_resources[] = {
- [0] = {
- .start = AT91CAP9_LCDC_BASE,
- .end = AT91CAP9_LCDC_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_LCDC,
- .end = AT91CAP9_ID_LCDC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91_lcdc_device = {
- .name = "atmel_lcdfb",
- .id = 0,
- .dev = {
- .dma_mask = &lcdc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &lcdc_data,
- },
- .resource = lcdc_resources,
- .num_resources = ARRAY_SIZE(lcdc_resources),
-};
-
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
-{
- if (!data)
- return;
-
- if (cpu_is_at91cap9_revB())
- irq_set_irq_type(AT91CAP9_ID_LCDC, IRQ_TYPE_LEVEL_HIGH);
-
- at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
- at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
- at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
- at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
- at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
- at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
- at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
- at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
- at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
- at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
- at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
- at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
- at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
- at91_set_A_periph(AT91_PIN_PC17, 0); /* LCDD13 */
- at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
- at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
- at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
- at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
- at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
- at91_set_A_periph(AT91_PIN_PC25, 0); /* LCDD21 */
- at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
- at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
-
- lcdc_data = *data;
- platform_device_register(&at91_lcdc_device);
-}
-#else
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * SSC -- Synchronous Serial Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
-static u64 ssc0_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc0_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_SSC0,
- .end = AT91CAP9_BASE_SSC0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_SSC0,
- .end = AT91CAP9_ID_SSC0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_ssc0_device = {
- .name = "ssc",
- .id = 0,
- .dev = {
- .dma_mask = &ssc0_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = ssc0_resources,
- .num_resources = ARRAY_SIZE(ssc0_resources),
-};
-
-static inline void configure_ssc0_pins(unsigned pins)
-{
- if (pins & ATMEL_SSC_TF)
- at91_set_A_periph(AT91_PIN_PB0, 1);
- if (pins & ATMEL_SSC_TK)
- at91_set_A_periph(AT91_PIN_PB1, 1);
- if (pins & ATMEL_SSC_TD)
- at91_set_A_periph(AT91_PIN_PB2, 1);
- if (pins & ATMEL_SSC_RD)
- at91_set_A_periph(AT91_PIN_PB3, 1);
- if (pins & ATMEL_SSC_RK)
- at91_set_A_periph(AT91_PIN_PB4, 1);
- if (pins & ATMEL_SSC_RF)
- at91_set_A_periph(AT91_PIN_PB5, 1);
-}
-
-static u64 ssc1_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc1_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_SSC1,
- .end = AT91CAP9_BASE_SSC1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_SSC1,
- .end = AT91CAP9_ID_SSC1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_ssc1_device = {
- .name = "ssc",
- .id = 1,
- .dev = {
- .dma_mask = &ssc1_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = ssc1_resources,
- .num_resources = ARRAY_SIZE(ssc1_resources),
-};
-
-static inline void configure_ssc1_pins(unsigned pins)
-{
- if (pins & ATMEL_SSC_TF)
- at91_set_A_periph(AT91_PIN_PB6, 1);
- if (pins & ATMEL_SSC_TK)
- at91_set_A_periph(AT91_PIN_PB7, 1);
- if (pins & ATMEL_SSC_TD)
- at91_set_A_periph(AT91_PIN_PB8, 1);
- if (pins & ATMEL_SSC_RD)
- at91_set_A_periph(AT91_PIN_PB9, 1);
- if (pins & ATMEL_SSC_RK)
- at91_set_A_periph(AT91_PIN_PB10, 1);
- if (pins & ATMEL_SSC_RF)
- at91_set_A_periph(AT91_PIN_PB11, 1);
-}
-
-/*
- * SSC controllers are accessed through library code, instead of any
- * kind of all-singing/all-dancing driver. For example one could be
- * used by a particular I2S audio codec's driver, while another one
- * on the same system might be used by a custom data capture driver.
- */
-void __init at91_add_device_ssc(unsigned id, unsigned pins)
-{
- struct platform_device *pdev;
-
- /*
- * NOTE: caller is responsible for passing information matching
- * "pins" to whatever will be using each particular controller.
- */
- switch (id) {
- case AT91CAP9_ID_SSC0:
- pdev = &at91cap9_ssc0_device;
- configure_ssc0_pins(pins);
- break;
- case AT91CAP9_ID_SSC1:
- pdev = &at91cap9_ssc1_device;
- configure_ssc1_pins(pins);
- break;
- default:
- return;
- }
-
- platform_device_register(pdev);
-}
-
-#else
-void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * UART
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_DBGU,
- .end = AT91CAP9_BASE_DBGU + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91_ID_SYS,
- .end = AT91_ID_SYS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data dbgu_data = {
- .use_dma_tx = 0,
- .use_dma_rx = 0, /* DBGU not capable of receive DMA */
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91cap9_dbgu_device = {
- .name = "atmel_usart",
- .id = 0,
- .dev = {
- .dma_mask = &dbgu_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &dbgu_data,
- },
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
-}
-
-static struct resource uart0_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_US0,
- .end = AT91CAP9_BASE_US0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_US0,
- .end = AT91CAP9_ID_US0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart0_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91cap9_uart0_device = {
- .name = "atmel_usart",
- .id = 1,
- .dev = {
- .dma_mask = &uart0_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart0_data,
- },
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PA24, 0); /* RTS0 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PA25, 0); /* CTS0 */
-}
-
-static struct resource uart1_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_US1,
- .end = AT91CAP9_BASE_US1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_US1,
- .end = AT91CAP9_ID_US1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart1_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91cap9_uart1_device = {
- .name = "atmel_usart",
- .id = 2,
- .dev = {
- .dma_mask = &uart1_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart1_data,
- },
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_US2,
- .end = AT91CAP9_BASE_US2 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_US2,
- .end = AT91CAP9_ID_US2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart2_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91cap9_uart2_device = {
- .name = "atmel_usart",
- .id = 3,
- .dev = {
- .dma_mask = &uart2_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart2_data,
- },
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-struct platform_device *atmel_default_console_device; /* the serial console device */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
- struct platform_device *pdev;
- struct atmel_uart_data *pdata;
-
- switch (id) {
- case 0: /* DBGU */
- pdev = &at91cap9_dbgu_device;
- configure_dbgu_pins();
- break;
- case AT91CAP9_ID_US0:
- pdev = &at91cap9_uart0_device;
- configure_usart0_pins(pins);
- break;
- case AT91CAP9_ID_US1:
- pdev = &at91cap9_uart1_device;
- configure_usart1_pins(pins);
- break;
- case AT91CAP9_ID_US2:
- pdev = &at91cap9_uart2_device;
- configure_usart2_pins(pins);
- break;
- default:
- return;
- }
- pdata = pdev->dev.platform_data;
- pdata->num = portnr; /* update to mapped ID */
-
- if (portnr < ATMEL_MAX_UART)
- at91_uarts[portnr] = pdev;
-}
-
-void __init at91_set_serial_console(unsigned portnr)
-{
- if (portnr < ATMEL_MAX_UART) {
- atmel_default_console_device = at91_uarts[portnr];
- at91cap9_set_console_clock(at91_uarts[portnr]->id);
- }
-}
-
-void __init at91_add_device_serial(void)
-{
- int i;
-
- for (i = 0; i < ATMEL_MAX_UART; i++) {
- if (at91_uarts[i])
- platform_device_register(at91_uarts[i]);
- }
-
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-
-/* -------------------------------------------------------------------- */
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init at91_add_standard_devices(void)
-{
- at91_add_device_rtt();
- at91_add_device_watchdog();
- at91_add_device_tc();
- return 0;
-}
-
-arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 99c3174..dd6e2de 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -289,6 +289,15 @@
}
};
+static void at91rm9200_idle(void)
+{
+ /*
+ * Disable the processor clock. The processor will be automatically
+ * re-enabled by an interrupt or by a reset.
+ */
+ at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+}
+
static void at91rm9200_restart(char mode, const char *cmd)
{
/*
@@ -314,6 +323,7 @@
static void __init at91rm9200_initialize(void)
{
+ arm_pm_idle = at91rm9200_idle;
arm_pm_restart = at91rm9200_restart;
at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
| (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index d4036ba..9ac8c6f 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
+#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -328,8 +329,15 @@
at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC);
}
+static void at91sam9260_idle(void)
+{
+ at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+ cpu_do_idle();
+}
+
static void __init at91sam9260_initialize(void)
{
+ arm_pm_idle = at91sam9260_idle;
arm_pm_restart = at91sam9_alt_restart;
at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
| (1 << AT91SAM9260_ID_IRQ2);
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 023c2ff..ab76868 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
+#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -286,8 +287,15 @@
at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC);
}
+static void at91sam9261_idle(void)
+{
+ at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+ cpu_do_idle();
+}
+
static void __init at91sam9261_initialize(void)
{
+ arm_pm_idle = at91sam9261_idle;
arm_pm_restart = at91sam9_alt_restart;
at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
| (1 << AT91SAM9261_ID_IRQ2);
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 75e876c..247ab63 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
+#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -307,8 +308,15 @@
at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1);
}
+static void at91sam9263_idle(void)
+{
+ at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+ cpu_do_idle();
+}
+
static void __init at91sam9263_initialize(void)
{
+ arm_pm_idle = at91sam9263_idle;
arm_pm_restart = at91sam9_alt_restart;
at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 366a776..70709ab 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -891,7 +891,8 @@
.num_resources = ARRAY_SIZE(isi_resources),
};
-void __init at91_add_device_isi(void)
+void __init at91_add_device_isi(struct isi_platform_data *data,
+ bool use_pck_as_mck)
{
at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */
at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */
@@ -904,14 +905,20 @@
at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */
at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */
at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */
- at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */
at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */
at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */
at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */
at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */
+
+ if (use_pck_as_mck) {
+ at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */
+
+ /* TODO: register the PCK for ISI_MCK and set its parent */
+ }
}
#else
-void __init at91_add_device_isi(void) {}
+void __init at91_add_device_isi(struct isi_platform_data *data,
+ bool use_pck_as_mck) {}
#endif
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 1cb6a96..5b12192 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -317,6 +317,12 @@
}
};
+static void at91sam9g45_idle(void)
+{
+ at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+ cpu_do_idle();
+}
+
/* --------------------------------------------------------------------
* AT91SAM9G45 processor initialization
* -------------------------------------------------------------------- */
@@ -337,6 +343,7 @@
static void __init at91sam9g45_initialize(void)
{
+ arm_pm_idle = at91sam9g45_idle;
arm_pm_restart = at91sam9g45_restart;
at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index b7582dd..bd4e68c 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -14,6 +14,7 @@
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
+#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
#include <linux/atmel-mci.h>
@@ -28,7 +29,10 @@
#include <mach/at_hdmac.h>
#include <mach/atmel-mci.h>
+#include <media/atmel-isi.h>
+
#include "generic.h"
+#include "clock.h"
/* --------------------------------------------------------------------
@@ -38,10 +42,6 @@
#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
static u64 hdmac_dmamask = DMA_BIT_MASK(32);
-static struct at_dma_platform_data atdma_pdata = {
- .nr_channels = 8,
-};
-
static struct resource hdmac_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_DMA,
@@ -56,12 +56,11 @@
};
static struct platform_device at_hdmac_device = {
- .name = "at_hdmac",
+ .name = "at91sam9g45_dma",
.id = -1,
.dev = {
.dma_mask = &hdmac_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &atdma_pdata,
},
.resource = hdmac_resources,
.num_resources = ARRAY_SIZE(hdmac_resources),
@@ -69,9 +68,15 @@
void __init at91_add_device_hdmac(void)
{
- dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
- dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask);
- platform_device_register(&at_hdmac_device);
+#if defined(CONFIG_OF)
+ struct device_node *of_node =
+ of_find_node_by_name(NULL, "dma-controller");
+
+ if (of_node)
+ of_node_put(of_node);
+ else
+#endif
+ platform_device_register(&at_hdmac_device);
}
#else
void __init at91_add_device_hdmac(void) {}
@@ -869,6 +874,96 @@
void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
#endif
+/* --------------------------------------------------------------------
+ * Image Sensor Interface
+ * -------------------------------------------------------------------- */
+#if defined(CONFIG_VIDEO_ATMEL_ISI) || defined(CONFIG_VIDEO_ATMEL_ISI_MODULE)
+static u64 isi_dmamask = DMA_BIT_MASK(32);
+static struct isi_platform_data isi_data;
+
+struct resource isi_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_ISI,
+ .end = AT91SAM9G45_BASE_ISI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_ISI,
+ .end = AT91SAM9G45_ID_ISI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_isi_device = {
+ .name = "atmel_isi",
+ .id = 0,
+ .dev = {
+ .dma_mask = &isi_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &isi_data,
+ },
+ .resource = isi_resources,
+ .num_resources = ARRAY_SIZE(isi_resources),
+};
+
+static struct clk_lookup isi_mck_lookups[] = {
+ CLKDEV_CON_DEV_ID("isi_mck", "atmel_isi.0", NULL),
+};
+
+void __init at91_add_device_isi(struct isi_platform_data *data,
+ bool use_pck_as_mck)
+{
+ struct clk *pck;
+ struct clk *parent;
+
+ if (!data)
+ return;
+ isi_data = *data;
+
+ at91_set_A_periph(AT91_PIN_PB20, 0); /* ISI_D0 */
+ at91_set_A_periph(AT91_PIN_PB21, 0); /* ISI_D1 */
+ at91_set_A_periph(AT91_PIN_PB22, 0); /* ISI_D2 */
+ at91_set_A_periph(AT91_PIN_PB23, 0); /* ISI_D3 */
+ at91_set_A_periph(AT91_PIN_PB24, 0); /* ISI_D4 */
+ at91_set_A_periph(AT91_PIN_PB25, 0); /* ISI_D5 */
+ at91_set_A_periph(AT91_PIN_PB26, 0); /* ISI_D6 */
+ at91_set_A_periph(AT91_PIN_PB27, 0); /* ISI_D7 */
+ at91_set_A_periph(AT91_PIN_PB28, 0); /* ISI_PCK */
+ at91_set_A_periph(AT91_PIN_PB30, 0); /* ISI_HSYNC */
+ at91_set_A_periph(AT91_PIN_PB29, 0); /* ISI_VSYNC */
+ at91_set_B_periph(AT91_PIN_PB8, 0); /* ISI_PD8 */
+ at91_set_B_periph(AT91_PIN_PB9, 0); /* ISI_PD9 */
+ at91_set_B_periph(AT91_PIN_PB10, 0); /* ISI_PD10 */
+ at91_set_B_periph(AT91_PIN_PB11, 0); /* ISI_PD11 */
+
+ platform_device_register(&at91sam9g45_isi_device);
+
+ if (use_pck_as_mck) {
+ at91_set_B_periph(AT91_PIN_PB31, 0); /* ISI_MCK (PCK1) */
+
+ pck = clk_get(NULL, "pck1");
+ parent = clk_get(NULL, "plla");
+
+ BUG_ON(IS_ERR(pck) || IS_ERR(parent));
+
+ if (clk_set_parent(pck, parent)) {
+ pr_err("Failed to set PCK's parent\n");
+ } else {
+ /* Register PCK as ISI_MCK */
+ isi_mck_lookups[0].clk = pck;
+ clkdev_add_table(isi_mck_lookups,
+ ARRAY_SIZE(isi_mck_lookups));
+ }
+
+ clk_put(pck);
+ clk_put(parent);
+ }
+}
+#else
+void __init at91_add_device_isi(struct isi_platform_data *data,
+ bool use_pck_as_mck) {}
+#endif
+
/* --------------------------------------------------------------------
* LCD Controller
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index d2c91a8..fd60e22 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -11,6 +11,7 @@
#include <linux/module.h>
+#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -291,8 +292,15 @@
at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC);
}
+static void at91sam9rl_idle(void)
+{
+ at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+ cpu_do_idle();
+}
+
static void __init at91sam9rl_initialize(void)
{
+ arm_pm_idle = at91sam9rl_idle;
arm_pm_restart = at91sam9_alt_restart;
at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 61908dc..9be71c1 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -33,10 +33,6 @@
#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
static u64 hdmac_dmamask = DMA_BIT_MASK(32);
-static struct at_dma_platform_data atdma_pdata = {
- .nr_channels = 2,
-};
-
static struct resource hdmac_resources[] = {
[0] = {
.start = AT91SAM9RL_BASE_DMA,
@@ -51,12 +47,11 @@
};
static struct platform_device at_hdmac_device = {
- .name = "at_hdmac",
+ .name = "at91sam9rl_dma",
.id = -1,
.dev = {
.dma_mask = &hdmac_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &atdma_pdata,
},
.resource = hdmac_resources,
.num_resources = ARRAY_SIZE(hdmac_resources),
@@ -64,7 +59,6 @@
void __init at91_add_device_hdmac(void)
{
- dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
platform_device_register(&at_hdmac_device);
}
#else
diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c
index 56ba3bd..0154b7f 100644
--- a/arch/arm/mach-at91/at91x40.c
+++ b/arch/arm/mach-at91/at91x40.c
@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
+#include <asm/proc-fns.h>
#include <asm/mach/arch.h>
#include <mach/at91x40.h>
#include <mach/at91_st.h>
@@ -37,8 +38,19 @@
return AT91X40_MASTER_CLOCK;
}
+static void at91x40_idle(void)
+{
+ /*
+ * Disable the processor clock. The processor will be automatically
+ * re-enabled by an interrupt or by a reset.
+ */
+ at91_sys_write(AT91_PS_CR, AT91_PS_CR_CPU);
+ cpu_do_idle();
+}
+
void __init at91x40_initialize(unsigned long main_clock)
{
+ arm_pm_idle = at91x40_idle;
at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1)
| (1 << AT91X40_ID_IRQ2);
}
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
deleted file mode 100644
index ac3de4f..0000000
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ /dev/null
@@ -1,396 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-cap9adk.c
- *
- * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2007 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/fb.h>
-#include <linux/mtd/physmap.h>
-
-#include <video/atmel_lcdc.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/board.h>
-#include <mach/at91cap9_matrix.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/system_rev.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init cap9adk_init_early(void)
-{
- /* Initialize processor: 12 MHz crystal */
- at91_initialize(12000000);
-
- /* Setup the LEDs: USER1 and USER2 LED for cpu/timer... */
- at91_init_leds(AT91_PIN_PA10, AT91_PIN_PA11);
- /* ... POWER LED always on */
- at91_set_gpio_output(AT91_PIN_PC29, 1);
-
- /* Setup the serial ports and console */
- at91_register_uart(0, 0, 0); /* DBGU = ttyS0 */
- at91_set_serial_console(0);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata cap9adk_usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB HS Device port
- */
-static struct usba_platform_data __initdata cap9adk_usba_udc_data = {
- .vbus_pin = AT91_PIN_PB31,
-};
-
-/*
- * ADS7846 Touchscreen
- */
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-static int ads7843_pendown_state(void)
-{
- return !at91_get_gpio_value(AT91_PIN_PC4); /* Touchscreen PENIRQ */
-}
-
-static struct ads7846_platform_data ads_info = {
- .model = 7843,
- .x_min = 150,
- .x_max = 3830,
- .y_min = 190,
- .y_max = 3830,
- .vref_delay_usecs = 100,
- .x_plate_ohms = 450,
- .y_plate_ohms = 250,
- .pressure_max = 15000,
- .debounce_max = 1,
- .debounce_rep = 0,
- .debounce_tol = (~0),
- .get_pendown_state = ads7843_pendown_state,
-};
-
-static void __init cap9adk_add_device_ts(void)
-{
- at91_set_gpio_input(AT91_PIN_PC4, 1); /* Touchscreen PENIRQ */
- at91_set_gpio_input(AT91_PIN_PC5, 1); /* Touchscreen BUSY */
-}
-#else
-static void __init cap9adk_add_device_ts(void) {}
-#endif
-
-
-/*
- * SPI devices.
- */
-static struct spi_board_info cap9adk_spi_devices[] = {
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
- { /* DataFlash card */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-#endif
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
- {
- .modalias = "ads7846",
- .chip_select = 3, /* can be 2 or 3, depending on J2 jumper */
- .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */
- .bus_num = 0,
- .platform_data = &ads_info,
- .irq = AT91_PIN_PC4,
- },
-#endif
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct at91_mmc_data __initdata cap9adk_mmc_data = {
- .wire4 = 1,
- .det_pin = -EINVAL,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata cap9adk_macb_data = {
- .phy_irq_pin = -EINVAL,
- .is_rmii = 1,
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata cap9adk_nand_partitions[] = {
- {
- .name = "NAND partition",
- .offset = 0,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct atmel_nand_data __initdata cap9adk_nand_data = {
- .ale = 21,
- .cle = 22,
- .det_pin = -EINVAL,
- .rdy_pin = -EINVAL,
- .enable_pin = AT91_PIN_PD15,
- .parts = cap9adk_nand_partitions,
- .num_parts = ARRAY_SIZE(cap9adk_nand_partitions),
-};
-
-static struct sam9_smc_config __initdata cap9adk_nand_smc_config = {
- .ncs_read_setup = 1,
- .nrd_setup = 2,
- .ncs_write_setup = 1,
- .nwe_setup = 2,
-
- .ncs_read_pulse = 6,
- .nrd_pulse = 4,
- .ncs_write_pulse = 6,
- .nwe_pulse = 4,
-
- .read_cycle = 8,
- .write_cycle = 8,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
- .tdf_cycles = 1,
-};
-
-static void __init cap9adk_add_device_nand(void)
-{
- unsigned long csa;
-
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
-
- cap9adk_nand_data.bus_width_16 = board_have_nand_16bit();
- /* setup bus-width (8 or 16) */
- if (cap9adk_nand_data.bus_width_16)
- cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_16;
- else
- cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_8;
-
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(0, 3, &cap9adk_nand_smc_config);
-
- at91_add_device_nand(&cap9adk_nand_data);
-}
-
-
-/*
- * NOR flash
- */
-static struct mtd_partition cap9adk_nor_partitions[] = {
- {
- .name = "NOR partition",
- .offset = 0,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data cap9adk_nor_data = {
- .width = 2,
- .parts = cap9adk_nor_partitions,
- .nr_parts = ARRAY_SIZE(cap9adk_nor_partitions),
-};
-
-#define NOR_BASE AT91_CHIPSELECT_0
-#define NOR_SIZE SZ_8M
-
-static struct resource nor_flash_resources[] = {
- {
- .start = NOR_BASE,
- .end = NOR_BASE + NOR_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device cap9adk_nor_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &cap9adk_nor_data,
- },
- .resource = nor_flash_resources,
- .num_resources = ARRAY_SIZE(nor_flash_resources),
-};
-
-static struct sam9_smc_config __initdata cap9adk_nor_smc_config = {
- .ncs_read_setup = 2,
- .nrd_setup = 4,
- .ncs_write_setup = 2,
- .nwe_setup = 4,
-
- .ncs_read_pulse = 10,
- .nrd_pulse = 8,
- .ncs_write_pulse = 10,
- .nwe_pulse = 8,
-
- .read_cycle = 16,
- .write_cycle = 16,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16,
- .tdf_cycles = 1,
-};
-
-static __init void cap9adk_add_device_nor(void)
-{
- unsigned long csa;
-
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
-
- /* configure chip-select 0 (NOR) */
- sam9_smc_configure(0, 0, &cap9adk_nor_smc_config);
-
- platform_device_register(&cap9adk_nor_flash);
-}
-
-
-/*
- * LCD Controller
- */
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static struct fb_videomode at91_tft_vga_modes[] = {
- {
- .name = "TX09D50VM1CCA @ 60",
- .refresh = 60,
- .xres = 240, .yres = 320,
- .pixclock = KHZ2PICOS(4965),
-
- .left_margin = 1, .right_margin = 33,
- .upper_margin = 1, .lower_margin = 0,
- .hsync_len = 5, .vsync_len = 1,
-
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- .vmode = FB_VMODE_NONINTERLACED,
- },
-};
-
-static struct fb_monspecs at91fb_default_monspecs = {
- .manufacturer = "HIT",
- .monitor = "TX09D70VM1CCA",
-
- .modedb = at91_tft_vga_modes,
- .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
- .hfmin = 15000,
- .hfmax = 64000,
- .vfmin = 50,
- .vfmax = 150,
-};
-
-#define AT91CAP9_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
- | ATMEL_LCDC_DISTYPE_TFT \
- | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-
-static void at91_lcdc_power_control(int on)
-{
- if (on)
- at91_set_gpio_value(AT91_PIN_PC0, 0); /* power up */
- else
- at91_set_gpio_value(AT91_PIN_PC0, 1); /* power down */
-}
-
-/* Driver datas */
-static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data = {
- .default_bpp = 16,
- .default_dmacon = ATMEL_LCDC_DMAEN,
- .default_lcdcon2 = AT91CAP9_DEFAULT_LCDCON2,
- .default_monspecs = &at91fb_default_monspecs,
- .atmel_lcdfb_power_control = at91_lcdc_power_control,
- .guard_time = 1,
-};
-
-#else
-static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data;
-#endif
-
-
-/*
- * AC97
- */
-static struct ac97c_platform_data cap9adk_ac97_data = {
- .reset_pin = -EINVAL,
-};
-
-
-static void __init cap9adk_board_init(void)
-{
- /* Serial */
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&cap9adk_usbh_data);
- /* USB HS */
- at91_add_device_usba(&cap9adk_usba_udc_data);
- /* SPI */
- at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices));
- /* Touchscreen */
- cap9adk_add_device_ts();
- /* MMC */
- at91_add_device_mmc(1, &cap9adk_mmc_data);
- /* Ethernet */
- at91_add_device_eth(&cap9adk_macb_data);
- /* NAND */
- cap9adk_add_device_nand();
- /* NOR Flash */
- cap9adk_add_device_nor();
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* LCD Controller */
- at91_add_device_lcdc(&cap9adk_lcdc_data);
- /* AC97 */
- at91_add_device_ac97(&cap9adk_ac97_data);
-}
-
-MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK")
- /* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */
- .timer = &at91sam926x_timer,
- .map_io = at91_map_io,
- .init_early = cap9adk_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = cap9adk_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index eec02cd..1815152 100644
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -1,7 +1,7 @@
/*
* linux/arch/arm/mach-at91/board-flexibity.c
*
- * Copyright (C) 2010 Flexibity
+ * Copyright (C) 2010-2011 Flexibity
* Copyright (C) 2005 SAN People
* Copyright (C) 2006 Atmel
*
@@ -62,6 +62,13 @@
.pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
+/* I2C devices */
+static struct i2c_board_info __initdata flexibity_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("ds1307", 0x68),
+ },
+};
+
/* SPI devices */
static struct spi_board_info flexibity_spi_devices[] = {
{ /* DataFlash chip */
@@ -141,6 +148,9 @@
at91_add_device_usbh(&flexibity_usbh_data);
/* USB Device */
at91_add_device_udc(&flexibity_udc_data);
+ /* I2C */
+ at91_add_device_i2c(flexibity_i2c_devices,
+ ARRAY_SIZE(flexibity_i2c_devices));
/* SPI */
at91_add_device_spi(flexibity_spi_devices,
ARRAY_SIZE(flexibity_spi_devices));
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index ea0d1b9..57497e2 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -24,11 +24,13 @@
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/leds.h>
-#include <linux/clk.h>
#include <linux/atmel-mci.h>
+#include <linux/delay.h>
#include <mach/hardware.h>
#include <video/atmel_lcdc.h>
+#include <media/soc_camera.h>
+#include <media/atmel-isi.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -185,6 +187,71 @@
/*
+ * ISI
+ */
+static struct isi_platform_data __initdata isi_data = {
+ .frate = ISI_CFG1_FRATE_CAPTURE_ALL,
+ /* to use codec and preview path simultaneously */
+ .full_mode = 1,
+ .data_width_flags = ISI_DATAWIDTH_8 | ISI_DATAWIDTH_10,
+ /* ISI_MCK is provided by programmable clock or external clock */
+ .mck_hz = 25000000,
+};
+
+
+/*
+ * soc-camera OV2640
+ */
+#if defined(CONFIG_SOC_CAMERA_OV2640) || \
+ defined(CONFIG_SOC_CAMERA_OV2640_MODULE)
+static unsigned long isi_camera_query_bus_param(struct soc_camera_link *link)
+{
+ /* ISI board for ek using default 8-bits connection */
+ return SOCAM_DATAWIDTH_8;
+}
+
+static int i2c_camera_power(struct device *dev, int on)
+{
+ /* enable or disable the camera */
+ pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE");
+ at91_set_gpio_output(AT91_PIN_PD13, !on);
+
+ if (!on)
+ goto out;
+
+ /* If enabled, give a reset impulse */
+ at91_set_gpio_output(AT91_PIN_PD12, 0);
+ msleep(20);
+ at91_set_gpio_output(AT91_PIN_PD12, 1);
+ msleep(100);
+
+out:
+ return 0;
+}
+
+static struct i2c_board_info i2c_camera = {
+ I2C_BOARD_INFO("ov2640", 0x30),
+};
+
+static struct soc_camera_link iclink_ov2640 = {
+ .bus_id = 0,
+ .board_info = &i2c_camera,
+ .i2c_adapter_id = 0,
+ .power = i2c_camera_power,
+ .query_bus_param = isi_camera_query_bus_param,
+};
+
+static struct platform_device isi_ov2640 = {
+ .name = "soc-camera-pdrv",
+ .id = 0,
+ .dev = {
+ .platform_data = &iclink_ov2640,
+ },
+};
+#endif
+
+
+/*
* LCD Controller
*/
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
@@ -377,7 +444,12 @@
#endif
};
-
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_SOC_CAMERA_OV2640) || \
+ defined(CONFIG_SOC_CAMERA_OV2640_MODULE)
+ &isi_ov2640,
+#endif
+};
static void __init ek_board_init(void)
{
@@ -399,6 +471,8 @@
ek_add_device_nand();
/* I2C */
at91_add_device_i2c(0, NULL, 0);
+ /* ISI, using programmable clock as ISI_MCK */
+ at91_add_device_isi(&isi_data, true);
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
/* Touch Screen */
@@ -410,6 +484,8 @@
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
+ /* Other platform devices */
+ platform_add_devices(devices, ARRAY_SIZE(devices));
}
MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 61873f3..aa04e22 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -47,8 +47,7 @@
/*
* Chips have some kind of clocks : group them by functionality
*/
-#define cpu_has_utmi() ( cpu_is_at91cap9() \
- || cpu_is_at91sam9rl() \
+#define cpu_has_utmi() ( cpu_is_at91sam9rl() \
|| cpu_is_at91sam9g45())
#define cpu_has_800M_plla() ( cpu_is_at91sam9g20() \
@@ -602,8 +601,6 @@
cpu_is_at91sam9g10()) {
uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
udpck.pmc_mask = AT91SAM926x_PMC_UDP;
- } else if (cpu_is_at91cap9()) {
- uhpck.pmc_mask = AT91CAP9_PMC_UHP;
}
at91_sys_write(AT91_CKGR_PLLBR, 0);
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 5941334..7e8280e 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -45,7 +45,6 @@
extern void __init at91sam9263_set_console_clock(int id);
extern void __init at91sam9rl_set_console_clock(int id);
extern void __init at91sam9g45_set_console_clock(int id);
-extern void __init at91cap9_set_console_clock(int id);
#ifdef CONFIG_AT91_PMC_UNIT
extern int __init at91_clock_init(unsigned long main_clock);
#else
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index e46f93e..dbdd6ae 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -23,10 +23,8 @@
#define AT91_PMC_PCK (1 << 0) /* Processor Clock */
#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */
#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
-#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [CAP9 revC & some SAM9 only] */
#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */
#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */
-#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */
#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */
#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */
#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */
@@ -40,7 +38,7 @@
#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
-#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [some SAM9, CAP9] */
+#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [some SAM9] */
#define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */
#define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */
#define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */
@@ -48,7 +46,7 @@
#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */
#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
-#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x, CAP9] */
+#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x] */
#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */
@@ -87,7 +85,7 @@
#define AT91RM9200_PMC_MDIV_2 (1 << 8)
#define AT91RM9200_PMC_MDIV_3 (2 << 8)
#define AT91RM9200_PMC_MDIV_4 (3 << 8)
-#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */
+#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9 only] */
#define AT91SAM9_PMC_MDIV_2 (1 << 8)
#define AT91SAM9_PMC_MDIV_4 (2 << 8)
#define AT91SAM9_PMC_MDIV_6 (3 << 8) /* [some SAM9 only] */
@@ -117,17 +115,15 @@
#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */
#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */
-#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9, AT91CAP9 only] */
-#define AT91_PMC_OSCSEL (1 << 7) /* Slow Clock Oscillator [AT91CAP9 revC only] */
+#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9] */
#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */
#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */
#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */
#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */
-#define AT91_PMC_PROT (AT91_PMC + 0xe4) /* Protect Register [AT91CAP9 revC only] */
+#define AT91_PMC_PROT (AT91_PMC + 0xe4) /* Write Protect Mode Register [some SAM9] */
#define AT91_PMC_PROTKEY 0x504d4301 /* Activation Code */
-#define AT91_PMC_VER (AT91_PMC + 0xfc) /* PMC Module Version [AT91CAP9 only] */
#endif
diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h
deleted file mode 100644
index 61d9529..0000000
--- a/arch/arm/mach-at91/include/mach/at91cap9.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91cap9.h
- *
- * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- * Copyright (C) 2007 Atmel Corporation.
- *
- * Common definitions.
- * Based on AT91CAP9 datasheet revision B (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91CAP9_H
-#define AT91CAP9_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */
-#define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */
-#define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */
-#define AT91CAP9_ID_MPB2 5 /* MP Block Peripheral 2 */
-#define AT91CAP9_ID_MPB3 6 /* MP Block Peripheral 3 */
-#define AT91CAP9_ID_MPB4 7 /* MP Block Peripheral 4 */
-#define AT91CAP9_ID_US0 8 /* USART 0 */
-#define AT91CAP9_ID_US1 9 /* USART 1 */
-#define AT91CAP9_ID_US2 10 /* USART 2 */
-#define AT91CAP9_ID_MCI0 11 /* Multimedia Card Interface 0 */
-#define AT91CAP9_ID_MCI1 12 /* Multimedia Card Interface 1 */
-#define AT91CAP9_ID_CAN 13 /* CAN */
-#define AT91CAP9_ID_TWI 14 /* Two-Wire Interface */
-#define AT91CAP9_ID_SPI0 15 /* Serial Peripheral Interface 0 */
-#define AT91CAP9_ID_SPI1 16 /* Serial Peripheral Interface 0 */
-#define AT91CAP9_ID_SSC0 17 /* Serial Synchronous Controller 0 */
-#define AT91CAP9_ID_SSC1 18 /* Serial Synchronous Controller 1 */
-#define AT91CAP9_ID_AC97C 19 /* AC97 Controller */
-#define AT91CAP9_ID_TCB 20 /* Timer Counter 0, 1 and 2 */
-#define AT91CAP9_ID_PWMC 21 /* Pulse Width Modulation Controller */
-#define AT91CAP9_ID_EMAC 22 /* Ethernet */
-#define AT91CAP9_ID_AESTDES 23 /* Advanced Encryption Standard, Triple DES */
-#define AT91CAP9_ID_ADC 24 /* Analog-to-Digital Converter */
-#define AT91CAP9_ID_ISI 25 /* Image Sensor Interface */
-#define AT91CAP9_ID_LCDC 26 /* LCD Controller */
-#define AT91CAP9_ID_DMA 27 /* DMA Controller */
-#define AT91CAP9_ID_UDPHS 28 /* USB High Speed Device Port */
-#define AT91CAP9_ID_UHP 29 /* USB Host Port */
-#define AT91CAP9_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */
-#define AT91CAP9_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91CAP9_BASE_UDPHS 0xfff78000
-#define AT91CAP9_BASE_TCB0 0xfff7c000
-#define AT91CAP9_BASE_TC0 0xfff7c000
-#define AT91CAP9_BASE_TC1 0xfff7c040
-#define AT91CAP9_BASE_TC2 0xfff7c080
-#define AT91CAP9_BASE_MCI0 0xfff80000
-#define AT91CAP9_BASE_MCI1 0xfff84000
-#define AT91CAP9_BASE_TWI 0xfff88000
-#define AT91CAP9_BASE_US0 0xfff8c000
-#define AT91CAP9_BASE_US1 0xfff90000
-#define AT91CAP9_BASE_US2 0xfff94000
-#define AT91CAP9_BASE_SSC0 0xfff98000
-#define AT91CAP9_BASE_SSC1 0xfff9c000
-#define AT91CAP9_BASE_AC97C 0xfffa0000
-#define AT91CAP9_BASE_SPI0 0xfffa4000
-#define AT91CAP9_BASE_SPI1 0xfffa8000
-#define AT91CAP9_BASE_CAN 0xfffac000
-#define AT91CAP9_BASE_PWMC 0xfffb8000
-#define AT91CAP9_BASE_EMAC 0xfffbc000
-#define AT91CAP9_BASE_ADC 0xfffc0000
-#define AT91CAP9_BASE_ISI 0xfffc4000
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS)
-#define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS)
-#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS)
-#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
-#define AT91_GPBR (cpu_is_at91cap9_revB() ? \
- (0xfffffd50 - AT91_BASE_SYS) : \
- (0xfffffd60 - AT91_BASE_SYS))
-
-#define AT91CAP9_BASE_ECC 0xffffe200
-#define AT91CAP9_BASE_DMA 0xffffec00
-#define AT91CAP9_BASE_SMC 0xffffe800
-#define AT91CAP9_BASE_DBGU AT91_BASE_DBGU1
-#define AT91CAP9_BASE_PIOA 0xfffff200
-#define AT91CAP9_BASE_PIOB 0xfffff400
-#define AT91CAP9_BASE_PIOC 0xfffff600
-#define AT91CAP9_BASE_PIOD 0xfffff800
-#define AT91CAP9_BASE_RSTC 0xfffffd00
-#define AT91CAP9_BASE_SHDWC 0xfffffd10
-#define AT91CAP9_BASE_RTT 0xfffffd20
-#define AT91CAP9_BASE_PIT 0xfffffd30
-#define AT91CAP9_BASE_WDT 0xfffffd40
-
-#define AT91_USART0 AT91CAP9_BASE_US0
-#define AT91_USART1 AT91CAP9_BASE_US1
-#define AT91_USART2 AT91CAP9_BASE_US2
-
-
-/*
- * Internal Memory.
- */
-#define AT91CAP9_SRAM_BASE 0x00100000 /* Internal SRAM base address */
-#define AT91CAP9_SRAM_SIZE (32 * SZ_1K) /* Internal SRAM size (32Kb) */
-
-#define AT91CAP9_ROM_BASE 0x00400000 /* Internal ROM base address */
-#define AT91CAP9_ROM_SIZE (32 * SZ_1K) /* Internal ROM size (32Kb) */
-
-#define AT91CAP9_LCDC_BASE 0x00500000 /* LCD Controller */
-#define AT91CAP9_UDPHS_FIFO 0x00600000 /* USB High Speed Device Port */
-#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/at91cap9_matrix.h b/arch/arm/mach-at91/include/mach/at91cap9_matrix.h
deleted file mode 100644
index 4b9d4af..0000000
--- a/arch/arm/mach-at91/include/mach/at91cap9_matrix.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91cap9_matrix.h
- *
- * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- * Copyright (C) 2006 Atmel Corporation.
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91CAP9 datasheet revision B (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91CAP9_MATRIX_H
-#define AT91CAP9_MATRIX_H
-
-#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
-#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */
-#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */
-#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */
-#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */
-#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */
-#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */
-#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
-#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
-#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
-#define AT91_MATRIX_ULBT_FOUR (2 << 0)
-#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
-#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
-
-#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
-#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */
-#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */
-#define AT91_MATRIX_SCFG8 (AT91_MATRIX + 0x60) /* Slave Configuration Register 8 */
-#define AT91_MATRIX_SCFG9 (AT91_MATRIX + 0x64) /* Slave Configuration Register 9 */
-#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
-#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
-#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
-#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
-#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
-#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
-
-#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */
-#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */
-#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */
-#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */
-#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */
-#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
-#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */
-#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */
-#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */
-#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */
-#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */
-#define AT91_MATRIX_PRAS8 (AT91_MATRIX + 0xC0) /* Priority Register A for Slave 8 */
-#define AT91_MATRIX_PRBS8 (AT91_MATRIX + 0xC4) /* Priority Register B for Slave 8 */
-#define AT91_MATRIX_PRAS9 (AT91_MATRIX + 0xC8) /* Priority Register A for Slave 9 */
-#define AT91_MATRIX_PRBS9 (AT91_MATRIX + 0xCC) /* Priority Register B for Slave 9 */
-#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
-#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
-#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
-#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
-#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
-#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
-#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
-#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
-#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
-#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */
-#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */
-#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */
-
-#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
-#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define AT91_MATRIX_RCB2 (1 << 2)
-#define AT91_MATRIX_RCB3 (1 << 3)
-#define AT91_MATRIX_RCB4 (1 << 4)
-#define AT91_MATRIX_RCB5 (1 << 5)
-#define AT91_MATRIX_RCB6 (1 << 6)
-#define AT91_MATRIX_RCB7 (1 << 7)
-#define AT91_MATRIX_RCB8 (1 << 8)
-#define AT91_MATRIX_RCB9 (1 << 9)
-#define AT91_MATRIX_RCB10 (1 << 10)
-#define AT91_MATRIX_RCB11 (1 << 11)
-
-#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */
-#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */
-
-#define AT91_MATRIX_UDPHS (AT91_MATRIX + 0x118) /* USBHS Special Function Register [AT91CAP9 only] */
-#define AT91_MATRIX_SELECT_UDPHS (0 << 31) /* select High Speed UDP */
-#define AT91_MATRIX_SELECT_UDP (1 << 31) /* select standard UDP */
-#define AT91_MATRIX_UDPHS_BYPASS_LOCK (1 << 30) /* bypass lock bit */
-
-#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */
-#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_EBI_CS1A_BCRAMC (1 << 1)
-#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
-#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
-#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */
-#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4)
-#define AT91_MATRIX_EBI_CS4A_SMC_CF1 (1 << 4)
-#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */
-#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5)
-#define AT91_MATRIX_EBI_CS5A_SMC_CF2 (1 << 5)
-#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-#define AT91_MATRIX_EBI_DQSPDC (1 << 9) /* Data Qualifier Strobe Pull-Down Configuration */
-#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
-#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
-#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
-
-#define AT91_MPBS2_SFR (AT91_MATRIX + 0x12C) /* MPBlock Slave 2 Special Function Register */
-#define AT91_MPBS3_SFR (AT91_MATRIX + 0x130) /* MPBlock Slave 3 Special Function Register */
-#define AT91_APB_SFR (AT91_MATRIX + 0x134) /* APB Bridge Special Function Register */
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
index e2f8da8..5d4a9f8 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
@@ -59,7 +59,6 @@
#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */
#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */
#define AT91_DDRSDRC_TWTR (0x7 << 24) /* Internal Write to Read delay */
-#define AT91CAP9_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */
#define AT91_DDRSDRC_RED_WRRD (0x1 << 27) /* Reduce Write to Read Delay [SAM9 Only] */
#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */
@@ -76,7 +75,6 @@
#define AT91_DDRSDRC_TRTP (0x7 << 12) /* Read to Precharge delay */
#define AT91_DDRSDRC_LPR 0x1C /* Low Power Register */
-#define AT91CAP9_DDRSDRC_LPR 0x18 /* Low Power Register */
#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */
#define AT91_DDRSDRC_LPCB_DISABLE 0
#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1
@@ -94,11 +92,9 @@
#define AT91_DDRSDRC_UPD_MR (3 << 20) /* Update load mode register and extended mode register */
#define AT91_DDRSDRC_MDR 0x20 /* Memory Device Register */
-#define AT91CAP9_DDRSDRC_MDR 0x1C /* Memory Device Register */
#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */
#define AT91_DDRSDRC_MD_SDR 0
#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1
-#define AT91CAP9_DDRSDRC_MD_DDR 2
#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3
#define AT91_DDRSDRC_MD_DDR2 6 /* [SAM9 Only] */
#define AT91_DDRSDRC_DBW (1 << 4) /* Data Bus Width */
@@ -106,16 +102,10 @@
#define AT91_DDRSDRC_DBW_16BITS (1 << 4)
#define AT91_DDRSDRC_DLL 0x24 /* DLL Information Register */
-#define AT91CAP9_DDRSDRC_DLL 0x20 /* DLL Information Register */
#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */
#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */
#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */
-#define AT91CAP9_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */
-#define AT91CAP9_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */
-#define AT91CAP9_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */
#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */
-#define AT91CAP9_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */
-#define AT91CAP9_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */
#define AT91_DDRSDRC_HS 0x2C /* High Speed Register [SAM9 Only] */
#define AT91_DDRSDRC_DIS_ATCP_RD (1 << 2) /* Anticip read access is disabled */
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 3b33f07..dc8d6d4 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -107,6 +107,8 @@
u8 ale; /* address line number connected to ALE */
u8 cle; /* address line number connected to CLE */
u8 bus_width_16; /* buswidth is 16 bit */
+ u8 correction_cap; /* PMECC correction capability */
+ u16 sector_size; /* Sector size for PMECC */
struct mtd_partition *parts;
unsigned int num_parts;
};
@@ -179,7 +181,9 @@
extern void __init at91_add_device_ac97(struct ac97c_platform_data *data);
/* ISI */
-extern void __init at91_add_device_isi(void);
+struct isi_platform_data;
+extern void __init at91_add_device_isi(struct isi_platform_data *data,
+ bool use_pck_as_mck);
/* Touchscreen Controller */
struct at91_tsadcc_data {
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index f6ce936..0118c33 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -25,7 +25,6 @@
#define ARCH_ID_AT91SAM9G45MRL 0x819b05a2 /* aka 9G45-ES2 & non ES lots */
#define ARCH_ID_AT91SAM9G45ES 0x819b05a1 /* 9G45-ES (Engineering Sample) */
#define ARCH_ID_AT91SAM9X5 0x819a05a0
-#define ARCH_ID_AT91CAP9 0x039A03A0
#define ARCH_ID_AT91SAM9XE128 0x329973a0
#define ARCH_ID_AT91SAM9XE256 0x329a93a0
@@ -51,10 +50,6 @@
#define ARCH_FAMILY_AT91SAM9 0x01900000
#define ARCH_FAMILY_AT91SAM9XE 0x02900000
-/* PMC revision */
-#define ARCH_REVISION_CAP9_B 0x399
-#define ARCH_REVISION_CAP9_C 0x601
-
/* RM9200 type */
#define ARCH_REVISON_9200_BGA (0 << 0)
#define ARCH_REVISON_9200_PQFP (1 << 0)
@@ -63,9 +58,6 @@
/* 920T */
AT91_SOC_RM9200,
- /* CAP */
- AT91_SOC_CAP9,
-
/* SAM92xx */
AT91_SOC_SAM9260, AT91_SOC_SAM9261, AT91_SOC_SAM9263,
@@ -86,9 +78,6 @@
/* RM9200 */
AT91_SOC_RM9200_BGA, AT91_SOC_RM9200_PQFP,
- /* CAP9 */
- AT91_SOC_CAP9_REV_B, AT91_SOC_CAP9_REV_C,
-
/* SAM9260 */
AT91_SOC_SAM9XE,
@@ -195,16 +184,6 @@
#define cpu_is_at91sam9x25() (0)
#endif
-#ifdef CONFIG_ARCH_AT91CAP9
-#define cpu_is_at91cap9() (at91_soc_initdata.type == AT91_SOC_CAP9)
-#define cpu_is_at91cap9_revB() (at91_soc_initdata.subtype == AT91_SOC_CAP9_REV_B)
-#define cpu_is_at91cap9_revC() (at91_soc_initdata.subtype == AT91_SOC_CAP9_REV_C)
-#else
-#define cpu_is_at91cap9() (0)
-#define cpu_is_at91cap9_revB() (0)
-#define cpu_is_at91cap9_revC() (0)
-#endif
-
/*
* Since this is ARM, we will never run on any AVR32 CPU. But these
* definitions may reduce clutter in common drivers.
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index 2d0e4e9..c213f2862 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -19,7 +19,7 @@
/* DBGU base */
/* rm9200, 9260/9g20, 9261/9g10, 9rl */
#define AT91_BASE_DBGU0 0xfffff200
-/* 9263, 9g45, cap9 */
+/* 9263, 9g45 */
#define AT91_BASE_DBGU1 0xffffee00
#if defined(CONFIG_ARCH_AT91RM9200)
@@ -34,8 +34,6 @@
#include <mach/at91sam9rl.h>
#elif defined(CONFIG_ARCH_AT91SAM9G45)
#include <mach/at91sam9g45.h>
-#elif defined(CONFIG_ARCH_AT91CAP9)
-#include <mach/at91cap9.h>
#elif defined(CONFIG_ARCH_AT91X40)
#include <mach/at91x40.h>
#else
diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h
deleted file mode 100644
index cbd64f3..0000000
--- a/arch/arm/mach-at91/include/mach/system.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/system.h
- *
- * Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <mach/hardware.h>
-#include <mach/at91_st.h>
-#include <mach/at91_dbgu.h>
-#include <mach/at91_pmc.h>
-
-static inline void arch_idle(void)
-{
- /*
- * Disable the processor clock. The processor will be automatically
- * re-enabled by an interrupt or by a reset.
- */
-#ifdef AT91_PS
- at91_sys_write(AT91_PS_CR, AT91_PS_CR_CPU);
-#else
- at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
-#endif
-#ifndef CONFIG_CPU_ARM920T
- /*
- * Set the processor (CP15) into 'Wait for Interrupt' mode.
- * Post-RM9200 processors need this in conjunction with the above
- * to save power when idle.
- */
- cpu_do_idle();
-#endif
-}
-
-#endif
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 1606379..87be5aa 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -150,11 +150,6 @@
pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
return 0;
}
- } else if (cpu_is_at91cap9()) {
- if ((scsr & AT91CAP9_PMC_UHP) != 0) {
- pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
- return 0;
- }
}
#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 7eb40d2..218d816 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -24,24 +24,6 @@
#define wait_for_interrupt_enable() asm volatile ("mcr p15, 0, %0, c7, c0, 4" \
: : "r" (0))
-#elif defined(CONFIG_ARCH_AT91CAP9)
-#include <mach/at91sam9_ddrsdr.h>
-
-
-static inline u32 sdram_selfrefresh_enable(void)
-{
- u32 saved_lpr, lpr;
-
- saved_lpr = at91_ramc_read(0, AT91CAP9_DDRSDRC_LPR);
-
- lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
- at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
- return saved_lpr;
-}
-
-#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, saved_lpr)
-#define wait_for_interrupt_enable() cpu_do_idle()
-
#elif defined(CONFIG_ARCH_AT91SAM9G45)
#include <mach/at91sam9_ddrsdr.h>
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 92dfb84..f8539a8b 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -18,8 +18,7 @@
#if defined(CONFIG_ARCH_AT91RM9200)
#include <mach/at91rm9200_mc.h>
-#elif defined(CONFIG_ARCH_AT91CAP9) \
- || defined(CONFIG_ARCH_AT91SAM9G45)
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
#include <mach/at91sam9_ddrsdr.h>
#else
#include <mach/at91sam9_sdramc.h>
@@ -130,8 +129,7 @@
/* Put SDRAM in self-refresh mode */
mov r3, #1
str r3, [r2, #AT91_SDRAMC_SRR]
-#elif defined(CONFIG_ARCH_AT91CAP9) \
- || defined(CONFIG_ARCH_AT91SAM9G45)
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
/* prepare for DDRAM self-refresh mode */
ldr r3, [r2, #AT91_DDRSDRC_LPR]
@@ -263,8 +261,7 @@
#ifdef CONFIG_ARCH_AT91RM9200
/* Do nothing - self-refresh is automatically disabled. */
-#elif defined(CONFIG_ARCH_AT91CAP9) \
- || defined(CONFIG_ARCH_AT91SAM9G45)
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
/* Restore LPR on AT91 with DDRAM */
ldr r3, .saved_sam9_lpr
str r3, [r2, #AT91_DDRSDRC_LPR]
@@ -305,8 +302,7 @@
#ifdef CONFIG_ARCH_AT91RM9200
.at91_va_base_sdramc:
.word AT91_VA_BASE_SYS
-#elif defined(CONFIG_ARCH_AT91CAP9) \
- || defined(CONFIG_ARCH_AT91SAM9G45)
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
.at91_va_base_sdramc:
.word AT91_VA_BASE_SYS + AT91_DDRSDRC0
#else
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index 69d3fc4..620c67e 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -86,20 +86,6 @@
socid = cidr & ~AT91_CIDR_VERSION;
switch (socid) {
- case ARCH_ID_AT91CAP9: {
-#ifdef CONFIG_AT91_PMC_UNIT
- u32 pmc_ver = at91_sys_read(AT91_PMC_VER);
-
- if (pmc_ver == ARCH_REVISION_CAP9_B)
- at91_soc_initdata.subtype = AT91_SOC_CAP9_REV_B;
- else if (pmc_ver == ARCH_REVISION_CAP9_C)
- at91_soc_initdata.subtype = AT91_SOC_CAP9_REV_C;
-#endif
- at91_soc_initdata.type = AT91_SOC_CAP9;
- at91_boot_soc = at91cap9_soc;
- break;
- }
-
case ARCH_ID_AT91RM9200:
at91_soc_initdata.type = AT91_SOC_RM9200;
at91_boot_soc = at91rm9200_soc;
@@ -200,7 +186,6 @@
static const char *soc_name[] = {
[AT91_SOC_RM9200] = "at91rm9200",
- [AT91_SOC_CAP9] = "at91cap9",
[AT91_SOC_SAM9260] = "at91sam9260",
[AT91_SOC_SAM9261] = "at91sam9261",
[AT91_SOC_SAM9263] = "at91sam9263",
@@ -221,8 +206,6 @@
static const char *soc_subtype_name[] = {
[AT91_SOC_RM9200_BGA] = "at91rm9200 BGA",
[AT91_SOC_RM9200_PQFP] = "at91rm9200 PQFP",
- [AT91_SOC_CAP9_REV_B] = "at91cap9 revB",
- [AT91_SOC_CAP9_REV_C] = "at91cap9 revC",
[AT91_SOC_SAM9XE] = "at91sam9xe",
[AT91_SOC_SAM9G45ES] = "at91sam9g45es",
[AT91_SOC_SAM9M10] = "at91sam9m10",
diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h
index 4588ae6..5db4aa4 100644
--- a/arch/arm/mach-at91/soc.h
+++ b/arch/arm/mach-at91/soc.h
@@ -13,7 +13,6 @@
};
extern struct at91_init_soc at91_boot_soc;
-extern struct at91_init_soc at91cap9_soc;
extern struct at91_init_soc at91rm9200_soc;
extern struct at91_init_soc at91sam9260_soc;
extern struct at91_init_soc at91sam9261_soc;
@@ -27,10 +26,6 @@
return at91_boot_soc.init != NULL;
}
-#if !defined(CONFIG_ARCH_AT91CAP9)
-#define at91cap9_soc at91_boot_soc
-#endif
-
#if !defined(CONFIG_ARCH_AT91RM9200)
#define at91rm9200_soc at91_boot_soc
#endif
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index 6b67b7e..22e4e0a 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -52,27 +52,8 @@
#include <mach/csp/chipcHw_inline.h>
#include <mach/csp/tmrHw_reg.h>
-#define AMBA_DEVICE(name, initname, base, plat, size) \
-static struct amba_device name##_device = { \
- .dev = { \
- .coherent_dma_mask = ~0, \
- .init_name = initname, \
- .platform_data = plat \
- }, \
- .res = { \
- .start = MM_ADDR_IO_##base, \
- .end = MM_ADDR_IO_##base + (size) - 1, \
- .flags = IORESOURCE_MEM \
- }, \
- .dma_mask = ~0, \
- .irq = { \
- IRQ_##base \
- } \
-}
-
-
-AMBA_DEVICE(uartA, "uarta", UARTA, NULL, SZ_4K);
-AMBA_DEVICE(uartB, "uartb", UARTB, NULL, SZ_4K);
+static AMBA_APB_DEVICE(uartA, "uarta", MM_ADDR_IO_UARTA, { IRQ_UARTA }, NULL);
+static AMBA_APB_DEVICE(uartB, "uartb", MM_ADDR_IO_UARTB, { IRQ_UARTB }, NULL);
static struct clk pll1_clk = {
.name = "PLL1",
diff --git a/arch/arm/mach-bcmring/include/mach/system.h b/arch/arm/mach-bcmring/include/mach/system.h
deleted file mode 100644
index cb78250..0000000
--- a/arch/arm/mach-bcmring/include/mach/system.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
index ab1711b..8736c1a 100644
--- a/arch/arm/mach-clps711x/common.c
+++ b/arch/arm/mach-clps711x/common.c
@@ -225,3 +225,19 @@
{
soft_restart(0);
}
+
+static void clps711x_idle(void)
+{
+ clps_writel(1, HALT);
+ __asm__ __volatile__(
+ "mov r0, r0\n\
+ mov r0, r0");
+}
+
+static int __init clps711x_idle_init(void)
+{
+ arm_pm_idle = clps711x_idle;
+ return 0;
+}
+
+arch_initcall(clps711x_idle_init);
diff --git a/arch/arm/mach-clps711x/include/mach/system.h b/arch/arm/mach-clps711x/include/mach/system.h
deleted file mode 100644
index 23d6ef8..0000000
--- a/arch/arm/mach-clps711x/include/mach/system.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/mach-clps711x/include/mach/system.h
- *
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/hardware/clps7111.h>
-
-static inline void arch_idle(void)
-{
- clps_writel(1, HALT);
- __asm__ __volatile__(
- "mov r0, r0\n\
- mov r0, r0");
-}
-
-#endif
diff --git a/arch/arm/mach-cns3xxx/include/mach/system.h b/arch/arm/mach-cns3xxx/include/mach/system.h
deleted file mode 100644
index 9e56b7d..0000000
--- a/arch/arm/mach-cns3xxx/include/mach/system.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright 2000 Deep Blue Solutions Ltd
- * Copyright 2003 ARM Limited
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-
-#include <asm/proc-fns.h>
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h
deleted file mode 100644
index fcb7a01..0000000
--- a/arch/arm/mach-davinci/include/mach/system.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * DaVinci system defines
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <mach/common.h>
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-dove/include/mach/system.h b/arch/arm/mach-dove/include/mach/system.h
deleted file mode 100644
index 3027954..0000000
--- a/arch/arm/mach-dove/include/mach/system.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 294aad0..804c912 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -271,8 +271,33 @@
&am79c961_device,
};
+/*
+ * EBSA110 idling methodology:
+ *
+ * We can not execute the "wait for interrupt" instruction since that
+ * will stop our MCLK signal (which provides the clock for the glue
+ * logic, and therefore the timer interrupt).
+ *
+ * Instead, we spin, polling the IRQ_STAT register for the occurrence
+ * of any interrupt with core clock down to the memory clock.
+ */
+static void ebsa110_idle(void)
+{
+ const char *irq_stat = (char *)0xff000000;
+
+ /* disable clock switching */
+ asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
+
+ /* wait for an interrupt to occur */
+ while (!*irq_stat);
+
+ /* enable clock switching */
+ asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
+}
+
static int __init ebsa110_init(void)
{
+ arm_pm_idle = ebsa110_idle;
return platform_add_devices(ebsa110_devices, ARRAY_SIZE(ebsa110_devices));
}
diff --git a/arch/arm/mach-ebsa110/include/mach/system.h b/arch/arm/mach-ebsa110/include/mach/system.h
deleted file mode 100644
index 2e4af65..0000000
--- a/arch/arm/mach-ebsa110/include/mach/system.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * arch/arm/mach-ebsa110/include/mach/system.h
- *
- * Copyright (C) 1996-2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-/*
- * EBSA110 idling methodology:
- *
- * We can not execute the "wait for interrupt" instruction since that
- * will stop our MCLK signal (which provides the clock for the glue
- * logic, and therefore the timer interrupt).
- *
- * Instead, we spin, polling the IRQ_STAT register for the occurrence
- * of any interrupt with core clock down to the memory clock.
- */
-static inline void arch_idle(void)
-{
- const char *irq_stat = (char *)0xff000000;
-
- /* disable clock switching */
- asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
-
- /* wait for an interrupt to occur */
- while (!*irq_stat);
-
- /* enable clock switching */
- asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
-}
-
-#endif
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 24203f9..903edb0 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -279,48 +279,14 @@
.set_mctrl = ep93xx_uart_set_mctrl,
};
-static struct amba_device uart1_device = {
- .dev = {
- .init_name = "apb:uart1",
- .platform_data = &ep93xx_uart_data,
- },
- .res = {
- .start = EP93XX_UART1_PHYS_BASE,
- .end = EP93XX_UART1_PHYS_BASE + 0x0fff,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_EP93XX_UART1, NO_IRQ },
- .periphid = 0x00041010,
-};
+static AMBA_APB_DEVICE(uart1, "apb:uart1", 0x00041010, EP93XX_UART1_PHYS_BASE,
+ { IRQ_EP93XX_UART1 }, &ep93xx_uart_data);
-static struct amba_device uart2_device = {
- .dev = {
- .init_name = "apb:uart2",
- .platform_data = &ep93xx_uart_data,
- },
- .res = {
- .start = EP93XX_UART2_PHYS_BASE,
- .end = EP93XX_UART2_PHYS_BASE + 0x0fff,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_EP93XX_UART2, NO_IRQ },
- .periphid = 0x00041010,
-};
+static AMBA_APB_DEVICE(uart2, "apb:uart2", 0x00041010, EP93XX_UART2_PHYS_BASE,
+ { IRQ_EP93XX_UART2 }, &ep93xx_uart_data);
-static struct amba_device uart3_device = {
- .dev = {
- .init_name = "apb:uart3",
- .platform_data = &ep93xx_uart_data,
- },
- .res = {
- .start = EP93XX_UART3_PHYS_BASE,
- .end = EP93XX_UART3_PHYS_BASE + 0x0fff,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_EP93XX_UART3, NO_IRQ },
- .periphid = 0x00041010,
-};
-
+static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE,
+ { IRQ_EP93XX_UART3 }, &ep93xx_uart_data);
static struct resource ep93xx_rtc_resource[] = {
{
diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h
deleted file mode 100644
index b5bec7c..0000000
--- a/arch/arm/mach-ep93xx/include/mach/system.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/system.h
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index c59e188..031c1e5 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -201,14 +201,6 @@
},
};
-static void exynos_idle(void)
-{
- if (!need_resched())
- cpu_do_idle();
-
- local_irq_enable();
-}
-
void exynos4_restart(char mode, const char *cmd)
{
__raw_writel(0x1, S5P_SWRESET);
@@ -467,10 +459,6 @@
int __init exynos_init(void)
{
printk(KERN_INFO "EXYNOS: Initializing architecture\n");
-
- /* set idle function */
- pm_idle = exynos_idle;
-
return device_register(&exynos4_dev);
}
diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c
index b10fcd2..91370de 100644
--- a/arch/arm/mach-exynos/dma.c
+++ b/arch/arm/mach-exynos/dma.c
@@ -74,21 +74,8 @@
.peri_id = pdma0_peri,
};
-struct amba_device exynos4_device_pdma0 = {
- .dev = {
- .init_name = "dma-pl330.0",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &exynos4_pdma0_pdata,
- },
- .res = {
- .start = EXYNOS4_PA_PDMA0,
- .end = EXYNOS4_PA_PDMA0 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA0, NO_IRQ},
- .periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(exynos4_pdma0, "dma-pl330.0", 0x00041330, EXYNOS4_PA_PDMA0,
+ {IRQ_PDMA0}, &exynos4_pdma0_pdata);
u8 pdma1_peri[] = {
DMACH_PCM0_RX,
@@ -123,21 +110,8 @@
.peri_id = pdma1_peri,
};
-struct amba_device exynos4_device_pdma1 = {
- .dev = {
- .init_name = "dma-pl330.1",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &exynos4_pdma1_pdata,
- },
- .res = {
- .start = EXYNOS4_PA_PDMA1,
- .end = EXYNOS4_PA_PDMA1 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA1, NO_IRQ},
- .periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(exynos4_pdma1, "dma-pl330.1", 0x00041330, EXYNOS4_PA_PDMA1,
+ {IRQ_PDMA1}, &exynos4_pdma1_pdata);
static int __init exynos4_dma_init(void)
{
@@ -146,11 +120,11 @@
dma_cap_set(DMA_SLAVE, exynos4_pdma0_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, exynos4_pdma0_pdata.cap_mask);
- amba_device_register(&exynos4_device_pdma0, &iomem_resource);
+ amba_device_register(&exynos4_pdma0_device, &iomem_resource);
dma_cap_set(DMA_SLAVE, exynos4_pdma1_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, exynos4_pdma1_pdata.cap_mask);
- amba_device_register(&exynos4_device_pdma1, &iomem_resource);
+ amba_device_register(&exynos4_pdma1_device, &iomem_resource);
return 0;
}
diff --git a/arch/arm/mach-exynos/include/mach/system.h b/arch/arm/mach-exynos/include/mach/system.h
deleted file mode 100644
index 0063a6d..0000000
--- a/arch/arm/mach-exynos/include/mach/system.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/system.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - system support header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
- /* nothing here yet */
-}
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-footbridge/include/mach/system.h b/arch/arm/mach-footbridge/include/mach/system.h
deleted file mode 100644
index a174a58..0000000
--- a/arch/arm/mach-footbridge/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-footbridge/include/mach/system.h
- *
- * Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-gemini/Makefile b/arch/arm/mach-gemini/Makefile
index c5b24b9..7355c0b 100644
--- a/arch/arm/mach-gemini/Makefile
+++ b/arch/arm/mach-gemini/Makefile
@@ -4,7 +4,7 @@
# Object file lists.
-obj-y := irq.o mm.o time.o devices.o gpio.o
+obj-y := irq.o mm.o time.o devices.o gpio.o idle.o
# Board-specific support
obj-$(CONFIG_MACH_NAS4220B) += board-nas4220b.o
diff --git a/arch/arm/mach-gemini/idle.c b/arch/arm/mach-gemini/idle.c
new file mode 100644
index 0000000..92bbd6b
--- /dev/null
+++ b/arch/arm/mach-gemini/idle.c
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-gemini/idle.c
+ */
+
+#include <linux/init.h>
+#include <asm/system.h>
+#include <asm/proc-fns.h>
+
+static void gemini_idle(void)
+{
+ /*
+ * Because of broken hardware we have to enable interrupts or the CPU
+ * will never wakeup... Acctualy it is not very good to enable
+ * interrupts first since scheduler can miss a tick, but there is
+ * no other way around this. Platforms that needs it for power saving
+ * should call enable_hlt() in init code, since by default it is
+ * disabled.
+ */
+ local_irq_enable();
+ cpu_do_idle();
+}
+
+static int __init gemini_idle_init(void)
+{
+ arm_pm_idle = gemini_idle;
+ return 0;
+}
+
+arch_initcall(gemini_idle_init);
diff --git a/arch/arm/mach-gemini/include/mach/system.h b/arch/arm/mach-gemini/include/mach/system.h
index 4d9c1f8..a33b5a1 100644
--- a/arch/arm/mach-gemini/include/mach/system.h
+++ b/arch/arm/mach-gemini/include/mach/system.h
@@ -14,20 +14,6 @@
#include <mach/hardware.h>
#include <mach/global_reg.h>
-static inline void arch_idle(void)
-{
- /*
- * Because of broken hardware we have to enable interrupts or the CPU
- * will never wakeup... Acctualy it is not very good to enable
- * interrupts here since scheduler can miss a tick, but there is
- * no other way around this. Platforms that needs it for power saving
- * should call enable_hlt() in init code, since by default it is
- * disabled.
- */
- local_irq_enable();
- cpu_do_idle();
-}
-
static inline void arch_reset(char mode, const char *cmd)
{
__raw_writel(RESET_GLOBAL | RESET_CPU1,
diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c
index 9485a8f..ca70e5f 100644
--- a/arch/arm/mach-gemini/irq.c
+++ b/arch/arm/mach-gemini/irq.c
@@ -73,8 +73,8 @@
unsigned int i, mode = 0, level = 0;
/*
- * Disable arch_idle() by default since it is buggy
- * For more info see arch/arm/mach-gemini/include/mach/system.h
+ * Disable the idle handler by default since it is buggy
+ * For more info see arch/arm/mach-gemini/idle.c
*/
disable_hlt();
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
index f8a2f6b..e756d1a 100644
--- a/arch/arm/mach-h720x/common.c
+++ b/arch/arm/mach-h720x/common.c
@@ -247,3 +247,21 @@
{
CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
}
+
+static void h720x__idle(void)
+{
+ CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
+ nop();
+ nop();
+ CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN;
+ nop();
+ nop();
+}
+
+static int __init h720x_idle_init(void)
+{
+ arm_pm_idle = h720x__idle;
+ return 0;
+}
+
+arch_initcall(h720x_idle_init);
diff --git a/arch/arm/mach-h720x/include/mach/system.h b/arch/arm/mach-h720x/include/mach/system.h
deleted file mode 100644
index 16ac46e..0000000
--- a/arch/arm/mach-h720x/include/mach/system.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/system.h
- *
- * Copyright (C) 2001-2002 Jungjun Kim, Hynix Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * arch/arm/mach-h720x/include/mach/system.h
- *
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-#include <mach/hardware.h>
-
-static void arch_idle(void)
-{
- CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
- nop();
- nop();
- CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN;
- nop();
- nop();
-}
-
-#endif
diff --git a/arch/arm/mach-highbank/include/mach/system.h b/arch/arm/mach-highbank/include/mach/system.h
deleted file mode 100644
index b1d8b5f..0000000
--- a/arch/arm/mach-highbank/include/mach/system.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright 2010-2011 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 4defb97b..f7da872 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -304,6 +304,7 @@
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MX2_CAMERA
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_SPI_IMX
diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c
index 2d88f8b..111c328 100644
--- a/arch/arm/mach-imx/clock-imx6q.c
+++ b/arch/arm/mach-imx/clock-imx6q.c
@@ -329,6 +329,12 @@
#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26)
#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27)
+#define BP_CCOSR_CKO1_EN 7
+#define BP_CCOSR_CKO1_PODF 4
+#define BM_CCOSR_CKO1_PODF (0x7 << 4)
+#define BP_CCOSR_CKO1_SEL 0
+#define BM_CCOSR_CKO1_SEL (0xf << 0)
+
#define FREQ_480M 480000000
#define FREQ_528M 528000000
#define FREQ_594M 594000000
@@ -393,6 +399,7 @@
static struct clk ipu2_di0_clk;
static struct clk ipu2_di1_clk;
static struct clk enfc_clk;
+static struct clk cko1_clk;
static struct clk dummy_clk = {};
static unsigned long external_high_reference;
@@ -938,6 +945,24 @@
writel_relaxed(reg, clk->enable_reg);
}
+static int _clk_enable_1b(struct clk *clk)
+{
+ u32 reg;
+ reg = readl_relaxed(clk->enable_reg);
+ reg |= 0x1 << clk->enable_shift;
+ writel_relaxed(reg, clk->enable_reg);
+
+ return 0;
+}
+
+static void _clk_disable_1b(struct clk *clk)
+{
+ u32 reg;
+ reg = readl_relaxed(clk->enable_reg);
+ reg &= ~(0x1 << clk->enable_shift);
+ writel_relaxed(reg, clk->enable_reg);
+}
+
struct divider {
struct clk *clk;
void __iomem *reg;
@@ -983,6 +1008,7 @@
DEF_CLK_DIV1(ipu2_di1_pre_div, &ipu2_di1_pre_clk, CSCDR2, IPU2_DI1_PRE);
DEF_CLK_DIV1(ipu1_div, &ipu1_clk, CSCDR3, IPU1_HSP);
DEF_CLK_DIV1(ipu2_div, &ipu2_clk, CSCDR3, IPU2_HSP);
+DEF_CLK_DIV1(cko1_div, &cko1_clk, CCOSR, CKO1);
#define DEF_CLK_DIV2(d, c, r, b) \
static struct divider d = { \
@@ -1038,6 +1064,7 @@
&enfc_div,
&spdif_div,
&asrc_serial_div,
+ &cko1_div,
};
static unsigned long ldb_di_clk_get_rate(struct clk *clk)
@@ -1625,6 +1652,32 @@
DEF_IPU_MUX(1);
DEF_IPU_MUX(2);
+static struct multiplexer cko1_mux = {
+ .clk = &cko1_clk,
+ .reg = CCOSR,
+ .bp = BP_CCOSR_CKO1_SEL,
+ .bm = BM_CCOSR_CKO1_SEL,
+ .parents = {
+ &pll3_usb_otg,
+ &pll2_bus,
+ &pll1_sys,
+ &pll5_video,
+ &dummy_clk,
+ &axi_clk,
+ &enfc_clk,
+ &ipu1_di0_clk,
+ &ipu1_di1_clk,
+ &ipu2_di0_clk,
+ &ipu2_di1_clk,
+ &ahb_clk,
+ &ipg_clk,
+ &ipg_perclk,
+ &ckil_clk,
+ &pll4_audio,
+ NULL
+ },
+};
+
static struct multiplexer *multiplexers[] = {
&axi_mux,
&periph_mux,
@@ -1667,6 +1720,7 @@
&ipu2_di1_mux,
&ipu1_mux,
&ipu2_mux,
+ &cko1_mux,
};
static int _clk_set_parent(struct clk *clk, struct clk *parent)
@@ -1690,7 +1744,7 @@
break;
i++;
}
- if (!m->parents[i])
+ if (!m->parents[i] || m->parents[i] == &dummy_clk)
return -EINVAL;
val = readl_relaxed(m->reg);
@@ -1745,6 +1799,20 @@
.secondary = s, \
}
+#define DEF_CLK_1B(name, er, es, p, s) \
+ static struct clk name = { \
+ .enable_reg = er, \
+ .enable_shift = es, \
+ .enable = _clk_enable_1b, \
+ .disable = _clk_disable_1b, \
+ .get_rate = _clk_get_rate, \
+ .set_rate = _clk_set_rate, \
+ .round_rate = _clk_round_rate, \
+ .set_parent = _clk_set_parent, \
+ .parent = p, \
+ .secondary = s, \
+ }
+
DEF_CLK(aips_tz1_clk, CCGR0, CG0, &ahb_clk, NULL);
DEF_CLK(aips_tz2_clk, CCGR0, CG1, &ahb_clk, NULL);
DEF_CLK(apbh_dma_clk, CCGR0, CG2, &ahb_clk, NULL);
@@ -1811,6 +1879,7 @@
DEF_CLK(emi_slow_clk, CCGR6, CG5, &axi_clk, NULL);
DEF_CLK(vdo_axi_clk, CCGR6, CG6, &axi_clk, NULL);
DEF_CLK(vpu_clk, CCGR6, CG7, &axi_clk, NULL);
+DEF_CLK_1B(cko1_clk, CCOSR, BP_CCOSR_CKO1_EN, &pll2_bus, NULL);
static int pcie_clk_enable(struct clk *clk)
{
@@ -1922,6 +1991,7 @@
_REGISTER_CLOCK(NULL, "gpmi_io_clk", gpmi_io_clk),
_REGISTER_CLOCK(NULL, "usboh3_clk", usboh3_clk),
_REGISTER_CLOCK(NULL, "sata_clk", sata_clk),
+ _REGISTER_CLOCK(NULL, "cko1_clk", cko1_clk),
};
int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
@@ -2029,6 +2099,8 @@
clk_set_rate(&usdhc3_clk, 49500000);
clk_set_rate(&usdhc4_clk, 49500000);
+ clk_set_parent(&cko1_clk, &ahb_clk);
+
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
base = of_iomap(np, 0);
WARN_ON(!base);
diff --git a/arch/arm/mach-imx/lluart.c b/arch/arm/mach-imx/lluart.c
index d4ab6f2..0213f8d 100644
--- a/arch/arm/mach-imx/lluart.c
+++ b/arch/arm/mach-imx/lluart.c
@@ -17,7 +17,7 @@
#include <mach/hardware.h>
static struct map_desc imx_lluart_desc = {
-#ifdef CONFIG_DEBUG_IMX6Q_UART
+#ifdef CONFIG_DEBUG_IMX6Q_UART4
.virtual = MX6Q_IO_P2V(MX6Q_UART4_BASE_ADDR),
.pfn = __phys_to_pfn(MX6Q_UART4_BASE_ADDR),
.length = MX6Q_UART4_SIZE,
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 8d9f955..e432d4a 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -37,8 +37,8 @@
#define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \
(MX21ADS_MMIO_BASE_ADDR + (offset))
+#define MX21ADS_CS8900A_MMIO_SIZE 0x200000
#define MX21ADS_CS8900A_IRQ IRQ_GPIOE(11)
-#define MX21ADS_CS8900A_IOBASE_REG MX21ADS_REG_ADDR(0x000000)
#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
#define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000)
#define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000)
@@ -159,6 +159,18 @@
.resource = &mx21ads_flash_resource,
};
+static const struct resource mx21ads_cs8900_resources[] __initconst = {
+ DEFINE_RES_MEM(MX21_CS1_BASE_ADDR, MX21ADS_CS8900A_MMIO_SIZE),
+ DEFINE_RES_IRQ(MX21ADS_CS8900A_IRQ),
+};
+
+static const struct platform_device_info mx21ads_cs8900_devinfo __initconst = {
+ .name = "cs89x0",
+ .id = 0,
+ .res = mx21ads_cs8900_resources,
+ .num_res = ARRAY_SIZE(mx21ads_cs8900_resources),
+};
+
static const struct imxuart_platform_data uart_pdata_rts __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -292,6 +304,8 @@
imx21_add_mxc_nand(&mx21ads_nand_board_info);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+ platform_device_register_full(
+ (struct platform_device_info *)&mx21ads_cs8900_devinfo);
}
static void __init mx21ads_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 18f3581..c6d385c 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -31,6 +31,8 @@
#include <linux/regulator/machine.h>
#include <linux/spi/l4f00242t03.h>
+#include <media/soc_camera.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
@@ -52,6 +54,8 @@
#define SD1_CD IMX_GPIO_NR(2, 26)
#define LCD_RESET IMX_GPIO_NR(1, 3)
#define LCD_ENABLE IMX_GPIO_NR(1, 31)
+#define CSI_PWRDWN IMX_GPIO_NR(4, 19)
+#define CSI_RESET IMX_GPIO_NR(3, 6)
static const int mx27pdk_pins[] __initconst = {
/* UART1 */
@@ -141,6 +145,26 @@
PA30_PF_CONTRAST,
LCD_ENABLE | GPIO_GPIO | GPIO_OUT,
LCD_RESET | GPIO_GPIO | GPIO_OUT,
+ /* CSI */
+ PB10_PF_CSI_D0,
+ PB11_PF_CSI_D1,
+ PB12_PF_CSI_D2,
+ PB13_PF_CSI_D3,
+ PB14_PF_CSI_D4,
+ PB15_PF_CSI_MCLK,
+ PB16_PF_CSI_PIXCLK,
+ PB17_PF_CSI_D5,
+ PB18_PF_CSI_D6,
+ PB19_PF_CSI_D7,
+ PB20_PF_CSI_VSYNC,
+ PB21_PF_CSI_HSYNC,
+ CSI_PWRDWN | GPIO_GPIO | GPIO_OUT,
+ CSI_RESET | GPIO_GPIO | GPIO_OUT,
+};
+
+static struct gpio mx27_3ds_camera_gpios[] = {
+ { CSI_PWRDWN, GPIOF_OUT_INIT_HIGH, "camera-power" },
+ { CSI_RESET, GPIOF_OUT_INIT_HIGH, "camera-reset" },
};
static const struct imxuart_platform_data uart_pdata __initconst = {
@@ -242,6 +266,7 @@
static struct regulator_consumer_supply vmmc1_consumers[] = {
REGULATOR_SUPPLY("vcore", "spi0.0"),
+ REGULATOR_SUPPLY("cmos_2v8", "soc-camera-pdrv.0"),
};
static struct regulator_init_data vmmc1_init = {
@@ -270,6 +295,22 @@
.consumer_supplies = vgen_consumers,
};
+static struct regulator_consumer_supply vvib_consumers[] = {
+ REGULATOR_SUPPLY("cmos_vcore", "soc-camera-pdrv.0"),
+};
+
+static struct regulator_init_data vvib_init = {
+ .constraints = {
+ .min_uV = 1300000,
+ .max_uV = 1300000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(vvib_consumers),
+ .consumer_supplies = vvib_consumers,
+};
+
static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = {
{
.id = MC13783_REG_VMMC1,
@@ -283,6 +324,9 @@
}, {
.id = MC13783_REG_GPO3, /* Turn on 3.3V */
.init_data = &gpo_init,
+ }, {
+ .id = MC13783_REG_VVIB, /* Power OV2640 */
+ .init_data = &vvib_init,
},
};
@@ -311,6 +355,51 @@
.num_chipselect = ARRAY_SIZE(spi2_chipselect),
};
+static int mx27_3ds_camera_power(struct device *dev, int on)
+{
+ /* enable or disable the camera */
+ pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE");
+ gpio_set_value(CSI_PWRDWN, on ? 0 : 1);
+
+ if (!on)
+ goto out;
+
+ /* If enabled, give a reset impulse */
+ gpio_set_value(CSI_RESET, 0);
+ msleep(20);
+ gpio_set_value(CSI_RESET, 1);
+ msleep(100);
+
+out:
+ return 0;
+}
+
+static struct i2c_board_info mx27_3ds_i2c_camera = {
+ I2C_BOARD_INFO("ov2640", 0x30),
+};
+
+static struct regulator_bulk_data mx27_3ds_camera_regs[] = {
+ { .supply = "cmos_vcore" },
+ { .supply = "cmos_2v8" },
+};
+
+static struct soc_camera_link iclink_ov2640 = {
+ .bus_id = 0,
+ .board_info = &mx27_3ds_i2c_camera,
+ .i2c_adapter_id = 0,
+ .power = mx27_3ds_camera_power,
+ .regulators = mx27_3ds_camera_regs,
+ .num_regulators = ARRAY_SIZE(mx27_3ds_camera_regs),
+};
+
+static struct platform_device mx27_3ds_ov2640 = {
+ .name = "soc-camera-pdrv",
+ .id = 0,
+ .dev = {
+ .platform_data = &iclink_ov2640,
+ },
+};
+
static struct imx_fb_videomode mx27_3ds_modes[] = {
{ /* 480x640 @ 60 Hz */
.mode = {
@@ -367,12 +456,21 @@
},
};
+static struct platform_device *devices[] __initdata = {
+ &mx27_3ds_ov2640,
+};
+
+static const struct mx2_camera_platform_data mx27_3ds_cam_pdata __initconst = {
+ .clk = 26000000,
+};
+
static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = {
.bitrate = 100000,
};
static void __init mx27pdk_init(void)
{
+ int ret;
imx27_soc_init();
mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
@@ -404,7 +502,17 @@
if (mxc_expio_init(MX27_CS5_BASE_ADDR, EXPIO_PARENT_INT))
pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
+ platform_add_devices(devices, ARRAY_SIZE(devices));
imx27_add_imx_fb(&mx27_3ds_fb_data);
+
+ ret = gpio_request_array(mx27_3ds_camera_gpios,
+ ARRAY_SIZE(mx27_3ds_camera_gpios));
+ if (ret) {
+ pr_err("Failed to request camera gpios");
+ iclink_ov2640.power = NULL;
+ }
+
+ imx27_add_mx2_camera(&mx27_3ds_cam_pdata);
}
static void __init mx27pdk_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index 4917aab..4518e54 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -28,7 +28,6 @@
#include <asm/memory.h>
#include <asm/mach/map.h>
#include <mach/common.h>
-#include <mach/board-mx31ads.h>
#include <mach/iomux-mx3.h>
#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
@@ -39,6 +38,9 @@
#include "devices-imx31.h"
+/* Base address of PBC controller */
+#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT
+
/* PBC Board interrupt status register */
#define PBC_INTSTATUS 0x000016
@@ -62,6 +64,7 @@
#define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
+#define MXC_EXP_IO_BASE MXC_BOARD_IRQ_START
#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE)
#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10)
@@ -69,6 +72,10 @@
#define MXC_MAX_EXP_IO_LINES 16
+/* CS8900 */
+#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8)
+#define CS4_CS8900_MMIO_START 0x20000
+
/*
* The serial port definition structure.
*/
@@ -101,11 +108,29 @@
},
};
+static const struct resource mx31ads_cs8900_resources[] __initconst = {
+ DEFINE_RES_MEM(MX31_CS4_BASE_ADDR + CS4_CS8900_MMIO_START, SZ_64K),
+ DEFINE_RES_IRQ(EXPIO_INT_ENET_INT),
+};
+
+static const struct platform_device_info mx31ads_cs8900_devinfo __initconst = {
+ .name = "cs89x0",
+ .id = 0,
+ .res = mx31ads_cs8900_resources,
+ .num_res = ARRAY_SIZE(mx31ads_cs8900_resources),
+};
+
static int __init mxc_init_extuart(void)
{
return platform_device_register(&serial_device);
}
+static void __init mxc_init_ext_ethernet(void)
+{
+ platform_device_register_full(
+ (struct platform_device_info *)&mx31ads_cs8900_devinfo);
+}
+
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -492,12 +517,15 @@
mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
}
-/* static mappings */
+/*
+ * Static mappings, starting from the CS4 start address up to the start address
+ * of the CS8900.
+ */
static struct map_desc mx31ads_io_desc[] __initdata = {
{
.virtual = MX31_CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
- .length = MX31_CS4_SIZE / 2,
+ .length = CS4_CS8900_MMIO_START,
.type = MT_DEVICE
},
};
@@ -522,6 +550,7 @@
mxc_init_imx_uart();
mxc_init_i2c();
mxc_init_audio();
+ mxc_init_ext_ethernet();
}
static void __init mx31ads_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index f225262..96e042d 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -507,7 +507,7 @@
struct clk *clk = clk_get_sys("imx2-wdt.0", NULL);
if (!IS_ERR(clk))
- clk_enable(clk);
+ clk_prepare_enable(clk);
mxc_iomux_mode(MX31_PIN_WATCHDOG_RST__WATCHDOG_RST);
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 31807d2..8404ee7 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -34,31 +34,29 @@
{
unsigned long reg = 0;
- if (!need_resched())
- __asm__ __volatile__(
- /* disable I and D cache */
- "mrc p15, 0, %0, c1, c0, 0\n"
- "bic %0, %0, #0x00001000\n"
- "bic %0, %0, #0x00000004\n"
- "mcr p15, 0, %0, c1, c0, 0\n"
- /* invalidate I cache */
- "mov %0, #0\n"
- "mcr p15, 0, %0, c7, c5, 0\n"
- /* clear and invalidate D cache */
- "mov %0, #0\n"
- "mcr p15, 0, %0, c7, c14, 0\n"
- /* WFI */
- "mov %0, #0\n"
- "mcr p15, 0, %0, c7, c0, 4\n"
- "nop\n" "nop\n" "nop\n" "nop\n"
- "nop\n" "nop\n" "nop\n"
- /* enable I and D cache */
- "mrc p15, 0, %0, c1, c0, 0\n"
- "orr %0, %0, #0x00001000\n"
- "orr %0, %0, #0x00000004\n"
- "mcr p15, 0, %0, c1, c0, 0\n"
- : "=r" (reg));
- local_irq_enable();
+ __asm__ __volatile__(
+ /* disable I and D cache */
+ "mrc p15, 0, %0, c1, c0, 0\n"
+ "bic %0, %0, #0x00001000\n"
+ "bic %0, %0, #0x00000004\n"
+ "mcr p15, 0, %0, c1, c0, 0\n"
+ /* invalidate I cache */
+ "mov %0, #0\n"
+ "mcr p15, 0, %0, c7, c5, 0\n"
+ /* clear and invalidate D cache */
+ "mov %0, #0\n"
+ "mcr p15, 0, %0, c7, c14, 0\n"
+ /* WFI */
+ "mov %0, #0\n"
+ "mcr p15, 0, %0, c7, c0, 4\n"
+ "nop\n" "nop\n" "nop\n" "nop\n"
+ "nop\n" "nop\n" "nop\n"
+ /* enable I and D cache */
+ "mrc p15, 0, %0, c1, c0, 0\n"
+ "orr %0, %0, #0x00001000\n"
+ "orr %0, %0, #0x00000004\n"
+ "mcr p15, 0, %0, c1, c0, 0\n"
+ : "=r" (reg));
}
static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size,
@@ -134,8 +132,8 @@
{
mxc_set_cpu_type(MXC_CPU_MX31);
mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
- pm_idle = imx3_idle;
imx_ioremap = imx3_ioremap;
+ arm_pm_idle = imx3_idle;
}
void __init mx31_init_irq(void)
@@ -197,7 +195,7 @@
mxc_set_cpu_type(MXC_CPU_MX35);
mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
- pm_idle = imx3_idle;
+ arm_pm_idle = imx3_idle;
imx_ioremap = imx3_ioremap;
}
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index bc17dfe..49549a7 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -26,23 +26,17 @@
static void imx5_idle(void)
{
- if (!need_resched()) {
- /* gpc clock is needed for SRPG */
- if (gpc_dvfs_clk == NULL) {
- gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
- if (IS_ERR(gpc_dvfs_clk))
- goto err0;
- }
- clk_enable(gpc_dvfs_clk);
- mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
- if (tzic_enable_wake())
- goto err1;
- cpu_do_idle();
-err1:
- clk_disable(gpc_dvfs_clk);
+ /* gpc clock is needed for SRPG */
+ if (gpc_dvfs_clk == NULL) {
+ gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
+ if (IS_ERR(gpc_dvfs_clk))
+ return;
}
-err0:
- local_irq_enable();
+ clk_enable(gpc_dvfs_clk);
+ mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+ if (tzic_enable_wake() != 0)
+ cpu_do_idle();
+ clk_disable(gpc_dvfs_clk);
}
/*
@@ -108,7 +102,7 @@
mxc_set_cpu_type(MXC_CPU_MX51);
mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
- pm_idle = imx5_idle;
+ arm_pm_idle = imx5_idle;
}
void __init imx53_init_early(void)
diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c
index e455d2f..6fcffa7 100644
--- a/arch/arm/mach-imx/pm-imx27.c
+++ b/arch/arm/mach-imx/pm-imx27.c
@@ -10,7 +10,6 @@
#include <linux/kernel.h>
#include <linux/suspend.h>
#include <linux/io.h>
-#include <mach/system.h>
#include <mach/hardware.h>
static int mx27_suspend_enter(suspend_state_t state)
@@ -23,7 +22,7 @@
cscr &= 0xFFFFFFFC;
__raw_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
/* Executes WFI */
- arch_idle();
+ cpu_do_idle();
break;
default:
diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c
index 6dc0934..e26a9cb 100644
--- a/arch/arm/mach-imx/pm-imx5.c
+++ b/arch/arm/mach-imx/pm-imx5.c
@@ -89,7 +89,7 @@
static int mx5_suspend_prepare(void)
{
- return clk_enable(gpc_dvfs_clk);
+ return clk_prepare_enable(gpc_dvfs_clk);
}
static int mx5_suspend_enter(suspend_state_t state)
@@ -119,7 +119,7 @@
static void mx5_suspend_finish(void)
{
- clk_disable(gpc_dvfs_clk);
+ clk_disable_unprepare(gpc_dvfs_clk);
}
static int mx5_pm_valid(suspend_state_t state)
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 019f0ab..15b87f2 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -35,67 +35,23 @@
static struct amba_pl010_data integrator_uart_data;
-static struct amba_device rtc_device = {
- .dev = {
- .init_name = "mb:15",
- },
- .res = {
- .start = INTEGRATOR_RTC_BASE,
- .end = INTEGRATOR_RTC_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_RTCINT, NO_IRQ },
-};
+#define INTEGRATOR_RTC_IRQ { IRQ_RTCINT }
+#define INTEGRATOR_UART0_IRQ { IRQ_UARTINT0 }
+#define INTEGRATOR_UART1_IRQ { IRQ_UARTINT1 }
+#define KMI0_IRQ { IRQ_KMIINT0 }
+#define KMI1_IRQ { IRQ_KMIINT1 }
-static struct amba_device uart0_device = {
- .dev = {
- .init_name = "mb:16",
- .platform_data = &integrator_uart_data,
- },
- .res = {
- .start = INTEGRATOR_UART0_BASE,
- .end = INTEGRATOR_UART0_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_UARTINT0, NO_IRQ },
-};
+static AMBA_APB_DEVICE(rtc, "mb:15", 0,
+ INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL);
-static struct amba_device uart1_device = {
- .dev = {
- .init_name = "mb:17",
- .platform_data = &integrator_uart_data,
- },
- .res = {
- .start = INTEGRATOR_UART1_BASE,
- .end = INTEGRATOR_UART1_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_UARTINT1, NO_IRQ },
-};
+static AMBA_APB_DEVICE(uart0, "mb:16", 0,
+ INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, &integrator_uart_data);
-static struct amba_device kmi0_device = {
- .dev = {
- .init_name = "mb:18",
- },
- .res = {
- .start = KMI0_BASE,
- .end = KMI0_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_KMIINT0, NO_IRQ },
-};
+static AMBA_APB_DEVICE(uart1, "mb:17", 0,
+ INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, &integrator_uart_data);
-static struct amba_device kmi1_device = {
- .dev = {
- .init_name = "mb:19",
- },
- .res = {
- .start = KMI1_BASE,
- .end = KMI1_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_KMIINT1, NO_IRQ },
-};
+static AMBA_APB_DEVICE(kmi0, "mb:18", 0, KMI0_BASE, KMI0_IRQ, NULL);
+static AMBA_APB_DEVICE(kmi1, "mb:19", 0, KMI1_BASE, KMI1_IRQ, NULL);
static struct amba_device *amba_devs[] __initdata = {
&rtc_device,
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 8cbb75a..3e538da 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -401,24 +401,21 @@
pc_base = dev->resource.start + idev->offset;
- d = kzalloc(sizeof(struct amba_device), GFP_KERNEL);
+ d = amba_device_alloc(NULL, pc_base, SZ_4K);
if (!d)
continue;
dev_set_name(&d->dev, "lm%x:%5.5lx", dev->id, idev->offset >> 12);
d->dev.parent = &dev->dev;
- d->res.start = dev->resource.start + idev->offset;
- d->res.end = d->res.start + SZ_4K - 1;
- d->res.flags = IORESOURCE_MEM;
d->irq[0] = dev->irq;
d->irq[1] = dev->irq;
d->periphid = idev->id;
d->dev.platform_data = idev->platform_data;
- ret = amba_device_register(d, &dev->resource);
+ ret = amba_device_add(d, &dev->resource);
if (ret) {
dev_err(&d->dev, "unable to register device: %d\n", ret);
- kfree(d);
+ amba_device_put(d);
}
}
diff --git a/arch/arm/mach-integrator/include/mach/system.h b/arch/arm/mach-integrator/include/mach/system.h
deleted file mode 100644
index 901514e..0000000
--- a/arch/arm/mach-integrator/include/mach/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-integrator/include/mach/system.h
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index a8b6aa6..be9ead4 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -347,32 +347,14 @@
.gpio_cd = -1,
};
-static struct amba_device mmc_device = {
- .dev = {
- .init_name = "mb:1c",
- .platform_data = &mmc_data,
- },
- .res = {
- .start = INTEGRATOR_CP_MMC_BASE,
- .end = INTEGRATOR_CP_MMC_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 },
- .periphid = 0,
-};
+#define INTEGRATOR_CP_MMC_IRQS { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
+#define INTEGRATOR_CP_AACI_IRQS { IRQ_CP_AACIINT }
-static struct amba_device aaci_device = {
- .dev = {
- .init_name = "mb:1d",
- },
- .res = {
- .start = INTEGRATOR_CP_AACI_BASE,
- .end = INTEGRATOR_CP_AACI_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_CP_AACIINT, NO_IRQ },
- .periphid = 0,
-};
+static AMBA_APB_DEVICE(mmc, "mb:1c", 0, INTEGRATOR_CP_MMC_BASE,
+ INTEGRATOR_CP_MMC_IRQS, &mmc_data);
+
+static AMBA_APB_DEVICE(aaci, "mb:1d", 0, INTEGRATOR_CP_AACI_BASE,
+ INTEGRATOR_CP_AACI_IRQS, NULL);
/*
@@ -425,21 +407,8 @@
.remove = versatile_clcd_remove_dma,
};
-static struct amba_device clcd_device = {
- .dev = {
- .init_name = "mb:c0",
- .coherent_dma_mask = ~0,
- .platform_data = &clcd_data,
- },
- .res = {
- .start = INTCP_PA_CLCD_BASE,
- .end = INTCP_PA_CLCD_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .dma_mask = ~0,
- .irq = { IRQ_CP_CLCDCINT, NO_IRQ },
- .periphid = 0,
-};
+static AMBA_AHB_DEVICE(clcd, "mb:c0", 0, INTCP_PA_CLCD_BASE,
+ { IRQ_CP_CLCDCINT }, &clcd_data);
static struct amba_device *amba_devs[] __initdata = {
&mmc_device,
diff --git a/arch/arm/mach-iop13xx/include/mach/system.h b/arch/arm/mach-iop13xx/include/mach/system.h
deleted file mode 100644
index 1f31ed3..0000000
--- a/arch/arm/mach-iop13xx/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-iop13xx/include/mach/system.h
- *
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-iop32x/include/mach/system.h b/arch/arm/mach-iop32x/include/mach/system.h
deleted file mode 100644
index 4a88727..0000000
--- a/arch/arm/mach-iop32x/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/system.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-iop33x/include/mach/system.h b/arch/arm/mach-iop33x/include/mach/system.h
deleted file mode 100644
index 4f98e76..0000000
--- a/arch/arm/mach-iop33x/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/system.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-ixp2000/include/mach/system.h b/arch/arm/mach-ixp2000/include/mach/system.h
deleted file mode 100644
index a7fb08b..0000000
--- a/arch/arm/mach-ixp2000/include/mach/system.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/system.h
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyricht (C) 2003-2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c
index 0923bb9..7c1495e 100644
--- a/arch/arm/mach-ixp23xx/core.c
+++ b/arch/arm/mach-ixp23xx/core.c
@@ -441,6 +441,9 @@
void __init ixp23xx_sys_init(void)
{
+ /* by default, the idle code is disabled */
+ disable_hlt();
+
*IXP23XX_EXP_UNIT_FUSE |= 0xf;
platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices));
}
diff --git a/arch/arm/mach-ixp23xx/include/mach/system.h b/arch/arm/mach-ixp23xx/include/mach/system.h
deleted file mode 100644
index 277dda7..0000000
--- a/arch/arm/mach-ixp23xx/include/mach/system.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/system.h
- *
- * Copyright (C) 2003 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-#if 0
- if (!hlt_counter)
- cpu_do_idle();
-#endif
-}
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 3841ab4..a6329a0 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -236,6 +236,12 @@
{
int i = 0;
+ /*
+ * ixp4xx does not implement the XScale PWRMODE register
+ * so it must not call cpu_do_idle().
+ */
+ disable_hlt();
+
/* Route all sources to IRQ instead of FIQ */
*IXP4XX_ICLR = 0x0;
diff --git a/arch/arm/mach-ixp4xx/include/mach/system.h b/arch/arm/mach-ixp4xx/include/mach/system.h
deleted file mode 100644
index 140a9be..0000000
--- a/arch/arm/mach-ixp4xx/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/system.h
- *
- * Copyright (C) 2002 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-static inline void arch_idle(void)
-{
- /* ixp4xx does not implement the XScale PWRMODE register,
- * so it must not call cpu_do_idle() here.
- */
-#if 0
- cpu_do_idle();
-#endif
-}
diff --git a/arch/arm/mach-kirkwood/include/mach/system.h b/arch/arm/mach-kirkwood/include/mach/system.h
deleted file mode 100644
index 5fddde0..0000000
--- a/arch/arm/mach-kirkwood/include/mach/system.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-ks8695/include/mach/system.h b/arch/arm/mach-ks8695/include/mach/system.h
deleted file mode 100644
index 59fe992..0000000
--- a/arch/arm/mach-ks8695/include/mach/system.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-s3c2410/include/mach/system.h
- *
- * Copyright (C) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * KS8695 - System function defines and includes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks,
- */
- cpu_do_idle();
-
-}
-
-#endif
diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c
index 1e02751..473015a 100644
--- a/arch/arm/mach-lpc32xx/clock.c
+++ b/arch/arm/mach-lpc32xx/clock.c
@@ -719,6 +719,41 @@
.get_rate = local_return_parent_rate,
};
+static int adc_onoff_enable(struct clk *clk, int enable)
+{
+ u32 tmp;
+ u32 divider;
+
+ /* Use PERIPH_CLOCK */
+ tmp = __raw_readl(LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
+ tmp |= LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL;
+ /*
+ * Set clock divider so that we have equal to or less than
+ * 4.5MHz clock at ADC
+ */
+ divider = clk->get_rate(clk) / 4500000 + 1;
+ tmp |= divider;
+ __raw_writel(tmp, LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
+
+ /* synchronize rate of this clock w/ actual HW setting */
+ clk->rate = clk->get_rate(clk->parent) / divider;
+
+ if (enable == 0)
+ __raw_writel(0, clk->enable_reg);
+ else
+ __raw_writel(clk->enable_mask, clk->enable_reg);
+
+ return 0;
+}
+
+static struct clk clk_adc = {
+ .parent = &clk_pclk,
+ .enable = adc_onoff_enable,
+ .enable_reg = LPC32XX_CLKPWR_ADC_CLK_CTRL,
+ .enable_mask = LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN,
+ .get_rate = local_return_parent_rate,
+};
+
static int mmc_onoff_enable(struct clk *clk, int enable)
{
u32 tmp;
@@ -1075,6 +1110,7 @@
_REGISTER_CLOCK("dev:ssp1", NULL, clk_ssp1)
_REGISTER_CLOCK("lpc32xx_keys.0", NULL, clk_kscan)
_REGISTER_CLOCK("lpc32xx-nand.0", "nand_ck", clk_nand)
+ _REGISTER_CLOCK("lpc32xx-adc", NULL, clk_adc)
_REGISTER_CLOCK("tbd", "i2s0_ck", clk_i2s0)
_REGISTER_CLOCK("tbd", "i2s1_ck", clk_i2s1)
_REGISTER_CLOCK("ts-lpc32xx", NULL, clk_tsc)
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c
index 369b152..6c76bb3 100644
--- a/arch/arm/mach-lpc32xx/common.c
+++ b/arch/arm/mach-lpc32xx/common.c
@@ -138,6 +138,28 @@
};
/*
+ * ADC support
+ */
+static struct resource adc_resources[] = {
+ {
+ .start = LPC32XX_ADC_BASE,
+ .end = LPC32XX_ADC_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_LPC32XX_TS_IRQ,
+ .end = IRQ_LPC32XX_TS_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device lpc32xx_adc_device = {
+ .name = "lpc32xx-adc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(adc_resources),
+ .resource = adc_resources,
+};
+
+/*
* Returns the unique ID for the device
*/
void lpc32xx_get_uid(u32 devid[4])
diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h
index 4b4e700..04b7273 100644
--- a/arch/arm/mach-lpc32xx/common.h
+++ b/arch/arm/mach-lpc32xx/common.h
@@ -29,6 +29,7 @@
extern struct platform_device lpc32xx_i2c1_device;
extern struct platform_device lpc32xx_i2c2_device;
extern struct platform_device lpc32xx_tsc_device;
+extern struct platform_device lpc32xx_adc_device;
extern struct platform_device lpc32xx_rtc_device;
/*
diff --git a/arch/arm/mach-lpc32xx/include/mach/system.h b/arch/arm/mach-lpc32xx/include/mach/system.h
deleted file mode 100644
index bf176c9..0000000
--- a/arch/arm/mach-lpc32xx/include/mach/system.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/include/mach/system.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index bfee5b4..a539f4f 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -149,20 +149,8 @@
.remove = lpc32xx_clcd_remove,
};
-static struct amba_device lpc32xx_clcd_device = {
- .dev = {
- .coherent_dma_mask = ~0,
- .init_name = "dev:clcd",
- .platform_data = &lpc32xx_clcd_data,
- },
- .res = {
- .start = LPC32XX_LCD_BASE,
- .end = (LPC32XX_LCD_BASE + SZ_4K - 1),
- .flags = IORESOURCE_MEM,
- },
- .dma_mask = ~0,
- .irq = {IRQ_LPC32XX_LCD, NO_IRQ},
-};
+static AMBA_AHB_DEVICE(lpc32xx_clcd, "dev:clcd", 0,
+ LPC32XX_LCD_BASE, { IRQ_LPC32XX_LCD }, &lpc32xx_clcd_data);
/*
* AMBA SSP (SPI)
@@ -191,20 +179,8 @@
.enable_dma = 0,
};
-static struct amba_device lpc32xx_ssp0_device = {
- .dev = {
- .coherent_dma_mask = ~0,
- .init_name = "dev:ssp0",
- .platform_data = &lpc32xx_ssp0_data,
- },
- .res = {
- .start = LPC32XX_SSP0_BASE,
- .end = (LPC32XX_SSP0_BASE + SZ_4K - 1),
- .flags = IORESOURCE_MEM,
- },
- .dma_mask = ~0,
- .irq = {IRQ_LPC32XX_SSP0, NO_IRQ},
-};
+static AMBA_APB_DEVICE(lpc32xx_ssp0, "dev:ssp0", 0,
+ LPC32XX_SSP0_BASE, { IRQ_LPC32XX_SSP0 }, &lpc32xx_ssp0_data);
/* AT25 driver registration */
static int __init phy3250_spi_board_register(void)
@@ -276,6 +252,7 @@
&lpc32xx_i2c2_device,
&lpc32xx_watchdog_device,
&lpc32xx_gpio_led_device,
+ &lpc32xx_adc_device,
};
static struct amba_device *amba_devs[] __initdata = {
diff --git a/arch/arm/mach-mmp/include/mach/system.h b/arch/arm/mach-mmp/include/mach/system.h
deleted file mode 100644
index 1d001ea..0000000
--- a/arch/arm/mach-mmp/include/mach/system.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/system.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_SYSTEM_H
-#define __ASM_MACH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-#endif /* __ASM_MACH_SYSTEM_H */
diff --git a/arch/arm/mach-msm/idle.S b/arch/arm/mach-msm/idle.S
deleted file mode 100644
index 6a94f05..0000000
--- a/arch/arm/mach-msm/idle.S
+++ /dev/null
@@ -1,36 +0,0 @@
-/* arch/arm/mach-msm/include/mach/idle.S
- *
- * Idle processing for MSM7K - work around bugs with SWFI.
- *
- * Copyright (c) 2007 QUALCOMM Incorporated.
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-ENTRY(arch_idle)
-#ifdef CONFIG_MSM7X00A_IDLE
- mrc p15, 0, r1, c1, c0, 0 /* read current CR */
- bic r0, r1, #(1 << 2) /* clear dcache bit */
- bic r0, r0, #(1 << 12) /* clear icache bit */
- mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */
-
- mov r0, #0 /* prepare wfi value */
- mcr p15, 0, r0, c7, c10, 0 /* flush the cache */
- mcr p15, 0, r0, c7, c10, 4 /* memory barrier */
- mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */
-
- mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */
-#endif
- mov pc, lr
diff --git a/arch/arm/mach-msm/idle.c b/arch/arm/mach-msm/idle.c
new file mode 100644
index 0000000..0c9e13c
--- /dev/null
+++ b/arch/arm/mach-msm/idle.c
@@ -0,0 +1,49 @@
+/* arch/arm/mach-msm/idle.c
+ *
+ * Idle processing for MSM7K - work around bugs with SWFI.
+ *
+ * Copyright (c) 2007 QUALCOMM Incorporated.
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <asm/system.h>
+
+static void msm_idle(void)
+{
+#ifdef CONFIG_MSM7X00A_IDLE
+ asm volatile (
+
+ "mrc p15, 0, r1, c1, c0, 0 /* read current CR */ \n\t"
+ "bic r0, r1, #(1 << 2) /* clear dcache bit */ \n\t"
+ "bic r0, r0, #(1 << 12) /* clear icache bit */ \n\t"
+ "mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */ \n\t"
+
+ "mov r0, #0 /* prepare wfi value */ \n\t"
+ "mcr p15, 0, r0, c7, c10, 0 /* flush the cache */ \n\t"
+ "mcr p15, 0, r0, c7, c10, 4 /* memory barrier */ \n\t"
+ "mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */ \n\t"
+
+ "mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */ \n\t"
+
+ : : : "r0","r1" );
+#endif
+}
+
+static int __init msm_idle_init(void)
+{
+ arm_pm_idle = msm_idle;
+ return 0;
+}
+
+arch_initcall(msm_idle_init);
diff --git a/arch/arm/mach-msm/include/mach/system.h b/arch/arm/mach-msm/include/mach/system.h
index 311db2b..f5fb2ec 100644
--- a/arch/arm/mach-msm/include/mach/system.h
+++ b/arch/arm/mach-msm/include/mach/system.h
@@ -12,7 +12,6 @@
* GNU General Public License for more details.
*
*/
-void arch_idle(void);
/* low level hardware reset hook -- for example, hitting the
* PSHOLD line on the PMIC to hard reset the system
diff --git a/arch/arm/mach-mv78xx0/include/mach/system.h b/arch/arm/mach-mv78xx0/include/mach/system.h
deleted file mode 100644
index 8c3a538..0000000
--- a/arch/arm/mach-mv78xx0/include/mach/system.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c
index e12e112..aec3471 100644
--- a/arch/arm/mach-mxs/clock-mx23.c
+++ b/arch/arm/mach-mxs/clock-mx23.c
@@ -456,6 +456,7 @@
_REGISTER_CLOCK("mxs-pwm.3", NULL, pwm_clk)
_REGISTER_CLOCK("mxs-pwm.4", NULL, pwm_clk)
_REGISTER_CLOCK("imx23-fb", NULL, lcdif_clk)
+ _REGISTER_CLOCK("imx23-gpmi-nand", NULL, gpmi_clk)
};
static int clk_misc_init(void)
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index 5d68e41..8dd7b02 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -643,6 +643,7 @@
_REGISTER_CLOCK("duart", NULL, uart_clk)
_REGISTER_CLOCK("imx28-fec.0", NULL, fec_clk)
_REGISTER_CLOCK("imx28-fec.1", NULL, fec_clk)
+ _REGISTER_CLOCK("imx28-gpmi-nand", NULL, gpmi_clk)
_REGISTER_CLOCK("mxs-auart.0", NULL, uart_clk)
_REGISTER_CLOCK("mxs-auart.1", NULL, uart_clk)
_REGISTER_CLOCK("mxs-auart.2", NULL, uart_clk)
diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h
index 3fa651d..4d1329d 100644
--- a/arch/arm/mach-mxs/devices-mx23.h
+++ b/arch/arm/mach-mxs/devices-mx23.h
@@ -21,6 +21,10 @@
#define mx23_add_auart0() mx23_add_auart(0)
#define mx23_add_auart1() mx23_add_auart(1)
+extern const struct mxs_gpmi_nand_data mx23_gpmi_nand_data __initconst;
+#define mx23_add_gpmi_nand(pdata) \
+ mxs_add_gpmi_nand(pdata, &mx23_gpmi_nand_data)
+
extern const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst;
#define mx23_add_mxs_mmc(id, pdata) \
mxs_add_mxs_mmc(&mx23_mxs_mmc_data[id], pdata)
diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
index 4f50094..9dbeae1 100644
--- a/arch/arm/mach-mxs/devices-mx28.h
+++ b/arch/arm/mach-mxs/devices-mx28.h
@@ -34,6 +34,10 @@
#define mx28_add_flexcan0(pdata) mx28_add_flexcan(0, pdata)
#define mx28_add_flexcan1(pdata) mx28_add_flexcan(1, pdata)
+extern const struct mxs_gpmi_nand_data mx28_gpmi_nand_data __initconst;
+#define mx28_add_gpmi_nand(pdata) \
+ mxs_add_gpmi_nand(pdata, &mx28_gpmi_nand_data)
+
extern const struct mxs_mxs_i2c_data mx28_mxs_i2c_data[] __initconst;
#define mx28_add_mxs_i2c(id) mxs_add_mxs_i2c(&mx28_mxs_i2c_data[id])
diff --git a/arch/arm/mach-mxs/devices.c b/arch/arm/mach-mxs/devices.c
index fe3e847..01faffe 100644
--- a/arch/arm/mach-mxs/devices.c
+++ b/arch/arm/mach-mxs/devices.c
@@ -77,16 +77,18 @@
int __init mxs_add_amba_device(const struct amba_device *dev)
{
- struct amba_device *adev = kmalloc(sizeof(*adev), GFP_KERNEL);
+ struct amba_device *adev = amba_device_alloc(dev->dev.init_name,
+ dev->res.start, resource_size(&dev->res));
if (!adev) {
pr_err("%s: failed to allocate memory", __func__);
return -ENOMEM;
}
- *adev = *dev;
+ adev->irq[0] = dev->irq[0];
+ adev->irq[1] = dev->irq[1];
- return amba_device_register(adev, &iomem_resource);
+ return amba_device_add(adev, &iomem_resource);
}
struct device mxs_apbh_bus = {
diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig
index 18b6bf5..b8913df 100644
--- a/arch/arm/mach-mxs/devices/Kconfig
+++ b/arch/arm/mach-mxs/devices/Kconfig
@@ -12,6 +12,9 @@
select HAVE_CAN_FLEXCAN if CAN
bool
+config MXS_HAVE_PLATFORM_GPMI_NAND
+ bool
+
config MXS_HAVE_PLATFORM_MXS_I2C
bool
diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile
index f52e3e5..c8f5c95 100644
--- a/arch/arm/mach-mxs/devices/Makefile
+++ b/arch/arm/mach-mxs/devices/Makefile
@@ -3,6 +3,7 @@
obj-y += platform-dma.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
+obj-$(CONFIG_MXS_HAVE_PLATFORM_GPMI_NAND) += platform-gpmi-nand.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o
diff --git a/arch/arm/mach-mxs/devices/amba-duart.c b/arch/arm/mach-mxs/devices/amba-duart.c
index a559db0..a5479f7 100644
--- a/arch/arm/mach-mxs/devices/amba-duart.c
+++ b/arch/arm/mach-mxs/devices/amba-duart.c
@@ -23,7 +23,7 @@
.end = (soc ## _DUART_BASE_ADDR) + SZ_8K - 1, \
.flags = IORESOURCE_MEM, \
}, \
- .irq = {soc ## _INT_DUART, NO_IRQ}, \
+ .irq = {soc ## _INT_DUART}, \
}
#ifdef CONFIG_SOC_IMX23
diff --git a/arch/arm/mach-mxs/devices/platform-gpmi-nand.c b/arch/arm/mach-mxs/devices/platform-gpmi-nand.c
new file mode 100644
index 0000000..3e22df5
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/platform-gpmi-nand.c
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#include <asm/sizes.h>
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+#include <linux/dma-mapping.h>
+
+#ifdef CONFIG_SOC_IMX23
+const struct mxs_gpmi_nand_data mx23_gpmi_nand_data __initconst = {
+ .devid = "imx23-gpmi-nand",
+ .res = {
+ /* GPMI */
+ DEFINE_RES_MEM_NAMED(MX23_GPMI_BASE_ADDR, SZ_8K,
+ GPMI_NAND_GPMI_REGS_ADDR_RES_NAME),
+ DEFINE_RES_IRQ_NAMED(MX23_INT_GPMI_ATTENTION,
+ GPMI_NAND_GPMI_INTERRUPT_RES_NAME),
+ /* BCH */
+ DEFINE_RES_MEM_NAMED(MX23_BCH_BASE_ADDR, SZ_8K,
+ GPMI_NAND_BCH_REGS_ADDR_RES_NAME),
+ DEFINE_RES_IRQ_NAMED(MX23_INT_BCH,
+ GPMI_NAND_BCH_INTERRUPT_RES_NAME),
+ /* DMA */
+ DEFINE_RES_NAMED(MX23_DMA_GPMI0,
+ MX23_DMA_GPMI3 - MX23_DMA_GPMI0 + 1,
+ GPMI_NAND_DMA_CHANNELS_RES_NAME,
+ IORESOURCE_DMA),
+ DEFINE_RES_IRQ_NAMED(MX23_INT_GPMI_DMA,
+ GPMI_NAND_DMA_INTERRUPT_RES_NAME),
+ },
+};
+#endif
+
+#ifdef CONFIG_SOC_IMX28
+const struct mxs_gpmi_nand_data mx28_gpmi_nand_data __initconst = {
+ .devid = "imx28-gpmi-nand",
+ .res = {
+ /* GPMI */
+ DEFINE_RES_MEM_NAMED(MX28_GPMI_BASE_ADDR, SZ_8K,
+ GPMI_NAND_GPMI_REGS_ADDR_RES_NAME),
+ DEFINE_RES_IRQ_NAMED(MX28_INT_GPMI,
+ GPMI_NAND_GPMI_INTERRUPT_RES_NAME),
+ /* BCH */
+ DEFINE_RES_MEM_NAMED(MX28_BCH_BASE_ADDR, SZ_8K,
+ GPMI_NAND_BCH_REGS_ADDR_RES_NAME),
+ DEFINE_RES_IRQ_NAMED(MX28_INT_BCH,
+ GPMI_NAND_BCH_INTERRUPT_RES_NAME),
+ /* DMA */
+ DEFINE_RES_NAMED(MX28_DMA_GPMI0,
+ MX28_DMA_GPMI7 - MX28_DMA_GPMI0 + 1,
+ GPMI_NAND_DMA_CHANNELS_RES_NAME,
+ IORESOURCE_DMA),
+ DEFINE_RES_IRQ_NAMED(MX28_INT_GPMI_DMA,
+ GPMI_NAND_DMA_INTERRUPT_RES_NAME),
+ },
+};
+#endif
+
+struct platform_device *__init
+mxs_add_gpmi_nand(const struct gpmi_nand_platform_data *pdata,
+ const struct mxs_gpmi_nand_data *data)
+{
+ return mxs_add_platform_device_dmamask(data->devid, -1,
+ data->res, GPMI_NAND_RES_SIZE,
+ pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}
diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
index dc369c1..f2e3839 100644
--- a/arch/arm/mach-mxs/include/mach/devices-common.h
+++ b/arch/arm/mach-mxs/include/mach/devices-common.h
@@ -66,6 +66,16 @@
const struct mxs_flexcan_data *data,
const struct flexcan_platform_data *pdata);
+/* gpmi-nand */
+#include <linux/mtd/gpmi-nand.h>
+struct mxs_gpmi_nand_data {
+ const char *devid;
+ const struct resource res[GPMI_NAND_RES_SIZE];
+};
+struct platform_device *__init
+mxs_add_gpmi_nand(const struct gpmi_nand_platform_data *pdata,
+ const struct mxs_gpmi_nand_data *data);
+
/* i2c */
struct mxs_mxs_i2c_data {
int id;
diff --git a/arch/arm/mach-mxs/include/mach/system.h b/arch/arm/mach-mxs/include/mach/system.h
deleted file mode 100644
index e7ad1bb..0000000
--- a/arch/arm/mach-mxs/include/mach/system.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_MXS_SYSTEM_H__
-#define __MACH_MXS_SYSTEM_H__
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif /* __MACH_MXS_SYSTEM_H__ */
diff --git a/arch/arm/mach-mxs/pm.c b/arch/arm/mach-mxs/pm.c
index fb042da..a9b4bbc 100644
--- a/arch/arm/mach-mxs/pm.c
+++ b/arch/arm/mach-mxs/pm.c
@@ -15,13 +15,12 @@
#include <linux/kernel.h>
#include <linux/suspend.h>
#include <linux/io.h>
-#include <mach/system.h>
static int mxs_suspend_enter(suspend_state_t state)
{
switch (state) {
case PM_SUSPEND_MEM:
- arch_idle();
+ cpu_do_idle();
break;
default:
diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c
index b991323..2cdf6ef 100644
--- a/arch/arm/mach-netx/fb.c
+++ b/arch/arm/mach-netx/fb.c
@@ -92,18 +92,7 @@
{
}
-static struct amba_device fb_device = {
- .dev = {
- .init_name = "fb",
- .coherent_dma_mask = ~0,
- },
- .res = {
- .start = 0x00104000,
- .end = 0x00104fff,
- .flags = IORESOURCE_MEM,
- },
- .irq = { NETX_IRQ_LCD, NO_IRQ },
-};
+static AMBA_AHB_DEVICE(fb, "fb", 0, 0x00104000, { NETX_IRQ_LCD }, NULL);
int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel)
{
diff --git a/arch/arm/mach-netx/include/mach/system.h b/arch/arm/mach-netx/include/mach/system.h
deleted file mode 100644
index b38fa36..0000000
--- a/arch/arm/mach-netx/include/mach/system.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-netx/include/mach/system.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
-
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 7c878bf..f6f74ad 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -185,20 +185,11 @@
#endif
}
-#define __MEM_4K_RESOURCE(x) \
- .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+static AMBA_APB_DEVICE(uart0, "uart0", 0, NOMADIK_UART0_BASE,
+ { IRQ_UART0 }, NULL);
-static struct amba_device uart0_device = {
- .dev = { .init_name = "uart0" },
- __MEM_4K_RESOURCE(NOMADIK_UART0_BASE),
- .irq = {IRQ_UART0, NO_IRQ},
-};
-
-static struct amba_device uart1_device = {
- .dev = { .init_name = "uart1" },
- __MEM_4K_RESOURCE(NOMADIK_UART1_BASE),
- .irq = {IRQ_UART1, NO_IRQ},
-};
+static AMBA_APB_DEVICE(uart1, "uart1", 0, NOMADIK_UART1_BASE,
+ { IRQ_UART1 }, NULL);
static struct amba_device *amba_devs[] __initdata = {
&uart0_device,
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 65df7b4..27f43a4 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -97,12 +97,7 @@
GPIO_DEVICE(3),
};
-static struct amba_device cpu8815_amba_rng = {
- .dev = {
- .init_name = "rng",
- },
- __MEM_4K_RESOURCE(NOMADIK_RNG_BASE),
-};
+static AMBA_APB_DEVICE(cpu8815_amba_rng, "rng", 0, NOMADIK_RNG_BASE, { }, NULL);
static struct platform_device *platform_devs[] __initdata = {
cpu8815_platform_gpio + 0,
@@ -112,7 +107,7 @@
};
static struct amba_device *amba_devs[] __initdata = {
- &cpu8815_amba_rng
+ &cpu8815_amba_rng_device
};
static int __init cpu8815_init(void)
diff --git a/arch/arm/mach-nomadik/include/mach/system.h b/arch/arm/mach-nomadik/include/mach/system.h
deleted file mode 100644
index 25e198b..0000000
--- a/arch/arm/mach-nomadik/include/mach/system.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * mach-nomadik/include/mach/system.h
- *
- * Copyright (C) 2008 STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-omap1/include/mach/system.h b/arch/arm/mach-omap1/include/mach/system.h
deleted file mode 100644
index a6c1b3a..0000000
--- a/arch/arm/mach-omap1/include/mach/system.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/system.h
- */
-
-#include <plat/system.h>
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 89ea20c..0c2c366 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -42,9 +42,9 @@
#include <linux/sysfs.h>
#include <linux/module.h>
#include <linux/io.h>
+#include <linux/atomic.h>
#include <asm/irq.h>
-#include <linux/atomic.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
@@ -108,13 +108,7 @@
__u32 use_idlect1 = arm_idlect1_mask;
int do_sleep = 0;
- local_irq_disable();
local_fiq_disable();
- if (need_resched()) {
- local_fiq_enable();
- local_irq_enable();
- return;
- }
#if defined(CONFIG_OMAP_MPU_TIMER) && !defined(CONFIG_OMAP_DM_TIMER)
#warning Enable 32kHz OS timer in order to allow sleep states in idle
@@ -157,14 +151,12 @@
omap_writel(saved_idlect1, ARM_IDLECT1);
local_fiq_enable();
- local_irq_enable();
return;
}
omap_sram_suspend(omap_readl(ARM_IDLECT1),
omap_readl(ARM_IDLECT2));
local_fiq_enable();
- local_irq_enable();
}
/*
@@ -583,8 +575,6 @@
#endif /* DEBUG && CONFIG_PROC_FS */
-static void (*saved_idle)(void) = NULL;
-
/*
* omap_pm_prepare - Do preliminary suspend work.
*
@@ -592,8 +582,7 @@
static int omap_pm_prepare(void)
{
/* We cannot sleep in idle until we have resumed */
- saved_idle = pm_idle;
- pm_idle = NULL;
+ disable_hlt();
return 0;
}
@@ -630,7 +619,7 @@
static void omap_pm_finish(void)
{
- pm_idle = saved_idle;
+ enable_hlt();
}
@@ -687,7 +676,7 @@
return -ENODEV;
}
- pm_idle = omap1_pm_idle;
+ arm_pm_idle = omap1_pm_idle;
if (cpu_is_omap7xx())
setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq);
diff --git a/arch/arm/mach-omap2/emu.c b/arch/arm/mach-omap2/emu.c
index 9c442e2..ce91aad 100644
--- a/arch/arm/mach-omap2/emu.c
+++ b/arch/arm/mach-omap2/emu.c
@@ -30,29 +30,8 @@
#define ETB_BASE (L4_EMU_34XX_PHYS + 0x1b000)
#define DAPCTL (L4_EMU_34XX_PHYS + 0x1d000)
-static struct amba_device omap3_etb_device = {
- .dev = {
- .init_name = "etb",
- },
- .res = {
- .start = ETB_BASE,
- .end = ETB_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .periphid = 0x000bb907,
-};
-
-static struct amba_device omap3_etm_device = {
- .dev = {
- .init_name = "etm",
- },
- .res = {
- .start = ETM_BASE,
- .end = ETM_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .periphid = 0x102bb921,
-};
+static AMBA_APB_DEVICE(omap3_etb, "etb", 0x000bb907, ETB_BASE, { }, NULL);
+static AMBA_APB_DEVICE(omap3_etm, "etm", 0x102bb921, ETM_BASE, { }, NULL);
static int __init emu_init(void)
{
@@ -66,4 +45,3 @@
}
subsys_initcall(emu_init);
-
diff --git a/arch/arm/mach-omap2/include/mach/system.h b/arch/arm/mach-omap2/include/mach/system.h
deleted file mode 100644
index d488721..0000000
--- a/arch/arm/mach-omap2/include/mach/system.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap2/include/mach/system.h
- */
-
-#include <plat/system.h>
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index 23de98d..a4eb5c2 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -226,7 +226,6 @@
static void omap2_pm_idle(void)
{
- local_irq_disable();
local_fiq_disable();
if (!omap2_can_sleep()) {
@@ -243,7 +242,6 @@
out:
local_fiq_enable();
- local_irq_enable();
}
#ifdef CONFIG_SUSPEND
@@ -462,7 +460,7 @@
}
suspend_set_ops(&omap_pm_ops);
- pm_idle = omap2_pm_idle;
+ arm_pm_idle = omap2_pm_idle;
return 0;
}
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index fc69875..b77df73 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -418,10 +418,9 @@
static void omap3_pm_idle(void)
{
- local_irq_disable();
local_fiq_disable();
- if (omap_irq_pending() || need_resched())
+ if (omap_irq_pending())
goto out;
trace_power_start(POWER_CSTATE, 1, smp_processor_id());
@@ -434,7 +433,6 @@
out:
local_fiq_enable();
- local_irq_enable();
}
#ifdef CONFIG_SUSPEND
@@ -848,7 +846,7 @@
suspend_set_ops(&omap_pm_ops);
#endif /* CONFIG_SUSPEND */
- pm_idle = omap3_pm_idle;
+ arm_pm_idle = omap3_pm_idle;
omap3_idle_init();
/*
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index c264ef7..c840689 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -173,18 +173,16 @@
* omap_default_idle - OMAP4 default ilde routine.'
*
* Implements OMAP4 memory, IO ordering requirements which can't be addressed
- * with default arch_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and
+ * with default cpu_do_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and
* by secondary CPU with CONFIG_CPUIDLE.
*/
static void omap_default_idle(void)
{
- local_irq_disable();
local_fiq_disable();
omap_do_wfi();
local_fiq_enable();
- local_irq_enable();
}
/**
@@ -255,8 +253,8 @@
suspend_set_ops(&omap_pm_ops);
#endif /* CONFIG_SUSPEND */
- /* Overwrite the default arch_idle() */
- pm_idle = omap_default_idle;
+ /* Overwrite the default cpu_do_idle() */
+ arm_pm_idle = omap_default_idle;
omap4_idle_init();
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 860118a..873b51d 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -24,7 +24,6 @@
#include <linux/interrupt.h>
#include <linux/slab.h>
-#include <mach/system.h>
#include <plat/common.h>
#include <plat/prcm.h>
#include <plat/irqs.h>
diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h
deleted file mode 100644
index 825a265..0000000
--- a/arch/arm/mach-orion5x/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/system.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-picoxcell/include/mach/system.h b/arch/arm/mach-picoxcell/include/mach/system.h
deleted file mode 100644
index 1a5d8cb..0000000
--- a/arch/arm/mach-picoxcell/include/mach/system.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching and wait for interrupt
- * tricks.
- */
- cpu_do_idle();
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-pnx4008/include/mach/system.h b/arch/arm/mach-pnx4008/include/mach/system.h
deleted file mode 100644
index 60cfe71..0000000
--- a/arch/arm/mach-pnx4008/include/mach/system.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/system.h
- *
- * Copyright (C) 2003 Philips Semiconductors
- * Copyright (C) 2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-prima2/include/mach/system.h b/arch/arm/mach-prima2/include/mach/system.h
deleted file mode 100644
index 2c7d2a9..0000000
--- a/arch/arm/mach-prima2/include/mach/system.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-prima2/include/mach/system.h
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef __MACH_SYSTEM_H__
-#define __MACH_SYSTEM_H__
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/system.h b/arch/arm/mach-pxa/include/mach/system.h
deleted file mode 100644
index c5afacd..0000000
--- a/arch/arm/mach-pxa/include/mach/system.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/system.h
- *
- * Author: Nicolas Pitre
- * Created: Jun 15, 2001
- * Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 735b57a..f8f2c0a 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -28,21 +28,11 @@
#include <asm/setup.h>
#include <asm/leds.h>
-#define AMBA_DEVICE(name,busid,base,plat) \
-static struct amba_device name##_device = { \
- .dev = { \
- .coherent_dma_mask = ~0, \
- .init_name = busid, \
- .platform_data = plat, \
- }, \
- .res = { \
- .start = REALVIEW_##base##_BASE, \
- .end = (REALVIEW_##base##_BASE) + SZ_4K - 1, \
- .flags = IORESOURCE_MEM, \
- }, \
- .dma_mask = ~0, \
- .irq = base##_IRQ, \
-}
+#define APB_DEVICE(name, busid, base, plat) \
+static AMBA_APB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat)
+
+#define AHB_DEVICE(name, busid, base, plat) \
+static AMBA_AHB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat)
struct machine_desc;
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
index 5c3c625..708f841 100644
--- a/arch/arm/mach-realview/include/mach/irqs-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
@@ -40,6 +40,7 @@
#define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13)
#define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14)
#define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */
+#define IRQ_DC1176_GPIO0 (IRQ_DC1176_GIC_START + 16)
#define IRQ_DC1176_SSP (IRQ_DC1176_GIC_START + 17) /* SSP port */
#define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */
#define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */
@@ -73,7 +74,6 @@
#define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */
#define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */
-#define IRQ_PB1176_GPIO0 -1
#define IRQ_PB1176_SCTL -1
#define NR_GIC_PB1176 2
diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h
deleted file mode 100644
index 471b671..0000000
--- a/arch/arm/mach-realview/include/mach/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-realview/include/mach/system.h
- *
- * Copyright (C) 2003 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 9578145..157e1bc6 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -135,63 +135,63 @@
/*
* These devices are connected via the core APB bridge
*/
-#define GPIO2_IRQ { IRQ_EB_GPIO2, NO_IRQ }
-#define GPIO3_IRQ { IRQ_EB_GPIO3, NO_IRQ }
+#define GPIO2_IRQ { IRQ_EB_GPIO2 }
+#define GPIO3_IRQ { IRQ_EB_GPIO3 }
-#define AACI_IRQ { IRQ_EB_AACI, NO_IRQ }
+#define AACI_IRQ { IRQ_EB_AACI }
#define MMCI0_IRQ { IRQ_EB_MMCI0A, IRQ_EB_MMCI0B }
-#define KMI0_IRQ { IRQ_EB_KMI0, NO_IRQ }
-#define KMI1_IRQ { IRQ_EB_KMI1, NO_IRQ }
+#define KMI0_IRQ { IRQ_EB_KMI0 }
+#define KMI1_IRQ { IRQ_EB_KMI1 }
/*
* These devices are connected directly to the multi-layer AHB switch
*/
-#define EB_SMC_IRQ { NO_IRQ, NO_IRQ }
-#define MPMC_IRQ { NO_IRQ, NO_IRQ }
-#define EB_CLCD_IRQ { IRQ_EB_CLCD, NO_IRQ }
-#define DMAC_IRQ { IRQ_EB_DMA, NO_IRQ }
+#define EB_SMC_IRQ { }
+#define MPMC_IRQ { }
+#define EB_CLCD_IRQ { IRQ_EB_CLCD }
+#define DMAC_IRQ { IRQ_EB_DMA }
/*
* These devices are connected via the core APB bridge
*/
-#define SCTL_IRQ { NO_IRQ, NO_IRQ }
-#define EB_WATCHDOG_IRQ { IRQ_EB_WDOG, NO_IRQ }
-#define EB_GPIO0_IRQ { IRQ_EB_GPIO0, NO_IRQ }
-#define GPIO1_IRQ { IRQ_EB_GPIO1, NO_IRQ }
-#define EB_RTC_IRQ { IRQ_EB_RTC, NO_IRQ }
+#define SCTL_IRQ { }
+#define EB_WATCHDOG_IRQ { IRQ_EB_WDOG }
+#define EB_GPIO0_IRQ { IRQ_EB_GPIO0 }
+#define GPIO1_IRQ { IRQ_EB_GPIO1 }
+#define EB_RTC_IRQ { IRQ_EB_RTC }
/*
* These devices are connected via the DMA APB bridge
*/
-#define SCI_IRQ { IRQ_EB_SCI, NO_IRQ }
-#define EB_UART0_IRQ { IRQ_EB_UART0, NO_IRQ }
-#define EB_UART1_IRQ { IRQ_EB_UART1, NO_IRQ }
-#define EB_UART2_IRQ { IRQ_EB_UART2, NO_IRQ }
-#define EB_UART3_IRQ { IRQ_EB_UART3, NO_IRQ }
-#define EB_SSP_IRQ { IRQ_EB_SSP, NO_IRQ }
+#define SCI_IRQ { IRQ_EB_SCI }
+#define EB_UART0_IRQ { IRQ_EB_UART0 }
+#define EB_UART1_IRQ { IRQ_EB_UART1 }
+#define EB_UART2_IRQ { IRQ_EB_UART2 }
+#define EB_UART3_IRQ { IRQ_EB_UART3 }
+#define EB_SSP_IRQ { IRQ_EB_SSP }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
-AMBA_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL);
+APB_DEVICE(aaci, "fpga:aaci", AACI, NULL);
+APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
+APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
+APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
+APB_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:smc", EB_SMC, NULL);
-AMBA_DEVICE(clcd, "dev:clcd", EB_CLCD, &clcd_plat_data);
-AMBA_DEVICE(dmac, "dev:dmac", DMAC, NULL);
-AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:wdog", EB_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(rtc, "dev:rtc", EB_RTC, NULL);
-AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:ssp0", EB_SSP, &ssp0_plat_data);
+AHB_DEVICE(smc, "dev:smc", EB_SMC, NULL);
+AHB_DEVICE(clcd, "dev:clcd", EB_CLCD, &clcd_plat_data);
+AHB_DEVICE(dmac, "dev:dmac", DMAC, NULL);
+AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL);
+APB_DEVICE(wdog, "dev:wdog", EB_WATCHDOG, NULL);
+APB_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data);
+APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
+APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
+APB_DEVICE(rtc, "dev:rtc", EB_RTC, NULL);
+APB_DEVICE(sci0, "dev:sci0", SCI, NULL);
+APB_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
+APB_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
+APB_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
+APB_DEVICE(ssp0, "dev:ssp0", EB_SSP, &ssp0_plat_data);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index e4abe94..b1d7caf 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -132,50 +132,50 @@
/*
* RealView PB1176 AMBA devices
*/
-#define GPIO2_IRQ { IRQ_PB1176_GPIO2, NO_IRQ }
-#define GPIO3_IRQ { IRQ_PB1176_GPIO3, NO_IRQ }
-#define AACI_IRQ { IRQ_PB1176_AACI, NO_IRQ }
+#define GPIO2_IRQ { IRQ_PB1176_GPIO2 }
+#define GPIO3_IRQ { IRQ_PB1176_GPIO3 }
+#define AACI_IRQ { IRQ_PB1176_AACI }
#define MMCI0_IRQ { IRQ_PB1176_MMCI0A, IRQ_PB1176_MMCI0B }
-#define KMI0_IRQ { IRQ_PB1176_KMI0, NO_IRQ }
-#define KMI1_IRQ { IRQ_PB1176_KMI1, NO_IRQ }
-#define PB1176_SMC_IRQ { NO_IRQ, NO_IRQ }
-#define MPMC_IRQ { NO_IRQ, NO_IRQ }
-#define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD, NO_IRQ }
-#define SCTL_IRQ { NO_IRQ, NO_IRQ }
-#define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG, NO_IRQ }
-#define PB1176_GPIO0_IRQ { IRQ_PB1176_GPIO0, NO_IRQ }
-#define GPIO1_IRQ { IRQ_PB1176_GPIO1, NO_IRQ }
-#define PB1176_RTC_IRQ { IRQ_DC1176_RTC, NO_IRQ }
-#define SCI_IRQ { IRQ_PB1176_SCI, NO_IRQ }
-#define PB1176_UART0_IRQ { IRQ_DC1176_UART0, NO_IRQ }
-#define PB1176_UART1_IRQ { IRQ_DC1176_UART1, NO_IRQ }
-#define PB1176_UART2_IRQ { IRQ_DC1176_UART2, NO_IRQ }
-#define PB1176_UART3_IRQ { IRQ_DC1176_UART3, NO_IRQ }
-#define PB1176_UART4_IRQ { IRQ_PB1176_UART4, NO_IRQ }
-#define PB1176_SSP_IRQ { IRQ_DC1176_SSP, NO_IRQ }
+#define KMI0_IRQ { IRQ_PB1176_KMI0 }
+#define KMI1_IRQ { IRQ_PB1176_KMI1 }
+#define PB1176_SMC_IRQ { }
+#define MPMC_IRQ { }
+#define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD }
+#define SCTL_IRQ { }
+#define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG }
+#define PB1176_GPIO0_IRQ { IRQ_DC1176_GPIO0 }
+#define GPIO1_IRQ { IRQ_PB1176_GPIO1 }
+#define PB1176_RTC_IRQ { IRQ_DC1176_RTC }
+#define SCI_IRQ { IRQ_PB1176_SCI }
+#define PB1176_UART0_IRQ { IRQ_DC1176_UART0 }
+#define PB1176_UART1_IRQ { IRQ_DC1176_UART1 }
+#define PB1176_UART2_IRQ { IRQ_DC1176_UART2 }
+#define PB1176_UART3_IRQ { IRQ_DC1176_UART3 }
+#define PB1176_UART4_IRQ { IRQ_PB1176_UART4 }
+#define PB1176_SSP_IRQ { IRQ_DC1176_SSP }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
-AMBA_DEVICE(uart4, "fpga:uart4", PB1176_UART4, NULL);
+APB_DEVICE(aaci, "fpga:aaci", AACI, NULL);
+APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
+APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
+APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
+APB_DEVICE(uart4, "fpga:uart4", PB1176_UART4, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:smc", PB1176_SMC, NULL);
-AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:wdog", PB1176_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:gpio0", PB1176_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(rtc, "dev:rtc", PB1176_RTC, NULL);
-AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:uart0", PB1176_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:uart1", PB1176_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:uart2", PB1176_UART2, NULL);
-AMBA_DEVICE(uart3, "dev:uart3", PB1176_UART3, NULL);
-AMBA_DEVICE(ssp0, "dev:ssp0", PB1176_SSP, &ssp0_plat_data);
-AMBA_DEVICE(clcd, "dev:clcd", PB1176_CLCD, &clcd_plat_data);
+AHB_DEVICE(smc, "dev:smc", PB1176_SMC, NULL);
+AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL);
+APB_DEVICE(wdog, "dev:wdog", PB1176_WATCHDOG, NULL);
+APB_DEVICE(gpio0, "dev:gpio0", PB1176_GPIO0, &gpio0_plat_data);
+APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
+APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
+APB_DEVICE(rtc, "dev:rtc", PB1176_RTC, NULL);
+APB_DEVICE(sci0, "dev:sci0", SCI, NULL);
+APB_DEVICE(uart0, "dev:uart0", PB1176_UART0, NULL);
+APB_DEVICE(uart1, "dev:uart1", PB1176_UART1, NULL);
+APB_DEVICE(uart2, "dev:uart2", PB1176_UART2, NULL);
+APB_DEVICE(uart3, "dev:uart3", PB1176_UART3, NULL);
+APB_DEVICE(ssp0, "dev:ssp0", PB1176_SSP, &ssp0_plat_data);
+AHB_DEVICE(clcd, "dev:clcd", PB1176_CLCD, &clcd_plat_data);
static struct amba_device *amba_devs[] __initdata = {
&uart0_device,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 2147335..ae7fe54 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -127,52 +127,52 @@
* RealView PB11MPCore AMBA devices
*/
-#define GPIO2_IRQ { IRQ_PB11MP_GPIO2, NO_IRQ }
-#define GPIO3_IRQ { IRQ_PB11MP_GPIO3, NO_IRQ }
-#define AACI_IRQ { IRQ_TC11MP_AACI, NO_IRQ }
+#define GPIO2_IRQ { IRQ_PB11MP_GPIO2 }
+#define GPIO3_IRQ { IRQ_PB11MP_GPIO3 }
+#define AACI_IRQ { IRQ_TC11MP_AACI }
#define MMCI0_IRQ { IRQ_TC11MP_MMCI0A, IRQ_TC11MP_MMCI0B }
-#define KMI0_IRQ { IRQ_TC11MP_KMI0, NO_IRQ }
-#define KMI1_IRQ { IRQ_TC11MP_KMI1, NO_IRQ }
-#define PB11MP_SMC_IRQ { NO_IRQ, NO_IRQ }
-#define MPMC_IRQ { NO_IRQ, NO_IRQ }
-#define PB11MP_CLCD_IRQ { IRQ_PB11MP_CLCD, NO_IRQ }
-#define DMAC_IRQ { IRQ_PB11MP_DMAC, NO_IRQ }
-#define SCTL_IRQ { NO_IRQ, NO_IRQ }
-#define PB11MP_WATCHDOG_IRQ { IRQ_PB11MP_WATCHDOG, NO_IRQ }
-#define PB11MP_GPIO0_IRQ { IRQ_PB11MP_GPIO0, NO_IRQ }
-#define GPIO1_IRQ { IRQ_PB11MP_GPIO1, NO_IRQ }
-#define PB11MP_RTC_IRQ { IRQ_TC11MP_RTC, NO_IRQ }
-#define SCI_IRQ { IRQ_PB11MP_SCI, NO_IRQ }
-#define PB11MP_UART0_IRQ { IRQ_TC11MP_UART0, NO_IRQ }
-#define PB11MP_UART1_IRQ { IRQ_TC11MP_UART1, NO_IRQ }
-#define PB11MP_UART2_IRQ { IRQ_PB11MP_UART2, NO_IRQ }
-#define PB11MP_UART3_IRQ { IRQ_PB11MP_UART3, NO_IRQ }
-#define PB11MP_SSP_IRQ { IRQ_PB11MP_SSP, NO_IRQ }
+#define KMI0_IRQ { IRQ_TC11MP_KMI0 }
+#define KMI1_IRQ { IRQ_TC11MP_KMI1 }
+#define PB11MP_SMC_IRQ { }
+#define MPMC_IRQ { }
+#define PB11MP_CLCD_IRQ { IRQ_PB11MP_CLCD }
+#define DMAC_IRQ { IRQ_PB11MP_DMAC }
+#define SCTL_IRQ { }
+#define PB11MP_WATCHDOG_IRQ { IRQ_PB11MP_WATCHDOG }
+#define PB11MP_GPIO0_IRQ { IRQ_PB11MP_GPIO0 }
+#define GPIO1_IRQ { IRQ_PB11MP_GPIO1 }
+#define PB11MP_RTC_IRQ { IRQ_TC11MP_RTC }
+#define SCI_IRQ { IRQ_PB11MP_SCI }
+#define PB11MP_UART0_IRQ { IRQ_TC11MP_UART0 }
+#define PB11MP_UART1_IRQ { IRQ_TC11MP_UART1 }
+#define PB11MP_UART2_IRQ { IRQ_PB11MP_UART2 }
+#define PB11MP_UART3_IRQ { IRQ_PB11MP_UART3 }
+#define PB11MP_SSP_IRQ { IRQ_PB11MP_SSP }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
-AMBA_DEVICE(uart3, "fpga:uart3", PB11MP_UART3, NULL);
+APB_DEVICE(aaci, "fpga:aaci", AACI, NULL);
+APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
+APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
+APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
+APB_DEVICE(uart3, "fpga:uart3", PB11MP_UART3, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:smc", PB11MP_SMC, NULL);
-AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:wdog", PB11MP_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:gpio0", PB11MP_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(rtc, "dev:rtc", PB11MP_RTC, NULL);
-AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:uart0", PB11MP_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:uart1", PB11MP_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:uart2", PB11MP_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, &ssp0_plat_data);
+AHB_DEVICE(smc, "dev:smc", PB11MP_SMC, NULL);
+AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL);
+APB_DEVICE(wdog, "dev:wdog", PB11MP_WATCHDOG, NULL);
+APB_DEVICE(gpio0, "dev:gpio0", PB11MP_GPIO0, &gpio0_plat_data);
+APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
+APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
+APB_DEVICE(rtc, "dev:rtc", PB11MP_RTC, NULL);
+APB_DEVICE(sci0, "dev:sci0", SCI, NULL);
+APB_DEVICE(uart0, "dev:uart0", PB11MP_UART0, NULL);
+APB_DEVICE(uart1, "dev:uart1", PB11MP_UART1, NULL);
+APB_DEVICE(uart2, "dev:uart2", PB11MP_UART2, NULL);
+APB_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, &ssp0_plat_data);
/* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd, "issp:clcd", PB11MP_CLCD, &clcd_plat_data);
-AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL);
+AHB_DEVICE(clcd, "issp:clcd", PB11MP_CLCD, &clcd_plat_data);
+AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 25b2e59..5965017 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -122,52 +122,52 @@
* RealView PBA8Core AMBA devices
*/
-#define GPIO2_IRQ { IRQ_PBA8_GPIO2, NO_IRQ }
-#define GPIO3_IRQ { IRQ_PBA8_GPIO3, NO_IRQ }
-#define AACI_IRQ { IRQ_PBA8_AACI, NO_IRQ }
+#define GPIO2_IRQ { IRQ_PBA8_GPIO2 }
+#define GPIO3_IRQ { IRQ_PBA8_GPIO3 }
+#define AACI_IRQ { IRQ_PBA8_AACI }
#define MMCI0_IRQ { IRQ_PBA8_MMCI0A, IRQ_PBA8_MMCI0B }
-#define KMI0_IRQ { IRQ_PBA8_KMI0, NO_IRQ }
-#define KMI1_IRQ { IRQ_PBA8_KMI1, NO_IRQ }
-#define PBA8_SMC_IRQ { NO_IRQ, NO_IRQ }
-#define MPMC_IRQ { NO_IRQ, NO_IRQ }
-#define PBA8_CLCD_IRQ { IRQ_PBA8_CLCD, NO_IRQ }
-#define DMAC_IRQ { IRQ_PBA8_DMAC, NO_IRQ }
-#define SCTL_IRQ { NO_IRQ, NO_IRQ }
-#define PBA8_WATCHDOG_IRQ { IRQ_PBA8_WATCHDOG, NO_IRQ }
-#define PBA8_GPIO0_IRQ { IRQ_PBA8_GPIO0, NO_IRQ }
-#define GPIO1_IRQ { IRQ_PBA8_GPIO1, NO_IRQ }
-#define PBA8_RTC_IRQ { IRQ_PBA8_RTC, NO_IRQ }
-#define SCI_IRQ { IRQ_PBA8_SCI, NO_IRQ }
-#define PBA8_UART0_IRQ { IRQ_PBA8_UART0, NO_IRQ }
-#define PBA8_UART1_IRQ { IRQ_PBA8_UART1, NO_IRQ }
-#define PBA8_UART2_IRQ { IRQ_PBA8_UART2, NO_IRQ }
-#define PBA8_UART3_IRQ { IRQ_PBA8_UART3, NO_IRQ }
-#define PBA8_SSP_IRQ { IRQ_PBA8_SSP, NO_IRQ }
+#define KMI0_IRQ { IRQ_PBA8_KMI0 }
+#define KMI1_IRQ { IRQ_PBA8_KMI1 }
+#define PBA8_SMC_IRQ { }
+#define MPMC_IRQ { }
+#define PBA8_CLCD_IRQ { IRQ_PBA8_CLCD }
+#define DMAC_IRQ { IRQ_PBA8_DMAC }
+#define SCTL_IRQ { }
+#define PBA8_WATCHDOG_IRQ { IRQ_PBA8_WATCHDOG }
+#define PBA8_GPIO0_IRQ { IRQ_PBA8_GPIO0 }
+#define GPIO1_IRQ { IRQ_PBA8_GPIO1 }
+#define PBA8_RTC_IRQ { IRQ_PBA8_RTC }
+#define SCI_IRQ { IRQ_PBA8_SCI }
+#define PBA8_UART0_IRQ { IRQ_PBA8_UART0 }
+#define PBA8_UART1_IRQ { IRQ_PBA8_UART1 }
+#define PBA8_UART2_IRQ { IRQ_PBA8_UART2 }
+#define PBA8_UART3_IRQ { IRQ_PBA8_UART3 }
+#define PBA8_SSP_IRQ { IRQ_PBA8_SSP }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
-AMBA_DEVICE(uart3, "fpga:uart3", PBA8_UART3, NULL);
+APB_DEVICE(aaci, "fpga:aaci", AACI, NULL);
+APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
+APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
+APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
+APB_DEVICE(uart3, "fpga:uart3", PBA8_UART3, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:smc", PBA8_SMC, NULL);
-AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:wdog", PBA8_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:gpio0", PBA8_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(rtc, "dev:rtc", PBA8_RTC, NULL);
-AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:uart0", PBA8_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:uart1", PBA8_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:uart2", PBA8_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, &ssp0_plat_data);
+AHB_DEVICE(smc, "dev:smc", PBA8_SMC, NULL);
+AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL);
+APB_DEVICE(wdog, "dev:wdog", PBA8_WATCHDOG, NULL);
+APB_DEVICE(gpio0, "dev:gpio0", PBA8_GPIO0, &gpio0_plat_data);
+APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
+APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
+APB_DEVICE(rtc, "dev:rtc", PBA8_RTC, NULL);
+APB_DEVICE(sci0, "dev:sci0", SCI, NULL);
+APB_DEVICE(uart0, "dev:uart0", PBA8_UART0, NULL);
+APB_DEVICE(uart1, "dev:uart1", PBA8_UART1, NULL);
+APB_DEVICE(uart2, "dev:uart2", PBA8_UART2, NULL);
+APB_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, &ssp0_plat_data);
/* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd, "issp:clcd", PBA8_CLCD, &clcd_plat_data);
-AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL);
+AHB_DEVICE(clcd, "issp:clcd", PBA8_CLCD, &clcd_plat_data);
+AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index ac71564..1cd9956 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -144,52 +144,52 @@
* RealView PBXCore AMBA devices
*/
-#define GPIO2_IRQ { IRQ_PBX_GPIO2, NO_IRQ }
-#define GPIO3_IRQ { IRQ_PBX_GPIO3, NO_IRQ }
-#define AACI_IRQ { IRQ_PBX_AACI, NO_IRQ }
+#define GPIO2_IRQ { IRQ_PBX_GPIO2 }
+#define GPIO3_IRQ { IRQ_PBX_GPIO3 }
+#define AACI_IRQ { IRQ_PBX_AACI }
#define MMCI0_IRQ { IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B }
-#define KMI0_IRQ { IRQ_PBX_KMI0, NO_IRQ }
-#define KMI1_IRQ { IRQ_PBX_KMI1, NO_IRQ }
-#define PBX_SMC_IRQ { NO_IRQ, NO_IRQ }
-#define MPMC_IRQ { NO_IRQ, NO_IRQ }
-#define PBX_CLCD_IRQ { IRQ_PBX_CLCD, NO_IRQ }
-#define DMAC_IRQ { IRQ_PBX_DMAC, NO_IRQ }
-#define SCTL_IRQ { NO_IRQ, NO_IRQ }
-#define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG, NO_IRQ }
-#define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0, NO_IRQ }
-#define GPIO1_IRQ { IRQ_PBX_GPIO1, NO_IRQ }
-#define PBX_RTC_IRQ { IRQ_PBX_RTC, NO_IRQ }
-#define SCI_IRQ { IRQ_PBX_SCI, NO_IRQ }
-#define PBX_UART0_IRQ { IRQ_PBX_UART0, NO_IRQ }
-#define PBX_UART1_IRQ { IRQ_PBX_UART1, NO_IRQ }
-#define PBX_UART2_IRQ { IRQ_PBX_UART2, NO_IRQ }
-#define PBX_UART3_IRQ { IRQ_PBX_UART3, NO_IRQ }
-#define PBX_SSP_IRQ { IRQ_PBX_SSP, NO_IRQ }
+#define KMI0_IRQ { IRQ_PBX_KMI0 }
+#define KMI1_IRQ { IRQ_PBX_KMI1 }
+#define PBX_SMC_IRQ { }
+#define MPMC_IRQ { }
+#define PBX_CLCD_IRQ { IRQ_PBX_CLCD }
+#define DMAC_IRQ { IRQ_PBX_DMAC }
+#define SCTL_IRQ { }
+#define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG }
+#define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0 }
+#define GPIO1_IRQ { IRQ_PBX_GPIO1 }
+#define PBX_RTC_IRQ { IRQ_PBX_RTC }
+#define SCI_IRQ { IRQ_PBX_SCI }
+#define PBX_UART0_IRQ { IRQ_PBX_UART0 }
+#define PBX_UART1_IRQ { IRQ_PBX_UART1 }
+#define PBX_UART2_IRQ { IRQ_PBX_UART2 }
+#define PBX_UART3_IRQ { IRQ_PBX_UART3 }
+#define PBX_SSP_IRQ { IRQ_PBX_SSP }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
-AMBA_DEVICE(uart3, "fpga:uart3", PBX_UART3, NULL);
+APB_DEVICE(aaci, "fpga:aaci", AACI, NULL);
+APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
+APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
+APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
+APB_DEVICE(uart3, "fpga:uart3", PBX_UART3, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:smc", PBX_SMC, NULL);
-AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:wdog", PBX_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:gpio0", PBX_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(rtc, "dev:rtc", PBX_RTC, NULL);
-AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:uart0", PBX_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:uart1", PBX_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:uart2", PBX_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:ssp0", PBX_SSP, &ssp0_plat_data);
+AHB_DEVICE(smc, "dev:smc", PBX_SMC, NULL);
+AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL);
+APB_DEVICE(wdog, "dev:wdog", PBX_WATCHDOG, NULL);
+APB_DEVICE(gpio0, "dev:gpio0", PBX_GPIO0, &gpio0_plat_data);
+APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
+APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
+APB_DEVICE(rtc, "dev:rtc", PBX_RTC, NULL);
+APB_DEVICE(sci0, "dev:sci0", SCI, NULL);
+APB_DEVICE(uart0, "dev:uart0", PBX_UART0, NULL);
+APB_DEVICE(uart1, "dev:uart1", PBX_UART1, NULL);
+APB_DEVICE(uart2, "dev:uart2", PBX_UART2, NULL);
+APB_DEVICE(ssp0, "dev:ssp0", PBX_SSP, &ssp0_plat_data);
/* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd, "issp:clcd", PBX_CLCD, &clcd_plat_data);
-AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL);
+AHB_DEVICE(clcd, "issp:clcd", PBX_CLCD, &clcd_plat_data);
+AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
diff --git a/arch/arm/mach-rpc/include/mach/system.h b/arch/arm/mach-rpc/include/mach/system.h
deleted file mode 100644
index 359bab9..0000000
--- a/arch/arm/mach-rpc/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-rpc/include/mach/system.h
- *
- * Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-s3c2410/include/mach/system.h b/arch/arm/mach-s3c2410/include/mach/system.h
deleted file mode 100644
index 5e215c1..0000000
--- a/arch/arm/mach-s3c2410/include/mach/system.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/system.h
- *
- * Copyright (c) 2003 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - System function defines and includes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/io.h>
-#include <mach/hardware.h>
-
-#include <mach/map.h>
-#include <mach/idle.h>
-
-#include <mach/regs-clock.h>
-
-void (*s3c24xx_idle)(void);
-
-void s3c24xx_default_idle(void)
-{
- unsigned long tmp;
- int i;
-
- /* idle the system by using the idle mode which will wait for an
- * interrupt to happen before restarting the system.
- */
-
- /* Warning: going into idle state upsets jtag scanning */
-
- __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
- S3C2410_CLKCON);
-
- /* the samsung port seems to do a loop and then unset idle.. */
- for (i = 0; i < 50; i++) {
- tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
- }
-
- /* this bit is not cleared on re-start... */
-
- __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
- S3C2410_CLKCON);
-}
-
-static void arch_idle(void)
-{
- if (s3c24xx_idle != NULL)
- (s3c24xx_idle)();
- else
- s3c24xx_default_idle();
-}
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index aff6e85..c6eac98 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -32,8 +32,6 @@
#include <asm/proc-fns.h>
#include <asm/irq.h>
-#include <mach/idle.h>
-
#include <plat/cpu-freq.h>
#include <mach/regs-clock.h>
@@ -164,7 +162,7 @@
/* set our idle function */
- s3c24xx_idle = s3c2412_idle;
+ arm_pm_idle = s3c2412_idle;
/* register our io-tables */
diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c
index 5287d28..0e9a71c 100644
--- a/arch/arm/mach-s3c2416/s3c2416.c
+++ b/arch/arm/mach-s3c2416/s3c2416.c
@@ -44,7 +44,6 @@
#include <asm/proc-fns.h>
#include <asm/irq.h>
-#include <mach/idle.h>
#include <mach/regs-s3c2443-clock.h>
#include <plat/gpio-core.h>
@@ -60,6 +59,7 @@
#include <plat/fb-core.h>
#include <plat/nand-core.h>
#include <plat/adc-core.h>
+#include <plat/rtc-core.h>
static struct map_desc s3c2416_iodesc[] __initdata = {
IODESC_ENT(WATCHDOG),
@@ -88,8 +88,6 @@
{
printk(KERN_INFO "S3C2416: Initializing architecture\n");
- /* s3c24xx_idle = s3c2416_idle; */
-
/* change WDT IRQ number */
s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT;
@@ -101,6 +99,7 @@
s3c_fb_setname("s3c2443-fb");
s3c_adc_setname("s3c2416-adc");
+ s3c_rtc_setname("s3c2416-rtc");
#ifdef CONFIG_PM
register_syscore_ops(&s3c2416_pm_syscore_ops);
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index b9deaeb..b7778a9 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -41,6 +41,7 @@
#include <plat/fb-core.h>
#include <plat/nand-core.h>
#include <plat/adc-core.h>
+#include <plat/rtc-core.h>
static struct map_desc s3c2443_iodesc[] __initdata = {
IODESC_ENT(WATCHDOG),
@@ -73,6 +74,7 @@
s3c_fb_setname("s3c2443-fb");
s3c_adc_setname("s3c2443-adc");
+ s3c_rtc_setname("s3c2443-rtc");
/* change WDT IRQ number */
s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
diff --git a/arch/arm/mach-s3c64xx/include/mach/system.h b/arch/arm/mach-s3c64xx/include/mach/system.h
deleted file mode 100644
index 353ed43..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/system.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C6400 - system implementation
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
- /* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c
index 52b89a3..9143f8b 100644
--- a/arch/arm/mach-s5p64x0/common.c
+++ b/arch/arm/mach-s5p64x0/common.c
@@ -146,15 +146,12 @@
{
unsigned long val;
- if (!need_resched()) {
- val = __raw_readl(S5P64X0_PWR_CFG);
- val &= ~(0x3 << 5);
- val |= (0x1 << 5);
- __raw_writel(val, S5P64X0_PWR_CFG);
+ val = __raw_readl(S5P64X0_PWR_CFG);
+ val &= ~(0x3 << 5);
+ val |= (0x1 << 5);
+ __raw_writel(val, S5P64X0_PWR_CFG);
- cpu_do_idle();
- }
- local_irq_enable();
+ cpu_do_idle();
}
/*
@@ -286,7 +283,7 @@
printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n");
/* set idle function */
- pm_idle = s5p64x0_idle;
+ arm_pm_idle = s5p64x0_idle;
return device_register(&s5p64x0_dev);
}
diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c
index f820c07..f7f68ad 100644
--- a/arch/arm/mach-s5p64x0/dma.c
+++ b/arch/arm/mach-s5p64x0/dma.c
@@ -108,34 +108,22 @@
.peri_id = s5p6450_pdma_peri,
};
-struct amba_device s5p64x0_device_pdma = {
- .dev = {
- .init_name = "dma-pl330",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .res = {
- .start = S5P64X0_PA_PDMA,
- .end = S5P64X0_PA_PDMA + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_DMA0, NO_IRQ},
- .periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(s5p64x0_pdma, "dma-pl330", 0x00041330, S5P64X0_PA_PDMA,
+ {IRQ_DMA0}, NULL);
static int __init s5p64x0_dma_init(void)
{
if (soc_is_s5p6450()) {
dma_cap_set(DMA_SLAVE, s5p6450_pdma_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, s5p6450_pdma_pdata.cap_mask);
- s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata;
+ s5p64x0_pdma_device.dev.platform_data = &s5p6450_pdma_pdata;
} else {
dma_cap_set(DMA_SLAVE, s5p6440_pdma_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, s5p6440_pdma_pdata.cap_mask);
- s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
+ s5p64x0_pdma_device.dev.platform_data = &s5p6440_pdma_pdata;
}
- amba_device_register(&s5p64x0_device_pdma, &iomem_resource);
+ amba_device_register(&s5p64x0_pdma_device, &iomem_resource);
return 0;
}
diff --git a/arch/arm/mach-s5p64x0/include/mach/system.h b/arch/arm/mach-s5p64x0/include/mach/system.h
deleted file mode 100644
index cf26e09..0000000
--- a/arch/arm/mach-s5p64x0/include/mach/system.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/system.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 - system support header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
- /* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c
index c909573..ff71e2d 100644
--- a/arch/arm/mach-s5pc100/common.c
+++ b/arch/arm/mach-s5pc100/common.c
@@ -129,14 +129,6 @@
}
};
-static void s5pc100_idle(void)
-{
- if (!need_resched())
- cpu_do_idle();
-
- local_irq_enable();
-}
-
/*
* s5pc100_map_io
*
@@ -210,10 +202,6 @@
int __init s5pc100_init(void)
{
printk(KERN_INFO "S5PC100: Initializing architecture\n");
-
- /* set idle function */
- pm_idle = s5pc100_idle;
-
return device_register(&s5pc100_dev);
}
diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c
index c841f4d3..96b1ab3 100644
--- a/arch/arm/mach-s5pc100/dma.c
+++ b/arch/arm/mach-s5pc100/dma.c
@@ -73,21 +73,8 @@
.peri_id = pdma0_peri,
};
-struct amba_device s5pc100_device_pdma0 = {
- .dev = {
- .init_name = "dma-pl330.0",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5pc100_pdma0_pdata,
- },
- .res = {
- .start = S5PC100_PA_PDMA0,
- .end = S5PC100_PA_PDMA0 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA0, NO_IRQ},
- .periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(s5pc100_pdma0, "dma-pl330.0", 0x00041330, S5PC100_PA_PDMA0,
+ {IRQ_PDMA0}, &s5pc100_pdma0_pdata);
u8 pdma1_peri[] = {
DMACH_UART0_RX,
@@ -127,31 +114,18 @@
.peri_id = pdma1_peri,
};
-struct amba_device s5pc100_device_pdma1 = {
- .dev = {
- .init_name = "dma-pl330.1",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5pc100_pdma1_pdata,
- },
- .res = {
- .start = S5PC100_PA_PDMA1,
- .end = S5PC100_PA_PDMA1 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA1, NO_IRQ},
- .periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(s5pc100_pdma1, "dma-pl330.1", 0x00041330, S5PC100_PA_PDMA1,
+ {IRQ_PDMA1}, &s5pc100_pdma1_pdata);
static int __init s5pc100_dma_init(void)
{
dma_cap_set(DMA_SLAVE, s5pc100_pdma0_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, s5pc100_pdma0_pdata.cap_mask);
- amba_device_register(&s5pc100_device_pdma0, &iomem_resource);
+ amba_device_register(&s5pc100_pdma0_device, &iomem_resource);
dma_cap_set(DMA_SLAVE, s5pc100_pdma1_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, s5pc100_pdma1_pdata.cap_mask);
- amba_device_register(&s5pc100_device_pdma1, &iomem_resource);
+ amba_device_register(&s5pc100_pdma1_device, &iomem_resource);
return 0;
}
diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h
deleted file mode 100644
index afc96c2..0000000
--- a/arch/arm/mach-s5pc100/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/system.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - system implementation
- *
- * Based on mach-s3c6400/include/mach/system.h
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
- /* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c
index 9c1bcdc..4c9e902 100644
--- a/arch/arm/mach-s5pv210/common.c
+++ b/arch/arm/mach-s5pv210/common.c
@@ -142,14 +142,6 @@
}
};
-static void s5pv210_idle(void)
-{
- if (!need_resched())
- cpu_do_idle();
-
- local_irq_enable();
-}
-
void s5pv210_restart(char mode, const char *cmd)
{
__raw_writel(0x1, S5P_SWRESET);
@@ -247,10 +239,6 @@
int __init s5pv210_init(void)
{
printk(KERN_INFO "S5PV210: Initializing architecture\n");
-
- /* set idle function */
- pm_idle = s5pv210_idle;
-
return device_register(&s5pv210_dev);
}
diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c
index a6113e0..f6885d2 100644
--- a/arch/arm/mach-s5pv210/dma.c
+++ b/arch/arm/mach-s5pv210/dma.c
@@ -71,21 +71,8 @@
.peri_id = pdma0_peri,
};
-struct amba_device s5pv210_device_pdma0 = {
- .dev = {
- .init_name = "dma-pl330.0",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5pv210_pdma0_pdata,
- },
- .res = {
- .start = S5PV210_PA_PDMA0,
- .end = S5PV210_PA_PDMA0 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA0, NO_IRQ},
- .periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(s5pv210_pdma0, "dma-pl330.0", 0x00041330, S5PV210_PA_PDMA0,
+ {IRQ_PDMA0}, &s5pv210_pdma0_pdata);
u8 pdma1_peri[] = {
DMACH_UART0_RX,
@@ -127,31 +114,18 @@
.peri_id = pdma1_peri,
};
-struct amba_device s5pv210_device_pdma1 = {
- .dev = {
- .init_name = "dma-pl330.1",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5pv210_pdma1_pdata,
- },
- .res = {
- .start = S5PV210_PA_PDMA1,
- .end = S5PV210_PA_PDMA1 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA1, NO_IRQ},
- .periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(s5pv210_pdma1, "dma-pl330.1", 0x00041330, S5PV210_PA_PDMA1,
+ {IRQ_PDMA1}, &s5pv210_pdma1_pdata);
static int __init s5pv210_dma_init(void)
{
dma_cap_set(DMA_SLAVE, s5pv210_pdma0_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, s5pv210_pdma0_pdata.cap_mask);
- amba_device_register(&s5pv210_device_pdma0, &iomem_resource);
+ amba_device_register(&s5pv210_pdma0_device, &iomem_resource);
dma_cap_set(DMA_SLAVE, s5pv210_pdma1_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, s5pv210_pdma1_pdata.cap_mask);
- amba_device_register(&s5pv210_device_pdma1, &iomem_resource);
+ amba_device_register(&s5pv210_pdma1_device, &iomem_resource);
return 0;
}
diff --git a/arch/arm/mach-s5pv210/include/mach/system.h b/arch/arm/mach-s5pv210/include/mach/system.h
deleted file mode 100644
index bf288ce..0000000
--- a/arch/arm/mach-s5pv210/include/mach/system.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/system.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5PV210 - system support header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
- /* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-sa1100/include/mach/system.h b/arch/arm/mach-sa1100/include/mach/system.h
deleted file mode 100644
index e17b208..0000000
--- a/arch/arm/mach-sa1100/include/mach/system.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/system.h
- *
- * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net>
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index a851c25..6a2a7f2 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -149,10 +149,16 @@
.init = shark_timer_init,
};
+static void shark_init_early(void)
+{
+ disable_hlt();
+}
+
MACHINE_START(SHARK, "Shark")
/* Maintainer: Alexander Schulz */
.atag_offset = 0x3000,
.map_io = shark_map_io,
+ .init_early = shark_init_early,
.init_irq = shark_init_irq,
.timer = &shark_timer,
.dma_zone_size = SZ_4M,
diff --git a/arch/arm/mach-shark/include/mach/system.h b/arch/arm/mach-shark/include/mach/system.h
deleted file mode 100644
index 1b2f2c5..0000000
--- a/arch/arm/mach-shark/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/system.h
- *
- * by Alexander Schulz
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-}
-
-#endif
diff --git a/arch/arm/mach-shmobile/include/mach/system.h b/arch/arm/mach-shmobile/include/mach/system.h
index 956ac18..3bbcb3f 100644
--- a/arch/arm/mach-shmobile/include/mach/system.h
+++ b/arch/arm/mach-shmobile/include/mach/system.h
@@ -1,11 +1,6 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
static inline void arch_reset(char mode, const char *cmd)
{
soft_restart(0);
diff --git a/arch/arm/mach-spear3xx/include/mach/system.h b/arch/arm/mach-spear3xx/include/mach/system.h
deleted file mode 100644
index 92cee63..0000000
--- a/arch/arm/mach-spear3xx/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/system.h
- *
- * SPEAr3xx Machine family specific architecture functions
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-
-#include <plat/system.h>
-
-#endif /* __MACH_SYSTEM_H */
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index a5e46b4..9da50e281 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -430,18 +430,8 @@
.irq_base = SPEAR300_GPIO1_INT_BASE,
};
-struct amba_device spear300_gpio1_device = {
- .dev = {
- .init_name = "gpio1",
- .platform_data = &gpio1_plat_data,
- },
- .res = {
- .start = SPEAR300_GPIO_BASE,
- .end = SPEAR300_GPIO_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {SPEAR300_VIRQ_GPIO1, NO_IRQ},
-};
+AMBA_APB_DEVICE(spear300_gpio1, "gpio1", 0, SPEAR300_GPIO_BASE,
+ {SPEAR300_VIRQ_GPIO1}, &gpio1_plat_data);
/* spear300 routines */
void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index 10af45d..b1733c3 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -28,31 +28,12 @@
.irq_base = SPEAR3XX_GPIO_INT_BASE,
};
-struct amba_device spear3xx_gpio_device = {
- .dev = {
- .init_name = "gpio",
- .platform_data = &gpio_plat_data,
- },
- .res = {
- .start = SPEAR3XX_ICM3_GPIO_BASE,
- .end = SPEAR3XX_ICM3_GPIO_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {SPEAR3XX_IRQ_BASIC_GPIO, NO_IRQ},
-};
+AMBA_APB_DEVICE(spear3xx_gpio, "gpio", 0, SPEAR3XX_ICM3_GPIO_BASE,
+ {SPEAR3XX_IRQ_BASIC_GPIO}, &gpio_plat_data);
/* uart device registration */
-struct amba_device spear3xx_uart_device = {
- .dev = {
- .init_name = "uart",
- },
- .res = {
- .start = SPEAR3XX_ICM1_UART_BASE,
- .end = SPEAR3XX_ICM1_UART_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {SPEAR3XX_IRQ_UART, NO_IRQ},
-};
+AMBA_APB_DEVICE(spear3xx_uart, "uart", 0, SPEAR3XX_ICM1_UART_BASE,
+ {SPEAR3XX_IRQ_UART}, NULL);
/* Do spear3xx familiy common initialization part here */
void __init spear3xx_init(void)
diff --git a/arch/arm/mach-spear6xx/include/mach/system.h b/arch/arm/mach-spear6xx/include/mach/system.h
deleted file mode 100644
index 0b1d2be..0000000
--- a/arch/arm/mach-spear6xx/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/system.h
- *
- * SPEAr6xx Machine family specific architecture functions
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-
-#include <plat/system.h>
-
-#endif /* __MACH_SYSTEM_H */
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index e0f6628..b997b1b 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -34,7 +34,7 @@
.end = SPEAR6XX_ICM1_UART0_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
- .irq = {IRQ_UART_0, NO_IRQ},
+ .irq = {IRQ_UART_0},
}, {
.dev = {
.init_name = "uart1",
@@ -44,7 +44,7 @@
.end = SPEAR6XX_ICM1_UART1_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
- .irq = {IRQ_UART_1, NO_IRQ},
+ .irq = {IRQ_UART_1},
}
};
@@ -73,7 +73,7 @@
.end = SPEAR6XX_CPU_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
- .irq = {IRQ_LOCAL_GPIO, NO_IRQ},
+ .irq = {IRQ_LOCAL_GPIO},
}, {
.dev = {
.init_name = "gpio1",
@@ -84,7 +84,7 @@
.end = SPEAR6XX_ICM3_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
- .irq = {IRQ_BASIC_GPIO, NO_IRQ},
+ .irq = {IRQ_BASIC_GPIO},
}, {
.dev = {
.init_name = "gpio2",
@@ -95,7 +95,7 @@
.end = SPEAR6XX_ICM2_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
- .irq = {IRQ_APPL_GPIO, NO_IRQ},
+ .irq = {IRQ_APPL_GPIO},
}
};
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index a2eb901..2db20da 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -27,7 +27,6 @@
#include <asm/hardware/gic.h>
#include <mach/iomap.h>
-#include <mach/system.h>
#include "board.h"
#include "clock.h"
@@ -96,6 +95,8 @@
#ifdef CONFIG_ARCH_TEGRA_2x_SOC
void __init tegra20_init_early(void)
{
+ disable_hlt(); /* idle WFI usage needs to be confirmed */
+
tegra_init_fuse();
tegra2_init_clocks();
tegra_clk_init_from_table(tegra20_clk_init_table);
diff --git a/arch/arm/mach-tegra/include/mach/system.h b/arch/arm/mach-tegra/include/mach/system.h
deleted file mode 100644
index a312988..0000000
--- a/arch/arm/mach-tegra/include/mach/system.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/system.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- * Colin Cross <ccross@google.com>
- * Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_SYSTEM_H
-#define __MACH_TEGRA_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-}
-
-#endif
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index b4c6926..b986560 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -94,19 +94,9 @@
#endif
};
-static struct amba_device uart0_device = {
- .dev = {
- .coherent_dma_mask = ~0,
- .init_name = "uart0", /* Slow device at 0x3000 offset */
- .platform_data = &uart0_plat_data,
- },
- .res = {
- .start = U300_UART0_BASE,
- .end = U300_UART0_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_U300_UART0, NO_IRQ },
-};
+/* Slow device at 0x3000 offset */
+static AMBA_APB_DEVICE(uart0, "uart0", 0, U300_UART0_BASE,
+ { IRQ_U300_UART0 }, &uart0_plat_data);
/* The U335 have an additional UART1 on the APP CPU */
#ifdef CONFIG_MACH_U300_BS335
@@ -118,71 +108,28 @@
#endif
};
-static struct amba_device uart1_device = {
- .dev = {
- .coherent_dma_mask = ~0,
- .init_name = "uart1", /* Fast device at 0x7000 offset */
- .platform_data = &uart1_plat_data,
- },
- .res = {
- .start = U300_UART1_BASE,
- .end = U300_UART1_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_U300_UART1, NO_IRQ },
-};
+/* Fast device at 0x7000 offset */
+static AMBA_APB_DEVICE(uart1, "uart1", 0, U300_UART1_BASE,
+ { IRQ_U300_UART1 }, &uart1_plat_data);
#endif
-static struct amba_device pl172_device = {
- .dev = {
- .init_name = "pl172", /* AHB device at 0x4000 offset */
- .platform_data = NULL,
- },
- .res = {
- .start = U300_EMIF_CFG_BASE,
- .end = U300_EMIF_CFG_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
+/* AHB device at 0x4000 offset */
+static AMBA_APB_DEVICE(pl172, "pl172", 0, U300_EMIF_CFG_BASE, { }, NULL);
/*
* Everything within this next ifdef deals with external devices connected to
* the APP SPI bus.
*/
-static struct amba_device pl022_device = {
- .dev = {
- .coherent_dma_mask = ~0,
- .init_name = "pl022", /* Fast device at 0x6000 offset */
- },
- .res = {
- .start = U300_SPI_BASE,
- .end = U300_SPI_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_U300_SPI, NO_IRQ },
- /*
- * This device has a DMA channel but the Linux driver does not use
- * it currently.
- */
-};
+/* Fast device at 0x6000 offset */
+static AMBA_APB_DEVICE(pl022, "pl022", 0, U300_SPI_BASE,
+ { IRQ_U300_SPI }, NULL);
-static struct amba_device mmcsd_device = {
- .dev = {
- .init_name = "mmci", /* Fast device at 0x1000 offset */
- .platform_data = NULL, /* Added later */
- },
- .res = {
- .start = U300_MMCSD_BASE,
- .end = U300_MMCSD_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 },
- /*
- * This device has a DMA channel but the Linux driver does not use
- * it currently.
- */
-};
+/* Fast device at 0x1000 offset */
+#define U300_MMCSD_IRQS { IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 }
+
+static AMBA_APB_DEVICE(mmcsd, "mmci", 0, U300_MMCSD_BASE,
+ U300_MMCSD_IRQS, NULL);
/*
* The order of device declaration may be important, since some devices
diff --git a/arch/arm/mach-u300/include/mach/system.h b/arch/arm/mach-u300/include/mach/system.h
deleted file mode 100644
index 574d46e..0000000
--- a/arch/arm/mach-u300/include/mach/system.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/system.h
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * System shutdown and reset functions.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
index c563e54..898a645 100644
--- a/arch/arm/mach-ux500/devices-common.c
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -26,29 +26,22 @@
struct amba_device *dev;
int ret;
- dev = kzalloc(sizeof *dev, GFP_KERNEL);
+ dev = amba_device_alloc(name, base, SZ_4K);
if (!dev)
return ERR_PTR(-ENOMEM);
- dev->dev.init_name = name;
-
- dev->res.start = base;
- dev->res.end = base + SZ_4K - 1;
- dev->res.flags = IORESOURCE_MEM;
-
dev->dma_mask = DMA_BIT_MASK(32);
dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
dev->irq[0] = irq;
- dev->irq[1] = NO_IRQ;
dev->periphid = periphid;
dev->dev.platform_data = pdata;
- ret = amba_device_register(dev, &iomem_resource);
+ ret = amba_device_add(dev, &iomem_resource);
if (ret) {
- kfree(dev);
+ amba_device_put(dev);
return ERR_PTR(ret);
}
diff --git a/arch/arm/mach-ux500/include/mach/system.h b/arch/arm/mach-ux500/include/mach/system.h
deleted file mode 100644
index 258e5c9..0000000
--- a/arch/arm/mach-ux500/include/mach/system.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Copyright (C) 2009 ST-Ericsson.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 02b7b93..4f352e4 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -582,58 +582,58 @@
.num_chipselect = 1,
};
-#define AACI_IRQ { IRQ_AACI, NO_IRQ }
+#define AACI_IRQ { IRQ_AACI }
#define MMCI0_IRQ { IRQ_MMCI0A,IRQ_SIC_MMCI0B }
-#define KMI0_IRQ { IRQ_SIC_KMI0, NO_IRQ }
-#define KMI1_IRQ { IRQ_SIC_KMI1, NO_IRQ }
+#define KMI0_IRQ { IRQ_SIC_KMI0 }
+#define KMI1_IRQ { IRQ_SIC_KMI1 }
/*
* These devices are connected directly to the multi-layer AHB switch
*/
-#define SMC_IRQ { NO_IRQ, NO_IRQ }
-#define MPMC_IRQ { NO_IRQ, NO_IRQ }
-#define CLCD_IRQ { IRQ_CLCDINT, NO_IRQ }
-#define DMAC_IRQ { IRQ_DMAINT, NO_IRQ }
+#define SMC_IRQ { }
+#define MPMC_IRQ { }
+#define CLCD_IRQ { IRQ_CLCDINT }
+#define DMAC_IRQ { IRQ_DMAINT }
/*
* These devices are connected via the core APB bridge
*/
-#define SCTL_IRQ { NO_IRQ, NO_IRQ }
-#define WATCHDOG_IRQ { IRQ_WDOGINT, NO_IRQ }
-#define GPIO0_IRQ { IRQ_GPIOINT0, NO_IRQ }
-#define GPIO1_IRQ { IRQ_GPIOINT1, NO_IRQ }
-#define RTC_IRQ { IRQ_RTCINT, NO_IRQ }
+#define SCTL_IRQ { }
+#define WATCHDOG_IRQ { IRQ_WDOGINT }
+#define GPIO0_IRQ { IRQ_GPIOINT0 }
+#define GPIO1_IRQ { IRQ_GPIOINT1 }
+#define RTC_IRQ { IRQ_RTCINT }
/*
* These devices are connected via the DMA APB bridge
*/
-#define SCI_IRQ { IRQ_SCIINT, NO_IRQ }
-#define UART0_IRQ { IRQ_UARTINT0, NO_IRQ }
-#define UART1_IRQ { IRQ_UARTINT1, NO_IRQ }
-#define UART2_IRQ { IRQ_UARTINT2, NO_IRQ }
-#define SSP_IRQ { IRQ_SSPINT, NO_IRQ }
+#define SCI_IRQ { IRQ_SCIINT }
+#define UART0_IRQ { IRQ_UARTINT0 }
+#define UART1_IRQ { IRQ_UARTINT1 }
+#define UART2_IRQ { IRQ_UARTINT2 }
+#define SSP_IRQ { IRQ_SSPINT }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:04", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL);
+APB_DEVICE(aaci, "fpga:04", AACI, NULL);
+APB_DEVICE(mmc0, "fpga:05", MMCI0, &mmc0_plat_data);
+APB_DEVICE(kmi0, "fpga:06", KMI0, NULL);
+APB_DEVICE(kmi1, "fpga:07", KMI1, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:00", SMC, NULL);
-AMBA_DEVICE(mpmc, "dev:10", MPMC, NULL);
-AMBA_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data);
-AMBA_DEVICE(dmac, "dev:30", DMAC, NULL);
-AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:e1", WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(rtc, "dev:e8", RTC, NULL);
-AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:f1", UART0, NULL);
-AMBA_DEVICE(uart1, "dev:f2", UART1, NULL);
-AMBA_DEVICE(uart2, "dev:f3", UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:f4", SSP, &ssp0_plat_data);
+AHB_DEVICE(smc, "dev:00", SMC, NULL);
+AHB_DEVICE(mpmc, "dev:10", MPMC, NULL);
+AHB_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data);
+AHB_DEVICE(dmac, "dev:30", DMAC, NULL);
+APB_DEVICE(sctl, "dev:e0", SCTL, NULL);
+APB_DEVICE(wdog, "dev:e1", WATCHDOG, NULL);
+APB_DEVICE(gpio0, "dev:e4", GPIO0, &gpio0_plat_data);
+APB_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
+APB_DEVICE(rtc, "dev:e8", RTC, NULL);
+APB_DEVICE(sci0, "dev:f0", SCI, NULL);
+APB_DEVICE(uart0, "dev:f1", UART0, NULL);
+APB_DEVICE(uart1, "dev:f2", UART1, NULL);
+APB_DEVICE(uart2, "dev:f3", UART2, NULL);
+APB_DEVICE(ssp0, "dev:f4", SSP, &ssp0_plat_data);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h
index 2ef2f55..683e607 100644
--- a/arch/arm/mach-versatile/core.h
+++ b/arch/arm/mach-versatile/core.h
@@ -36,20 +36,10 @@
extern struct of_dev_auxdata versatile_auxdata_lookup[];
#endif
-#define AMBA_DEVICE(name,busid,base,plat) \
-static struct amba_device name##_device = { \
- .dev = { \
- .coherent_dma_mask = ~0, \
- .init_name = busid, \
- .platform_data = plat, \
- }, \
- .res = { \
- .start = VERSATILE_##base##_BASE, \
- .end = (VERSATILE_##base##_BASE) + SZ_4K - 1,\
- .flags = IORESOURCE_MEM, \
- }, \
- .dma_mask = ~0, \
- .irq = base##_IRQ, \
-}
+#define APB_DEVICE(name, busid, base, plat) \
+static AMBA_APB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat)
+
+#define AHB_DEVICE(name, busid, base, plat) \
+static AMBA_AHB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat)
#endif
diff --git a/arch/arm/mach-versatile/include/mach/system.h b/arch/arm/mach-versatile/include/mach/system.h
deleted file mode 100644
index f3fa347..0000000
--- a/arch/arm/mach-versatile/include/mach/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-versatile/include/mach/system.h
- *
- * Copyright (C) 2003 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 9581c19..1973833 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -58,28 +58,28 @@
.irq_base = IRQ_GPIO3_START,
};
-#define UART3_IRQ { IRQ_SIC_UART3, NO_IRQ }
-#define SCI1_IRQ { IRQ_SIC_SCI3, NO_IRQ }
+#define UART3_IRQ { IRQ_SIC_UART3 }
+#define SCI1_IRQ { IRQ_SIC_SCI3 }
#define MMCI1_IRQ { IRQ_MMCI1A, IRQ_SIC_MMCI1B }
/*
* These devices are connected via the core APB bridge
*/
-#define GPIO2_IRQ { IRQ_GPIOINT2, NO_IRQ }
-#define GPIO3_IRQ { IRQ_GPIOINT3, NO_IRQ }
+#define GPIO2_IRQ { IRQ_GPIOINT2 }
+#define GPIO3_IRQ { IRQ_GPIOINT3 }
/*
* These devices are connected via the DMA APB bridge
*/
/* FPGA Primecells */
-AMBA_DEVICE(uart3, "fpga:09", UART3, NULL);
-AMBA_DEVICE(sci1, "fpga:0a", SCI1, NULL);
-AMBA_DEVICE(mmc1, "fpga:0b", MMCI1, &mmc1_plat_data);
+APB_DEVICE(uart3, "fpga:09", UART3, NULL);
+APB_DEVICE(sci1, "fpga:0a", SCI1, NULL);
+APB_DEVICE(mmc1, "fpga:0b", MMCI1, &mmc1_plat_data);
/* DevChip Primecells */
-AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(gpio3, "dev:e7", GPIO3, &gpio3_plat_data);
+APB_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
+APB_DEVICE(gpio3, "dev:e7", GPIO3, &gpio3_plat_data);
static struct amba_device *amba_devs[] __initdata = {
&uart3_device,
diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h
index f439715..9f0f282 100644
--- a/arch/arm/mach-vexpress/core.h
+++ b/arch/arm/mach-vexpress/core.h
@@ -1,19 +1,2 @@
#define __MMIO_P2V(x) (((x) & 0xfffff) | (((x) & 0x0f000000) >> 4) | 0xf8000000)
#define MMIO_P2V(x) ((void __iomem *)__MMIO_P2V(x))
-
-#define AMBA_DEVICE(name,busid,base,plat) \
-struct amba_device name##_device = { \
- .dev = { \
- .coherent_dma_mask = ~0UL, \
- .init_name = busid, \
- .platform_data = plat, \
- }, \
- .res = { \
- .start = base, \
- .end = base + SZ_4K - 1, \
- .flags = IORESOURCE_MEM, \
- }, \
- .dma_mask = ~0UL, \
- .irq = IRQ_##base, \
- /* .dma = DMA_##base,*/ \
-}
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index b1e87c1..1b1d2e4 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -109,10 +109,10 @@
.remove = versatile_clcd_remove_dma,
};
-static AMBA_DEVICE(clcd, "ct:clcd", CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data);
-static AMBA_DEVICE(dmc, "ct:dmc", CT_CA9X4_DMC, NULL);
-static AMBA_DEVICE(smc, "ct:smc", CT_CA9X4_SMC, NULL);
-static AMBA_DEVICE(gpio, "ct:gpio", CT_CA9X4_GPIO, NULL);
+static AMBA_AHB_DEVICE(clcd, "ct:clcd", 0, CT_CA9X4_CLCDC, IRQ_CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data);
+static AMBA_APB_DEVICE(dmc, "ct:dmc", 0, CT_CA9X4_DMC, IRQ_CT_CA9X4_DMC, NULL);
+static AMBA_APB_DEVICE(smc, "ct:smc", 0, CT_CA9X4_SMC, IRQ_CT_CA9X4_SMC, NULL);
+static AMBA_APB_DEVICE(gpio, "ct:gpio", 0, CT_CA9X4_GPIO, IRQ_CT_CA9X4_GPIO, NULL);
static struct amba_device *ct_ca9x4_amba_devs[] __initdata = {
&clcd_device,
diff --git a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
index a34d3d4..a40468f 100644
--- a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
+++ b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
@@ -35,7 +35,7 @@
* Interrupts. Those in {} are for AMBA devices
*/
#define IRQ_CT_CA9X4_CLCDC { 76 }
-#define IRQ_CT_CA9X4_DMC { -1 }
+#define IRQ_CT_CA9X4_DMC { 0 }
#define IRQ_CT_CA9X4_SMC { 77, 78 }
#define IRQ_CT_CA9X4_TIMER0 80
#define IRQ_CT_CA9X4_TIMER1 81
diff --git a/arch/arm/mach-vexpress/include/mach/system.h b/arch/arm/mach-vexpress/include/mach/system.h
deleted file mode 100644
index f653a8e..0000000
--- a/arch/arm/mach-vexpress/include/mach/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-vexpress/include/mach/system.h
- *
- * Copyright (C) 2003 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index b4a28ca..ad64f97 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -266,16 +266,16 @@
.status = v2m_mmci_status,
};
-static AMBA_DEVICE(aaci, "mb:aaci", V2M_AACI, NULL);
-static AMBA_DEVICE(mmci, "mb:mmci", V2M_MMCI, &v2m_mmci_data);
-static AMBA_DEVICE(kmi0, "mb:kmi0", V2M_KMI0, NULL);
-static AMBA_DEVICE(kmi1, "mb:kmi1", V2M_KMI1, NULL);
-static AMBA_DEVICE(uart0, "mb:uart0", V2M_UART0, NULL);
-static AMBA_DEVICE(uart1, "mb:uart1", V2M_UART1, NULL);
-static AMBA_DEVICE(uart2, "mb:uart2", V2M_UART2, NULL);
-static AMBA_DEVICE(uart3, "mb:uart3", V2M_UART3, NULL);
-static AMBA_DEVICE(wdt, "mb:wdt", V2M_WDT, NULL);
-static AMBA_DEVICE(rtc, "mb:rtc", V2M_RTC, NULL);
+static AMBA_APB_DEVICE(aaci, "mb:aaci", 0, V2M_AACI, IRQ_V2M_AACI, NULL);
+static AMBA_APB_DEVICE(mmci, "mb:mmci", 0, V2M_MMCI, IRQ_V2M_MMCI, &v2m_mmci_data);
+static AMBA_APB_DEVICE(kmi0, "mb:kmi0", 0, V2M_KMI0, IRQ_V2M_KMI0, NULL);
+static AMBA_APB_DEVICE(kmi1, "mb:kmi1", 0, V2M_KMI1, IRQ_V2M_KMI1, NULL);
+static AMBA_APB_DEVICE(uart0, "mb:uart0", 0, V2M_UART0, IRQ_V2M_UART0, NULL);
+static AMBA_APB_DEVICE(uart1, "mb:uart1", 0, V2M_UART1, IRQ_V2M_UART1, NULL);
+static AMBA_APB_DEVICE(uart2, "mb:uart2", 0, V2M_UART2, IRQ_V2M_UART2, NULL);
+static AMBA_APB_DEVICE(uart3, "mb:uart3", 0, V2M_UART3, IRQ_V2M_UART3, NULL);
+static AMBA_APB_DEVICE(wdt, "mb:wdt", 0, V2M_WDT, IRQ_V2M_WDT, NULL);
+static AMBA_APB_DEVICE(rtc, "mb:rtc", 0, V2M_RTC, IRQ_V2M_RTC, NULL);
static struct amba_device *v2m_amba_devs[] __initdata = {
&aaci_device,
diff --git a/arch/arm/mach-vt8500/include/mach/system.h b/arch/arm/mach-vt8500/include/mach/system.h
index d6c757e..58fa801 100644
--- a/arch/arm/mach-vt8500/include/mach/system.h
+++ b/arch/arm/mach-vt8500/include/mach/system.h
@@ -7,11 +7,6 @@
/* PM Software Reset request register */
#define VT8500_PMSR_VIRT 0xf8130060
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
static inline void arch_reset(char mode, const char *cmd)
{
writel(1, VT8500_PMSR_VIRT);
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
index 78110be..db82568 100644
--- a/arch/arm/mach-w90x900/dev.c
+++ b/arch/arm/mach-w90x900/dev.c
@@ -530,6 +530,7 @@
void __init nuc900_board_init(struct platform_device **device, int size)
{
+ disable_hlt();
platform_add_devices(device, size);
platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev));
spi_register_board_info(nuc900_spi_board_info,
diff --git a/arch/arm/mach-w90x900/include/mach/system.h b/arch/arm/mach-w90x900/include/mach/system.h
deleted file mode 100644
index 2aaeb93..0000000
--- a/arch/arm/mach-w90x900/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/system.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/system.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-static void arch_idle(void)
-{
-}
diff --git a/arch/arm/mach-zynq/include/mach/system.h b/arch/arm/mach-zynq/include/mach/system.h
deleted file mode 100644
index 8e88e0b..0000000
--- a/arch/arm/mach-zynq/include/mach/system.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* arch/arm/mach-zynq/include/mach/system.h
- *
- * Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_SYSTEM_H__
-#define __MACH_SYSTEM_H__
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c
index 8cced35..0e51fc36b 100644
--- a/arch/arm/plat-mxc/audmux-v2.c
+++ b/arch/arm/plat-mxc/audmux-v2.c
@@ -73,13 +73,13 @@
return -ENOMEM;
if (audmux_clk)
- clk_enable(audmux_clk);
+ clk_prepare_enable(audmux_clk);
ptcr = readl(audmux_base + MXC_AUDMUX_V2_PTCR(port));
pdcr = readl(audmux_base + MXC_AUDMUX_V2_PDCR(port));
if (audmux_clk)
- clk_disable(audmux_clk);
+ clk_disable_unprepare(audmux_clk);
ret = snprintf(buf, PAGE_SIZE, "PDCR: %08x\nPTCR: %08x\n",
pdcr, ptcr);
@@ -172,13 +172,13 @@
return -ENOSYS;
if (audmux_clk)
- clk_enable(audmux_clk);
+ clk_prepare_enable(audmux_clk);
writel(ptcr, audmux_base + MXC_AUDMUX_V2_PTCR(port));
writel(pdcr, audmux_base + MXC_AUDMUX_V2_PDCR(port));
if (audmux_clk)
- clk_disable(audmux_clk);
+ clk_disable_unprepare(audmux_clk);
return 0;
}
diff --git a/arch/arm/plat-mxc/devices/platform-ahci-imx.c b/arch/arm/plat-mxc/devices/platform-ahci-imx.c
index d8a56ae..ade4a1c 100644
--- a/arch/arm/plat-mxc/devices/platform-ahci-imx.c
+++ b/arch/arm/plat-mxc/devices/platform-ahci-imx.c
@@ -60,9 +60,9 @@
dev_err(dev, "no sata clock.\n");
return PTR_ERR(sata_clk);
}
- ret = clk_enable(sata_clk);
+ ret = clk_prepare_enable(sata_clk);
if (ret) {
- dev_err(dev, "can't enable sata clock.\n");
+ dev_err(dev, "can't prepare/enable sata clock.\n");
goto put_sata_clk;
}
@@ -73,9 +73,9 @@
ret = PTR_ERR(sata_ref_clk);
goto release_sata_clk;
}
- ret = clk_enable(sata_ref_clk);
+ ret = clk_prepare_enable(sata_ref_clk);
if (ret) {
- dev_err(dev, "can't enable sata ref clock.\n");
+ dev_err(dev, "can't prepare/enable sata ref clock.\n");
goto put_sata_ref_clk;
}
@@ -104,11 +104,11 @@
return 0;
release_sata_ref_clk:
- clk_disable(sata_ref_clk);
+ clk_disable_unprepare(sata_ref_clk);
put_sata_ref_clk:
clk_put(sata_ref_clk);
release_sata_clk:
- clk_disable(sata_clk);
+ clk_disable_unprepare(sata_clk);
put_sata_clk:
clk_put(sata_clk);
@@ -117,10 +117,10 @@
static void imx_sata_exit(struct device *dev)
{
- clk_disable(sata_ref_clk);
+ clk_disable_unprepare(sata_ref_clk);
clk_put(sata_ref_clk);
- clk_disable(sata_clk);
+ clk_disable_unprepare(sata_clk);
clk_put(sata_clk);
}
diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/plat-mxc/epit.c
index d3467f8..9129c9e 100644
--- a/arch/arm/plat-mxc/epit.c
+++ b/arch/arm/plat-mxc/epit.c
@@ -203,7 +203,7 @@
void __init epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
{
- clk_enable(timer_clk);
+ clk_prepare_enable(timer_clk);
timer_base = base;
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
deleted file mode 100644
index 94b60dd4..0000000
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__
-#define __ASM_ARCH_MXC_BOARD_MX31ADS_H__
-
-#include <mach/hardware.h>
-
-/*
- * These symbols are used by drivers/net/cs89x0.c.
- * This is ugly as hell, but we have to provide them until
- * someone fixed the driver.
- */
-
-/* Base address of PBC controller */
-#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT
-/* Offsets for the PBC Controller register */
-
-/* Ethernet Controller IO base address */
-#define PBC_CS8900A_IOBASE 0x020000
-
-#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START)
-
-#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8)
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 6e192c4..8ddda36 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -24,7 +24,7 @@
#define UART_PADDR MX51_UART1_BASE_ADDR
#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART)
#define UART_PADDR MX53_UART1_BASE_ADDR
-#elif defined (CONFIG_DEBUG_IMX6Q_UART)
+#elif defined (CONFIG_DEBUG_IMX6Q_UART4)
#define UART_PADDR MX6Q_UART4_BASE_ADDR
#endif
diff --git a/arch/arm/plat-mxc/include/mach/dma.h b/arch/arm/plat-mxc/include/mach/dma.h
index 233d0a5..1b90803 100644
--- a/arch/arm/plat-mxc/include/mach/dma.h
+++ b/arch/arm/plat-mxc/include/mach/dma.h
@@ -60,8 +60,7 @@
static inline int imx_dma_is_general_purpose(struct dma_chan *chan)
{
- return !strcmp(dev_name(chan->device->dev), "imx31-sdma") ||
- !strcmp(dev_name(chan->device->dev), "imx35-sdma") ||
+ return strstr(dev_name(chan->device->dev), "sdma") ||
!strcmp(dev_name(chan->device->dev), "imx-dma");
}
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
deleted file mode 100644
index 13ad0df..0000000
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MXC_SYSTEM_H__
-#define __ASM_ARCH_MXC_SYSTEM_H__
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif /* __ASM_ARCH_MXC_SYSTEM_H__ */
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index e032717..c0cab22 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -132,7 +132,7 @@
int rc = 0;
if (!pwm->clk_enabled) {
- rc = clk_enable(pwm->clk);
+ rc = clk_prepare_enable(pwm->clk);
if (!rc)
pwm->clk_enabled = 1;
}
@@ -145,7 +145,7 @@
writel(0, pwm->mmio_base + MX3_PWMCR);
if (pwm->clk_enabled) {
- clk_disable(pwm->clk);
+ clk_disable_unprepare(pwm->clk);
pwm->clk_enabled = 0;
}
}
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 3599bf2..f30dcac 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -48,7 +48,7 @@
clk = clk_get_sys("imx2-wdt.0", NULL);
if (!IS_ERR(clk))
- clk_enable(clk);
+ clk_prepare_enable(clk);
wcr_enable = (1 << 2);
}
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 1c96cdb..7daf7c9 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -283,7 +283,7 @@
{
uint32_t tctl_val;
- clk_enable(timer_clk);
+ clk_prepare_enable(timer_clk);
timer_base = base;
diff --git a/arch/arm/plat-omap/include/plat/system.h b/arch/arm/plat-omap/include/plat/system.h
deleted file mode 100644
index 8e5ebd7..0000000
--- a/arch/arm/plat-omap/include/plat/system.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copied from arch/arm/mach-sa1100/include/mach/system.h
- * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net>
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/proc-fns.h>
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 21f1fda..32a0993 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -32,6 +32,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
+#include <mach/regs-clock.h>
#include <asm/irq.h>
#include <asm/cacheflush.h>
@@ -190,8 +191,34 @@
return __raw_readl(S3C2410_GSTATUS1);
}
+static void s3c24xx_default_idle(void)
+{
+ unsigned long tmp;
+ int i;
+
+ /* idle the system by using the idle mode which will wait for an
+ * interrupt to happen before restarting the system.
+ */
+
+ /* Warning: going into idle state upsets jtag scanning */
+
+ __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
+ S3C2410_CLKCON);
+
+ /* the samsung port seems to do a loop and then unset idle.. */
+ for (i = 0; i < 50; i++)
+ tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
+
+ /* this bit is not cleared on re-start... */
+
+ __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
+ S3C2410_CLKCON);
+}
+
void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
{
+ arm_pm_idle = s3c24xx_default_idle;
+
/* initialise the io descriptors we need for initialisation */
iotable_init(mach_desc, size);
iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
diff --git a/arch/arm/plat-samsung/include/plat/regs-rtc.h b/arch/arm/plat-samsung/include/plat/regs-rtc.h
index 30b7cc1..0f8263e 100644
--- a/arch/arm/plat-samsung/include/plat/regs-rtc.h
+++ b/arch/arm/plat-samsung/include/plat/regs-rtc.h
@@ -18,51 +18,54 @@
#define S3C2410_INTP_ALM (1 << 1)
#define S3C2410_INTP_TIC (1 << 0)
-#define S3C2410_RTCCON S3C2410_RTCREG(0x40)
-#define S3C2410_RTCCON_RTCEN (1<<0)
-#define S3C2410_RTCCON_CLKSEL (1<<1)
-#define S3C2410_RTCCON_CNTSEL (1<<2)
-#define S3C2410_RTCCON_CLKRST (1<<3)
-#define S3C64XX_RTCCON_TICEN (1<<8)
+#define S3C2410_RTCCON S3C2410_RTCREG(0x40)
+#define S3C2410_RTCCON_RTCEN (1 << 0)
+#define S3C2410_RTCCON_CNTSEL (1 << 2)
+#define S3C2410_RTCCON_CLKRST (1 << 3)
+#define S3C2443_RTCCON_TICSEL (1 << 4)
+#define S3C64XX_RTCCON_TICEN (1 << 8)
-#define S3C64XX_RTCCON_TICMSK (0xF<<7)
-#define S3C64XX_RTCCON_TICSHT (7)
+#define S3C2410_TICNT S3C2410_RTCREG(0x44)
+#define S3C2410_TICNT_ENABLE (1 << 7)
-#define S3C2410_TICNT S3C2410_RTCREG(0x44)
-#define S3C2410_TICNT_ENABLE (1<<7)
+/* S3C2443: tick count is 15 bit wide
+ * TICNT[6:0] contains upper 7 bits
+ * TICNT1[7:0] contains lower 8 bits
+ */
+#define S3C2443_TICNT_PART(x) ((x & 0x7f00) >> 8)
+#define S3C2443_TICNT1 S3C2410_RTCREG(0x4C)
+#define S3C2443_TICNT1_PART(x) (x & 0xff)
-#define S3C2410_RTCALM S3C2410_RTCREG(0x50)
-#define S3C2410_RTCALM_ALMEN (1<<6)
-#define S3C2410_RTCALM_YEAREN (1<<5)
-#define S3C2410_RTCALM_MONEN (1<<4)
-#define S3C2410_RTCALM_DAYEN (1<<3)
-#define S3C2410_RTCALM_HOUREN (1<<2)
-#define S3C2410_RTCALM_MINEN (1<<1)
-#define S3C2410_RTCALM_SECEN (1<<0)
+/* S3C2416: tick count is 32 bit wide
+ * TICNT[6:0] contains bits [14:8]
+ * TICNT1[7:0] contains lower 8 bits
+ * TICNT2[16:0] contains upper 17 bits
+ */
+#define S3C2416_TICNT2 S3C2410_RTCREG(0x48)
+#define S3C2416_TICNT2_PART(x) ((x & 0xffff8000) >> 15)
-#define S3C2410_RTCALM_ALL \
- S3C2410_RTCALM_ALMEN | S3C2410_RTCALM_YEAREN | S3C2410_RTCALM_MONEN |\
- S3C2410_RTCALM_DAYEN | S3C2410_RTCALM_HOUREN | S3C2410_RTCALM_MINEN |\
- S3C2410_RTCALM_SECEN
+#define S3C2410_RTCALM S3C2410_RTCREG(0x50)
+#define S3C2410_RTCALM_ALMEN (1 << 6)
+#define S3C2410_RTCALM_YEAREN (1 << 5)
+#define S3C2410_RTCALM_MONEN (1 << 4)
+#define S3C2410_RTCALM_DAYEN (1 << 3)
+#define S3C2410_RTCALM_HOUREN (1 << 2)
+#define S3C2410_RTCALM_MINEN (1 << 1)
+#define S3C2410_RTCALM_SECEN (1 << 0)
+#define S3C2410_ALMSEC S3C2410_RTCREG(0x54)
+#define S3C2410_ALMMIN S3C2410_RTCREG(0x58)
+#define S3C2410_ALMHOUR S3C2410_RTCREG(0x5c)
-#define S3C2410_ALMSEC S3C2410_RTCREG(0x54)
-#define S3C2410_ALMMIN S3C2410_RTCREG(0x58)
-#define S3C2410_ALMHOUR S3C2410_RTCREG(0x5c)
+#define S3C2410_ALMDATE S3C2410_RTCREG(0x60)
+#define S3C2410_ALMMON S3C2410_RTCREG(0x64)
+#define S3C2410_ALMYEAR S3C2410_RTCREG(0x68)
-#define S3C2410_ALMDATE S3C2410_RTCREG(0x60)
-#define S3C2410_ALMMON S3C2410_RTCREG(0x64)
-#define S3C2410_ALMYEAR S3C2410_RTCREG(0x68)
-
-#define S3C2410_RTCRST S3C2410_RTCREG(0x6c)
-
-#define S3C2410_RTCSEC S3C2410_RTCREG(0x70)
-#define S3C2410_RTCMIN S3C2410_RTCREG(0x74)
-#define S3C2410_RTCHOUR S3C2410_RTCREG(0x78)
-#define S3C2410_RTCDATE S3C2410_RTCREG(0x7c)
-#define S3C2410_RTCDAY S3C2410_RTCREG(0x80)
-#define S3C2410_RTCMON S3C2410_RTCREG(0x84)
-#define S3C2410_RTCYEAR S3C2410_RTCREG(0x88)
-
+#define S3C2410_RTCSEC S3C2410_RTCREG(0x70)
+#define S3C2410_RTCMIN S3C2410_RTCREG(0x74)
+#define S3C2410_RTCHOUR S3C2410_RTCREG(0x78)
+#define S3C2410_RTCDATE S3C2410_RTCREG(0x7c)
+#define S3C2410_RTCMON S3C2410_RTCREG(0x84)
+#define S3C2410_RTCYEAR S3C2410_RTCREG(0x88)
#endif /* __ASM_ARCH_REGS_RTC_H */
diff --git a/arch/arm/plat-samsung/include/plat/rtc-core.h b/arch/arm/plat-samsung/include/plat/rtc-core.h
new file mode 100644
index 0000000..21d8594
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/rtc-core.h
@@ -0,0 +1,27 @@
+/* linux/arch/arm/plat-samsung/include/plat/rtc-core.h
+ *
+ * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de>
+ *
+ * Samsung RTC Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_RTC_CORE_H
+#define __ASM_PLAT_RTC_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_rtc_setname(char *name)
+{
+#if defined(CONFIG_SAMSUNG_DEV_RTC) || defined(CONFIG_PLAT_S3C24XX)
+ s3c_device_rtc.name = name;
+#endif
+}
+
+#endif /* __ASM_PLAT_RTC_CORE_H */
diff --git a/arch/arm/plat-spear/include/plat/system.h b/arch/arm/plat-spear/include/plat/system.h
deleted file mode 100644
index 86c6f83..0000000
--- a/arch/arm/plat-spear/include/plat/system.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/system.h
- *
- * SPEAr platform specific architecture functions
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_SYSTEM_H
-#define __PLAT_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif /* __PLAT_SYSTEM_H */
diff --git a/arch/avr32/mach-at32ap/include/mach/cpu.h b/arch/avr32/mach-at32ap/include/mach/cpu.h
index 8181293..16a24b1 100644
--- a/arch/avr32/mach-at32ap/include/mach/cpu.h
+++ b/arch/avr32/mach-at32ap/include/mach/cpu.h
@@ -30,9 +30,6 @@
#define cpu_is_at91sam9261() (0)
#define cpu_is_at91sam9263() (0)
#define cpu_is_at91sam9rl() (0)
-#define cpu_is_at91cap9() (0)
-#define cpu_is_at91cap9_revB() (0)
-#define cpu_is_at91cap9_revC() (0)
#define cpu_is_at91sam9g10() (0)
#define cpu_is_at91sam9g20() (0)
#define cpu_is_at91sam9g45() (0)
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index 54eaf96..01c2cf4 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -497,37 +497,22 @@
}
/**
- * amba_device_register - register an AMBA device
- * @dev: AMBA device to register
- * @parent: parent memory resource
+ * amba_device_add - add a previously allocated AMBA device structure
+ * @dev: AMBA device allocated by amba_device_alloc
+ * @parent: resource parent for this devices resources
*
- * Setup the AMBA device, reading the cell ID if present.
- * Claim the resource, and register the AMBA device with
- * the Linux device manager.
+ * Claim the resource, and read the device cell ID if not already
+ * initialized. Register the AMBA device with the Linux device
+ * manager.
*/
-int amba_device_register(struct amba_device *dev, struct resource *parent)
+int amba_device_add(struct amba_device *dev, struct resource *parent)
{
u32 size;
void __iomem *tmp;
int i, ret;
- device_initialize(&dev->dev);
-
- /*
- * Copy from device_add
- */
- if (dev->dev.init_name) {
- dev_set_name(&dev->dev, "%s", dev->dev.init_name);
- dev->dev.init_name = NULL;
- }
-
- dev->dev.release = amba_device_release;
- dev->dev.bus = &amba_bustype;
- dev->dev.dma_mask = &dev->dma_mask;
- dev->res.name = dev_name(&dev->dev);
-
- if (!dev->dev.coherent_dma_mask && dev->dma_mask)
- dev_warn(&dev->dev, "coherent dma mask is unset\n");
+ WARN_ON(dev->irq[0] == (unsigned int)-1);
+ WARN_ON(dev->irq[1] == (unsigned int)-1);
ret = request_resource(parent, &dev->res);
if (ret)
@@ -582,9 +567,9 @@
if (ret)
goto err_release;
- if (dev->irq[0] != NO_IRQ)
+ if (dev->irq[0] && dev->irq[0] != NO_IRQ)
ret = device_create_file(&dev->dev, &dev_attr_irq0);
- if (ret == 0 && dev->irq[1] != NO_IRQ)
+ if (ret == 0 && dev->irq[1] && dev->irq[1] != NO_IRQ)
ret = device_create_file(&dev->dev, &dev_attr_irq1);
if (ret == 0)
return ret;
@@ -596,6 +581,74 @@
err_out:
return ret;
}
+EXPORT_SYMBOL_GPL(amba_device_add);
+
+static void amba_device_initialize(struct amba_device *dev, const char *name)
+{
+ device_initialize(&dev->dev);
+ if (name)
+ dev_set_name(&dev->dev, "%s", name);
+ dev->dev.release = amba_device_release;
+ dev->dev.bus = &amba_bustype;
+ dev->dev.dma_mask = &dev->dma_mask;
+ dev->res.name = dev_name(&dev->dev);
+}
+
+/**
+ * amba_device_alloc - allocate an AMBA device
+ * @name: sysfs name of the AMBA device
+ * @base: base of AMBA device
+ * @size: size of AMBA device
+ *
+ * Allocate and initialize an AMBA device structure. Returns %NULL
+ * on failure.
+ */
+struct amba_device *amba_device_alloc(const char *name, resource_size_t base,
+ size_t size)
+{
+ struct amba_device *dev;
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (dev) {
+ amba_device_initialize(dev, name);
+ dev->res.start = base;
+ dev->res.end = base + size - 1;
+ dev->res.flags = IORESOURCE_MEM;
+ }
+
+ return dev;
+}
+EXPORT_SYMBOL_GPL(amba_device_alloc);
+
+/**
+ * amba_device_register - register an AMBA device
+ * @dev: AMBA device to register
+ * @parent: parent memory resource
+ *
+ * Setup the AMBA device, reading the cell ID if present.
+ * Claim the resource, and register the AMBA device with
+ * the Linux device manager.
+ */
+int amba_device_register(struct amba_device *dev, struct resource *parent)
+{
+ amba_device_initialize(dev, dev->dev.init_name);
+ dev->dev.init_name = NULL;
+
+ if (!dev->dev.coherent_dma_mask && dev->dma_mask)
+ dev_warn(&dev->dev, "coherent dma mask is unset\n");
+
+ return amba_device_add(dev, parent);
+}
+
+/**
+ * amba_device_put - put an AMBA device
+ * @dev: AMBA device to put
+ */
+void amba_device_put(struct amba_device *dev)
+{
+ put_device(&dev->dev);
+}
+EXPORT_SYMBOL_GPL(amba_device_put);
/**
* amba_device_unregister - unregister an AMBA device
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 58832e5..8d1ab6f 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -196,7 +196,7 @@
dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
- clk_enable(i2c_imx->clk);
+ clk_prepare_enable(i2c_imx->clk);
writeb(i2c_imx->ifdr, i2c_imx->base + IMX_I2C_IFDR);
/* Enable I2C controller */
writeb(0, i2c_imx->base + IMX_I2C_I2SR);
@@ -245,7 +245,7 @@
/* Disable I2C controller */
writeb(0, i2c_imx->base + IMX_I2C_I2CR);
- clk_disable(i2c_imx->clk);
+ clk_disable_unprepare(i2c_imx->clk);
}
static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index 947faa5..efdb81d 100644
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -86,7 +86,6 @@
{
return ( cpu_is_at91sam9260()
|| cpu_is_at91sam9263()
- || cpu_is_at91cap9()
|| cpu_is_at91sam9rl()
|| cpu_is_at91sam9g10()
|| cpu_is_at91sam9g20()
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 0d955ff..304f2f9 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1325,7 +1325,7 @@
if (ret)
goto unmap;
- if (dev->irq[1] == NO_IRQ)
+ if (dev->irq[1] == NO_IRQ || !dev->irq[1])
host->singleirq = true;
else {
ret = request_irq(dev->irq[1], mmci_pio_irq, IRQF_SHARED,
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index d601e41..f4e82d4 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -463,7 +463,7 @@
err = PTR_ERR(clk);
goto err_clk_get;
}
- clk_enable(clk);
+ clk_prepare_enable(clk);
pltfm_host->clk = clk;
if (!is_imx25_esdhc(imx_data))
@@ -558,7 +558,7 @@
gpio_free(boarddata->wp_gpio);
no_card_detect_pin:
no_board_data:
- clk_disable(pltfm_host->clk);
+ clk_disable_unprepare(pltfm_host->clk);
clk_put(pltfm_host->clk);
err_clk_get:
kfree(imx_data);
@@ -585,7 +585,7 @@
gpio_free(boarddata->cd_gpio);
}
- clk_disable(pltfm_host->clk);
+ clk_disable_unprepare(pltfm_host->clk);
clk_put(pltfm_host->clk);
kfree(imx_data);
diff --git a/drivers/net/Space.c b/drivers/net/Space.c
index 068c356..88bbd8f 100644
--- a/drivers/net/Space.c
+++ b/drivers/net/Space.c
@@ -190,8 +190,10 @@
{seeq8005_probe, 0},
#endif
#ifdef CONFIG_CS89x0
+#ifndef CONFIG_CS89x0_PLATFORM
{cs89x0_probe, 0},
#endif
+#endif
#ifdef CONFIG_AT1700
{at1700_probe, 0},
#endif
diff --git a/drivers/net/ethernet/cirrus/Kconfig b/drivers/net/ethernet/cirrus/Kconfig
index 1f8648f..8388e36 100644
--- a/drivers/net/ethernet/cirrus/Kconfig
+++ b/drivers/net/ethernet/cirrus/Kconfig
@@ -5,8 +5,7 @@
config NET_VENDOR_CIRRUS
bool "Cirrus devices"
default y
- depends on ISA || EISA || MACH_IXDP2351 || ARCH_IXDP2X01 \
- || MACH_MX31ADS || MACH_QQ2440 || (ARM && ARCH_EP93XX) || MAC
+ depends on ISA || EISA || ARM || MAC
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
@@ -21,8 +20,7 @@
config CS89x0
tristate "CS89x0 support"
- depends on (ISA || EISA || MACH_IXDP2351 \
- || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440)
+ depends on ISA || EISA || ARM
---help---
Support for CS89x0 chipset based Ethernet cards. If you have a
network (Ethernet) card of this type, say Y and read the
@@ -33,10 +31,15 @@
To compile this driver as a module, choose M here. The module
will be called cs89x0.
-config CS89x0_NONISA_IRQ
- def_bool y
- depends on CS89x0 != n
- depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440
+config CS89x0_PLATFORM
+ bool "CS89x0 platform driver support"
+ depends on CS89x0
+ help
+ Say Y to compile the cs89x0 driver as a platform driver. This
+ makes this driver suitable for use on certain evaluation boards
+ such as the iMX21ADS.
+
+ If you are unsure, say N.
config EP93XX_ETH
tristate "EP93xx Ethernet support"
diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c
index f328da2..7202ca9 100644
--- a/drivers/net/ethernet/cirrus/cs89x0.c
+++ b/drivers/net/ethernet/cirrus/cs89x0.c
@@ -100,9 +100,6 @@
*/
-/* Always include 'config.h' first in case the user wants to turn on
- or override something. */
-#include <linux/module.h>
/*
* Set this to zero to disable DMA code
@@ -131,9 +128,12 @@
*/
+#include <linux/module.h>
+#include <linux/printk.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/fcntl.h>
@@ -151,6 +151,7 @@
#include <asm/system.h>
#include <asm/io.h>
#include <asm/irq.h>
+#include <linux/atomic.h>
#if ALLOW_DMA
#include <asm/dma.h>
#endif
@@ -174,26 +175,20 @@
them to system IRQ numbers. This mapping is card specific and is set to
the configuration of the Cirrus Eval board for this chip. */
#if defined(CONFIG_MACH_IXDP2351)
+#define CS89x0_NONISA_IRQ
static unsigned int netcard_portlist[] __used __initdata = {IXDP2351_VIRT_CS8900_BASE, 0};
static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0};
#elif defined(CONFIG_ARCH_IXDP2X01)
+#define CS89x0_NONISA_IRQ
static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
-#elif defined(CONFIG_MACH_QQ2440)
-#include <mach/qq2440.h>
-static unsigned int netcard_portlist[] __used __initdata = { QQ2440_CS8900_VIRT_BASE + 0x300, 0 };
-static unsigned int cs8900_irq_map[] = { QQ2440_CS8900_IRQ, 0, 0, 0 };
-#elif defined(CONFIG_MACH_MX31ADS)
-#include <mach/board-mx31ads.h>
-static unsigned int netcard_portlist[] __used __initdata = {
- PBC_BASE_ADDRESS + PBC_CS8900A_IOBASE + 0x300, 0
-};
-static unsigned cs8900_irq_map[] = {EXPIO_INT_ENET_INT, 0, 0, 0};
#else
+#ifndef CONFIG_CS89x0_PLATFORM
static unsigned int netcard_portlist[] __used __initdata =
{ 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
static unsigned int cs8900_irq_map[] = {10,11,12,5};
#endif
+#endif
#if DEBUGGING
static unsigned int net_debug = DEBUGGING;
@@ -236,11 +231,16 @@
unsigned char *end_dma_buff; /* points to the end of the buffer */
unsigned char *rx_dma_ptr; /* points to the next packet */
#endif
+#ifdef CONFIG_CS89x0_PLATFORM
+ void __iomem *virt_addr;/* Virtual address for accessing the CS89x0. */
+ unsigned long phys_addr;/* Physical address for accessing the CS89x0. */
+ unsigned long size; /* Length of CS89x0 memory region. */
+#endif
};
/* Index to functions, as function prototypes. */
-static int cs89x0_probe1(struct net_device *dev, int ioaddr, int modular);
+static int cs89x0_probe1(struct net_device *dev, unsigned long ioaddr, int modular);
static int net_open(struct net_device *dev);
static netdev_tx_t net_send_packet(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t net_interrupt(int irq, void *dev_id);
@@ -294,6 +294,7 @@
__setup("cs89x0_media=", media_fn);
+#ifndef CONFIG_CS89x0_PLATFORM
/* Check for a network adaptor of this type, and return '0' iff one exists.
If dev->base_addr == 0, probe all likely locations.
If dev->base_addr == 1, always return failure.
@@ -343,6 +344,7 @@
return ERR_PTR(err);
}
#endif
+#endif
#if defined(CONFIG_MACH_IXDP2351)
static u16
@@ -504,7 +506,7 @@
*/
static int __init
-cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
+cs89x0_probe1(struct net_device *dev, unsigned long ioaddr, int modular)
{
struct net_local *lp = netdev_priv(dev);
static unsigned version_printed;
@@ -529,15 +531,12 @@
lp->force = g_cs89x0_media__force;
#endif
-#if defined(CONFIG_MACH_QQ2440)
- lp->force |= FORCE_RJ45 | FORCE_FULL;
-#endif
}
/* Grab the region so we can find another board if autoIRQ fails. */
/* WTF is going on here? */
if (!request_region(ioaddr & ~3, NETCARD_IO_EXTENT, DRV_NAME)) {
- printk(KERN_ERR "%s: request_region(0x%x, 0x%x) failed\n",
+ printk(KERN_ERR "%s: request_region(0x%lx, 0x%x) failed\n",
DRV_NAME, ioaddr, NETCARD_IO_EXTENT);
retval = -EBUSY;
goto out1;
@@ -549,7 +548,7 @@
will skip the test for the ADD_PORT. */
if (ioaddr & 1) {
if (net_debug > 1)
- printk(KERN_INFO "%s: odd ioaddr 0x%x\n", dev->name, ioaddr);
+ printk(KERN_INFO "%s: odd ioaddr 0x%lx\n", dev->name, ioaddr);
if ((ioaddr & 2) != 2)
if ((readword(ioaddr & ~3, ADD_PORT) & ADD_MASK) != ADD_SIG) {
printk(KERN_ERR "%s: bad signature 0x%x\n",
@@ -560,13 +559,13 @@
}
ioaddr &= ~3;
- printk(KERN_DEBUG "PP_addr at %x[%x]: 0x%x\n",
+ printk(KERN_DEBUG "PP_addr at %lx[%x]: 0x%x\n",
ioaddr, ADD_PORT, readword(ioaddr, ADD_PORT));
writeword(ioaddr, ADD_PORT, PP_ChipID);
tmp = readword(ioaddr, DATA_PORT);
if (tmp != CHIP_EISA_ID_SIG) {
- printk(KERN_DEBUG "%s: incorrect signature at %x[%x]: 0x%x!="
+ printk(KERN_DEBUG "%s: incorrect signature at %lx[%x]: 0x%x!="
CHIP_EISA_ID_SIG_STR "\n",
dev->name, ioaddr, DATA_PORT, tmp);
retval = -ENODEV;
@@ -736,8 +735,9 @@
dev->irq = i;
} else {
i = lp->isa_config & INT_NO_MASK;
+#ifndef CONFIG_CS89x0_PLATFORM
if (lp->chip_type == CS8900) {
-#ifdef CONFIG_CS89x0_NONISA_IRQ
+#ifdef CS89x0_NONISA_IRQ
i = cs8900_irq_map[0];
#else
/* Translate the IRQ using the IRQ mapping table. */
@@ -758,6 +758,7 @@
}
#endif
}
+#endif
if (!dev->irq)
dev->irq = i;
}
@@ -1168,6 +1169,7 @@
int i;
if (chip_type == CS8900) {
+#ifndef CONFIG_CS89x0_PLATFORM
/* Search the mapping table for the corresponding IRQ pin. */
for (i = 0; i != ARRAY_SIZE(cs8900_irq_map); i++)
if (cs8900_irq_map[i] == irq)
@@ -1175,6 +1177,10 @@
/* Not found */
if (i == ARRAY_SIZE(cs8900_irq_map))
i = 3;
+#else
+ /* INTRQ0 pin is used for interrupt generation. */
+ i = 0;
+#endif
writereg(dev, PP_CS8900_ISAINT, i);
} else {
writereg(dev, PP_CS8920_ISAINT, irq);
@@ -1228,7 +1234,7 @@
}
else
{
-#ifndef CONFIG_CS89x0_NONISA_IRQ
+#if !defined(CS89x0_NONISA_IRQ) && !defined(CONFIG_CS89x0_PLATFORM)
if (((1 << dev->irq) & lp->irq_map) == 0) {
printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n",
dev->name, dev->irq, lp->irq_map);
@@ -1746,7 +1752,7 @@
return 0;
}
-#ifdef MODULE
+#if defined(MODULE) && !defined(CONFIG_CS89x0_PLATFORM)
static struct net_device *dev_cs89x0;
@@ -1900,7 +1906,97 @@
release_region(dev_cs89x0->base_addr, NETCARD_IO_EXTENT);
free_netdev(dev_cs89x0);
}
-#endif /* MODULE */
+#endif /* MODULE && !CONFIG_CS89x0_PLATFORM */
+
+#ifdef CONFIG_CS89x0_PLATFORM
+static int __init cs89x0_platform_probe(struct platform_device *pdev)
+{
+ struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
+ struct net_local *lp;
+ struct resource *mem_res;
+ int err;
+
+ if (!dev)
+ return -ENOMEM;
+
+ lp = netdev_priv(dev);
+
+ mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ dev->irq = platform_get_irq(pdev, 0);
+ if (mem_res == NULL || dev->irq <= 0) {
+ dev_warn(&dev->dev, "memory/interrupt resource missing.\n");
+ err = -ENXIO;
+ goto free;
+ }
+
+ lp->phys_addr = mem_res->start;
+ lp->size = resource_size(mem_res);
+ if (!request_mem_region(lp->phys_addr, lp->size, DRV_NAME)) {
+ dev_warn(&dev->dev, "request_mem_region() failed.\n");
+ err = -EBUSY;
+ goto free;
+ }
+
+ lp->virt_addr = ioremap(lp->phys_addr, lp->size);
+ if (!lp->virt_addr) {
+ dev_warn(&dev->dev, "ioremap() failed.\n");
+ err = -ENOMEM;
+ goto release;
+ }
+
+ err = cs89x0_probe1(dev, (unsigned long)lp->virt_addr, 0);
+ if (err) {
+ dev_warn(&dev->dev, "no cs8900 or cs8920 detected.\n");
+ goto unmap;
+ }
+
+ platform_set_drvdata(pdev, dev);
+ return 0;
+
+unmap:
+ iounmap(lp->virt_addr);
+release:
+ release_mem_region(lp->phys_addr, lp->size);
+free:
+ free_netdev(dev);
+ return err;
+}
+
+static int cs89x0_platform_remove(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct net_local *lp = netdev_priv(dev);
+
+ unregister_netdev(dev);
+ iounmap(lp->virt_addr);
+ release_mem_region(lp->phys_addr, lp->size);
+ free_netdev(dev);
+ return 0;
+}
+
+static struct platform_driver cs89x0_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .remove = cs89x0_platform_remove,
+};
+
+static int __init cs89x0_init(void)
+{
+ return platform_driver_probe(&cs89x0_driver, cs89x0_platform_probe);
+}
+
+module_init(cs89x0_init);
+
+static void __exit cs89x0_cleanup(void)
+{
+ platform_driver_unregister(&cs89x0_driver);
+}
+
+module_exit(cs89x0_cleanup);
+
+#endif /* CONFIG_CS89x0_PLATFORM */
/*
* Local variables:
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index 63b3ec4..cae9477 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -253,7 +253,7 @@
if (!of_device_is_available(node))
return NULL;
- dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ dev = amba_device_alloc(NULL, 0, 0);
if (!dev)
return NULL;
@@ -283,14 +283,14 @@
if (ret)
goto err_free;
- ret = amba_device_register(dev, &iomem_resource);
+ ret = amba_device_add(dev, &iomem_resource);
if (ret)
goto err_free;
return dev;
err_free:
- kfree(dev);
+ amba_device_put(dev);
return NULL;
}
#else /* CONFIG_ARM_AMBA */
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index aef40bd..7895186 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -35,6 +35,8 @@
enum s3c_cpu_type {
TYPE_S3C2410,
+ TYPE_S3C2416,
+ TYPE_S3C2443,
TYPE_S3C64XX,
};
@@ -132,6 +134,7 @@
struct platform_device *pdev = to_platform_device(dev);
struct rtc_device *rtc_dev = platform_get_drvdata(pdev);
unsigned int tmp = 0;
+ int val;
if (!is_power_of_2(freq))
return -EINVAL;
@@ -139,12 +142,22 @@
clk_enable(rtc_clk);
spin_lock_irq(&s3c_rtc_pie_lock);
- if (s3c_rtc_cpu_type == TYPE_S3C2410) {
+ if (s3c_rtc_cpu_type != TYPE_S3C64XX) {
tmp = readb(s3c_rtc_base + S3C2410_TICNT);
tmp &= S3C2410_TICNT_ENABLE;
}
- tmp |= (rtc_dev->max_user_freq / freq)-1;
+ val = (rtc_dev->max_user_freq / freq) - 1;
+
+ if (s3c_rtc_cpu_type == TYPE_S3C2416 || s3c_rtc_cpu_type == TYPE_S3C2443) {
+ tmp |= S3C2443_TICNT_PART(val);
+ writel(S3C2443_TICNT1_PART(val), s3c_rtc_base + S3C2443_TICNT1);
+
+ if (s3c_rtc_cpu_type == TYPE_S3C2416)
+ writel(S3C2416_TICNT2_PART(val), s3c_rtc_base + S3C2416_TICNT2);
+ } else {
+ tmp |= val;
+ }
writel(tmp, s3c_rtc_base + S3C2410_TICNT);
spin_unlock_irq(&s3c_rtc_pie_lock);
@@ -371,7 +384,7 @@
tmp &= ~S3C2410_RTCCON_RTCEN;
writew(tmp, base + S3C2410_RTCCON);
- if (s3c_rtc_cpu_type == TYPE_S3C2410) {
+ if (s3c_rtc_cpu_type != TYPE_S3C64XX) {
tmp = readb(base + S3C2410_TICNT);
tmp &= ~S3C2410_TICNT_ENABLE;
writeb(tmp, base + S3C2410_TICNT);
@@ -428,12 +441,27 @@
return 0;
}
+static const struct of_device_id s3c_rtc_dt_match[];
+
+static inline int s3c_rtc_get_driver_data(struct platform_device *pdev)
+{
+#ifdef CONFIG_OF
+ if (pdev->dev.of_node) {
+ const struct of_device_id *match;
+ match = of_match_node(s3c_rtc_dt_match, pdev->dev.of_node);
+ return match->data;
+ }
+#endif
+ return platform_get_device_id(pdev)->driver_data;
+}
+
static int __devinit s3c_rtc_probe(struct platform_device *pdev)
{
struct rtc_device *rtc;
struct rtc_time rtc_tm;
struct resource *res;
int ret;
+ int tmp;
pr_debug("%s: probe=%p\n", __func__, pdev);
@@ -508,13 +536,7 @@
goto err_nortc;
}
-#ifdef CONFIG_OF
- if (pdev->dev.of_node)
- s3c_rtc_cpu_type = of_device_is_compatible(pdev->dev.of_node,
- "samsung,s3c6410-rtc") ? TYPE_S3C64XX : TYPE_S3C2410;
- else
-#endif
- s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data;
+ s3c_rtc_cpu_type = s3c_rtc_get_driver_data(pdev);
/* Check RTC Time */
@@ -533,11 +555,17 @@
dev_warn(&pdev->dev, "warning: invalid RTC value so initializing it\n");
}
- if (s3c_rtc_cpu_type == TYPE_S3C64XX)
+ if (s3c_rtc_cpu_type != TYPE_S3C2410)
rtc->max_user_freq = 32768;
else
rtc->max_user_freq = 128;
+ if (s3c_rtc_cpu_type == TYPE_S3C2416 || s3c_rtc_cpu_type == TYPE_S3C2443) {
+ tmp = readw(s3c_rtc_base + S3C2410_RTCCON);
+ tmp |= S3C2443_RTCCON_TICSEL;
+ writew(tmp, s3c_rtc_base + S3C2410_RTCCON);
+ }
+
platform_set_drvdata(pdev, rtc);
s3c_rtc_setfreq(&pdev->dev, 1);
@@ -638,8 +666,19 @@
#ifdef CONFIG_OF
static const struct of_device_id s3c_rtc_dt_match[] = {
- { .compatible = "samsung,s3c2410-rtc" },
- { .compatible = "samsung,s3c6410-rtc" },
+ {
+ .compatible = "samsung,s3c2410-rtc"
+ .data = TYPE_S3C2410,
+ }, {
+ .compatible = "samsung,s3c2416-rtc"
+ .data = TYPE_S3C2416,
+ }, {
+ .compatible = "samsung,s3c2443-rtc"
+ .data = TYPE_S3C2443,
+ }, {
+ .compatible = "samsung,s3c6410-rtc"
+ .data = TYPE_S3C64XX,
+ },
{},
};
MODULE_DEVICE_TABLE(of, s3c_rtc_dt_match);
@@ -652,6 +691,12 @@
.name = "s3c2410-rtc",
.driver_data = TYPE_S3C2410,
}, {
+ .name = "s3c2416-rtc",
+ .driver_data = TYPE_S3C2416,
+ }, {
+ .name = "s3c2443-rtc",
+ .driver_data = TYPE_S3C2443,
+ }, {
.name = "s3c64xx-rtc",
.driver_data = TYPE_S3C64XX,
},
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 0b7fed7..e7fecee 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1508,7 +1508,7 @@
ret = PTR_ERR(sport->clk);
goto unmap;
}
- clk_enable(sport->clk);
+ clk_prepare_enable(sport->clk);
sport->port.uartclk = clk_get_rate(sport->clk);
@@ -1531,8 +1531,8 @@
if (pdata && pdata->exit)
pdata->exit(pdev);
clkput:
+ clk_disable_unprepare(sport->clk);
clk_put(sport->clk);
- clk_disable(sport->clk);
unmap:
iounmap(sport->port.membase);
free:
@@ -1552,11 +1552,10 @@
if (sport) {
uart_remove_one_port(&imx_reg, &sport->port);
+ clk_disable_unprepare(sport->clk);
clk_put(sport->clk);
}
- clk_disable(sport->clk);
-
if (pdata && pdata->exit)
pdata->exit(pdev);
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 7ecb68a..85ae4b4 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -137,7 +137,7 @@
config USB_AT91
tristate "Atmel AT91 USB Device Port"
- depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9 && !ARCH_AT91SAM9G45
+ depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91SAM9G45
help
Many Atmel AT91 processors (such as the AT91RM2000) have a
full speed USB Device Port with support for five configurable
@@ -150,7 +150,7 @@
config USB_ATMEL_USBA
tristate "Atmel USBA"
select USB_GADGET_DUALSPEED
- depends on AVR32 || ARCH_AT91CAP9 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
+ depends on AVR32 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
help
USBA is the integrated high-speed USB Device controller on
the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
index 724c69c..a9fab83 100644
--- a/include/linux/amba/bus.h
+++ b/include/linux/amba/bus.h
@@ -60,6 +60,9 @@
int amba_driver_register(struct amba_driver *);
void amba_driver_unregister(struct amba_driver *);
+struct amba_device *amba_device_alloc(const char *, resource_size_t, size_t);
+void amba_device_put(struct amba_device *);
+int amba_device_add(struct amba_device *, struct resource *);
int amba_device_register(struct amba_device *, struct resource *);
void amba_device_unregister(struct amba_device *);
struct amba_device *amba_find_device(const char *, struct device *, unsigned int, unsigned int);
@@ -89,4 +92,37 @@
#define amba_manf(d) AMBA_MANF_BITS((d)->periphid)
#define amba_part(d) AMBA_PART_BITS((d)->periphid)
+#define __AMBA_DEV(busid, data, mask) \
+ { \
+ .coherent_dma_mask = mask, \
+ .init_name = busid, \
+ .platform_data = data, \
+ }
+
+/*
+ * APB devices do not themselves have the ability to address memory,
+ * so DMA masks should be zero (much like USB peripheral devices.)
+ * The DMA controller DMA masks should be used instead (much like
+ * USB host controllers in conventional PCs.)
+ */
+#define AMBA_APB_DEVICE(name, busid, id, base, irqs, data) \
+struct amba_device name##_device = { \
+ .dev = __AMBA_DEV(busid, data, 0), \
+ .res = DEFINE_RES_MEM(base, SZ_4K), \
+ .irq = irqs, \
+ .periphid = id, \
+}
+
+/*
+ * AHB devices are DMA capable, so set their DMA masks
+ */
+#define AMBA_AHB_DEVICE(name, busid, id, base, irqs, data) \
+struct amba_device name##_device = { \
+ .dev = __AMBA_DEV(busid, data, ~0ULL), \
+ .res = DEFINE_RES_MEM(base, SZ_4K), \
+ .dma_mask = ~0ULL, \
+ .irq = irqs, \
+ .periphid = id, \
+}
+
#endif