diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 617b0a7..6ece0ed 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -26,6 +26,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/slab.h>
+#include <linux/dmi.h>
 
 #include "xhci.h"
 
@@ -398,6 +399,95 @@
 
 #endif
 
+static void compliance_mode_recovery(unsigned long arg)
+{
+	struct xhci_hcd *xhci;
+	struct usb_hcd *hcd;
+	u32 temp;
+	int i;
+
+	xhci = (struct xhci_hcd *)arg;
+
+	for (i = 0; i < xhci->num_usb3_ports; i++) {
+		temp = xhci_readl(xhci, xhci->usb3_ports[i]);
+		if ((temp & PORT_PLS_MASK) == USB_SS_PORT_LS_COMP_MOD) {
+			/*
+			 * Compliance Mode Detected. Letting USB Core
+			 * handle the Warm Reset
+			 */
+			xhci_dbg(xhci, "Compliance Mode Detected->Port %d!\n",
+					i + 1);
+			xhci_dbg(xhci, "Attempting Recovery routine!\n");
+			hcd = xhci->shared_hcd;
+
+			if (hcd->state == HC_STATE_SUSPENDED)
+				usb_hcd_resume_root_hub(hcd);
+
+			usb_hcd_poll_rh_status(hcd);
+		}
+	}
+
+	if (xhci->port_status_u0 != ((1 << xhci->num_usb3_ports)-1))
+		mod_timer(&xhci->comp_mode_recovery_timer,
+			jiffies + msecs_to_jiffies(COMP_MODE_RCVRY_MSECS));
+}
+
+/*
+ * Quirk to work around issue generated by the SN65LVPE502CP USB3.0 re-driver
+ * that causes ports behind that hardware to enter compliance mode sometimes.
+ * The quirk creates a timer that polls every 2 seconds the link state of
+ * each host controller's port and recovers it by issuing a Warm reset
+ * if Compliance mode is detected, otherwise the port will become "dead" (no
+ * device connections or disconnections will be detected anymore). Becasue no
+ * status event is generated when entering compliance mode (per xhci spec),
+ * this quirk is needed on systems that have the failing hardware installed.
+ */
+static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci)
+{
+	xhci->port_status_u0 = 0;
+	init_timer(&xhci->comp_mode_recovery_timer);
+
+	xhci->comp_mode_recovery_timer.data = (unsigned long) xhci;
+	xhci->comp_mode_recovery_timer.function = compliance_mode_recovery;
+	xhci->comp_mode_recovery_timer.expires = jiffies +
+			msecs_to_jiffies(COMP_MODE_RCVRY_MSECS);
+
+	set_timer_slack(&xhci->comp_mode_recovery_timer,
+			msecs_to_jiffies(COMP_MODE_RCVRY_MSECS));
+	add_timer(&xhci->comp_mode_recovery_timer);
+	xhci_dbg(xhci, "Compliance Mode Recovery Timer Initialized.\n");
+}
+
+/*
+ * This function identifies the systems that have installed the SN65LVPE502CP
+ * USB3.0 re-driver and that need the Compliance Mode Quirk.
+ * Systems:
+ * Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820
+ */
+static bool compliance_mode_recovery_timer_quirk_check(void)
+{
+	const char *dmi_product_name, *dmi_sys_vendor;
+
+	dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
+	dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+
+	if (!(strstr(dmi_sys_vendor, "Hewlett-Packard")))
+		return false;
+
+	if (strstr(dmi_product_name, "Z420") ||
+			strstr(dmi_product_name, "Z620") ||
+			strstr(dmi_product_name, "Z820"))
+		return true;
+
+	return false;
+}
+
+static int xhci_all_ports_seen_u0(struct xhci_hcd *xhci)
+{
+	return (xhci->port_status_u0 == ((1 << xhci->num_usb3_ports)-1));
+}
+
+
 /*
  * Initialize memory for HCD and xHC (one-time init).
  *
@@ -421,6 +511,12 @@
 	retval = xhci_mem_init(xhci, GFP_KERNEL);
 	xhci_dbg(xhci, "Finished xhci_init\n");
 
+	/* Initializing Compliance Mode Recovery Data If Needed */
+	if (compliance_mode_recovery_timer_quirk_check()) {
+		xhci->quirks |= XHCI_COMP_MODE_QUIRK;
+		compliance_mode_recovery_timer_init(xhci);
+	}
+
 	return retval;
 }
 
@@ -629,6 +725,11 @@
 	del_timer_sync(&xhci->event_ring_timer);
 #endif
 
+	/* Deleting Compliance Mode Recovery Timer */
+	if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+			(!(xhci_all_ports_seen_u0(xhci))))
+		del_timer_sync(&xhci->comp_mode_recovery_timer);
+
 	if (xhci->quirks & XHCI_AMD_PLL_FIX)
 		usb_amd_dev_put();
 
@@ -806,6 +907,16 @@
 	}
 	spin_unlock_irq(&xhci->lock);
 
+	/*
+	 * Deleting Compliance Mode Recovery Timer because the xHCI Host
+	 * is about to be suspended.
+	 */
+	if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+			(!(xhci_all_ports_seen_u0(xhci)))) {
+		del_timer_sync(&xhci->comp_mode_recovery_timer);
+		xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted!\n");
+	}
+
 	/* step 5: remove core well power */
 	/* synchronize irq when using MSI-X */
 	xhci_msix_sync_irqs(xhci);
@@ -938,6 +1049,16 @@
 		usb_hcd_resume_root_hub(hcd);
 		usb_hcd_resume_root_hub(xhci->shared_hcd);
 	}
+
+	/*
+	 * If system is subject to the Quirk, Compliance Mode Timer needs to
+	 * be re-initialized Always after a system resume. Ports are subject
+	 * to suffer the Compliance Mode issue again. It doesn't matter if
+	 * ports have entered previously to U0 before system's suspension.
+	 */
+	if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
+		compliance_mode_recovery_timer_init(xhci);
+
 	return retval;
 }
 #endif	/* CONFIG_PM */