commit 722003ac40c2c397bd5bc2b714125bc82ab27043
author Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Tue Jun 21 09:36:21 2016 -0400
committer David S. Miller <davem@davemloft.net> Thu Jun 23 15:56:46 2016 -0400
tree ff93a5075ef810931d0434d42d0fd55b68ff7ae0
parent dc14341ed6b4e9d0a1d68c437a7ba84a621f1714

qed: Add support for coalescing config read/update.

This patch adds support for configuring the device tx/rx coalescing
timeout values in the order of micro seconds. It also adds APIs for
upper layer drivers for reading/updating the coalescing values.

Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/qlogic/qed/qed_dev.c

diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c
index e45cff4..b26fe26 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dev.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c
@@ -2222,6 +2222,110 @@
 	return 0;
 }
 
+static int qed_set_coalesce(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
+			    u32 hw_addr, void *p_eth_qzone,
+			    size_t eth_qzone_size, u8 timeset)
+{
+	struct coalescing_timeset *p_coal_timeset;
+
+	if (p_hwfn->cdev->int_coalescing_mode != QED_COAL_MODE_ENABLE) {
+		DP_NOTICE(p_hwfn, "Coalescing configuration not enabled\n");
+		return -EINVAL;
+	}
+
+	p_coal_timeset = p_eth_qzone;
+	memset(p_coal_timeset, 0, eth_qzone_size);
+	SET_FIELD(p_coal_timeset->value, COALESCING_TIMESET_TIMESET, timeset);
+	SET_FIELD(p_coal_timeset->value, COALESCING_TIMESET_VALID, 1);
+	qed_memcpy_to(p_hwfn, p_ptt, hw_addr, p_eth_qzone, eth_qzone_size);
+
+	return 0;
+}
+
+int qed_set_rxq_coalesce(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
+			 u16 coalesce, u8 qid, u16 sb_id)
+{
+	struct ustorm_eth_queue_zone eth_qzone;
+	u8 timeset, timer_res;
+	u16 fw_qid = 0;
+	u32 address;
+	int rc;
+
+	/* Coalesce = (timeset << timer-resolution), timeset is 7bit wide */
+	if (coalesce <= 0x7F) {
+		timer_res = 0;
+	} else if (coalesce <= 0xFF) {
+		timer_res = 1;
+	} else if (coalesce <= 0x1FF) {
+		timer_res = 2;
+	} else {
+		DP_ERR(p_hwfn, "Invalid coalesce value - %d\n", coalesce);
+		return -EINVAL;
+	}
+	timeset = (u8)(coalesce >> timer_res);
+
+	rc = qed_fw_l2_queue(p_hwfn, (u16)qid, &fw_qid);
+	if (rc)
+		return rc;
+
+	rc = qed_int_set_timer_res(p_hwfn, p_ptt, timer_res, sb_id, false);
+	if (rc)
+		goto out;
+
+	address = BAR0_MAP_REG_USDM_RAM + USTORM_ETH_QUEUE_ZONE_OFFSET(fw_qid);
+
+	rc = qed_set_coalesce(p_hwfn, p_ptt, address, &eth_qzone,
+			      sizeof(struct ustorm_eth_queue_zone), timeset);
+	if (rc)
+		goto out;
+
+	p_hwfn->cdev->rx_coalesce_usecs = coalesce;
+out:
+	return rc;
+}
+
+int qed_set_txq_coalesce(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
+			 u16 coalesce, u8 qid, u16 sb_id)
+{
+	struct xstorm_eth_queue_zone eth_qzone;
+	u8 timeset, timer_res;
+	u16 fw_qid = 0;
+	u32 address;
+	int rc;
+
+	/* Coalesce = (timeset << timer-resolution), timeset is 7bit wide */
+	if (coalesce <= 0x7F) {
+		timer_res = 0;
+	} else if (coalesce <= 0xFF) {
+		timer_res = 1;
+	} else if (coalesce <= 0x1FF) {
+		timer_res = 2;
+	} else {
+		DP_ERR(p_hwfn, "Invalid coalesce value - %d\n", coalesce);
+		return -EINVAL;
+	}
+	timeset = (u8)(coalesce >> timer_res);
+
+	rc = qed_fw_l2_queue(p_hwfn, (u16)qid, &fw_qid);
+	if (rc)
+		return rc;
+
+	rc = qed_int_set_timer_res(p_hwfn, p_ptt, timer_res, sb_id, true);
+	if (rc)
+		goto out;
+
+	address = BAR0_MAP_REG_XSDM_RAM + XSTORM_ETH_QUEUE_ZONE_OFFSET(fw_qid);
+
+	rc = qed_set_coalesce(p_hwfn, p_ptt, address, &eth_qzone,
+			      sizeof(struct xstorm_eth_queue_zone), timeset);
+	if (rc)
+		goto out;
+
+	p_hwfn->cdev->tx_coalesce_usecs = coalesce;
+out:
+	return rc;
+}
+
 /* Calculate final WFQ values for all vports and configure them.
  * After this configuration each vport will have
  * approx min rate =  min_pf_rate * (vport_wfq / QED_WFQ_UNIT)