video: support MIPI-DSI controller driver

Samsung S5PC210 and EXYNOS SoC platform has MIPI-DSI controller and
MIPI-DSI based LCD Panel could be used with it.  This patch supports
MIPI-DSI driver based Samsung SoC chip.

LCD panel driver based MIPI-DSI should be registered to MIPI-DSI driver at
machine code and LCD panel driver specific function registered to
mipi_dsim_ddi structure at lcd panel init function called system init.  In
the MIPI-DSI driver, find lcd panel driver by using registered lcd panel
name, and then initialize lcd panel driver.

Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
diff --git a/include/video/exynos_mipi_dsim.h b/include/video/exynos_mipi_dsim.h
new file mode 100644
index 0000000..772c770
--- /dev/null
+++ b/include/video/exynos_mipi_dsim.h
@@ -0,0 +1,359 @@
+/* include/video/exynos_mipi_dsim.h
+ *
+ * Platform data header for Samsung SoC MIPI-DSIM.
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd
+ *
+ * InKi Dae <inki.dae@samsung.com>
+ * Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _EXYNOS_MIPI_DSIM_H
+#define _EXYNOS_MIPI_DSIM_H
+
+#include <linux/device.h>
+#include <linux/fb.h>
+
+#define PANEL_NAME_SIZE		(32)
+
+/*
+ * Enumerate display interface type.
+ *
+ * DSIM_COMMAND means cpu interface and rgb interface for DSIM_VIDEO.
+ *
+ * P.S. MIPI DSI Master has two display controller intefaces, RGB Interface
+ *	for main display and CPU Interface(same as I80 Interface) for main
+ *	and sub display.
+ */
+enum mipi_dsim_interface_type {
+	DSIM_COMMAND,
+	DSIM_VIDEO
+};
+
+enum mipi_dsim_virtual_ch_no {
+	DSIM_VIRTUAL_CH_0,
+	DSIM_VIRTUAL_CH_1,
+	DSIM_VIRTUAL_CH_2,
+	DSIM_VIRTUAL_CH_3
+};
+
+enum mipi_dsim_burst_mode_type {
+	DSIM_NON_BURST_SYNC_EVENT,
+	DSIM_BURST_SYNC_EVENT,
+	DSIM_NON_BURST_SYNC_PULSE,
+	DSIM_BURST,
+	DSIM_NON_VIDEO_MODE
+};
+
+enum mipi_dsim_no_of_data_lane {
+	DSIM_DATA_LANE_1,
+	DSIM_DATA_LANE_2,
+	DSIM_DATA_LANE_3,
+	DSIM_DATA_LANE_4
+};
+
+enum mipi_dsim_byte_clk_src {
+	DSIM_PLL_OUT_DIV8,
+	DSIM_EXT_CLK_DIV8,
+	DSIM_EXT_CLK_BYPASS
+};
+
+enum mipi_dsim_pixel_format {
+	DSIM_CMD_3BPP,
+	DSIM_CMD_8BPP,
+	DSIM_CMD_12BPP,
+	DSIM_CMD_16BPP,
+	DSIM_VID_16BPP_565,
+	DSIM_VID_18BPP_666PACKED,
+	DSIM_18BPP_666LOOSELYPACKED,
+	DSIM_24BPP_888
+};
+
+/*
+ * struct mipi_dsim_config - interface for configuring mipi-dsi controller.
+ *
+ * @auto_flush: enable or disable Auto flush of MD FIFO using VSYNC pulse.
+ * @eot_disable: enable or disable EoT packet in HS mode.
+ * @auto_vertical_cnt: specifies auto vertical count mode.
+ *	in Video mode, the vertical line transition uses line counter
+ *	configured by VSA, VBP, and Vertical resolution.
+ *	If this bit is set to '1', the line counter does not use VSA and VBP
+ *	registers.(in command mode, this variable is ignored)
+ * @hse: set horizontal sync event mode.
+ *	In VSYNC pulse and Vporch area, MIPI DSI master transfers only HSYNC
+ *	start packet to MIPI DSI slave at MIPI DSI spec1.1r02.
+ *	this bit transfers HSYNC end packet in VSYNC pulse and Vporch area
+ *	(in mommand mode, this variable is ignored)
+ * @hfp: specifies HFP disable mode.
+ *	if this variable is set, DSI master ignores HFP area in VIDEO mode.
+ *	(in command mode, this variable is ignored)
+ * @hbp: specifies HBP disable mode.
+ *	if this variable is set, DSI master ignores HBP area in VIDEO mode.
+ *	(in command mode, this variable is ignored)
+ * @hsa: specifies HSA disable mode.
+ *	if this variable is set, DSI master ignores HSA area in VIDEO mode.
+ *	(in command mode, this variable is ignored)
+ * @cma_allow: specifies the number of horizontal lines, where command packet
+ *	transmission is allowed after Stable VFP period.
+ * @e_interface: specifies interface to be used.(CPU or RGB interface)
+ * @e_virtual_ch: specifies virtual channel number that main or
+ *	sub diaplsy uses.
+ * @e_pixel_format: specifies pixel stream format for main or sub display.
+ * @e_burst_mode: selects Burst mode in Video mode.
+ *	in Non-burst mode, RGB data area is filled with RGB data and NULL
+ *	packets, according to input bandwidth of RGB interface.
+ *	In Burst mode, RGB data area is filled with RGB data only.
+ * @e_no_data_lane: specifies data lane count to be used by Master.
+ * @e_byte_clk: select byte clock source. (it must be DSIM_PLL_OUT_DIV8)
+ *	DSIM_EXT_CLK_DIV8 and DSIM_EXT_CLK_BYPASSS are not supported.
+ * @pll_stable_time: specifies the PLL Timer for stability of the ganerated
+ *	clock(System clock cycle base)
+ *	if the timer value goes to 0x00000000, the clock stable bit of status
+ *	and interrupt register is set.
+ * @esc_clk: specifies escape clock frequency for getting the escape clock
+ *	prescaler value.
+ * @stop_holding_cnt: specifies the interval value between transmitting
+ *	read packet(or write "set_tear_on" command) and BTA request.
+ *	after transmitting read packet or write "set_tear_on" command,
+ *	BTA requests to D-PHY automatically. this counter value specifies
+ *	the interval between them.
+ * @bta_timeout: specifies the timer for BTA.
+ *	this register specifies time out from BTA request to change
+ *	the direction with respect to Tx escape clock.
+ * @rx_timeout: specifies the timer for LP Rx mode timeout.
+ *	this register specifies time out on how long RxValid deasserts,
+ *	after RxLpdt asserts with respect to Tx escape clock.
+ *	- RxValid specifies Rx data valid indicator.
+ *	- RxLpdt specifies an indicator that D-PHY is under RxLpdt mode.
+ *	- RxValid and RxLpdt specifies signal from D-PHY.
+ */
+struct mipi_dsim_config {
+	unsigned char			auto_flush;
+	unsigned char			eot_disable;
+
+	unsigned char			auto_vertical_cnt;
+	unsigned char			hse;
+	unsigned char			hfp;
+	unsigned char			hbp;
+	unsigned char			hsa;
+	unsigned char			cmd_allow;
+
+	enum mipi_dsim_interface_type	e_interface;
+	enum mipi_dsim_virtual_ch_no	e_virtual_ch;
+	enum mipi_dsim_pixel_format	e_pixel_format;
+	enum mipi_dsim_burst_mode_type	e_burst_mode;
+	enum mipi_dsim_no_of_data_lane	e_no_data_lane;
+	enum mipi_dsim_byte_clk_src	e_byte_clk;
+
+	/*
+	 * ===========================================
+	 * |    P    |    M    |    S    |    MHz    |
+	 * -------------------------------------------
+	 * |    3    |   100   |    3    |    100    |
+	 * |    3    |   100   |    2    |    200    |
+	 * |    3    |    63   |    1    |    252    |
+	 * |    4    |   100   |    1    |    300    |
+	 * |    4    |   110   |    1    |    330    |
+	 * |   12    |   350   |    1    |    350    |
+	 * |    3    |   100   |    1    |    400    |
+	 * |    4    |   150   |    1    |    450    |
+	 * |    6    |   118   |    1    |    472    |
+	 * |	3    |   120   |    1    |    480    |
+	 * |   12    |   250   |    0    |    500    |
+	 * |    4    |   100   |    0    |    600    |
+	 * |    3    |    81   |    0    |    648    |
+	 * |    3    |    88   |    0    |    704    |
+	 * |    3    |    90   |    0    |    720    |
+	 * |    3    |   100   |    0    |    800    |
+	 * |   12    |   425   |    0    |    850    |
+	 * |    4    |   150   |    0    |    900    |
+	 * |   12    |   475   |    0    |    950    |
+	 * |    6    |   250   |    0    |   1000    |
+	 * -------------------------------------------
+	 */
+
+	/*
+	 * pms could be calculated as the following.
+	 * M * 24 / P * 2 ^ S = MHz
+	 */
+	unsigned char			p;
+	unsigned short			m;
+	unsigned char			s;
+
+	unsigned int			pll_stable_time;
+	unsigned long			esc_clk;
+
+	unsigned short			stop_holding_cnt;
+	unsigned char			bta_timeout;
+	unsigned short			rx_timeout;
+};
+
+/*
+ * struct mipi_dsim_device - global interface for mipi-dsi driver.
+ *
+ * @dev: driver model representation of the device.
+ * @id: unique device id.
+ * @clock: pointer to MIPI-DSI clock of clock framework.
+ * @irq: interrupt number to MIPI-DSI controller.
+ * @reg_base: base address to memory mapped SRF of MIPI-DSI controller.
+ *	(virtual address)
+ * @lock: the mutex protecting this data structure.
+ * @dsim_info: infomation for configuring mipi-dsi controller.
+ * @master_ops: callbacks to mipi-dsi operations.
+ * @dsim_lcd_dev: pointer to activated ddi device.
+ *	(it would be registered by mipi-dsi driver.)
+ * @dsim_lcd_drv: pointer to activated_ddi driver.
+ *	(it would be registered by mipi-dsi driver.)
+ * @lcd_info: pointer to mipi_lcd_info structure.
+ * @state: specifies status of MIPI-DSI controller.
+ *	the status could be RESET, INIT, STOP, HSCLKEN and ULPS.
+ * @data_lane: specifiec enabled data lane number.
+ *	this variable would be set by driver according to e_no_data_lane
+ *	automatically.
+ * @e_clk_src: select byte clock source.
+ * @pd: pointer to MIPI-DSI driver platform data.
+ */
+struct mipi_dsim_device {
+	struct device			*dev;
+	int				id;
+	struct resource			*res;
+	struct clk			*clock;
+	unsigned int			irq;
+	void __iomem			*reg_base;
+	struct mutex			lock;
+
+	struct mipi_dsim_config		*dsim_config;
+	struct mipi_dsim_master_ops	*master_ops;
+	struct mipi_dsim_lcd_device	*dsim_lcd_dev;
+	struct mipi_dsim_lcd_driver	*dsim_lcd_drv;
+
+	unsigned int			state;
+	unsigned int			data_lane;
+	unsigned int			e_clk_src;
+	bool				suspended;
+
+	struct mipi_dsim_platform_data	*pd;
+};
+
+/*
+ * struct mipi_dsim_platform_data - interface to platform data
+ *	for mipi-dsi driver.
+ *
+ * @lcd_panel_name: specifies lcd panel name registered to mipi-dsi driver.
+ *	lcd panel driver searched would be actived.
+ * @dsim_config: pointer of structure for configuring mipi-dsi controller.
+ * @enabled: indicate whether mipi controller got enabled or not.
+ * @lcd_panel_info: pointer for lcd panel specific structure.
+ *	this structure specifies width, height, timing and polarity and so on.
+ * @phy_enable: pointer to a callback controlling D-PHY enable/reset
+ */
+struct mipi_dsim_platform_data {
+	char				lcd_panel_name[PANEL_NAME_SIZE];
+
+	struct mipi_dsim_config		*dsim_config;
+	unsigned int			enabled;
+	void				*lcd_panel_info;
+
+	int (*phy_enable)(struct platform_device *pdev, bool on);
+};
+
+/*
+ * struct mipi_dsim_master_ops - callbacks to mipi-dsi operations.
+ *
+ * @cmd_write: transfer command to lcd panel at LP mode.
+ * @cmd_read: read command from rx register.
+ * @get_dsim_frame_done: get the status that all screen data have been
+ *	transferred to mipi-dsi.
+ * @clear_dsim_frame_done: clear frame done status.
+ * @get_fb_frame_done: get frame done status of display controller.
+ * @trigger: trigger display controller.
+ *	- this one would be used only in case of CPU mode.
+ *  @set_early_blank_mode: set framebuffer blank mode.
+ *	- this callback should be called prior to fb_blank() by a client driver
+ *	only if needing.
+ *  @set_blank_mode: set framebuffer blank mode.
+ *	- this callback should be called after fb_blank() by a client driver
+ *	only if needing.
+ */
+
+struct mipi_dsim_master_ops {
+	int (*cmd_write)(struct mipi_dsim_device *dsim, unsigned int data_id,
+		const unsigned char *data0, unsigned int data1);
+	int (*cmd_read)(struct mipi_dsim_device *dsim, unsigned int data_id,
+		unsigned int data0, unsigned int req_size, u8 *rx_buf);
+	int (*get_dsim_frame_done)(struct mipi_dsim_device *dsim);
+	int (*clear_dsim_frame_done)(struct mipi_dsim_device *dsim);
+
+	int (*get_fb_frame_done)(struct fb_info *info);
+	void (*trigger)(struct fb_info *info);
+	int (*set_early_blank_mode)(struct mipi_dsim_device *dsim, int power);
+	int (*set_blank_mode)(struct mipi_dsim_device *dsim, int power);
+};
+
+/*
+ * device structure for mipi-dsi based lcd panel.
+ *
+ * @name: name of the device to use with this device, or an
+ *	alias for that name.
+ * @dev: driver model representation of the device.
+ * @id: id of device to be registered.
+ * @bus_id: bus id for identifing connected bus
+ *	and this bus id should be same as id of mipi_dsim_device.
+ * @irq: irq number for signaling when framebuffer transfer of
+ *	lcd panel module is completed.
+ *	this irq would be used only for MIPI-DSI based CPU mode lcd panel.
+ * @master: pointer to mipi-dsi master device object.
+ * @platform_data: lcd panel specific platform data.
+ */
+struct mipi_dsim_lcd_device {
+	char			*name;
+	struct device		dev;
+	int			id;
+	int			bus_id;
+	int			irq;
+
+	struct mipi_dsim_device *master;
+	void			*platform_data;
+};
+
+/*
+ * driver structure for mipi-dsi based lcd panel.
+ *
+ * this structure should be registered by lcd panel driver.
+ * mipi-dsi driver seeks lcd panel registered through name field
+ * and calls these callback functions in appropriate time.
+ *
+ * @name: name of the driver to use with this device, or an
+ *	alias for that name.
+ * @id: id of driver to be registered.
+ *	this id would be used for finding device object registered.
+ */
+struct mipi_dsim_lcd_driver {
+	char			*name;
+	int			id;
+
+	void	(*power_on)(struct mipi_dsim_lcd_device *dsim_dev, int enable);
+	void	(*set_sequence)(struct mipi_dsim_lcd_device *dsim_dev);
+	int	(*probe)(struct mipi_dsim_lcd_device *dsim_dev);
+	int	(*remove)(struct mipi_dsim_lcd_device *dsim_dev);
+	void	(*shutdown)(struct mipi_dsim_lcd_device *dsim_dev);
+	int	(*suspend)(struct mipi_dsim_lcd_device *dsim_dev);
+	int	(*resume)(struct mipi_dsim_lcd_device *dsim_dev);
+};
+
+/*
+ * register mipi_dsim_lcd_device to mipi-dsi master.
+ */
+int exynos_mipi_dsi_register_lcd_device(struct mipi_dsim_lcd_device
+						*lcd_dev);
+/**
+ * register mipi_dsim_lcd_driver object defined by lcd panel driver
+ * to mipi-dsi driver.
+ */
+int exynos_mipi_dsi_register_lcd_driver(struct mipi_dsim_lcd_driver
+						*lcd_drv);
+#endif /* _EXYNOS_MIPI_DSIM_H */