wil6210: Detect FW error
In the firmware, added is ability to report internal errors using IRQ.
Catch this IRQ and notify user space via netlink
User space get notified like (udevadm monitor --kernel --property):
KERNEL[12660.320520] change /devices/pci0000:00/0000:00:1c.1/0000:02:00.0/0000:03:01.0/0000:05:00.0/net/wlan12 (net)
ACTION=change
DEVPATH=/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/0000:03:01.0/0000:05:00.0/net/wlan12
DEVTYPE=wlan
EVENT=FW_ERROR
IFINDEX=6
INTERFACE=wlan12
SEQNUM=2489
SOURCE=wil6210
SUBSYSTEM=net
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c
index 38049da..d2109d5 100644
--- a/drivers/net/wireless/ath/wil6210/interrupt.c
+++ b/drivers/net/wireless/ath/wil6210/interrupt.c
@@ -38,7 +38,9 @@
#define WIL6210_IMC_RX BIT_DMA_EP_RX_ICR_RX_DONE
#define WIL6210_IMC_TX (BIT_DMA_EP_TX_ICR_TX_DONE | \
BIT_DMA_EP_TX_ICR_TX_DONE_N(0))
-#define WIL6210_IMC_MISC (ISR_MISC_FW_READY | ISR_MISC_MBOX_EVT)
+#define WIL6210_IMC_MISC (ISR_MISC_FW_READY | \
+ ISR_MISC_MBOX_EVT | \
+ ISR_MISC_FW_ERROR)
#define WIL6210_IRQ_PSEUDO_MASK (u32)(~(BIT_DMA_PSEUDO_CAUSE_RX | \
BIT_DMA_PSEUDO_CAUSE_TX | \
@@ -228,6 +230,17 @@
return IRQ_HANDLED;
}
+static void wil_notify_fw_error(struct wil6210_priv *wil)
+{
+ struct device *dev = &wil_to_ndev(wil)->dev;
+ char *envp[3] = {
+ [0] = "SOURCE=wil6210",
+ [1] = "EVENT=FW_ERROR",
+ [2] = NULL,
+ };
+ kobject_uevent_env(&dev->kobj, KOBJ_CHANGE, envp);
+}
+
static irqreturn_t wil6210_irq_misc(int irq, void *cookie)
{
struct wil6210_priv *wil = cookie;
@@ -244,6 +257,13 @@
wil6210_mask_irq_misc(wil);
+ if (isr & ISR_MISC_FW_ERROR) {
+ wil_dbg_IRQ(wil, "IRQ: Firmware error\n");
+ clear_bit(wil_status_fwready, &wil->status);
+ wil_notify_fw_error(wil);
+ isr &= ~ISR_MISC_FW_ERROR;
+ }
+
if (isr & ISR_MISC_FW_READY) {
wil_dbg_IRQ(wil, "IRQ: FW ready\n");
/**