tulip: Convert uses of KERN_DEBUG
Convert logging messages to more current styles.
Added -DDEBUG to Makefile to maintain current message logging.
This could be converted to a specific CONFIG_TULIP_DEBUG option.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/tulip/timer.c b/drivers/net/tulip/timer.c
index 36c2725..2017faf 100644
--- a/drivers/net/tulip/timer.c
+++ b/drivers/net/tulip/timer.c
@@ -28,11 +28,11 @@
unsigned long flags;
if (tulip_debug > 2) {
- printk(KERN_DEBUG "%s: Media selection tick, %s, status %08x mode %08x SIA %08x %08x %08x %08x\n",
- dev->name, medianame[dev->if_port],
- ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR6),
- csr12, ioread32(ioaddr + CSR13),
- ioread32(ioaddr + CSR14), ioread32(ioaddr + CSR15));
+ netdev_dbg(dev, "Media selection tick, %s, status %08x mode %08x SIA %08x %08x %08x %08x\n",
+ medianame[dev->if_port],
+ ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR6),
+ csr12, ioread32(ioaddr + CSR13),
+ ioread32(ioaddr + CSR14), ioread32(ioaddr + CSR15));
}
switch (tp->chip_id) {
case DC21140:
@@ -48,9 +48,9 @@
Assume this a generic MII or SYM transceiver. */
next_tick = 60*HZ;
if (tulip_debug > 2)
- printk(KERN_DEBUG "%s: network media monitor CSR6 %08x CSR12 0x%02x\n",
- dev->name,
- ioread32(ioaddr + CSR6), csr12 & 0xff);
+ netdev_dbg(dev, "network media monitor CSR6 %08x CSR12 0x%02x\n",
+ ioread32(ioaddr + CSR6),
+ csr12 & 0xff);
break;
}
mleaf = &tp->mtable->mleaf[tp->cur_index];
@@ -62,8 +62,8 @@
s8 bitnum = p[offset];
if (p[offset+1] & 0x80) {
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: Transceiver monitor tick CSR12=%#02x, no media sense\n",
- dev->name, csr12);
+ netdev_dbg(dev, "Transceiver monitor tick CSR12=%#02x, no media sense\n",
+ csr12);
if (mleaf->type == 4) {
if (mleaf->media == 3 && (csr12 & 0x02))
goto select_next_media;
@@ -71,17 +71,16 @@
break;
}
if (tulip_debug > 2)
- printk(KERN_DEBUG "%s: Transceiver monitor tick: CSR12=%#02x bit %d is %d, expecting %d\n",
- dev->name, csr12, (bitnum >> 1) & 7,
- (csr12 & (1 << ((bitnum >> 1) & 7))) != 0,
- (bitnum >= 0));
+ netdev_dbg(dev, "Transceiver monitor tick: CSR12=%#02x bit %d is %d, expecting %d\n",
+ csr12, (bitnum >> 1) & 7,
+ (csr12 & (1 << ((bitnum >> 1) & 7))) != 0,
+ (bitnum >= 0));
/* Check that the specified bit has the proper value. */
if ((bitnum < 0) !=
((csr12 & (1 << ((bitnum >> 1) & 7))) != 0)) {
if (tulip_debug > 2)
- printk(KERN_DEBUG "%s: Link beat detected for %s\n",
- dev->name,
- medianame[mleaf->media & MEDIA_MASK]);
+ netdev_dbg(dev, "Link beat detected for %s\n",
+ medianame[mleaf->media & MEDIA_MASK]);
if ((p[2] & 0x61) == 0x01) /* Bogus Znyx board. */
goto actually_mii;
netif_carrier_on(dev);
@@ -99,10 +98,9 @@
if (tulip_media_cap[dev->if_port] & MediaIsFD)
goto select_next_media; /* Skip FD entries. */
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: No link beat on media %s, trying transceiver type %s\n",
- dev->name,
- medianame[mleaf->media & MEDIA_MASK],
- medianame[tp->mtable->mleaf[tp->cur_index].media]);
+ netdev_dbg(dev, "No link beat on media %s, trying transceiver type %s\n",
+ medianame[mleaf->media & MEDIA_MASK],
+ medianame[tp->mtable->mleaf[tp->cur_index].media]);
tulip_select_media(dev, 0);
/* Restart the transmit process. */
tulip_restart_rxtx(tp);
@@ -166,10 +164,9 @@
int next_tick = 60*HZ;
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: Comet link status %04x partner capability %04x\n",
- dev->name,
- tulip_mdio_read(dev, tp->phys[0], 1),
- tulip_mdio_read(dev, tp->phys[0], 5));
+ netdev_dbg(dev, "Comet link status %04x partner capability %04x\n",
+ tulip_mdio_read(dev, tp->phys[0], 1),
+ tulip_mdio_read(dev, tp->phys[0], 5));
/* mod_timer synchronizes us with potential add_timer calls
* from interrupts.
*/