smc911x irq sense request and MPR2 board support
Hi,
this are the changes to the smc911x driver, which were necessary
to get it running on the Magic Panel R2 (smsc9115).
It is a SH3-DSP based board. The other patches are available on
the linuxsh-dev mailinglist.
http://marc.info/?l=linuxsh-dev&r=1&b=200708&w=2
It was necessary to set the irq sense to low level.
Therefor the SMC_IRQ_SENSE define was added.
How are the chances for inclusion in 2.6.24?
Signed-off by: Markus Brunner <super.firetwister@gmail.com>
Signed-off by: Mark Jonas <toertel@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
index 962a710..16a0edc 100644
--- a/drivers/net/smc911x.h
+++ b/drivers/net/smc911x.h
@@ -36,6 +36,12 @@
#define SMC_USE_PXA_DMA 1
#define SMC_USE_16BIT 0
#define SMC_USE_32BIT 1
+ #define SMC_IRQ_SENSE IRQF_TRIGGER_FALLING
+#elif CONFIG_SH_MAGIC_PANEL_R2
+ #define SMC_USE_SH_DMA 0
+ #define SMC_USE_16BIT 0
+ #define SMC_USE_32BIT 1
+ #define SMC_IRQ_SENSE IRQF_TRIGGER_LOW
#endif