[ARM] 3865/1: AT91RM9200 header updates
This is more preparation for adding support for the new Atmel AT91SAM9
processors.
Changes include:
- Replace AT91_BASE_* with AT91RM9200_BASE_*
- Replace AT91_ID_* with AT91RM9200_ID_*
- ROM, SRAM and UHP address definitions moved to at91rm9200.h.
- The raw AT91_P[ABCD]_* definitions are now depreciated in favour of
the GPIO API.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-at91rm9200/at91rm9200.c b/arch/arm/mach-at91rm9200/at91rm9200.c
index 0985b1c..e21cb84 100644
--- a/arch/arm/mach-at91rm9200/at91rm9200.c
+++ b/arch/arm/mach-at91rm9200/at91rm9200.c
@@ -26,78 +26,78 @@
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_SPI,
- .pfn = __phys_to_pfn(AT91_BASE_SPI),
+ .pfn = __phys_to_pfn(AT91RM9200_BASE_SPI),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_SSC2,
- .pfn = __phys_to_pfn(AT91_BASE_SSC2),
+ .pfn = __phys_to_pfn(AT91RM9200_BASE_SSC2),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_SSC1,
- .pfn = __phys_to_pfn(AT91_BASE_SSC1),
+ .pfn = __phys_to_pfn(AT91RM9200_BASE_SSC1),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_SSC0,
- .pfn = __phys_to_pfn(AT91_BASE_SSC0),
+ .pfn = __phys_to_pfn(AT91RM9200_BASE_SSC0),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_US3,
- .pfn = __phys_to_pfn(AT91_BASE_US3),
+ .pfn = __phys_to_pfn(AT91RM9200_BASE_US3),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_US2,
- .pfn = __phys_to_pfn(AT91_BASE_US2),
+ .pfn = __phys_to_pfn(AT91RM9200_BASE_US2),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_US1,
- .pfn = __phys_to_pfn(AT91_BASE_US1),
+ .pfn = __phys_to_pfn(AT91RM9200_BASE_US1),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_US0,
- .pfn = __phys_to_pfn(AT91_BASE_US0),
+ .pfn = __phys_to_pfn(AT91RM9200_BASE_US0),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_EMAC,
- .pfn = __phys_to_pfn(AT91_BASE_EMAC),
+ .pfn = __phys_to_pfn(AT91RM9200_BASE_EMAC),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_TWI,
- .pfn = __phys_to_pfn(AT91_BASE_TWI),
+ .pfn = __phys_to_pfn(AT91RM9200_BASE_TWI),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_MCI,
- .pfn = __phys_to_pfn(AT91_BASE_MCI),
+ .pfn = __phys_to_pfn(AT91RM9200_BASE_MCI),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_UDP,
- .pfn = __phys_to_pfn(AT91_BASE_UDP),
+ .pfn = __phys_to_pfn(AT91RM9200_BASE_UDP),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_TCB1,
- .pfn = __phys_to_pfn(AT91_BASE_TCB1),
+ .pfn = __phys_to_pfn(AT91RM9200_BASE_TCB1),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_TCB0,
- .pfn = __phys_to_pfn(AT91_BASE_TCB0),
+ .pfn = __phys_to_pfn(AT91RM9200_BASE_TCB0),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_SRAM_VIRT_BASE,
- .pfn = __phys_to_pfn(AT91_SRAM_BASE),
- .length = AT91_SRAM_SIZE,
+ .pfn = __phys_to_pfn(AT91RM9200_SRAM_BASE),
+ .length = AT91RM9200_SRAM_SIZE,
.type = MT_DEVICE,
},
};
diff --git a/arch/arm/mach-at91rm9200/clock.c b/arch/arm/mach-at91rm9200/clock.c
index edc2cc8..5b78922 100644
--- a/arch/arm/mach-at91rm9200/clock.c
+++ b/arch/arm/mach-at91rm9200/clock.c
@@ -190,85 +190,85 @@
static struct clk udc_clk = {
.name = "udc_clk",
.parent = &mck,
- .pmc_mask = 1 << AT91_ID_UDP,
+ .pmc_mask = 1 << AT91RM9200_ID_UDP,
.mode = pmc_periph_mode,
};
static struct clk ohci_clk = {
.name = "ohci_clk",
.parent = &mck,
- .pmc_mask = 1 << AT91_ID_UHP,
+ .pmc_mask = 1 << AT91RM9200_ID_UHP,
.mode = pmc_periph_mode,
};
static struct clk ether_clk = {
.name = "ether_clk",
.parent = &mck,
- .pmc_mask = 1 << AT91_ID_EMAC,
+ .pmc_mask = 1 << AT91RM9200_ID_EMAC,
.mode = pmc_periph_mode,
};
static struct clk mmc_clk = {
.name = "mci_clk",
.parent = &mck,
- .pmc_mask = 1 << AT91_ID_MCI,
+ .pmc_mask = 1 << AT91RM9200_ID_MCI,
.mode = pmc_periph_mode,
};
static struct clk twi_clk = {
.name = "twi_clk",
.parent = &mck,
- .pmc_mask = 1 << AT91_ID_TWI,
+ .pmc_mask = 1 << AT91RM9200_ID_TWI,
.mode = pmc_periph_mode,
};
static struct clk usart0_clk = {
.name = "usart0_clk",
.parent = &mck,
- .pmc_mask = 1 << AT91_ID_US0,
+ .pmc_mask = 1 << AT91RM9200_ID_US0,
.mode = pmc_periph_mode,
};
static struct clk usart1_clk = {
.name = "usart1_clk",
.parent = &mck,
- .pmc_mask = 1 << AT91_ID_US1,
+ .pmc_mask = 1 << AT91RM9200_ID_US1,
.mode = pmc_periph_mode,
};
static struct clk usart2_clk = {
.name = "usart2_clk",
.parent = &mck,
- .pmc_mask = 1 << AT91_ID_US2,
+ .pmc_mask = 1 << AT91RM9200_ID_US2,
.mode = pmc_periph_mode,
};
static struct clk usart3_clk = {
.name = "usart3_clk",
.parent = &mck,
- .pmc_mask = 1 << AT91_ID_US3,
+ .pmc_mask = 1 << AT91RM9200_ID_US3,
.mode = pmc_periph_mode,
};
static struct clk spi_clk = {
.name = "spi0_clk",
.parent = &mck,
- .pmc_mask = 1 << AT91_ID_SPI,
+ .pmc_mask = 1 << AT91RM9200_ID_SPI,
.mode = pmc_periph_mode,
};
static struct clk pioA_clk = {
.name = "pioA_clk",
.parent = &mck,
- .pmc_mask = 1 << AT91_ID_PIOA,
+ .pmc_mask = 1 << AT91RM9200_ID_PIOA,
.mode = pmc_periph_mode,
};
static struct clk pioB_clk = {
.name = "pioB_clk",
.parent = &mck,
- .pmc_mask = 1 << AT91_ID_PIOB,
+ .pmc_mask = 1 << AT91RM9200_ID_PIOB,
.mode = pmc_periph_mode,
};
static struct clk pioC_clk = {
.name = "pioC_clk",
.parent = &mck,
- .pmc_mask = 1 << AT91_ID_PIOC,
+ .pmc_mask = 1 << AT91RM9200_ID_PIOC,
.mode = pmc_periph_mode,
};
static struct clk pioD_clk = {
.name = "pioD_clk",
.parent = &mck,
- .pmc_mask = 1 << AT91_ID_PIOD,
+ .pmc_mask = 1 << AT91RM9200_ID_PIOD,
.mode = pmc_periph_mode,
};
diff --git a/arch/arm/mach-at91rm9200/devices.c b/arch/arm/mach-at91rm9200/devices.c
index 4352acb..db7c684 100644
--- a/arch/arm/mach-at91rm9200/devices.c
+++ b/arch/arm/mach-at91rm9200/devices.c
@@ -35,13 +35,13 @@
static struct resource at91_usbh_resources[] = {
[0] = {
- .start = AT91_UHP_BASE,
- .end = AT91_UHP_BASE + SZ_1M - 1,
+ .start = AT91RM9200_UHP_BASE,
+ .end = AT91RM9200_UHP_BASE + SZ_1M - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91_ID_UHP,
- .end = AT91_ID_UHP,
+ .start = AT91RM9200_ID_UHP,
+ .end = AT91RM9200_ID_UHP,
.flags = IORESOURCE_IRQ,
},
};
@@ -80,13 +80,13 @@
static struct resource at91_udc_resources[] = {
[0] = {
- .start = AT91_BASE_UDP,
- .end = AT91_BASE_UDP + SZ_16K - 1,
+ .start = AT91RM9200_BASE_UDP,
+ .end = AT91RM9200_BASE_UDP + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91_ID_UDP,
- .end = AT91_ID_UDP,
+ .start = AT91RM9200_ID_UDP,
+ .end = AT91RM9200_ID_UDP,
.flags = IORESOURCE_IRQ,
},
};
@@ -131,13 +131,13 @@
static struct resource at91_eth_resources[] = {
[0] = {
- .start = AT91_BASE_EMAC,
- .end = AT91_BASE_EMAC + SZ_16K - 1,
+ .start = AT91RM9200_BASE_EMAC,
+ .end = AT91RM9200_BASE_EMAC + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91_ID_EMAC,
- .end = AT91_ID_EMAC,
+ .start = AT91RM9200_ID_EMAC,
+ .end = AT91RM9200_ID_EMAC,
.flags = IORESOURCE_IRQ,
},
};
@@ -263,13 +263,13 @@
static struct resource at91_mmc_resources[] = {
[0] = {
- .start = AT91_BASE_MCI,
- .end = AT91_BASE_MCI + SZ_16K - 1,
+ .start = AT91RM9200_BASE_MCI,
+ .end = AT91RM9200_BASE_MCI + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91_ID_MCI,
- .end = AT91_ID_MCI,
+ .start = AT91RM9200_ID_MCI,
+ .end = AT91RM9200_ID_MCI,
.flags = IORESOURCE_IRQ,
},
};
@@ -423,13 +423,13 @@
static struct resource at91_spi_resources[] = {
[0] = {
- .start = AT91_BASE_SPI,
- .end = AT91_BASE_SPI + SZ_16K - 1,
+ .start = AT91RM9200_BASE_SPI,
+ .end = AT91RM9200_BASE_SPI + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91_ID_SPI,
- .end = AT91_ID_SPI,
+ .start = AT91RM9200_ID_SPI,
+ .end = AT91RM9200_ID_SPI,
.flags = IORESOURCE_IRQ,
},
};
@@ -582,13 +582,13 @@
static struct resource uart0_resources[] = {
[0] = {
- .start = AT91_BASE_US0,
- .end = AT91_BASE_US0 + SZ_16K - 1,
+ .start = AT91RM9200_BASE_US0,
+ .end = AT91RM9200_BASE_US0 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91_ID_US0,
- .end = AT91_ID_US0,
+ .start = AT91RM9200_ID_US0,
+ .end = AT91RM9200_ID_US0,
.flags = IORESOURCE_IRQ,
},
};
@@ -624,13 +624,13 @@
static struct resource uart1_resources[] = {
[0] = {
- .start = AT91_BASE_US1,
- .end = AT91_BASE_US1 + SZ_16K - 1,
+ .start = AT91RM9200_BASE_US1,
+ .end = AT91RM9200_BASE_US1 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91_ID_US1,
- .end = AT91_ID_US1,
+ .start = AT91RM9200_ID_US1,
+ .end = AT91RM9200_ID_US1,
.flags = IORESOURCE_IRQ,
},
};
@@ -665,13 +665,13 @@
static struct resource uart2_resources[] = {
[0] = {
- .start = AT91_BASE_US2,
- .end = AT91_BASE_US2 + SZ_16K - 1,
+ .start = AT91RM9200_BASE_US2,
+ .end = AT91RM9200_BASE_US2 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91_ID_US2,
- .end = AT91_ID_US2,
+ .start = AT91RM9200_ID_US2,
+ .end = AT91RM9200_ID_US2,
.flags = IORESOURCE_IRQ,
},
};
@@ -700,13 +700,13 @@
static struct resource uart3_resources[] = {
[0] = {
- .start = AT91_BASE_US3,
- .end = AT91_BASE_US3 + SZ_16K - 1,
+ .start = AT91RM9200_BASE_US3,
+ .end = AT91RM9200_BASE_US3 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91_ID_US3,
- .end = AT91_ID_US3,
+ .start = AT91RM9200_ID_US3,
+ .end = AT91RM9200_ID_US3,
.flags = IORESOURCE_IRQ,
},
};
diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c
index cec199f..8476cb8 100644
--- a/arch/arm/mach-at91rm9200/gpio.c
+++ b/arch/arm/mach-at91rm9200/gpio.c
@@ -261,10 +261,10 @@
at91_sys_write(pio_controller_offset[i] + PIO_IER, wakeups[i]);
if (!wakeups[i]) {
- disable_irq_wake(AT91_ID_PIOA + i);
- at91_sys_write(AT91_PMC_PCDR, 1 << (AT91_ID_PIOA + i));
+ disable_irq_wake(AT91RM9200_ID_PIOA + i);
+ at91_sys_write(AT91_PMC_PCDR, 1 << (AT91RM9200_ID_PIOA + i));
} else {
- enable_irq_wake(AT91_ID_PIOA + i);
+ enable_irq_wake(AT91RM9200_ID_PIOA + i);
#ifdef CONFIG_PM_DEBUG
printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", "ABCD"[i], wakeups[i]);
#endif
@@ -282,10 +282,10 @@
}
at91_sys_write(AT91_PMC_PCER,
- (1 << AT91_ID_PIOA)
- | (1 << AT91_ID_PIOB)
- | (1 << AT91_ID_PIOC)
- | (1 << AT91_ID_PIOD));
+ (1 << AT91RM9200_ID_PIOA)
+ | (1 << AT91RM9200_ID_PIOB)
+ | (1 << AT91RM9200_ID_PIOC)
+ | (1 << AT91RM9200_ID_PIOD));
}
#else
@@ -384,7 +384,7 @@
if (banks > 4)
banks = 4;
- for (pioc = 0, pin = PIN_BASE, id = AT91_ID_PIOA;
+ for (pioc = 0, pin = PIN_BASE, id = AT91RM9200_ID_PIOA;
pioc < banks;
pioc++, id++) {
void __iomem *controller;
diff --git a/arch/arm/mach-at91rm9200/irq.c b/arch/arm/mach-at91rm9200/irq.c
index c3a5e77..8cd60a9 100644
--- a/arch/arm/mach-at91rm9200/irq.c
+++ b/arch/arm/mach-at91rm9200/irq.c
@@ -61,12 +61,12 @@
srctype = AT91_AIC_SRCTYPE_RISING;
break;
case IRQT_LOW:
- if ((irq > AT91_ID_FIQ) && (irq < AT91_ID_IRQ0)) /* only supported on external interrupts */
+ if ((irq > AT91_ID_FIQ) && (irq < AT91RM9200_ID_IRQ0)) /* only supported on external interrupts */
return -EINVAL;
srctype = AT91_AIC_SRCTYPE_LOW;
break;
case IRQT_FALLING:
- if ((irq > AT91_ID_FIQ) && (irq < AT91_ID_IRQ0)) /* only supported on external interrupts */
+ if ((irq > AT91_ID_FIQ) && (irq < AT91RM9200_ID_IRQ0)) /* only supported on external interrupts */
return -EINVAL;
srctype = AT91_AIC_SRCTYPE_FALLING;
break;
diff --git a/arch/arm/mach-at91rm9200/pm.c b/arch/arm/mach-at91rm9200/pm.c
index 47e5480..32c95d8 100644
--- a/arch/arm/mach-at91rm9200/pm.c
+++ b/arch/arm/mach-at91rm9200/pm.c
@@ -123,13 +123,13 @@
(at91_sys_read(AT91_PMC_PCSR)
| (1 << AT91_ID_FIQ)
| (1 << AT91_ID_SYS)
- | (1 << AT91_ID_IRQ0)
- | (1 << AT91_ID_IRQ1)
- | (1 << AT91_ID_IRQ2)
- | (1 << AT91_ID_IRQ3)
- | (1 << AT91_ID_IRQ4)
- | (1 << AT91_ID_IRQ5)
- | (1 << AT91_ID_IRQ6))
+ | (1 << AT91RM9200_ID_IRQ0)
+ | (1 << AT91RM9200_ID_IRQ1)
+ | (1 << AT91RM9200_ID_IRQ2)
+ | (1 << AT91RM9200_ID_IRQ3)
+ | (1 << AT91RM9200_ID_IRQ4)
+ | (1 << AT91RM9200_ID_IRQ5)
+ | (1 << AT91RM9200_ID_IRQ6))
& at91_sys_read(AT91_AIC_IMR),
state);
diff --git a/drivers/mmc/at91_mci.c b/drivers/mmc/at91_mci.c
index 6b7638b..4b3d4d6 100644
--- a/drivers/mmc/at91_mci.c
+++ b/drivers/mmc/at91_mci.c
@@ -850,7 +850,7 @@
/*
* Allocate the MCI interrupt
*/
- ret = request_irq(AT91_ID_MCI, at91_mci_irq, IRQF_SHARED, DRIVER_NAME, host);
+ ret = request_irq(AT91RM9200_ID_MCI, at91_mci_irq, IRQF_SHARED, DRIVER_NAME, host);
if (ret) {
printk(KERN_ERR "Failed to request MCI interrupt\n");
clk_disable(mci_clk);
@@ -906,7 +906,7 @@
mmc_remove_host(mmc);
at91_mci_disable();
- free_irq(AT91_ID_MCI, host);
+ free_irq(AT91RM9200_ID_MCI, host);
mmc_free_host(mmc);
clk_disable(mci_clk); /* Disable the peripheral clock */
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index 95b28aa..3ecf2cc5 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
@@ -947,7 +947,7 @@
return -ENOMEM;
dev->base_addr = AT91_VA_BASE_EMAC;
- dev->irq = AT91_ID_EMAC;
+ dev->irq = AT91RM9200_ID_EMAC;
SET_MODULE_OWNER(dev);
/* Install the interrupt handler */
diff --git a/drivers/serial/at91_serial.c b/drivers/serial/at91_serial.c
index 54c6b2a..bf4bf10 100644
--- a/drivers/serial/at91_serial.c
+++ b/drivers/serial/at91_serial.c
@@ -139,7 +139,7 @@
* AT91RM9200 Errata #39: RTS0 is not internally connected to PA21.
* We need to drive the pin manually.
*/
- if (port->mapbase == AT91_BASE_US0) {
+ if (port->mapbase == AT91RM9200_BASE_US0) {
if (mctrl & TIOCM_RTS)
at91_set_gpio_value(AT91_PIN_PA21, 0);
else
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index cfebca0..043744f 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1658,7 +1658,7 @@
return -ENODEV;
}
- if (!request_mem_region(AT91_BASE_UDP, SZ_16K, driver_name)) {
+ if (!request_mem_region(AT91RM9200_BASE_UDP, SZ_16K, driver_name)) {
DBG("someone's using UDC memory\n");
return -EBUSY;
}
@@ -1720,7 +1720,7 @@
fail1:
device_unregister(&udc->gadget.dev);
fail0:
- release_mem_region(AT91_BASE_UDP, SZ_16K);
+ release_mem_region(AT91RM9200_BASE_UDP, SZ_16K);
DBG("%s probe failed, %d\n", driver_name, retval);
return retval;
}
@@ -1742,7 +1742,7 @@
free_irq(udc->board.vbus_pin, udc);
free_irq(udc->udp_irq, udc);
device_unregister(&udc->gadget.dev);
- release_mem_region(AT91_BASE_UDP, SZ_16K);
+ release_mem_region(AT91RM9200_BASE_UDP, SZ_16K);
clk_put(udc->iclk);
clk_put(udc->fclk);
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200.h b/include/asm-arm/arch-at91rm9200/at91rm9200.h
index 58f4093..a5a86b1 100644
--- a/include/asm-arm/arch-at91rm9200/at91rm9200.h
+++ b/include/asm-arm/arch-at91rm9200/at91rm9200.h
@@ -19,67 +19,80 @@
/*
* Peripheral identifiers/interrupts.
*/
-#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS 1 /* System Peripheral */
-#define AT91_ID_PIOA 2 /* Parallel IO Controller A */
-#define AT91_ID_PIOB 3 /* Parallel IO Controller B */
-#define AT91_ID_PIOC 4 /* Parallel IO Controller C */
-#define AT91_ID_PIOD 5 /* Parallel IO Controller D */
-#define AT91_ID_US0 6 /* USART 0 */
-#define AT91_ID_US1 7 /* USART 1 */
-#define AT91_ID_US2 8 /* USART 2 */
-#define AT91_ID_US3 9 /* USART 3 */
-#define AT91_ID_MCI 10 /* Multimedia Card Interface */
-#define AT91_ID_UDP 11 /* USB Device Port */
-#define AT91_ID_TWI 12 /* Two-Wire Interface */
-#define AT91_ID_SPI 13 /* Serial Peripheral Interface */
-#define AT91_ID_SSC0 14 /* Serial Synchronous Controller 0 */
-#define AT91_ID_SSC1 15 /* Serial Synchronous Controller 1 */
-#define AT91_ID_SSC2 16 /* Serial Synchronous Controller 2 */
-#define AT91_ID_TC0 17 /* Timer Counter 0 */
-#define AT91_ID_TC1 18 /* Timer Counter 1 */
-#define AT91_ID_TC2 19 /* Timer Counter 2 */
-#define AT91_ID_TC3 20 /* Timer Counter 3 */
-#define AT91_ID_TC4 21 /* Timer Counter 4 */
-#define AT91_ID_TC5 22 /* Timer Counter 5 */
-#define AT91_ID_UHP 23 /* USB Host port */
-#define AT91_ID_EMAC 24 /* Ethernet MAC */
-#define AT91_ID_IRQ0 25 /* Advanced Interrupt Controller (IRQ0) */
-#define AT91_ID_IRQ1 26 /* Advanced Interrupt Controller (IRQ1) */
-#define AT91_ID_IRQ2 27 /* Advanced Interrupt Controller (IRQ2) */
-#define AT91_ID_IRQ3 28 /* Advanced Interrupt Controller (IRQ3) */
-#define AT91_ID_IRQ4 29 /* Advanced Interrupt Controller (IRQ4) */
-#define AT91_ID_IRQ5 30 /* Advanced Interrupt Controller (IRQ5) */
-#define AT91_ID_IRQ6 31 /* Advanced Interrupt Controller (IRQ6) */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Peripheral */
+#define AT91RM9200_ID_PIOA 2 /* Parallel IO Controller A */
+#define AT91RM9200_ID_PIOB 3 /* Parallel IO Controller B */
+#define AT91RM9200_ID_PIOC 4 /* Parallel IO Controller C */
+#define AT91RM9200_ID_PIOD 5 /* Parallel IO Controller D */
+#define AT91RM9200_ID_US0 6 /* USART 0 */
+#define AT91RM9200_ID_US1 7 /* USART 1 */
+#define AT91RM9200_ID_US2 8 /* USART 2 */
+#define AT91RM9200_ID_US3 9 /* USART 3 */
+#define AT91RM9200_ID_MCI 10 /* Multimedia Card Interface */
+#define AT91RM9200_ID_UDP 11 /* USB Device Port */
+#define AT91RM9200_ID_TWI 12 /* Two-Wire Interface */
+#define AT91RM9200_ID_SPI 13 /* Serial Peripheral Interface */
+#define AT91RM9200_ID_SSC0 14 /* Serial Synchronous Controller 0 */
+#define AT91RM9200_ID_SSC1 15 /* Serial Synchronous Controller 1 */
+#define AT91RM9200_ID_SSC2 16 /* Serial Synchronous Controller 2 */
+#define AT91RM9200_ID_TC0 17 /* Timer Counter 0 */
+#define AT91RM9200_ID_TC1 18 /* Timer Counter 1 */
+#define AT91RM9200_ID_TC2 19 /* Timer Counter 2 */
+#define AT91RM9200_ID_TC3 20 /* Timer Counter 3 */
+#define AT91RM9200_ID_TC4 21 /* Timer Counter 4 */
+#define AT91RM9200_ID_TC5 22 /* Timer Counter 5 */
+#define AT91RM9200_ID_UHP 23 /* USB Host port */
+#define AT91RM9200_ID_EMAC 24 /* Ethernet MAC */
+#define AT91RM9200_ID_IRQ0 25 /* Advanced Interrupt Controller (IRQ0) */
+#define AT91RM9200_ID_IRQ1 26 /* Advanced Interrupt Controller (IRQ1) */
+#define AT91RM9200_ID_IRQ2 27 /* Advanced Interrupt Controller (IRQ2) */
+#define AT91RM9200_ID_IRQ3 28 /* Advanced Interrupt Controller (IRQ3) */
+#define AT91RM9200_ID_IRQ4 29 /* Advanced Interrupt Controller (IRQ4) */
+#define AT91RM9200_ID_IRQ5 30 /* Advanced Interrupt Controller (IRQ5) */
+#define AT91RM9200_ID_IRQ6 31 /* Advanced Interrupt Controller (IRQ6) */
/*
* Peripheral physical base addresses.
*/
-#define AT91_BASE_TCB0 0xfffa0000
-#define AT91_BASE_TC0 0xfffa0000
-#define AT91_BASE_TC1 0xfffa0040
-#define AT91_BASE_TC2 0xfffa0080
-#define AT91_BASE_TCB1 0xfffa4000
-#define AT91_BASE_TC3 0xfffa4000
-#define AT91_BASE_TC4 0xfffa4040
-#define AT91_BASE_TC5 0xfffa4080
-#define AT91_BASE_UDP 0xfffb0000
-#define AT91_BASE_MCI 0xfffb4000
-#define AT91_BASE_TWI 0xfffb8000
-#define AT91_BASE_EMAC 0xfffbc000
-#define AT91_BASE_US0 0xfffc0000
-#define AT91_BASE_US1 0xfffc4000
-#define AT91_BASE_US2 0xfffc8000
-#define AT91_BASE_US3 0xfffcc000
-#define AT91_BASE_SSC0 0xfffd0000
-#define AT91_BASE_SSC1 0xfffd4000
-#define AT91_BASE_SSC2 0xfffd8000
-#define AT91_BASE_SPI 0xfffe0000
+#define AT91RM9200_BASE_TCB0 0xfffa0000
+#define AT91RM9200_BASE_TC0 0xfffa0000
+#define AT91RM9200_BASE_TC1 0xfffa0040
+#define AT91RM9200_BASE_TC2 0xfffa0080
+#define AT91RM9200_BASE_TCB1 0xfffa4000
+#define AT91RM9200_BASE_TC3 0xfffa4000
+#define AT91RM9200_BASE_TC4 0xfffa4040
+#define AT91RM9200_BASE_TC5 0xfffa4080
+#define AT91RM9200_BASE_UDP 0xfffb0000
+#define AT91RM9200_BASE_MCI 0xfffb4000
+#define AT91RM9200_BASE_TWI 0xfffb8000
+#define AT91RM9200_BASE_EMAC 0xfffbc000
+#define AT91RM9200_BASE_US0 0xfffc0000
+#define AT91RM9200_BASE_US1 0xfffc4000
+#define AT91RM9200_BASE_US2 0xfffc8000
+#define AT91RM9200_BASE_US3 0xfffcc000
+#define AT91RM9200_BASE_SSC0 0xfffd0000
+#define AT91RM9200_BASE_SSC1 0xfffd4000
+#define AT91RM9200_BASE_SSC2 0xfffd8000
+#define AT91RM9200_BASE_SPI 0xfffe0000
#define AT91_BASE_SYS 0xfffff000
/*
+ * Internal Memory.
+ */
+#define AT91RM9200_ROM_BASE 0x00100000 /* Internal ROM base address */
+#define AT91RM9200_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */
+
+#define AT91RM9200_SRAM_BASE 0x00200000 /* Internal SRAM base address */
+#define AT91RM9200_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */
+
+#define AT91RM9200_UHP_BASE 0x00300000 /* USB Host controller */
+
+
+#if 0
+/*
* PIO pin definitions (peripheral A/B multiplexing).
*/
#define AT91_PA0_MISO (1 << 0) /* A: SPI Master-In Slave-Out */
@@ -257,5 +270,6 @@
#define AT91_PD25_TPK13 (1 << 25) /* B: ETM Trace Packet Port 13 */
#define AT91_PD26_TPK14 (1 << 26) /* B: ETM Trace Packet Port 14 */
#define AT91_PD27_TPK15 (1 << 27) /* B: ETM Trace Packet Port 15 */
+#endif
#endif
diff --git a/include/asm-arm/arch-at91rm9200/gpio.h b/include/asm-arm/arch-at91rm9200/gpio.h
index dbde1ba..6243f28 100644
--- a/include/asm-arm/arch-at91rm9200/gpio.h
+++ b/include/asm-arm/arch-at91rm9200/gpio.h
@@ -20,7 +20,7 @@
#define PQFP_GPIO_BANKS 3 /* PQFP package has 3 banks */
#define BGA_GPIO_BANKS 4 /* BGA package has 4 banks */
-/* these pin numbers double as IRQ numbers, like AT91_ID_* values */
+/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
#define AT91_PIN_PA0 (PIN_BASE + 0x00 + 0)
#define AT91_PIN_PA1 (PIN_BASE + 0x00 + 1)
diff --git a/include/asm-arm/arch-at91rm9200/hardware.h b/include/asm-arm/arch-at91rm9200/hardware.h
index 235d39d..878e65f 100644
--- a/include/asm-arm/arch-at91rm9200/hardware.h
+++ b/include/asm-arm/arch-at91rm9200/hardware.h
@@ -34,27 +34,23 @@
* Virtual to Physical Address mapping for IO devices.
*/
#define AT91_VA_BASE_SYS AT91_IO_P2V(AT91_BASE_SYS)
-#define AT91_VA_BASE_SPI AT91_IO_P2V(AT91_BASE_SPI)
-#define AT91_VA_BASE_SSC2 AT91_IO_P2V(AT91_BASE_SSC2)
-#define AT91_VA_BASE_SSC1 AT91_IO_P2V(AT91_BASE_SSC1)
-#define AT91_VA_BASE_SSC0 AT91_IO_P2V(AT91_BASE_SSC0)
-#define AT91_VA_BASE_US3 AT91_IO_P2V(AT91_BASE_US3)
-#define AT91_VA_BASE_US2 AT91_IO_P2V(AT91_BASE_US2)
-#define AT91_VA_BASE_US1 AT91_IO_P2V(AT91_BASE_US1)
-#define AT91_VA_BASE_US0 AT91_IO_P2V(AT91_BASE_US0)
-#define AT91_VA_BASE_EMAC AT91_IO_P2V(AT91_BASE_EMAC)
-#define AT91_VA_BASE_TWI AT91_IO_P2V(AT91_BASE_TWI)
-#define AT91_VA_BASE_MCI AT91_IO_P2V(AT91_BASE_MCI)
-#define AT91_VA_BASE_UDP AT91_IO_P2V(AT91_BASE_UDP)
-#define AT91_VA_BASE_TCB1 AT91_IO_P2V(AT91_BASE_TCB1)
-#define AT91_VA_BASE_TCB0 AT91_IO_P2V(AT91_BASE_TCB0)
-
-/* Internal SRAM */
-#define AT91_SRAM_BASE 0x00200000 /* Internal SRAM base address */
-#define AT91_SRAM_SIZE 0x00004000 /* Internal SRAM SIZE (16Kb) */
+#define AT91_VA_BASE_SPI AT91_IO_P2V(AT91RM9200_BASE_SPI)
+#define AT91_VA_BASE_SSC2 AT91_IO_P2V(AT91RM9200_BASE_SSC2)
+#define AT91_VA_BASE_SSC1 AT91_IO_P2V(AT91RM9200_BASE_SSC1)
+#define AT91_VA_BASE_SSC0 AT91_IO_P2V(AT91RM9200_BASE_SSC0)
+#define AT91_VA_BASE_US3 AT91_IO_P2V(AT91RM9200_BASE_US3)
+#define AT91_VA_BASE_US2 AT91_IO_P2V(AT91RM9200_BASE_US2)
+#define AT91_VA_BASE_US1 AT91_IO_P2V(AT91RM9200_BASE_US1)
+#define AT91_VA_BASE_US0 AT91_IO_P2V(AT91RM9200_BASE_US0)
+#define AT91_VA_BASE_EMAC AT91_IO_P2V(AT91RM9200_BASE_EMAC)
+#define AT91_VA_BASE_TWI AT91_IO_P2V(AT91RM9200_BASE_TWI)
+#define AT91_VA_BASE_MCI AT91_IO_P2V(AT91RM9200_BASE_MCI)
+#define AT91_VA_BASE_UDP AT91_IO_P2V(AT91RM9200_BASE_UDP)
+#define AT91_VA_BASE_TCB1 AT91_IO_P2V(AT91RM9200_BASE_TCB1)
+#define AT91_VA_BASE_TCB0 AT91_IO_P2V(AT91RM9200_BASE_TCB0)
/* Internal SRAM is mapped below the IO devices */
-#define AT91_SRAM_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_SIZE)
+#define AT91_SRAM_VIRT_BASE (AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE)
/* Serial ports */
#define AT91_NR_UART 5 /* 4 USART3's and one DBGU port */
@@ -71,9 +67,6 @@
/* Compact Flash */
#define AT91_CF_BASE 0x50000000 /* NCS4-NCS6: Compact Flash physical base address */
-/* Multi-Master Memory controller */
-#define AT91_UHP_BASE 0x00300000 /* USB Host controller */
-
/* Clocks */
#define AT91_SLOW_CLOCK 32768 /* slow clock */
diff --git a/include/asm-arm/arch-at91rm9200/irqs.h b/include/asm-arm/arch-at91rm9200/irqs.h
index f63842c..763cb96 100644
--- a/include/asm-arm/arch-at91rm9200/irqs.h
+++ b/include/asm-arm/arch-at91rm9200/irqs.h
@@ -32,7 +32,7 @@
/*
- * IRQ interrupt symbols are the AT91_ID_* symbols in at91rm9200.h
+ * IRQ interrupt symbols are the AT91xxx_ID_* symbols
* for IRQs handled directly through the AIC, or else the AT91_PIN_*
* symbols in gpio.h for ones handled indirectly as GPIOs.
* We make provision for 4 banks of GPIO.