| |
| The cpufreq-nforce2 driver changes the FSB on nVidia nForce2 platforms. |
| |
| This works better than on other platforms, because the FSB of the CPU |
| can be controlled independently from the PCI/AGP clock. |
| |
| The module has two options: |
| |
| fid: multiplier * 10 (for example 8.5 = 85) |
| min_fsb: minimum FSB |
| |
| If not set, fid is calculated from the current CPU speed and the FSB. |
| min_fsb defaults to FSB at boot time - 50 MHz. |
| |
| IMPORTANT: The available range is limited downwards! |
| Also the minimum available FSB can differ, for systems |
| booting with 200 MHz, 150 should always work. |
| |
| |