ARM: dts: imx23-evk: updates for mmc device
The 8-bit mode mmc has pin conflicts with display. Let's use 4-bit
mode by default, so that display can be enabled together later.
Also add vmmc-supply for mmc device.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
index 6a0912b..8321fa3 100644
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -25,9 +25,10 @@
ssp0: ssp@80010000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
- pinctrl-0 = <&mmc0_8bit_pins_a &mmc0_pins_fixup>;
- bus-width = <8>;
+ pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+ bus-width = <4>;
wp-gpios = <&gpio1 30 0>;
+ vmmc-supply = <®_vddio_sd0>;
status = "okay";
};
@@ -57,4 +58,16 @@
};
};
};
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_vddio_sd0: vddio-sd0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vddio-sd0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 29 0>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index 7274273..daade4fa 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -123,6 +123,22 @@
fsl,pull-up = <0>;
};
+ mmc0_4bit_pins_a: mmc0-4bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
+ 0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
+ 0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
+ 0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
+ 0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
+ 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
+ 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
+ >;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
mmc0_8bit_pins_a: mmc0-8bit@0 {
reg = <0>;
fsl,pinmux-ids = <