| /* Copyright (c) 2013-2017, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * RMNET Data ingress/egress handler |
| */ |
| |
| #include <linux/skbuff.h> |
| #include <linux/netdevice.h> |
| #include <linux/module.h> |
| #include <linux/rmnet_data.h> |
| #include <linux/net_map.h> |
| #include <linux/netdev_features.h> |
| #include <linux/ip.h> |
| #include <linux/ipv6.h> |
| #include <net/rmnet_config.h> |
| #include "rmnet_data_private.h" |
| #include "rmnet_data_config.h" |
| #include "rmnet_data_vnd.h" |
| #include "rmnet_map.h" |
| #include "rmnet_data_stats.h" |
| #include "rmnet_data_trace.h" |
| #include "rmnet_data_handlers.h" |
| |
| RMNET_LOG_MODULE(RMNET_DATA_LOGMASK_HANDLER); |
| |
| #ifdef CONFIG_RMNET_DATA_DEBUG_PKT |
| unsigned int dump_pkt_rx; |
| module_param(dump_pkt_rx, uint, 0644); |
| MODULE_PARM_DESC(dump_pkt_rx, "Dump packets entering ingress handler"); |
| |
| unsigned int dump_pkt_tx; |
| module_param(dump_pkt_tx, uint, 0644); |
| MODULE_PARM_DESC(dump_pkt_tx, "Dump packets exiting egress handler"); |
| #endif /* CONFIG_RMNET_DATA_DEBUG_PKT */ |
| |
| /* Time in nano seconds. This number must be less that a second. */ |
| long gro_flush_time __read_mostly = 10000L; |
| module_param(gro_flush_time, long, 0644); |
| MODULE_PARM_DESC(gro_flush_time, "Flush GRO when spaced more than this"); |
| |
| unsigned int gro_min_byte_thresh __read_mostly = 7500; |
| module_param(gro_min_byte_thresh, uint, 0644); |
| MODULE_PARM_DESC(gro_min_byte_thresh, "Min byte thresh to change flush time"); |
| |
| unsigned int dynamic_gro_on __read_mostly = 1; |
| module_param(dynamic_gro_on, uint, 0644); |
| MODULE_PARM_DESC(dynamic_gro_on, "Toggle to turn on dynamic gro logic"); |
| |
| unsigned int upper_flush_time __read_mostly = 15000; |
| module_param(upper_flush_time, uint, 0644); |
| MODULE_PARM_DESC(upper_flush_time, "Upper limit on flush time"); |
| |
| unsigned int upper_byte_limit __read_mostly = 10500; |
| module_param(upper_byte_limit, uint, 0644); |
| MODULE_PARM_DESC(upper_byte_limit, "Upper byte limit"); |
| |
| #define RMNET_DATA_IP_VERSION_4 0x40 |
| #define RMNET_DATA_IP_VERSION_6 0x60 |
| |
| #define RMNET_DATA_GRO_RCV_FAIL 0 |
| #define RMNET_DATA_GRO_RCV_PASS 1 |
| |
| /* Helper Functions */ |
| |
| /* __rmnet_data_set_skb_proto() - Set skb->protocol field |
| * @skb: packet being modified |
| * |
| * Peek at the first byte of the packet and set the protocol. There is not |
| * good way to determine if a packet has a MAP header. As of writing this, |
| * the reserved bit in the MAP frame will prevent it from overlapping with |
| * IPv4/IPv6 frames. This could change in the future! |
| */ |
| static inline void __rmnet_data_set_skb_proto(struct sk_buff *skb) |
| { |
| switch (skb->data[0] & 0xF0) { |
| case RMNET_DATA_IP_VERSION_4: |
| skb->protocol = htons(ETH_P_IP); |
| break; |
| case RMNET_DATA_IP_VERSION_6: |
| skb->protocol = htons(ETH_P_IPV6); |
| break; |
| default: |
| skb->protocol = htons(ETH_P_MAP); |
| break; |
| } |
| } |
| |
| #ifdef CONFIG_RMNET_DATA_DEBUG_PKT |
| /* rmnet_print_packet() - Print packet / diagnostics |
| * @skb: Packet to print |
| * @printlen: Number of bytes to print |
| * @dev: Name of interface |
| * @dir: Character representing direction (e.g.. 'r' for receive) |
| * |
| * This function prints out raw bytes in an SKB. Use of this will have major |
| * performance impacts and may even trigger watchdog resets if too much is being |
| * printed. Hence, this should always be compiled out unless absolutely needed. |
| */ |
| void rmnet_print_packet(const struct sk_buff *skb, const char *dev, char dir) |
| { |
| char buffer[200]; |
| unsigned int len, printlen; |
| int i, buffloc = 0; |
| |
| switch (dir) { |
| case 'r': |
| printlen = dump_pkt_rx; |
| break; |
| |
| case 't': |
| printlen = dump_pkt_tx; |
| break; |
| |
| default: |
| printlen = 0; |
| break; |
| } |
| |
| if (!printlen) |
| return; |
| |
| pr_err("[%s][%c] - PKT skb->len=%d skb->head=%pK skb->data=%pK\n", |
| dev, dir, skb->len, (void *)skb->head, (void *)skb->data); |
| pr_err("[%s][%c] - PKT skb->tail=%pK skb->end=%pK\n", |
| dev, dir, skb_tail_pointer(skb), skb_end_pointer(skb)); |
| |
| if (skb->len > 0) |
| len = skb->len; |
| else |
| len = ((unsigned int)(uintptr_t)skb->end) - |
| ((unsigned int)(uintptr_t)skb->data); |
| |
| pr_err("[%s][%c] - PKT len: %d, printing first %d bytes\n", |
| dev, dir, len, printlen); |
| |
| memset(buffer, 0, sizeof(buffer)); |
| for (i = 0; (i < printlen) && (i < len); i++) { |
| if ((i % 16) == 0) { |
| pr_err("[%s][%c] - PKT%s\n", dev, dir, buffer); |
| memset(buffer, 0, sizeof(buffer)); |
| buffloc = 0; |
| buffloc += snprintf(&buffer[buffloc], |
| sizeof(buffer) - buffloc, "%04X:", |
| i); |
| } |
| |
| buffloc += snprintf(&buffer[buffloc], sizeof(buffer) - buffloc, |
| " %02x", skb->data[i]); |
| } |
| pr_err("[%s][%c] - PKT%s\n", dev, dir, buffer); |
| } |
| #else |
| void rmnet_print_packet(const struct sk_buff *skb, const char *dev, char dir) |
| { |
| } |
| #endif /* CONFIG_RMNET_DATA_DEBUG_PKT */ |
| |
| /* Generic handler */ |
| |
| /* rmnet_bridge_handler() - Bridge related functionality |
| * |
| * Return: |
| * - RX_HANDLER_CONSUMED in all cases |
| */ |
| static rx_handler_result_t rmnet_bridge_handler |
| (struct sk_buff *skb, struct rmnet_logical_ep_conf_s *ep) |
| { |
| if (!ep->egress_dev) { |
| LOGD("Missing egress device for packet arriving on %s", |
| skb->dev->name); |
| rmnet_kfree_skb(skb, RMNET_STATS_SKBFREE_BRDG_NO_EGRESS); |
| } else { |
| rmnet_egress_handler(skb, ep); |
| } |
| |
| return RX_HANDLER_CONSUMED; |
| } |
| |
| #ifdef NET_SKBUFF_DATA_USES_OFFSET |
| static void rmnet_reset_mac_header(struct sk_buff *skb) |
| { |
| skb->mac_header = 0; |
| skb->mac_len = 0; |
| } |
| #else |
| static void rmnet_reset_mac_header(struct sk_buff *skb) |
| { |
| skb->mac_header = skb->network_header; |
| skb->mac_len = 0; |
| } |
| #endif /*NET_SKBUFF_DATA_USES_OFFSET*/ |
| |
| /* rmnet_check_skb_can_gro() - Check is skb can be passed through GRO handler |
| * |
| * Determines whether to pass the skb to the GRO handler napi_gro_receive() or |
| * handle normally by passing to netif_receive_skb(). |
| * |
| * Warning: |
| * This assumes that only TCP packets can be coalesced by the GRO handler which |
| * is not true in general. We lose the ability to use GRO for cases like UDP |
| * encapsulation protocols. |
| * |
| * Return: |
| * - RMNET_DATA_GRO_RCV_FAIL if packet is sent to netif_receive_skb() |
| * - RMNET_DATA_GRO_RCV_PASS if packet is sent to napi_gro_receive() |
| */ |
| static int rmnet_check_skb_can_gro(struct sk_buff *skb) |
| { |
| switch (skb->data[0] & 0xF0) { |
| case RMNET_DATA_IP_VERSION_4: |
| if (ip_hdr(skb)->protocol == IPPROTO_TCP) |
| return RMNET_DATA_GRO_RCV_PASS; |
| break; |
| case RMNET_DATA_IP_VERSION_6: |
| if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP) |
| return RMNET_DATA_GRO_RCV_PASS; |
| /* Fall through */ |
| } |
| |
| return RMNET_DATA_GRO_RCV_FAIL; |
| } |
| |
| /* rmnet_optional_gro_flush() - Check if GRO handler needs to flush now |
| * |
| * Determines whether GRO handler needs to flush packets which it has |
| * coalesced so far. |
| * |
| * Tuning this parameter will trade TCP slow start performance for GRO coalesce |
| * ratio. |
| */ |
| static void rmnet_optional_gro_flush(struct napi_struct *napi, |
| struct rmnet_logical_ep_conf_s *ep, |
| unsigned int skb_size) |
| { |
| struct timespec curr_time, diff; |
| |
| if (!gro_flush_time) |
| return; |
| |
| if (unlikely(ep->flush_time.tv_sec == 0)) { |
| getnstimeofday(&ep->flush_time); |
| ep->flush_byte_count = 0; |
| } else { |
| getnstimeofday(&(curr_time)); |
| diff = timespec_sub(curr_time, ep->flush_time); |
| ep->flush_byte_count += skb_size; |
| |
| if (dynamic_gro_on) { |
| if ((!(diff.tv_sec > 0) || diff.tv_nsec <= |
| gro_flush_time) && |
| ep->flush_byte_count >= |
| gro_min_byte_thresh) { |
| /* Processed many bytes in a small time window. |
| * No longer need to flush so often and we can |
| * increase our byte limit |
| */ |
| gro_flush_time = upper_flush_time; |
| gro_min_byte_thresh = upper_byte_limit; |
| } else if ((diff.tv_sec > 0 || |
| diff.tv_nsec > gro_flush_time) && |
| ep->flush_byte_count < |
| gro_min_byte_thresh) { |
| /* We have not hit our time limit and we are not |
| * receive many bytes. Demote ourselves to the |
| * lowest limits and flush |
| */ |
| napi_gro_flush(napi, false); |
| getnstimeofday(&ep->flush_time); |
| ep->flush_byte_count = 0; |
| gro_flush_time = 10000L; |
| gro_min_byte_thresh = 7500L; |
| } else if ((diff.tv_sec > 0 || |
| diff.tv_nsec > gro_flush_time) && |
| ep->flush_byte_count >= |
| gro_min_byte_thresh) { |
| /* Above byte and time limt, therefore we can |
| * move/maintain our limits to be the max |
| * and flush |
| */ |
| napi_gro_flush(napi, false); |
| getnstimeofday(&ep->flush_time); |
| ep->flush_byte_count = 0; |
| gro_flush_time = upper_flush_time; |
| gro_min_byte_thresh = upper_byte_limit; |
| } |
| /* else, below time limit and below |
| * byte thresh, so change nothing |
| */ |
| } else if (diff.tv_sec > 0 || |
| diff.tv_nsec >= gro_flush_time) { |
| napi_gro_flush(napi, false); |
| getnstimeofday(&ep->flush_time); |
| ep->flush_byte_count = 0; |
| } |
| } |
| } |
| |
| /* __rmnet_deliver_skb() - Deliver skb |
| * |
| * Determines where to deliver skb. Options are: consume by network stack, |
| * pass to bridge handler, or pass to virtual network device |
| * |
| * Return: |
| * - RX_HANDLER_CONSUMED if packet forwarded or dropped |
| * - RX_HANDLER_PASS if packet is to be consumed by network stack as-is |
| */ |
| static rx_handler_result_t __rmnet_deliver_skb |
| (struct sk_buff *skb, struct rmnet_logical_ep_conf_s *ep) |
| { |
| struct napi_struct *napi = NULL; |
| gro_result_t gro_res; |
| unsigned int skb_size; |
| |
| trace___rmnet_deliver_skb(skb); |
| switch (ep->rmnet_mode) { |
| case RMNET_EPMODE_NONE: |
| return RX_HANDLER_PASS; |
| |
| case RMNET_EPMODE_BRIDGE: |
| return rmnet_bridge_handler(skb, ep); |
| |
| case RMNET_EPMODE_VND: |
| skb_reset_transport_header(skb); |
| skb_reset_network_header(skb); |
| switch (rmnet_vnd_rx_fixup(skb, skb->dev)) { |
| case RX_HANDLER_CONSUMED: |
| return RX_HANDLER_CONSUMED; |
| |
| case RX_HANDLER_PASS: |
| skb->pkt_type = PACKET_HOST; |
| rmnet_reset_mac_header(skb); |
| if (rmnet_check_skb_can_gro(skb) && |
| (skb->dev->features & NETIF_F_GRO)) { |
| napi = get_current_napi_context(); |
| if (napi) { |
| skb_size = skb->len; |
| gro_res = napi_gro_receive(napi, skb); |
| trace_rmnet_gro_downlink(gro_res); |
| rmnet_optional_gro_flush(napi, ep, |
| skb_size); |
| } else { |
| WARN_ONCE(1, "current napi is NULL\n"); |
| netif_receive_skb(skb); |
| } |
| } else { |
| netif_receive_skb(skb); |
| } |
| return RX_HANDLER_CONSUMED; |
| } |
| return RX_HANDLER_PASS; |
| |
| default: |
| LOGD("Unknown ep mode %d", ep->rmnet_mode); |
| rmnet_kfree_skb(skb, RMNET_STATS_SKBFREE_DELIVER_NO_EP); |
| return RX_HANDLER_CONSUMED; |
| } |
| } |
| |
| /* rmnet_ingress_deliver_packet() - Ingress handler for raw IP and bridged |
| * MAP packets. |
| * @skb: Packet needing a destination. |
| * @config: Physical end point configuration that the packet arrived on. |
| * |
| * Return: |
| * - RX_HANDLER_CONSUMED if packet forwarded/dropped |
| * - RX_HANDLER_PASS if packet should be passed up the stack by caller |
| */ |
| static rx_handler_result_t rmnet_ingress_deliver_packet |
| (struct sk_buff *skb, struct rmnet_phys_ep_config *config) |
| { |
| if (!config) { |
| LOGD("%s", "NULL physical EP provided"); |
| kfree_skb(skb); |
| return RX_HANDLER_CONSUMED; |
| } |
| |
| if (!(config->local_ep.refcount)) { |
| LOGD("Packet on %s has no local endpoint configuration", |
| skb->dev->name); |
| rmnet_kfree_skb(skb, RMNET_STATS_SKBFREE_IPINGRESS_NO_EP); |
| return RX_HANDLER_CONSUMED; |
| } |
| |
| skb->dev = config->local_ep.egress_dev; |
| |
| return __rmnet_deliver_skb(skb, &config->local_ep); |
| } |
| |
| /* MAP handler */ |
| |
| /* _rmnet_map_ingress_handler() - Actual MAP ingress handler |
| * @skb: Packet being received |
| * @config: Physical endpoint configuration for the ingress device |
| * |
| * Most MAP ingress functions are processed here. Packets are processed |
| * individually; aggregated packets should use rmnet_map_ingress_handler() |
| * |
| * Return: |
| * - RX_HANDLER_CONSUMED if packet is dropped |
| * - result of __rmnet_deliver_skb() for all other cases |
| */ |
| static rx_handler_result_t _rmnet_map_ingress_handler |
| (struct sk_buff *skb, struct rmnet_phys_ep_config *config) |
| { |
| struct rmnet_logical_ep_conf_s *ep; |
| u8 mux_id; |
| u16 len; |
| int ckresult; |
| |
| if (RMNET_MAP_GET_CD_BIT(skb)) { |
| if (config->ingress_data_format |
| & RMNET_INGRESS_FORMAT_MAP_COMMANDS) |
| return rmnet_map_command(skb, config); |
| |
| LOGM("MAP command packet on %s; %s", skb->dev->name, |
| "Not configured for MAP commands"); |
| rmnet_kfree_skb(skb, |
| RMNET_STATS_SKBFREE_INGRESS_NOT_EXPECT_MAPC); |
| return RX_HANDLER_CONSUMED; |
| } |
| |
| mux_id = RMNET_MAP_GET_MUX_ID(skb); |
| len = RMNET_MAP_GET_LENGTH(skb) |
| - RMNET_MAP_GET_PAD(skb) |
| - config->tail_spacing; |
| |
| if (mux_id >= RMNET_DATA_MAX_LOGICAL_EP) { |
| LOGD("Got packet on %s with bad mux id %d", |
| skb->dev->name, mux_id); |
| rmnet_kfree_skb(skb, RMNET_STATS_SKBFREE_MAPINGRESS_BAD_MUX); |
| return RX_HANDLER_CONSUMED; |
| } |
| |
| ep = &config->muxed_ep[mux_id]; |
| |
| if (!ep->refcount) { |
| LOGD("Packet on %s:%d; has no logical endpoint config", |
| skb->dev->name, mux_id); |
| |
| rmnet_kfree_skb(skb, RMNET_STATS_SKBFREE_MAPINGRESS_MUX_NO_EP); |
| return RX_HANDLER_CONSUMED; |
| } |
| |
| if (config->ingress_data_format & RMNET_INGRESS_FORMAT_DEMUXING) |
| skb->dev = ep->egress_dev; |
| |
| if ((config->ingress_data_format & RMNET_INGRESS_FORMAT_MAP_CKSUMV3) || |
| (config->ingress_data_format & RMNET_INGRESS_FORMAT_MAP_CKSUMV4)) { |
| ckresult = rmnet_map_checksum_downlink_packet(skb); |
| trace_rmnet_map_checksum_downlink_packet(skb, ckresult); |
| rmnet_stats_dl_checksum(ckresult); |
| if (likely((ckresult == RMNET_MAP_CHECKSUM_OK) || |
| (ckresult == RMNET_MAP_CHECKSUM_SKIPPED))) |
| skb->ip_summed |= CHECKSUM_UNNECESSARY; |
| else if (ckresult != |
| RMNET_MAP_CHECKSUM_ERR_UNKNOWN_IP_VERSION && |
| ckresult != RMNET_MAP_CHECKSUM_ERR_UNKNOWN_TRANSPORT && |
| ckresult != RMNET_MAP_CHECKSUM_VALID_FLAG_NOT_SET && |
| ckresult != RMNET_MAP_CHECKSUM_FRAGMENTED_PACKET) { |
| rmnet_kfree_skb |
| (skb, RMNET_STATS_SKBFREE_INGRESS_BAD_MAP_CKSUM); |
| return RX_HANDLER_CONSUMED; |
| } |
| } |
| |
| /* Subtract MAP header */ |
| skb_pull(skb, sizeof(struct rmnet_map_header_s)); |
| skb_trim(skb, len); |
| __rmnet_data_set_skb_proto(skb); |
| return __rmnet_deliver_skb(skb, ep); |
| } |
| |
| /* rmnet_map_ingress_handler() - MAP ingress handler |
| * @skb: Packet being received |
| * @config: Physical endpoint configuration for the ingress device |
| * |
| * Called if and only if MAP is configured in the ingress device's ingress data |
| * format. Deaggregation is done here, actual MAP processing is done in |
| * _rmnet_map_ingress_handler(). |
| * |
| * Return: |
| * - RX_HANDLER_CONSUMED for aggregated packets |
| * - RX_HANDLER_CONSUMED for dropped packets |
| * - result of _rmnet_map_ingress_handler() for all other cases |
| */ |
| static rx_handler_result_t rmnet_map_ingress_handler |
| (struct sk_buff *skb, struct rmnet_phys_ep_config *config) |
| { |
| struct sk_buff *skbn; |
| int rc, co = 0; |
| |
| if (config->ingress_data_format & RMNET_INGRESS_FORMAT_DEAGGREGATION) { |
| trace_rmnet_start_deaggregation(skb); |
| while ((skbn = rmnet_map_deaggregate(skb, config)) != 0) { |
| _rmnet_map_ingress_handler(skbn, config); |
| co++; |
| } |
| trace_rmnet_end_deaggregation(skb, co); |
| LOGD("De-aggregated %d packets", co); |
| rmnet_stats_deagg_pkts(co); |
| rmnet_kfree_skb(skb, RMNET_STATS_SKBFREE_MAPINGRESS_AGGBUF); |
| rc = RX_HANDLER_CONSUMED; |
| } else { |
| rc = _rmnet_map_ingress_handler(skb, config); |
| } |
| |
| return rc; |
| } |
| |
| /* rmnet_map_egress_handler() - MAP egress handler |
| * @skb: Packet being sent |
| * @config: Physical endpoint configuration for the egress device |
| * @ep: logical endpoint configuration of the packet originator |
| * (e.g.. RmNet virtual network device) |
| * @orig_dev: The originator vnd device |
| * |
| * Called if and only if MAP is configured in the egress device's egress data |
| * format. Will expand skb if there is insufficient headroom for MAP protocol. |
| * Note: headroomexpansion will incur a performance penalty. |
| * |
| * Return: |
| * - 0 on success |
| * - 1 on failure |
| */ |
| static int rmnet_map_egress_handler(struct sk_buff *skb, |
| struct rmnet_phys_ep_config *config, |
| struct rmnet_logical_ep_conf_s *ep, |
| struct net_device *orig_dev) |
| { |
| int required_headroom, additional_header_length, ckresult; |
| struct rmnet_map_header_s *map_header; |
| |
| additional_header_length = 0; |
| |
| required_headroom = sizeof(struct rmnet_map_header_s); |
| if ((config->egress_data_format & RMNET_EGRESS_FORMAT_MAP_CKSUMV3) || |
| (config->egress_data_format & RMNET_EGRESS_FORMAT_MAP_CKSUMV4)) { |
| required_headroom += |
| sizeof(struct rmnet_map_ul_checksum_header_s); |
| additional_header_length += |
| sizeof(struct rmnet_map_ul_checksum_header_s); |
| } |
| |
| LOGD("headroom of %d bytes", required_headroom); |
| |
| if (skb_headroom(skb) < required_headroom) { |
| if (pskb_expand_head(skb, required_headroom, 0, GFP_KERNEL)) { |
| LOGD("Failed to add headroom of %d bytes", |
| required_headroom); |
| kfree_skb(skb); |
| return 1; |
| } |
| } |
| |
| if ((config->egress_data_format & RMNET_EGRESS_FORMAT_MAP_CKSUMV3) || |
| (config->egress_data_format & RMNET_EGRESS_FORMAT_MAP_CKSUMV4)) { |
| ckresult = rmnet_map_checksum_uplink_packet |
| (skb, orig_dev, config->egress_data_format); |
| trace_rmnet_map_checksum_uplink_packet(orig_dev, ckresult); |
| rmnet_stats_ul_checksum(ckresult); |
| } |
| |
| if ((!(config->egress_data_format & |
| RMNET_EGRESS_FORMAT_AGGREGATION)) || |
| ((orig_dev->features & NETIF_F_GSO) && skb_is_nonlinear(skb))) |
| map_header = rmnet_map_add_map_header |
| (skb, additional_header_length, RMNET_MAP_NO_PAD_BYTES); |
| else |
| map_header = rmnet_map_add_map_header |
| (skb, additional_header_length, RMNET_MAP_ADD_PAD_BYTES); |
| |
| if (!map_header) { |
| LOGD("%s", "Failed to add MAP header to egress packet"); |
| kfree_skb(skb); |
| return 1; |
| } |
| |
| if (config->egress_data_format & RMNET_EGRESS_FORMAT_MUXING) { |
| if (ep->mux_id == 0xff) |
| map_header->mux_id = 0; |
| else |
| map_header->mux_id = ep->mux_id; |
| } |
| |
| skb->protocol = htons(ETH_P_MAP); |
| |
| if (config->egress_data_format & RMNET_EGRESS_FORMAT_AGGREGATION) { |
| rmnet_map_aggregate(skb, config); |
| return RMNET_MAP_CONSUMED; |
| } |
| |
| return RMNET_MAP_SUCCESS; |
| } |
| |
| /* Ingress / Egress Entry Points */ |
| |
| /* rmnet_ingress_handler() - Ingress handler entry point |
| * @skb: Packet being received |
| * |
| * Processes packet as per ingress data format for receiving device. Logical |
| * endpoint is determined from packet inspection. Packet is then sent to the |
| * egress device listed in the logical endpoint configuration. |
| * |
| * Return: |
| * - RX_HANDLER_PASS if packet is not processed by handler (caller must |
| * deal with the packet) |
| * - RX_HANDLER_CONSUMED if packet is forwarded or processed by MAP |
| */ |
| rx_handler_result_t rmnet_ingress_handler(struct sk_buff *skb) |
| { |
| struct rmnet_phys_ep_config *config; |
| struct net_device *dev; |
| int rc; |
| |
| if (!skb) |
| return RX_HANDLER_CONSUMED; |
| |
| dev = skb->dev; |
| trace_rmnet_ingress_handler(skb); |
| rmnet_print_packet(skb, dev->name, 'r'); |
| |
| config = _rmnet_get_phys_ep_config(skb->dev); |
| |
| if (!config) { |
| LOGD("%s is not associated with rmnet_data", skb->dev->name); |
| kfree_skb(skb); |
| return RX_HANDLER_CONSUMED; |
| } |
| |
| /* Sometimes devices operate in ethernet mode even thouth there is no |
| * ethernet header. This causes the skb->protocol to contain a bogus |
| * value and the skb->data pointer to be off by 14 bytes. Fix it if |
| * configured to do so |
| */ |
| if (config->ingress_data_format & RMNET_INGRESS_FIX_ETHERNET) { |
| skb_push(skb, RMNET_ETHERNET_HEADER_LENGTH); |
| __rmnet_data_set_skb_proto(skb); |
| } |
| |
| if (config->ingress_data_format & RMNET_INGRESS_FORMAT_MAP) { |
| rc = rmnet_map_ingress_handler(skb, config); |
| } else { |
| switch (ntohs(skb->protocol)) { |
| case ETH_P_MAP: |
| if (config->local_ep.rmnet_mode == |
| RMNET_EPMODE_BRIDGE) { |
| rc = rmnet_ingress_deliver_packet(skb, config); |
| } else { |
| LOGD("MAP packet on %s; MAP not set", |
| dev->name); |
| rmnet_kfree_skb |
| (skb, |
| RMNET_STATS_SKBFREE_INGRESS_NOT_EXPECT_MAPD); |
| rc = RX_HANDLER_CONSUMED; |
| } |
| break; |
| |
| case ETH_P_ARP: |
| case ETH_P_IP: |
| case ETH_P_IPV6: |
| rc = rmnet_ingress_deliver_packet(skb, config); |
| break; |
| |
| default: |
| LOGD("Unknown skb->proto 0x%04X\n", |
| ntohs(skb->protocol) & 0xFFFF); |
| rc = RX_HANDLER_PASS; |
| } |
| } |
| |
| return rc; |
| } |
| |
| /* rmnet_rx_handler() - Rx handler callback registered with kernel |
| * @pskb: Packet to be processed by rx handler |
| * |
| * Standard kernel-expected footprint for rx handlers. Calls |
| * rmnet_ingress_handler with correctly formatted arguments |
| * |
| * Return: |
| * - Whatever rmnet_ingress_handler() returns |
| */ |
| rx_handler_result_t rmnet_rx_handler(struct sk_buff **pskb) |
| { |
| return rmnet_ingress_handler(*pskb); |
| } |
| |
| /* rmnet_egress_handler() - Egress handler entry point |
| * @skb: packet to transmit |
| * @ep: logical endpoint configuration of the packet originator |
| * (e.g.. RmNet virtual network device) |
| * |
| * Modifies packet as per logical endpoint configuration and egress data format |
| * for egress device configured in logical endpoint. Packet is then transmitted |
| * on the egress device. |
| */ |
| void rmnet_egress_handler(struct sk_buff *skb, |
| struct rmnet_logical_ep_conf_s *ep) |
| { |
| struct rmnet_phys_ep_config *config; |
| struct net_device *orig_dev; |
| int rc; |
| |
| orig_dev = skb->dev; |
| skb->dev = ep->egress_dev; |
| |
| config = _rmnet_get_phys_ep_config(skb->dev); |
| |
| if (!config) { |
| LOGD("%s is not associated with rmnet_data", skb->dev->name); |
| kfree_skb(skb); |
| return; |
| } |
| |
| LOGD("Packet going out on %s with egress format 0x%08X", |
| skb->dev->name, config->egress_data_format); |
| |
| if (config->egress_data_format & RMNET_EGRESS_FORMAT_MAP) { |
| switch (rmnet_map_egress_handler(skb, config, ep, orig_dev)) { |
| case RMNET_MAP_CONSUMED: |
| LOGD("%s", "MAP process consumed packet"); |
| return; |
| |
| case RMNET_MAP_SUCCESS: |
| break; |
| |
| default: |
| LOGD("MAP egress failed on packet on %s", |
| skb->dev->name); |
| rmnet_kfree_skb(skb, RMNET_STATS_SKBFREE_EGR_MAPFAIL); |
| return; |
| } |
| } |
| |
| if (ep->rmnet_mode == RMNET_EPMODE_VND) |
| rmnet_vnd_tx_fixup(skb, orig_dev); |
| |
| rmnet_print_packet(skb, skb->dev->name, 't'); |
| trace_rmnet_egress_handler(skb); |
| rc = dev_queue_xmit(skb); |
| if (rc != 0) { |
| LOGD("Failed to queue packet for transmission on [%s]", |
| skb->dev->name); |
| } |
| rmnet_stats_queue_xmit(rc, RMNET_STATS_QUEUE_XMIT_EGRESS); |
| } |