| /* |
| * arch/powerpc/platforms/powermac/low_i2c.c |
| * |
| * Copyright (C) 2003-2005 Ben. Herrenschmidt (benh@kernel.crashing.org) |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| * The linux i2c layer isn't completely suitable for our needs for various |
| * reasons ranging from too late initialisation to semantics not perfectly |
| * matching some requirements of the apple platform functions etc... |
| * |
| * This file thus provides a simple low level unified i2c interface for |
| * powermac that covers the various types of i2c busses used in Apple machines. |
| * For now, keywest, PMU and SMU, though we could add Cuda, or other bit |
| * banging busses found on older chipstes in earlier machines if we ever need |
| * one of them. |
| * |
| * The drivers in this file are synchronous/blocking. In addition, the |
| * keywest one is fairly slow due to the use of msleep instead of interrupts |
| * as the interrupt is currently used by i2c-keywest. In the long run, we |
| * might want to get rid of those high-level interfaces to linux i2c layer |
| * either completely (converting all drivers) or replacing them all with a |
| * single stub driver on top of this one. Once done, the interrupt will be |
| * available for our use. |
| */ |
| |
| #undef DEBUG |
| #undef DEBUG_LOW |
| |
| #include <linux/config.h> |
| #include <linux/types.h> |
| #include <linux/sched.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/adb.h> |
| #include <linux/pmu.h> |
| #include <linux/delay.h> |
| #include <linux/completion.h> |
| #include <asm/keylargo.h> |
| #include <asm/uninorth.h> |
| #include <asm/io.h> |
| #include <asm/prom.h> |
| #include <asm/machdep.h> |
| #include <asm/smu.h> |
| #include <asm/pmac_low_i2c.h> |
| |
| #ifdef DEBUG |
| #define DBG(x...) do {\ |
| printk(KERN_DEBUG "low_i2c:" x); \ |
| } while(0) |
| #else |
| #define DBG(x...) |
| #endif |
| |
| #ifdef DEBUG_LOW |
| #define DBG_LOW(x...) do {\ |
| printk(KERN_DEBUG "low_i2c:" x); \ |
| } while(0) |
| #else |
| #define DBG_LOW(x...) |
| #endif |
| |
| /* |
| * A bus structure. Each bus in the system has such a structure associated. |
| */ |
| struct pmac_i2c_bus |
| { |
| struct list_head link; |
| struct device_node *controller; |
| struct device_node *busnode; |
| int type; |
| int flags; |
| struct i2c_adapter *adapter; |
| void *hostdata; |
| int channel; /* some hosts have multiple */ |
| int mode; /* current mode */ |
| struct semaphore sem; |
| int opened; |
| int polled; /* open mode */ |
| |
| /* ops */ |
| int (*open)(struct pmac_i2c_bus *bus); |
| void (*close)(struct pmac_i2c_bus *bus); |
| int (*xfer)(struct pmac_i2c_bus *bus, u8 addrdir, int subsize, |
| u32 subaddr, u8 *data, int len); |
| }; |
| |
| static LIST_HEAD(pmac_i2c_busses); |
| |
| /* |
| * Keywest implementation |
| */ |
| |
| struct pmac_i2c_host_kw |
| { |
| struct semaphore mutex; /* Access mutex for use by |
| * i2c-keywest */ |
| void __iomem *base; /* register base address */ |
| int bsteps; /* register stepping */ |
| int speed; /* speed */ |
| }; |
| |
| /* Register indices */ |
| typedef enum { |
| reg_mode = 0, |
| reg_control, |
| reg_status, |
| reg_isr, |
| reg_ier, |
| reg_addr, |
| reg_subaddr, |
| reg_data |
| } reg_t; |
| |
| |
| /* Mode register */ |
| #define KW_I2C_MODE_100KHZ 0x00 |
| #define KW_I2C_MODE_50KHZ 0x01 |
| #define KW_I2C_MODE_25KHZ 0x02 |
| #define KW_I2C_MODE_DUMB 0x00 |
| #define KW_I2C_MODE_STANDARD 0x04 |
| #define KW_I2C_MODE_STANDARDSUB 0x08 |
| #define KW_I2C_MODE_COMBINED 0x0C |
| #define KW_I2C_MODE_MODE_MASK 0x0C |
| #define KW_I2C_MODE_CHAN_MASK 0xF0 |
| |
| /* Control register */ |
| #define KW_I2C_CTL_AAK 0x01 |
| #define KW_I2C_CTL_XADDR 0x02 |
| #define KW_I2C_CTL_STOP 0x04 |
| #define KW_I2C_CTL_START 0x08 |
| |
| /* Status register */ |
| #define KW_I2C_STAT_BUSY 0x01 |
| #define KW_I2C_STAT_LAST_AAK 0x02 |
| #define KW_I2C_STAT_LAST_RW 0x04 |
| #define KW_I2C_STAT_SDA 0x08 |
| #define KW_I2C_STAT_SCL 0x10 |
| |
| /* IER & ISR registers */ |
| #define KW_I2C_IRQ_DATA 0x01 |
| #define KW_I2C_IRQ_ADDR 0x02 |
| #define KW_I2C_IRQ_STOP 0x04 |
| #define KW_I2C_IRQ_START 0x08 |
| #define KW_I2C_IRQ_MASK 0x0F |
| |
| /* State machine states */ |
| enum { |
| state_idle, |
| state_addr, |
| state_read, |
| state_write, |
| state_stop, |
| state_dead |
| }; |
| |
| #define WRONG_STATE(name) do {\ |
| printk(KERN_DEBUG "KW: wrong state. Got %s, state: %s (isr: %02x)\n", \ |
| name, __kw_state_names[state], isr); \ |
| } while(0) |
| |
| static const char *__kw_state_names[] = { |
| "state_idle", |
| "state_addr", |
| "state_read", |
| "state_write", |
| "state_stop", |
| "state_dead" |
| }; |
| |
| static inline u8 __kw_read_reg(struct pmac_i2c_bus *bus, reg_t reg) |
| { |
| struct pmac_i2c_host_kw *host = bus->hostdata; |
| return readb(host->base + (((unsigned int)reg) << host->bsteps)); |
| } |
| |
| static inline void __kw_write_reg(struct pmac_i2c_bus *bus, reg_t reg, u8 val) |
| { |
| struct pmac_i2c_host_kw *host = bus->hostdata; |
| writeb(val, host->base + (((unsigned)reg) << host->bsteps)); |
| (void)__kw_read_reg(bus, reg_subaddr); |
| } |
| |
| #define kw_write_reg(reg, val) __kw_write_reg(bus, reg, val) |
| #define kw_read_reg(reg) __kw_read_reg(bus, reg) |
| |
| static u8 kw_i2c_wait_interrupt(struct pmac_i2c_bus* bus) |
| { |
| int i, j; |
| u8 isr; |
| |
| for (i = 0; i < 1000; i++) { |
| isr = kw_read_reg(reg_isr) & KW_I2C_IRQ_MASK; |
| if (isr != 0) |
| return isr; |
| |
| /* This code is used with the timebase frozen, we cannot rely |
| * on udelay nor schedule when in polled mode ! |
| * For now, just use a bogus loop.... |
| */ |
| if (bus->polled) { |
| for (j = 1; j < 1000000; j++) |
| mb(); |
| } else |
| msleep(1); |
| } |
| return isr; |
| } |
| |
| static int kw_i2c_handle_interrupt(struct pmac_i2c_bus *bus, int state, int rw, |
| int *rc, u8 **data, int *len, u8 isr) |
| { |
| u8 ack; |
| |
| DBG_LOW("kw_handle_interrupt(%s, isr: %x)\n", |
| __kw_state_names[state], isr); |
| |
| if (isr == 0) { |
| if (state != state_stop) { |
| DBG_LOW("KW: Timeout !\n"); |
| *rc = -EIO; |
| goto stop; |
| } |
| if (state == state_stop) { |
| ack = kw_read_reg(reg_status); |
| if (!(ack & KW_I2C_STAT_BUSY)) { |
| state = state_idle; |
| kw_write_reg(reg_ier, 0x00); |
| } |
| } |
| return state; |
| } |
| |
| if (isr & KW_I2C_IRQ_ADDR) { |
| ack = kw_read_reg(reg_status); |
| if (state != state_addr) { |
| kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR); |
| WRONG_STATE("KW_I2C_IRQ_ADDR"); |
| *rc = -EIO; |
| goto stop; |
| } |
| if ((ack & KW_I2C_STAT_LAST_AAK) == 0) { |
| *rc = -ENODEV; |
| DBG_LOW("KW: NAK on address\n"); |
| return state_stop; |
| } else { |
| if (rw) { |
| state = state_read; |
| if (*len > 1) |
| kw_write_reg(reg_control, |
| KW_I2C_CTL_AAK); |
| } else { |
| state = state_write; |
| kw_write_reg(reg_data, **data); |
| (*data)++; (*len)--; |
| } |
| } |
| kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR); |
| } |
| |
| if (isr & KW_I2C_IRQ_DATA) { |
| if (state == state_read) { |
| **data = kw_read_reg(reg_data); |
| (*data)++; (*len)--; |
| kw_write_reg(reg_isr, KW_I2C_IRQ_DATA); |
| if ((*len) == 0) |
| state = state_stop; |
| else if ((*len) == 1) |
| kw_write_reg(reg_control, 0); |
| } else if (state == state_write) { |
| ack = kw_read_reg(reg_status); |
| if ((ack & KW_I2C_STAT_LAST_AAK) == 0) { |
| DBG_LOW("KW: nack on data write\n"); |
| *rc = -EIO; |
| goto stop; |
| } else if (*len) { |
| kw_write_reg(reg_data, **data); |
| (*data)++; (*len)--; |
| } else { |
| kw_write_reg(reg_control, KW_I2C_CTL_STOP); |
| state = state_stop; |
| *rc = 0; |
| } |
| kw_write_reg(reg_isr, KW_I2C_IRQ_DATA); |
| } else { |
| kw_write_reg(reg_isr, KW_I2C_IRQ_DATA); |
| WRONG_STATE("KW_I2C_IRQ_DATA"); |
| if (state != state_stop) { |
| *rc = -EIO; |
| goto stop; |
| } |
| } |
| } |
| |
| if (isr & KW_I2C_IRQ_STOP) { |
| kw_write_reg(reg_isr, KW_I2C_IRQ_STOP); |
| if (state != state_stop) { |
| WRONG_STATE("KW_I2C_IRQ_STOP"); |
| *rc = -EIO; |
| } |
| return state_idle; |
| } |
| |
| if (isr & KW_I2C_IRQ_START) |
| kw_write_reg(reg_isr, KW_I2C_IRQ_START); |
| |
| return state; |
| |
| stop: |
| kw_write_reg(reg_control, KW_I2C_CTL_STOP); |
| return state_stop; |
| } |
| |
| static int kw_i2c_open(struct pmac_i2c_bus *bus) |
| { |
| struct pmac_i2c_host_kw *host = bus->hostdata; |
| down(&host->mutex); |
| return 0; |
| } |
| |
| static void kw_i2c_close(struct pmac_i2c_bus *bus) |
| { |
| struct pmac_i2c_host_kw *host = bus->hostdata; |
| up(&host->mutex); |
| } |
| |
| static int kw_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize, |
| u32 subaddr, u8 *data, int len) |
| { |
| struct pmac_i2c_host_kw *host = bus->hostdata; |
| u8 mode_reg = host->speed; |
| int state = state_addr; |
| int rc = 0; |
| |
| /* Setup mode & subaddress if any */ |
| switch(bus->mode) { |
| case pmac_i2c_mode_dumb: |
| return -EINVAL; |
| case pmac_i2c_mode_std: |
| mode_reg |= KW_I2C_MODE_STANDARD; |
| if (subsize != 0) |
| return -EINVAL; |
| break; |
| case pmac_i2c_mode_stdsub: |
| mode_reg |= KW_I2C_MODE_STANDARDSUB; |
| if (subsize != 1) |
| return -EINVAL; |
| break; |
| case pmac_i2c_mode_combined: |
| mode_reg |= KW_I2C_MODE_COMBINED; |
| if (subsize != 1) |
| return -EINVAL; |
| break; |
| } |
| |
| /* Setup channel & clear pending irqs */ |
| kw_write_reg(reg_isr, kw_read_reg(reg_isr)); |
| kw_write_reg(reg_mode, mode_reg | (bus->channel << 4)); |
| kw_write_reg(reg_status, 0); |
| |
| /* Set up address and r/w bit, strip possible stale bus number from |
| * address top bits |
| */ |
| kw_write_reg(reg_addr, addrdir & 0xff); |
| |
| /* Set up the sub address */ |
| if ((mode_reg & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_STANDARDSUB |
| || (mode_reg & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_COMBINED) |
| kw_write_reg(reg_subaddr, subaddr); |
| |
| /* Start sending address & disable interrupt*/ |
| kw_write_reg(reg_ier, 0 /*KW_I2C_IRQ_MASK*/); |
| kw_write_reg(reg_control, KW_I2C_CTL_XADDR); |
| |
| /* State machine, to turn into an interrupt handler in the future */ |
| while(state != state_idle) { |
| u8 isr = kw_i2c_wait_interrupt(bus); |
| state = kw_i2c_handle_interrupt(bus, state, addrdir & 1, &rc, |
| &data, &len, isr); |
| } |
| |
| return rc; |
| } |
| |
| static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np) |
| { |
| struct pmac_i2c_host_kw *host; |
| u32 *psteps, *prate, *addrp, steps; |
| |
| host = kzalloc(sizeof(struct pmac_i2c_host_kw), GFP_KERNEL); |
| if (host == NULL) { |
| printk(KERN_ERR "low_i2c: Can't allocate host for %s\n", |
| np->full_name); |
| return NULL; |
| } |
| |
| /* Apple is kind enough to provide a valid AAPL,address property |
| * on all i2c keywest nodes so far ... we would have to fallback |
| * to macio parsing if that wasn't the case |
| */ |
| addrp = (u32 *)get_property(np, "AAPL,address", NULL); |
| if (addrp == NULL) { |
| printk(KERN_ERR "low_i2c: Can't find address for %s\n", |
| np->full_name); |
| kfree(host); |
| return NULL; |
| } |
| init_MUTEX(&host->mutex); |
| psteps = (u32 *)get_property(np, "AAPL,address-step", NULL); |
| steps = psteps ? (*psteps) : 0x10; |
| for (host->bsteps = 0; (steps & 0x01) == 0; host->bsteps++) |
| steps >>= 1; |
| /* Select interface rate */ |
| host->speed = KW_I2C_MODE_25KHZ; |
| prate = (u32 *)get_property(np, "AAPL,i2c-rate", NULL); |
| if (prate) switch(*prate) { |
| case 100: |
| host->speed = KW_I2C_MODE_100KHZ; |
| break; |
| case 50: |
| host->speed = KW_I2C_MODE_50KHZ; |
| break; |
| case 25: |
| host->speed = KW_I2C_MODE_25KHZ; |
| break; |
| } |
| |
| printk(KERN_INFO "KeyWest i2c @0x%08x %s\n", *addrp, np->full_name); |
| host->base = ioremap((*addrp), 0x1000); |
| |
| return host; |
| } |
| |
| |
| static void __init kw_i2c_add(struct pmac_i2c_host_kw *host, |
| struct device_node *controller, |
| struct device_node *busnode, |
| int channel) |
| { |
| struct pmac_i2c_bus *bus; |
| |
| bus = kzalloc(sizeof(struct pmac_i2c_bus), GFP_KERNEL); |
| if (bus == NULL) |
| return; |
| |
| bus->controller = of_node_get(controller); |
| bus->busnode = of_node_get(busnode); |
| bus->type = pmac_i2c_bus_keywest; |
| bus->hostdata = host; |
| bus->channel = channel; |
| bus->mode = pmac_i2c_mode_std; |
| bus->open = kw_i2c_open; |
| bus->close = kw_i2c_close; |
| bus->xfer = kw_i2c_xfer; |
| init_MUTEX(&bus->sem); |
| if (controller == busnode) |
| bus->flags = pmac_i2c_multibus; |
| list_add(&bus->link, &pmac_i2c_busses); |
| |
| printk(KERN_INFO " channel %d bus %s\n", channel, |
| (controller == busnode) ? "<multibus>" : busnode->full_name); |
| } |
| |
| static void __init kw_i2c_probe(void) |
| { |
| struct device_node *np, *child, *parent; |
| |
| /* Probe keywest-i2c busses */ |
| for (np = NULL; |
| (np = of_find_compatible_node(np, "i2c","keywest-i2c")) != NULL;){ |
| struct pmac_i2c_host_kw *host; |
| int multibus, chans, i; |
| |
| /* Found one, init a host structure */ |
| host = kw_i2c_host_init(np); |
| if (host == NULL) |
| continue; |
| |
| /* Now check if we have a multibus setup (old style) or if we |
| * have proper bus nodes. Note that the "new" way (proper bus |
| * nodes) might cause us to not create some busses that are |
| * kept hidden in the device-tree. In the future, we might |
| * want to work around that by creating busses without a node |
| * but not for now |
| */ |
| child = of_get_next_child(np, NULL); |
| multibus = !child || strcmp(child->name, "i2c-bus"); |
| of_node_put(child); |
| |
| /* For a multibus setup, we get the bus count based on the |
| * parent type |
| */ |
| if (multibus) { |
| parent = of_get_parent(np); |
| if (parent == NULL) |
| continue; |
| chans = parent->name[0] == 'u' ? 2 : 1; |
| for (i = 0; i < chans; i++) |
| kw_i2c_add(host, np, np, i); |
| } else { |
| for (child = NULL; |
| (child = of_get_next_child(np, child)) != NULL;) { |
| u32 *reg = |
| (u32 *)get_property(child, "reg", NULL); |
| if (reg == NULL) |
| continue; |
| kw_i2c_add(host, np, child, *reg); |
| } |
| } |
| } |
| } |
| |
| |
| /* |
| * |
| * PMU implementation |
| * |
| */ |
| |
| #ifdef CONFIG_ADB_PMU |
| |
| /* |
| * i2c command block to the PMU |
| */ |
| struct pmu_i2c_hdr { |
| u8 bus; |
| u8 mode; |
| u8 bus2; |
| u8 address; |
| u8 sub_addr; |
| u8 comb_addr; |
| u8 count; |
| u8 data[]; |
| }; |
| |
| static void pmu_i2c_complete(struct adb_request *req) |
| { |
| complete(req->arg); |
| } |
| |
| static int pmu_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize, |
| u32 subaddr, u8 *data, int len) |
| { |
| struct adb_request *req = bus->hostdata; |
| struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req->data[1]; |
| struct completion comp; |
| int read = addrdir & 1; |
| int retry; |
| int rc = 0; |
| |
| /* For now, limit ourselves to 16 bytes transfers */ |
| if (len > 16) |
| return -EINVAL; |
| |
| init_completion(&comp); |
| |
| for (retry = 0; retry < 16; retry++) { |
| memset(req, 0, sizeof(struct adb_request)); |
| hdr->bus = bus->channel; |
| hdr->count = len; |
| |
| switch(bus->mode) { |
| case pmac_i2c_mode_std: |
| if (subsize != 0) |
| return -EINVAL; |
| hdr->address = addrdir; |
| hdr->mode = PMU_I2C_MODE_SIMPLE; |
| break; |
| case pmac_i2c_mode_stdsub: |
| case pmac_i2c_mode_combined: |
| if (subsize != 1) |
| return -EINVAL; |
| hdr->address = addrdir & 0xfe; |
| hdr->comb_addr = addrdir; |
| hdr->sub_addr = subaddr; |
| if (bus->mode == pmac_i2c_mode_stdsub) |
| hdr->mode = PMU_I2C_MODE_STDSUB; |
| else |
| hdr->mode = PMU_I2C_MODE_COMBINED; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| INIT_COMPLETION(comp); |
| req->data[0] = PMU_I2C_CMD; |
| req->reply[0] = 0xff; |
| req->nbytes = sizeof(struct pmu_i2c_hdr) + 1; |
| req->done = pmu_i2c_complete; |
| req->arg = ∁ |
| if (!read) { |
| memcpy(hdr->data, data, len); |
| req->nbytes += len; |
| } |
| rc = pmu_queue_request(req); |
| if (rc) |
| return rc; |
| wait_for_completion(&comp); |
| if (req->reply[0] == PMU_I2C_STATUS_OK) |
| break; |
| msleep(15); |
| } |
| if (req->reply[0] != PMU_I2C_STATUS_OK) |
| return -EIO; |
| |
| for (retry = 0; retry < 16; retry++) { |
| memset(req, 0, sizeof(struct adb_request)); |
| |
| /* I know that looks like a lot, slow as hell, but darwin |
| * does it so let's be on the safe side for now |
| */ |
| msleep(15); |
| |
| hdr->bus = PMU_I2C_BUS_STATUS; |
| |
| INIT_COMPLETION(comp); |
| req->data[0] = PMU_I2C_CMD; |
| req->reply[0] = 0xff; |
| req->nbytes = 2; |
| req->done = pmu_i2c_complete; |
| req->arg = ∁ |
| rc = pmu_queue_request(req); |
| if (rc) |
| return rc; |
| wait_for_completion(&comp); |
| |
| if (req->reply[0] == PMU_I2C_STATUS_OK && !read) |
| return 0; |
| if (req->reply[0] == PMU_I2C_STATUS_DATAREAD && read) { |
| int rlen = req->reply_len - 1; |
| |
| if (rlen != len) { |
| printk(KERN_WARNING "low_i2c: PMU returned %d" |
| " bytes, expected %d !\n", rlen, len); |
| return -EIO; |
| } |
| memcpy(data, &req->reply[1], len); |
| return 0; |
| } |
| } |
| return -EIO; |
| } |
| |
| static void __init pmu_i2c_probe(void) |
| { |
| struct pmac_i2c_bus *bus; |
| struct device_node *busnode; |
| int channel, sz; |
| |
| if (!pmu_present()) |
| return; |
| |
| /* There might or might not be a "pmu-i2c" node, we use that |
| * or via-pmu itself, whatever we find. I haven't seen a machine |
| * with separate bus nodes, so we assume a multibus setup |
| */ |
| busnode = of_find_node_by_name(NULL, "pmu-i2c"); |
| if (busnode == NULL) |
| busnode = of_find_node_by_name(NULL, "via-pmu"); |
| if (busnode == NULL) |
| return; |
| |
| printk(KERN_INFO "PMU i2c %s\n", busnode->full_name); |
| |
| /* |
| * We add bus 1 and 2 only for now, bus 0 is "special" |
| */ |
| for (channel = 1; channel <= 2; channel++) { |
| sz = sizeof(struct pmac_i2c_bus) + sizeof(struct adb_request); |
| bus = kzalloc(sz, GFP_KERNEL); |
| if (bus == NULL) |
| return; |
| |
| bus->controller = busnode; |
| bus->busnode = busnode; |
| bus->type = pmac_i2c_bus_pmu; |
| bus->channel = channel; |
| bus->mode = pmac_i2c_mode_std; |
| bus->hostdata = bus + 1; |
| bus->xfer = pmu_i2c_xfer; |
| init_MUTEX(&bus->sem); |
| bus->flags = pmac_i2c_multibus; |
| list_add(&bus->link, &pmac_i2c_busses); |
| |
| printk(KERN_INFO " channel %d bus <multibus>\n", channel); |
| } |
| } |
| |
| #endif /* CONFIG_ADB_PMU */ |
| |
| |
| /* |
| * |
| * SMU implementation |
| * |
| */ |
| |
| #ifdef CONFIG_PMAC_SMU |
| |
| static void smu_i2c_complete(struct smu_i2c_cmd *cmd, void *misc) |
| { |
| complete(misc); |
| } |
| |
| static int smu_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize, |
| u32 subaddr, u8 *data, int len) |
| { |
| struct smu_i2c_cmd *cmd = bus->hostdata; |
| struct completion comp; |
| int read = addrdir & 1; |
| int rc = 0; |
| |
| memset(cmd, 0, sizeof(struct smu_i2c_cmd)); |
| cmd->info.bus = bus->channel; |
| cmd->info.devaddr = addrdir; |
| cmd->info.datalen = len; |
| |
| switch(bus->mode) { |
| case pmac_i2c_mode_std: |
| if (subsize != 0) |
| return -EINVAL; |
| cmd->info.type = SMU_I2C_TRANSFER_SIMPLE; |
| break; |
| case pmac_i2c_mode_stdsub: |
| case pmac_i2c_mode_combined: |
| if (subsize > 3 || subsize < 1) |
| return -EINVAL; |
| cmd->info.sublen = subsize; |
| /* that's big-endian only but heh ! */ |
| memcpy(&cmd->info.subaddr, ((char *)&subaddr) + (4 - subsize), |
| subsize); |
| if (bus->mode == pmac_i2c_mode_stdsub) |
| cmd->info.type = SMU_I2C_TRANSFER_STDSUB; |
| else |
| cmd->info.type = SMU_I2C_TRANSFER_COMBINED; |
| break; |
| default: |
| return -EINVAL; |
| } |
| if (!read) |
| memcpy(cmd->info.data, data, len); |
| |
| init_completion(&comp); |
| cmd->done = smu_i2c_complete; |
| cmd->misc = ∁ |
| rc = smu_queue_i2c(cmd); |
| if (rc < 0) |
| return rc; |
| wait_for_completion(&comp); |
| rc = cmd->status; |
| |
| if (read) |
| memcpy(data, cmd->info.data, len); |
| return rc < 0 ? rc : 0; |
| } |
| |
| static void __init smu_i2c_probe(void) |
| { |
| struct device_node *controller, *busnode; |
| struct pmac_i2c_bus *bus; |
| u32 *reg; |
| int sz; |
| |
| if (!smu_present()) |
| return; |
| |
| controller = of_find_node_by_name(NULL, "smu_i2c_control"); |
| if (controller == NULL) |
| controller = of_find_node_by_name(NULL, "smu"); |
| if (controller == NULL) |
| return; |
| |
| printk(KERN_INFO "SMU i2c %s\n", controller->full_name); |
| |
| /* Look for childs, note that they might not be of the right |
| * type as older device trees mix i2c busses and other thigns |
| * at the same level |
| */ |
| for (busnode = NULL; |
| (busnode = of_get_next_child(controller, busnode)) != NULL;) { |
| if (strcmp(busnode->type, "i2c") && |
| strcmp(busnode->type, "i2c-bus")) |
| continue; |
| reg = (u32 *)get_property(busnode, "reg", NULL); |
| if (reg == NULL) |
| continue; |
| |
| sz = sizeof(struct pmac_i2c_bus) + sizeof(struct smu_i2c_cmd); |
| bus = kzalloc(sz, GFP_KERNEL); |
| if (bus == NULL) |
| return; |
| |
| bus->controller = controller; |
| bus->busnode = of_node_get(busnode); |
| bus->type = pmac_i2c_bus_smu; |
| bus->channel = *reg; |
| bus->mode = pmac_i2c_mode_std; |
| bus->hostdata = bus + 1; |
| bus->xfer = smu_i2c_xfer; |
| init_MUTEX(&bus->sem); |
| bus->flags = 0; |
| list_add(&bus->link, &pmac_i2c_busses); |
| |
| printk(KERN_INFO " channel %x bus %s\n", |
| bus->channel, busnode->full_name); |
| } |
| } |
| |
| #endif /* CONFIG_PMAC_SMU */ |
| |
| /* |
| * |
| * Core code |
| * |
| */ |
| |
| |
| struct pmac_i2c_bus *pmac_i2c_find_bus(struct device_node *node) |
| { |
| struct device_node *p = of_node_get(node); |
| struct device_node *prev = NULL; |
| struct pmac_i2c_bus *bus; |
| |
| while(p) { |
| list_for_each_entry(bus, &pmac_i2c_busses, link) { |
| if (p == bus->busnode) { |
| if (prev && bus->flags & pmac_i2c_multibus) { |
| u32 *reg; |
| reg = (u32 *)get_property(prev, "reg", |
| NULL); |
| if (!reg) |
| continue; |
| if (((*reg) >> 8) != bus->channel) |
| continue; |
| } |
| of_node_put(p); |
| of_node_put(prev); |
| return bus; |
| } |
| } |
| of_node_put(prev); |
| prev = p; |
| p = of_get_parent(p); |
| } |
| return NULL; |
| } |
| EXPORT_SYMBOL_GPL(pmac_i2c_find_bus); |
| |
| u8 pmac_i2c_get_dev_addr(struct device_node *device) |
| { |
| u32 *reg = (u32 *)get_property(device, "reg", NULL); |
| |
| if (reg == NULL) |
| return 0; |
| |
| return (*reg) & 0xff; |
| } |
| EXPORT_SYMBOL_GPL(pmac_i2c_get_dev_addr); |
| |
| struct device_node *pmac_i2c_get_controller(struct pmac_i2c_bus *bus) |
| { |
| return bus->controller; |
| } |
| EXPORT_SYMBOL_GPL(pmac_i2c_get_controller); |
| |
| struct device_node *pmac_i2c_get_bus_node(struct pmac_i2c_bus *bus) |
| { |
| return bus->busnode; |
| } |
| EXPORT_SYMBOL_GPL(pmac_i2c_get_bus_node); |
| |
| int pmac_i2c_get_type(struct pmac_i2c_bus *bus) |
| { |
| return bus->type; |
| } |
| EXPORT_SYMBOL_GPL(pmac_i2c_get_type); |
| |
| int pmac_i2c_get_flags(struct pmac_i2c_bus *bus) |
| { |
| return bus->flags; |
| } |
| EXPORT_SYMBOL_GPL(pmac_i2c_get_flags); |
| |
| void pmac_i2c_attach_adapter(struct pmac_i2c_bus *bus, |
| struct i2c_adapter *adapter) |
| { |
| WARN_ON(bus->adapter != NULL); |
| bus->adapter = adapter; |
| } |
| EXPORT_SYMBOL_GPL(pmac_i2c_attach_adapter); |
| |
| void pmac_i2c_detach_adapter(struct pmac_i2c_bus *bus, |
| struct i2c_adapter *adapter) |
| { |
| WARN_ON(bus->adapter != adapter); |
| bus->adapter = NULL; |
| } |
| EXPORT_SYMBOL_GPL(pmac_i2c_detach_adapter); |
| |
| struct i2c_adapter *pmac_i2c_get_adapter(struct pmac_i2c_bus *bus) |
| { |
| return bus->adapter; |
| } |
| EXPORT_SYMBOL_GPL(pmac_i2c_get_adapter); |
| |
| extern int pmac_i2c_match_adapter(struct device_node *dev, |
| struct i2c_adapter *adapter) |
| { |
| struct pmac_i2c_bus *bus = pmac_i2c_find_bus(dev); |
| |
| if (bus == NULL) |
| return 0; |
| return (bus->adapter == adapter); |
| } |
| EXPORT_SYMBOL_GPL(pmac_i2c_match_adapter); |
| |
| int pmac_low_i2c_lock(struct device_node *np) |
| { |
| struct pmac_i2c_bus *bus, *found = NULL; |
| |
| list_for_each_entry(bus, &pmac_i2c_busses, link) { |
| if (np == bus->controller) { |
| found = bus; |
| break; |
| } |
| } |
| if (!found) |
| return -ENODEV; |
| return pmac_i2c_open(bus, 0); |
| } |
| EXPORT_SYMBOL_GPL(pmac_low_i2c_lock); |
| |
| int pmac_low_i2c_unlock(struct device_node *np) |
| { |
| struct pmac_i2c_bus *bus, *found = NULL; |
| |
| list_for_each_entry(bus, &pmac_i2c_busses, link) { |
| if (np == bus->controller) { |
| found = bus; |
| break; |
| } |
| } |
| if (!found) |
| return -ENODEV; |
| pmac_i2c_close(bus); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(pmac_low_i2c_unlock); |
| |
| |
| int pmac_i2c_open(struct pmac_i2c_bus *bus, int polled) |
| { |
| int rc; |
| |
| down(&bus->sem); |
| bus->polled = polled; |
| bus->opened = 1; |
| bus->mode = pmac_i2c_mode_std; |
| if (bus->open && (rc = bus->open(bus)) != 0) { |
| bus->opened = 0; |
| up(&bus->sem); |
| return rc; |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(pmac_i2c_open); |
| |
| void pmac_i2c_close(struct pmac_i2c_bus *bus) |
| { |
| WARN_ON(!bus->opened); |
| if (bus->close) |
| bus->close(bus); |
| bus->opened = 0; |
| up(&bus->sem); |
| } |
| EXPORT_SYMBOL_GPL(pmac_i2c_close); |
| |
| int pmac_i2c_setmode(struct pmac_i2c_bus *bus, int mode) |
| { |
| WARN_ON(!bus->opened); |
| |
| /* Report me if you see the error below as there might be a new |
| * "combined4" mode that I need to implement for the SMU bus |
| */ |
| if (mode < pmac_i2c_mode_dumb || mode > pmac_i2c_mode_combined) { |
| printk(KERN_ERR "low_i2c: Invalid mode %d requested on" |
| " bus %s !\n", mode, bus->busnode->full_name); |
| return -EINVAL; |
| } |
| bus->mode = mode; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(pmac_i2c_setmode); |
| |
| int pmac_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize, |
| u32 subaddr, u8 *data, int len) |
| { |
| int rc; |
| |
| WARN_ON(!bus->opened); |
| |
| DBG("xfer() chan=%d, addrdir=0x%x, mode=%d, subsize=%d, subaddr=0x%x," |
| " %d bytes, bus %s\n", bus->channel, addrdir, bus->mode, subsize, |
| subaddr, len, bus->busnode->full_name); |
| |
| rc = bus->xfer(bus, addrdir, subsize, subaddr, data, len); |
| |
| #ifdef DEBUG |
| if (rc) |
| DBG("xfer error %d\n", rc); |
| #endif |
| return rc; |
| } |
| EXPORT_SYMBOL_GPL(pmac_i2c_xfer); |
| |
| /* |
| * Initialize us: probe all i2c busses on the machine and instantiate |
| * busses. |
| */ |
| /* This is non-static as it might be called early by smp code */ |
| int __init pmac_i2c_init(void) |
| { |
| static int i2c_inited; |
| |
| if (i2c_inited) |
| return 0; |
| i2c_inited = 1; |
| |
| /* Probe keywest-i2c busses */ |
| kw_i2c_probe(); |
| |
| #ifdef CONFIG_ADB_PMU |
| pmu_i2c_probe(); |
| #endif |
| |
| #ifdef CONFIG_PMAC_SMU |
| smu_i2c_probe(); |
| #endif |
| |
| return 0; |
| } |
| arch_initcall(pmac_i2c_init); |
| |